New Tmobile HD2 can't install most cabs - HD2 General

I have been trying since I got my phone to be able to install cabs. There are only a very few that I can install no matter how I try. It doesn't matter if I download to sd card and install to card, download to card and install to device, or download and install to device. About 90-95% won't install it simply states uninstallable.
I was able to install sdcard certs hoping that might be my problem but it didn't help. Just the other day sirphunkee who has been trying to help me found a security manager that I ran through ActiveSync and I turned off security. There were no directions but I think I did it correctly however still it didn't help me.
This phone is brand new, only about a week old. Is it possible they changed the ROM and Radio and that's what is causing me all the problems? I have
ROM 2.13.531.1 (90963) WWE and Radio 2.10.50.26 the rest of the software is OS version 5.2.21892 (21892.5.0.89), Manilla version 2.5.20121412.2, and Protocol version 15.39.50.07U. I'm not sure if these other things matter but I thought I'd state them just in case.
I could use some help anyone have an idea. I don't understand this, I can't download hardly anything. A coupld of the cabs I have tried and can't, BsB tweaks 1.6, and Grooveshark, there have been more but I don't remember the names right now.

Opera 10
Do you have opera 10 open? some cabs wont install in my phone if I have opera 10 Running.

robrob777 said:
Do you have opera 10 open? some cabs wont install in my phone if I have opera 10 Running.
Click to expand...
Click to collapse
It's not 10, 9.7 I believe.

I figured that this was the place if anywhere I could get help. I've only had 4-5 people try. Thanks to those that have.

Related

Phone hangs

Howdy
I use the exec as my phone and have a bit of an issue. I have found that the phone hangs and I don't get calls (go straight to VM ) no rings etc.
when I try to dial out it says service not available
I reset the device ad all is fine.
the only thing I can think on is Magic Button
I have uninstalled it for now to be sure.
is there a better phone to use then the one with the Exec?
I am looking for any assistance with this.
I have all my apps installed on the 1g SD card
including Ewallet, Pocket PC Bible,
I had magic button installed but since have gotten rid of it.
any other info I can provide to help in diagnosis just ask
im having alike issue too alto didnt install aplicaltion uch as yours,
the only thing i got is a video player from a 3rdparty and an SNES emulator..
my hpne sometime is not taking the call and send them to VM too but worst soemtime it switch off on my self !
so im gonna try WM6 now and see if it fixes the issue [email protected]
timhellsten said:
Howdy
I use the exec as my phone and have a bit of an issue. I have found that the phone hangs and I don't get calls (go straight to VM ) no rings etc.
when I try to dial out it says service not available
I reset the device ad all is fine.
the only thing I can think on is Magic Button
I have uninstalled it for now to be sure.
is there a better phone to use then the one with the Exec?
I am looking for any assistance with this.
I have all my apps installed on the 1g SD card
including Ewallet, Pocket PC Bible,
I had magic button installed but since have gotten rid of it.
any other info I can provide to help in diagnosis just ask
Click to expand...
Click to collapse
did u try hard resetting the device! perhaps that may help. by the way which version of ROM you got on your phone.
Phone Hangs
Hello here is my phone data
Device O2 XDA
OS: Win Mobile 5.0 build 14847.2.0.0
ROM 1.30.107 WWE
ROM Date 04/11/06
RADIO Version 1.09.00
Protocol Version 42.42.p8
EXTRom Version 1.30.162 WWE
I have the device set in corporate mode with code from this forum
Software installed
Ewallet on SD Card
Olive tree bible on SD Card
Removed magic Button (remove programs)
any thoughts
Help needed... want a more stable device..
timhellsten said:
Hello here is my phone data
Device O2 XDA
OS: Win Mobile 5.0 build 14847.2.0.0
ROM 1.30.107 WWE
ROM Date 04/11/06
RADIO Version 1.09.00
Protocol Version 42.42.p8
EXTRom Version 1.30.162 WWE
I have the device set in corporate mode with code from this forum
Software installed
Ewallet on SD Card
Olive tree bible on SD Card
Removed magic Button (remove programs)
any thoughts
Help needed... want a more stable device..
Click to expand...
Click to collapse
That's strange because the O2 standard ROM (AKU 2) is usually quite stable and quick. I wonder if the problem may lie in running your apps from SD card (which tends to be slower than the internal memory unless the card is fastand reliable) - maybe this is slowing the phone down and causing it to miss calls.
A number of suggestions - try first uninstalling all your apps and reinstalling them one by one testing the phone as you go. That may show the culprit app. If that doesn't work, try reflashing the ROM (using the software on the O2 xda website). If that doesn't work, try upgrading the radio to 1.14.1. I find this very stable on O2. If that doesn't work, try upgrading the CE ROM (you might like to start with one of the AKU 3.3 or 3.5 ROMs). If that doesn't work, you may be looking at a hardware fault.
If you need to know how to upgrade a ROM - read the wiki (several times if you've not done it before!)
Will try
Howdy
Will try your suggestions for sure.
Thanks very much for the help...
Tim

