Hi,
I am trying to make my G-sensor working after flash. I flashed to Don Salari's ROM (clean) and since then G sensor is dead. Of course it was working before that.
I can't even make HTC calibration program working - I successfully install it, make soft reset but clicking on the icon does nothing. I tried some reinstalls and other versions. Also tried Accelerometer Calibrator, but the same result - clicking on icon does nothing.
GSen (SKKV Software) - Auto Rotation with G-Sensor support for many applications --- this app works - white dot on the top appears, but Gsens still dead.
I searched many topics here, but nothing and I am getting bored, I like this ROM but I would like to have Gsens working either
Any ideas ? Thanks..
Same problem here... tried on two devices... MDA Compact IV and HTC Diamond Touch... after flashing this ROM g-sensor doesn't work anymore...
Any suggestions?
update: i just re-flashed it with MTTY and g-sensor still not working... but working on both devices with other ROMs... any tips out here?
Same here G not working! i think its a tweaked ROM its not that clean! DonSalari pick up the phoneeee and answer what to do mAn!!??
Related
Yesterday I upgraded my BA (T-mobile MDA 3) from WM2003 to WM6. It works fine, bit I can't fix the mms prolem...tryed to instal the cabs from "cabs".rar", but simply it isn't working. The device is from croatia and works on T-mobile.
Can anyone help????
Read ALL this thread, and we'll find some answers.
Thank you....I figured out.
BUT......
I have an other problem...after every soft reset, none of the buttons is working (except the green and red call). Is there any application that bypasses the system buttons setup? I found an app <AE Button Plus>, but the functions are poor ;(
Did you hard reset after flashing the rom ? I mean the N/Y/Y option thing
yeah, I followed the steps.... Every thing is fine now.
It's really funny.....when I fix one problem, new one shows up ;(
Now I need a bluetooth manager.
i installed wm6 the other day on my spvc500 and everything went well.
the phone started, but when i gave it a restart, it just wouldnt connect to my network...
it stays in NO service state and does nothing...
i really dont know what to do...please, help me...
i'm freakin for not knowing what to do....
WM6 problem & SPVC 500
HI,
I had the same problem and I know explanations.
Problem is in software which you installed after flashing WM6 to your SPV.
When you installing software everything is working on 100% ,but after restaring mobile
phone starting very long time ,doesn't have signal and time on main screen.
You have only one option ,re-flash WM6 again ![/COLOR]
Uninstall software hasn't influence!!!
be carefully with installation new software, I don't know where is problem exactly >
Here is list of software which is working without problems on my phone:
Extreme agenda 3.02
Smart explorer 2.1.4.553
SP Task Manager 2.1.1.315
Slovo ED
Adobe reader
Don't install :
profile switcher
cele task
If you are using different software you have only one way how to find "good" and "wrong" software.
After reflashing WM6 install only one program and restart the phone if everything will be working program is OK.
But if no you have to reflash WM6 again !!!
Be careful, all your data will be lost.
I got the same problem, after installing some software i got no network anymore.
Also the menue did not respond anymore on pressing 'Start'-button
I had to flash my Amadeus again, because also a hard-reset didn't help.
Now i think i have installed all the software again and it works still well
edit: 10 minutes after i rebooted my amadeus and BANG, nothing works anymore.
Crap.
I think the problem is 'facade', a tool to show a schedule on the homescreen.
it all works now
well, i managed to solve my problem...
the thing was to flash this WM6 and now everything works jut fine...
i can finally say that i am pleased with my c500!
Before I try this Version of WM6: Do you use Facade?
I flashed my Amadeus with WM5, installed Facade, rebooted and nothing worked. After that I flashed WM 6, did not install Facade and everything is ok
I got the same problem, but after hard reset everything was ok, so reflashing WM6 was not necessary.
i flashed a new touch-it rom and everything was ok but i felt it was a bit slow on my x1 for some reason, so i decided to change a few settings and once i exited, my screen stopped working.. any ideas? all i changed was like cache and the pressure thingy for touch flo... now only hardware buttons work
i know its my falt but maybe some1 has an idea? ive been trying to reflash it but i cant get it to go into active sync hahaha man this sux
ok, back to trying now
update: i flashed to a diff touch-it rom sooo im ok again.
(sry for the wasted thread you guys)
Hi,
Today I tried ti install WM 6.5 for the first time. Up to now, I was using Blue Elves and it was working just fine for one year almost.
However, I am facing the same problem I had one year ago, when I was installing Blue Elves - my phone restarts whenever I want to turn off the screen by pressing the power button!
Last year I solved the problem by installing Blue Elves with 24mb pagepool (none of the other pagepool settings worked), and it was working perfectly. However, I don't see any new roms with 24mb pagepool. I tried changing the pagepool size with poolpager changer, but it's not working (I get some error messages); I tried doing it manually, but I can't find the hex values I am supposed to find...
I searched the whole forum several times, but I can't seem to get any good response...
Thanks
Kurt2 said:
Hi,
Today I tried ti install WM 6.5 for the first time. Up to now, I was using Blue Elves and it was working just fine for one year almost.
However, I am facing the same problem I had one year ago, when I was installing Blue Elves - my phone restarts whenever I want to turn off the screen by pressing the power button!
Last year I solved the problem by installing Blue Elves with 24mb pagepool (none of the other pagepool settings worked), and it was working perfectly. However, I don't see any new roms with 24mb pagepool. I tried changing the pagepool size with poolpager changer, but it's not working (I get some error messages); I tried doing it manually, but I can't find the hex values I am supposed to find...
I searched the whole forum several times, but I can't seem to get any good response...
Thanks
Click to expand...
Click to collapse
Buddy,
Sometimes there might be problem with the ROM. Try to re flash the ROM or switch to other ROM.
Try below ROM which is light and good for Elf. Thank you
[ROM][WM6.5][Elfin] Build 23071
I didn't try with just one ROM; I tried with 4-5 wm 6.5 roms and onyx wm 6.1 rom and with all of them the same thing happens... I think I already tried this rom, but I am gonna try it one more time...
Tried it, the same problem.
Btw, I forgot to mention that only ROM which is working for me is the original one, which matches my CID.
FIXED IT!!!
I think the problem was that I was using USPL 1.*** and I was supposed to use 2.***
It's working FINALLY!!!
Hi all,
I have had my Vega for two weeks now and my G-Sensor has stopped working. I am currently running Fuji-Vega Modded Rom based on Modaco Rom v0.7.
I have put back the original rom back on from the Vega website Version 1.10 but the G-Sensor still done not work.
How can I check if there is a problem with the hardware before I take to back PC World/Currys.
Many Thanks
Pav
Hi PavSingh!
I also have the same problem, the gsensor stoped working. No screen rotation and also the games doesn`t works.
I have Corvus5 with SP1.
Someone have the same problem? how can i fix it?
Thanks
Have you tried a reboot. I have had this a couple of times and a reboot has fixed it
yes, I also wipe and reinstall corvus5 and corvus5sp1 and the accelerometer doesn`t work
I am starting to think that something on the sensor is broken
Thanks
try to move the switch on top of the tablet...
Ok thanks a lot. The problem was that switch, i think that switch is to lock the buttons not to lock the gsensor. The kids have been playing with it and the have changed the switch.
Thanks a lot.