T-Mobile Wing Flashing

Hello everyone. I'm new to the website and I'm very interested in flashing my T-Mobile Wing. I just have a quick question for you guys. Is there anyway to go back to factory default, pretty much put in back to its original out of the box state if i flash the phone? Also, will i still be able to use the My Faves or does that have nothing to do with this? Thanks for all the help and i look forward to learning more about this.
Gigabit
Yes. You can download a T-Mobile Wing OEM RUU (search the forums for it) to get back to normal.
My Faves doesn't need the MyFaves app. I used MyFaves for about a year on my non-MyFaves Moto PEBL before getting the Wing. I just use Touch-IT 4.4 with the HTCHome plugin and just assign my myfaves numbers to the first 5 slots so 'simulate' the ease. I've always thought the MyFaves app was rather buggy, but there's a CAB floating around that you can install if you still want it. I just change my contacts via mytmobile online.
It's not too hard as long as you follow all the directions. Read them twice through if you have to.
thanks for the quick response. I just have one other question at this point. i've been look all over the place and cant seem to find what the newest version of Touch-It is. Can you please post a link to the newest version when every you have some time. I can't wait to get started.
Thanks!
Gig
These are the newest versions of Touch-IT.
NEW - Touch-IT v6.1.3 - Clean (updated with UC)
Touch-IT wm6.1 19199.1.0.0 - Full
Touch-IT wm6.1 19199.1.0.0 - ITsBlack
Touch-IT v4.4 and 4.41 WWE P4350
There was a small problem with the wm6.1 versions where the MMS wasn't working correctly, and I'm not sure if that has been fixed... but ITJE's roms are awesome and you can't go wrong with them.
You'll need to install my keyboard fix
KEYBOARD FIX for WING / HERALD & ROM hardware keyboard (keybddr.dll) mismatch
First off, Thank you so much for the fast responsces. Second, after a nice LONG day at the hospital with my daughter i sat down to start the flashing process. As i started reading some of the directions i saw something mentioned about Hard-SPL. My question to you guys is this: once i download the Touch version that i want, is that all i need? or do i need to look more into this and find Hard-SPL. please let me know whenever you have some time.
Thank You,
Gig
All you need to do is follow this link
http://forum.xda-developers.com/showthread.php?t=358225
HARDSPL is basically just flashing a rom.. so once youre done with it, all you have to do is install the Rom you want.
ok so, when i run Hard-SPL it starts to do its thing but stops at 4% and comes up with Update Error "Error 270". I've tried re-downloading the Hard-SPL file and uninstalled/reinstalled ActiveSync. I also installed all the .cab files in this order: canonyang, disablesecurity, asergpolicy, followed by a softrest. any ideas what the problem might be. Please let me know when you have some time. Thanks for all the help guys.
Gig
Try restoring back to the default ROM that comes from the factory by downloading it from the first post here:
http://forum.xda-developers.com/showthread.php?t=321717
After that then try flashing with hard-spl and then to the new TouchIt.
By the way I recommend
Touch-IT wm6.1 19199.1.0.0 - Full
I have a T-mobile wing and that one works best for me. (of course you will have to run the keyboard fix cab and x-box cab as indicated in the previous posts after installing Touch-IT wm6)
i have yet to flash any ROM to the wing. it is still factory default. Should i still try to reinstall the new ROM using the link you provided? Thanks for all your help.
edit: after backing up all my crap i reinstalled the ROM using the RUU from the above post and everything went OK but I'm still getting the same Error when i try to run the Hard-SPL while in the bootloader screen i get "Error 270" at about the 2% mark. if i try to run the Hard-SPL while not in the bootloader screen i get "Error 202". please let me know if you have any other advice to get past this small issue.
Thanks,
Gig
gigabit3 said:
i have yet to flash any ROM to the wing. it is still factory default. Should i still try to reinstall the new ROM using the link you provided? Thanks for all your help.
edit: after backing up all my crap i reinstalled the ROM using the RUU from the above post and everything went OK but I'm still getting the same Error when i try to run the Hard-SPL while in the bootloader screen i get "Error 270" at about the 2% mark. if i try to run the Hard-SPL while not in the bootloader screen i get "Error 202". please let me know if you have any other advice to get past this small issue.
Thanks,
Gig
Click to expand...
Click to collapse
Are you sure you ran the 3 cab files first (inside of the Wing with your stylus) and then did the softreset on your Wing (by pressing the little button on the side of your wing with the tip of your stylus) prior to running the ROM exe file (on your large desktop PC)?
The 3 cabs should be run in the order that is given.
yes, after i installed the 3 .cab files i did a soft reset. I held the camera button and pushed in the reset button with the stylus. then once i was in the screen with the different colors i ran Hard-SPL from my desktop computer.
edit:
after reading what i was typing i tried it again and it worked. just call me stupid. SOFT REST! those two words will hunt me forever. Thanks for all your help. not its time to start blowing crap up. lol
Thanks a bunch
Gig
If I remember the instructions, you're supposed to run the hardspl when the phone is running WM.... so basically, install the 3 cabs, reset, wait for it to reach your today screen... connect to activesync, then run hardspl.
that is correct sir. Thats how i was reading it but then doing it a different way. i dunno what i was thinking. Thank you so much for all your help. i have successfully installed Hard-SPL and Touch 4.4 full. I also over clocked from 201 to 247 with no issues. Applied your keyboard fix and the mms fix along with the Internet fix. all is working perfect. thanks again for all the help. i'll definitely will be browsing the sit more to see what else i can learn.
Thanks,
Gig

Compact Framework

Tried installing PocketSheild, and get an errormissing method exception this app requires a newer version of MS.net compact Framework than the version instaled on this device (?? the phone is only 3 weks old ??)
How do you find which version is on the phone? Whats the implications of installing a newer version (and which one do i choose!)?
thanks
\windows\cgautil.exe will tell you. I think WM 6.1 only comes with CF2.0 by default, although HTC certainly could have put CF3.5 in their default installer software (stuff that installs once only after a hard reset). I can't tell whether mine did this or whether I did it by hand. Nevertheless, you should be able to download/install it from here: http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en. There should be no issue installing it side-by-side with 2.0.
thanks, managed to downoad it, but how do you install it?
If you don't use Activesync, you may want to get just the cab file instead. Just google for NETCFv35.wm.armv4i.cab, then instal like any other app, to the main memory.
Also, whilst you're about it, google netcfcfg.cab. This app lets you set windows CF policy, so that all apps which need CF2.0 to run will automatically use your newly installed CF3.5, which is apparently better and more stable.
The file sizes should be 2644KB and 34KB respectively.
wsb_champ said:
thanks, managed to downoad it, but how do you install it?
Click to expand...
Click to collapse
Run it on your PC and then next time you connect your device via activesync, it will push and install the CAB on your phone. Well, that's the idea anyway..
.NET 3.5 probs still not solved
Sorry, but I dont have any idea how to solve my problems.
there are several apps (.cabs) which I cannot install on my device, neither on internal nor on external (sd-card) memory.
the device (htc 3600) still keep answering: this version is still part of the ROM.
but I stay with my problems and dont wont to risk a HR.
Any Ideas?
thxs in advance
seeraeuber said:
Sorry, but I dont have any idea how to solve my problems.
there are several apps (.cabs) which I cannot install on my device, neither on internal nor on external (sd-card) memory.
the device (htc 3600) still keep answering: this version is still part of the ROM.
but I stay with my problems and dont wont to risk a HR.
Any Ideas?
thxs in advance
Click to expand...
Click to collapse
Try the HTC 3600 forum section, I guess they might know more relevant information. http://forum.xda-developers.com/forumdisplay.php?f=313
cheers!!!
works just fine. copy NETCFv35.wm.armv4i.cab, install, soft reset and you're ready to go. Thanks!!!

Problems installing cabs on T-mobile HD2

I am having problems installing cabs on my new HD2 with T-mobile. About 90% of the ones I try just say uninstallable after I save them. I tried to download the BsB tweak cab and same thing. I tried to download .NetCF 3.5 and it won't install either. Can anyone give me an idea, and also is there a place on my phone I can find out what .NetCF I'm running? Do the HD2's already have 3.5 on them? I've done a search on here to try and find answers but nothing yet.
Try a Soft Reset, see if that helps...if not Hard Reset
zoth said:
Try a Soft Reset, see if that helps...if not Hard Reset
Click to expand...
Click to collapse
Hold on, not just yet on the hard-reset...
amstaff, what exactly happens when you try to install CF3.5? Are you trying it from a cab or a desktop installer?
sirphunkee- I'm trying it from a cab. .NetCF keeps saying this is a previous version, that's why I was wondering if I have 3.5 already. I don't know where to look and see. I tried to download a cab off modaco that says which version is running but I can't install that cab. It's one that just says uninstallable.
amstaff72 said:
sirphunkee- I'm trying it from a cab. .NetCF keeps saying this is a previous version, that's why I was wondering if I have 3.5 already. I don't know where to look and see. I tried to download a cab off modaco that says which version is running but I can't install that cab. It's one that just says uninstallable.
Click to expand...
Click to collapse
Yeah you know what, I thought I had to put 3.5 on here when I first got it, but I remember now that it was never needed so I assumed it was already on here.
Whatever is causing your problem, I don't think it's CF3.5, because I never put it on and I have BsB Tweak running just fine, and I've never had installation issues like that. So yeah, I think a hard-reset might be a good place to start, to try to get whatever is interefering with your installs cleared up.
I tried a hard reset and still the same problems. Things download I just can't install most of them. I need some help.
amstaff72 said:
I tried a hard reset and still the same problems. Things download I just can't install most of them. I need some help.
Click to expand...
Click to collapse
Are you saving them to the SD card and running them from there? If so, try one running on the phone instead...just to rule out any issue with the card.
I tried that too. It still wont let me install. Is there some safety thing or something I need to disable? I remember in Vista microsoft made it impossible to delete and download some files, did they do something like that on winmo 6.5? It was like you had to have the administrator rights or something. I don't know what's going on, but customizing a windows phone is one of it"s best attributes, I can't even install any games. I need some help, please!
man...this is a chin scratcher never heard of any thing like this before. maybe it has something to do with the certificates. have you tried installing a free app from the marketplace that came on the phone. im curious if that would work.where are you getting the cabs you are trying to install. try something from freeware pocket pc.net
Yeah, the only apps that should potentially give you issues for insufficient rights when installing are homebrewed ones like those found here...but as long as you have sdkcerts installed even those shouldn't do that. But it sounds like the issue here goes beyond that because you're trying to install things that shouldn't need that anyway
NetCF 3.5
amstaff72 said:
sirphunkee- I'm trying it from a cab. .NetCF keeps saying this is a previous version, that's why I was wondering if I have 3.5 already. I don't know where to look and see. I tried to download a cab off modaco that says which version is running but I can't install that cab. It's one that just says uninstallable.
Click to expand...
Click to collapse
T-Mobile HD2 (US) already has NetCF 3.5 installed.
I have tried cabs from here and from places like pocketpc.net and so many won't install. There are some that do but like I said about 90% don't. What is the sdkcerts or whatever, I don't think I have that do I need it to install some cabs? Please someone give me some Ideas. Thanks for letting me know about NetCF 3.5 I was wondering about that. But again need some ideas for the cabs. Thanks for the help and ideas so far.
I just tried to download and install the sdk certs cab. It downloaded and installed but I still can't install most cabs. I tried BsB tweaks again and it still says "BsB Tweaks uninstallable". Do I need to install the sdk certs somewhere special or can I just install it like normal?
amstaff72 said:
I just tried to download and install the sdk certs cab. It downloaded and installed but I still can't install most cabs. I tried BsB tweaks again and it still says "BsB Tweaks uninstallable". Do I need to install the sdk certs somewhere special or can I just install it like normal?
Click to expand...
Click to collapse
You just install it like normal, it sounds like it went on fine for you....so the problem has to be somewhere else, but I'm really still at a loss on this one. I don't know what other cabs/apps you're trying, but I know BsB installed on mine without a hitch.
Let me ask you this....when you're using file explorer to navigate to a cab you want to install, do you do it in landscape mode? And then, as soon as you click the cab, you filp to portrait? I just remembered that whenever I did that, it killed the install, and I would need to click the cab to run it while in portrait mode. Just a thought.
Is there a place I need to check or something that maybe makes me administrator that could be guest or something right now?
sirphunkee-when I download and install cabs I click the link, it sends me to the save screen, I most of the time save to my card and then install...but I have tried to save to the hard drive and install but it doesn't seem to matter which way I do it. When I save and install, I just leave the phone in the regular position, I don't turn it on its side. Some of the apps I've tried to install as cabs that didn't work are grooveshark for 6.5 from pocketpc.net, BsB Tweaks from here, there was a couple of others I just tried to see if they would work from 1800pocketpc and they didn't work either. Only a few are installing without any problem. Thanks for your help sirphunkee, I appreciate it.

[Q] Certificate problems

Hi..
Tried the latest Android Froyo build on my phone with some interesting results.
I downloaded Froyo, copied the Android folder to my SD card, hit CLRCAD and then Haret. Froyo started booting, but after 4-5 lines all stopped. There was nothing happening after 15-20 min, so i pulled the battery, and started the phone again.
Now i get the message (in Norwegian)
"The file <filename> cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
The problem is that none of the programs installed on the SD-card runs. They all get the above error.
I can not install any programs (reg editors) because i again get the above message. My registry editor that is already installed wont work, and i can not install anything.
I have tried Googling the problem and i've also searched the forums here in XDA. But i have not found anything that actually might work, because they all wants to install something. I can not install anything, and all of my 3'rd party apps doesn't work.
How do i disable the certificate verification without having to install anything or run any 3'rd part apps??
Is there maybe any program that i can run from my Win7 computer??
Thanks for all informing answers..
Certificate problem?
Exactly the same thing happens to me. Bump!
I'm also having this problem, seems to affect .exe files regardless of whether they are on the SD Card or on the device itself. Same cause as well.
2 reasons may be:
Either you run a stock rom and you need to install certinstaller search here on xda or run a custom rom
Or the sdcard is corrupt so you have to reformat
When you post issues pls give details as well like what hspl, rom, radio you use so people could help you out
Sent from my HTC Desire using Tapatalk
Stock Rom
juicecultus said:
2 reasons may be:
Either you run a stock rom and you need to install certinstaller search here on xda or run a custom rom
Or the sdcard is corrupt so you have to reformat
When you post issues pls give details as well like what hspl, rom, radio you use so people could help you out
Sent from my HTC Desire using Tapatalk
Click to expand...
Click to collapse
Hmm, yeah, it's a stock ROM (for now). I cant't install anything so the certinstaller can't help me.... Now i have to find out how to run a custom ROM.
I have also reformatted the SD-cart with no luck.
My (for now) stock phone:
Manila: 2.5.19211619.0
ROM: 1.66.409.1 (76641) NOR
Radio: 2.06.51.07
Using a custom ROM as a base for Android will heed much better results.
Full instructions for flashing a custom ROM are found here (and here for TMOUS HD2).
^^^ Also I notice you have an old radio (2.06). I'm quite sure you need a 2.10 or 2.12 radio for Android...most people seem to have had the best results from 2.12. You will learn how to do that in the link above I just gave you.
As well, there are programs that allow you to edit the registry while connected via activesync that don't require installing anything on the phone.
Case closed
Well, it seemed like a good time to reset the phone now...
While having this problem, i upgraded the SPL with no problem.
Downloaded the newest Dutty-rom, and tried to upgrade, but because no 3'rd part progs will run, this didn't work. I had to hard reset the phone, and then upgrade the ROM and then the Radio.
Everything seems OK so far...
Thanks for all replies
any luck? i m having the same problem

Categories

Resources