i just recently got a mytouch 3g 1.2 and was flashing according to unlockr but didnt relize it was for mytouch and not mytouch1.2 so i flashed the sappimg.zip and since then i havent been able to flash any .zip's becasue ruu says that the system hangs on unzipping of the system part
heres the info of my phone as of right now
sapphire unknown 32a ship s-on H
hboot - 1.33.0009 (sapp31000)
cpld -13
radio - 3.22.20.17
pls help i have acces to hboot and fastboot but i get a failure error on some objects i try to run
please help thx you
bump the boat, someone please help im begging and willing to pay 20$ to anyone who helps me to fix this other than returning it to tmobile or using my insurance
tweakistry said:
i just recently got a mytouch 3g 1.2 and was flashing according to unlockr but didnt relize it was for mytouch and not mytouch1.2 so i flashed the sappimg.zip and since then i havent been able to flash any .zip's becasue ruu says that the system hangs on unzipping of the system part
heres the info of my phone as of right now
sapphire unknown 32a ship s-on H
hboot - 1.33.0009 (sapp31000)
cpld -13
radio - 3.22.20.17
pls help i have acces to hboot and fastboot but i get a failure error on some objects i try to run
please help thx you
Click to expand...
Click to collapse
If you have a Mytouch 3G 1.2 then you've got the wrong spl and radio. Should be
Sapphire pvt 32a ship s-on g
hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
Go back to unlockr and find the directions for rooting the mytouch 1.2/LE. You'll need to make a gold card. Hopefully that'll be able to get you running again. If not you'll need more experienced help than I can offer.
ya i tried that it boots the system part first and then freezes and unzipping
Did you try re-downloading the file from the site? It may have been corrupted during download.
yes i have
Did you get this working tweakistry?
no i have not, going to run to tmobile store today and tell them they shipped me a candaian phone and not a tmobile phone =p
ok so went to the tmobile store, they sayed theyve never seen a rogers phone they did an imei check and proved it was their phone and told me to pay for shipping it back and they will reimburse me and send me new phone
tweakistry said:
ok so went to the tmobile store, they sayed theyve never seen a rogers phone they did an imei check and proved it was their phone and told me to pay for shipping it back and they will reimburse me and send me new phone
Click to expand...
Click to collapse
They are pretty stupid hahaha
I made the same mistake hopefully I can get T-mobile to send me a new one too. lol if any one has any other ideas i would appropriate it.
Same thing happened to me, and I got it to work...
It was hanging on zip, so I had to redo rooting from the beginning (pushing files with adb)
But, adb didn't seem to detect the phone, what happened is that it started to want to use an old driver (I forgot which version, but if you connect to windows it should pop up and say it can't find it)...
If adb does work, try the root from the beginning, and keep on pushing despite it hanging on zip...
was a while ago, so can't really remember what happened exactly
You have to go back into adb and flash the right radio and spl again. It did the same thing to me when I rooted.
Related
Hi guys, dont know if I have asked this question in the right place, but here goes. I have had my magic 32b on Vodafone for 8 months, and for the last 6 I have been using Fatal1ty's hero/rosie rom with mainly satisfaction, after disabling the touch-flo home screen nonsense. There were a few issues that niggled me so I tried to hunt down a newer version. Somehow, after upgrading successfully to CM5 and liking the look, I backed up via nandroid and flashed a new rom. I am now stuck with a T-Mobile mt3g rom which wont let me get passed the google sign up screen, and my data package is not in service until monday.
here is what my details look like as of now......
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 (SAPP10000)
CPLD-10
RADIO-2.22.19.261
I have read so many posts now that im not sure where to start. I would like to know if there is a SAPPimg available to overcome this problem, i cannot access phone via adb or fastboot as i have no custom recovery installed anymore and no access via fastboot as remote is not allowed!
My hair is turning ever greyer, any help would be amazing.
(already tried the goldcard routine with no avail, but maybe i did it wrong.)
Peace
Ok i was trying update spl and radio well stuff went bad now i downloaded that app thing flashed everything now my phone wont go into Amon Ra or start up it just says htc magic.
ok i was trying to update radio and spl and install a new rom i guess i did it wrong so now i cant boot my phone or go into recovery only fastboot. im getting really mad i downloaded the radio app thing and I'v been messing with that changing the radio,recovery,and spl nothing also every time i try to do the sappimg it frezzes on the system i think thats the first one but then i finally got it to update then it froze again on radiov2 please help me
updatek i got it to ok system
ok userdata
ok boot
ok bootloader
radiov2 froze wtf help
updatek so i skipped the sapimg step went to command list typed all the way to fastboot flash radio radio.img then it sent it really fast then froze on writing radio at 95% wtf any suggestions
I have A
SAPPHIRE PVT 32A ENG S-OFF H
HBOOT-1.76.2007 (SAPP31000
CPLD-13
RADIO-6.35.10.10
AUG 21 2009,18:19:15
I can get into fastboot
its a 32a it has a 3.35 jack at the the top
ok i got it to ok system
ok userdata
ok boot
ok bootloader
radiov2 froze wtf help
ok so i skipped the sapimg step went to command list typed all the way to fastboot flash radio radio.img then it sent it really fast then froze on writing radio at 95% wtf any suggestions
Binary, could you please merge this with http://forum.xda-developers.com/showthread.php?t=744211 and http://forum.xda-developers.com/showthread.php?t=744450?
ricmiester, as far as I remember CPLD-13 is for MyTouch 3G Fender / LE, which means you flashed the wrong radio and spl. Make a goldcard and use the rooting tutorial at the unlockr (google it) to fix it.
i can put it into fastboot and thats really it.it boots but stays on htc magic and its not letting me go into recovery also when i try and change the radio it doesnt let me
sapphire pvt 32a eng s-off h
hboot-1.76.2007 (sapp31000)
radio-2.22.23.02
aug 21 2009,19:19:15
i already made a gold card do i need to make another
No. Since you were able to flash the wrong sappimg (congrats, by the way), I'm guessing it's working just fine. Follow the rooting tutorial at the unlockr.
ahhah ok ill try it again ill massage back with progress in a minute
ok i put the sappimg on the memory card then fastbooted it when i clicked the trackball it froze on system its stuck unziping
Follow this tutorial by DonJuan692006 http://forum.xda-developers.com/showthread.php?t=734617 starting with "II. Flash the Sappimg file". Are you sure it froze and it's not just thinking?
ok ill this one if it doesnt work ima go into ustream or something
it freezes on system while unzipping i can go into ustram if you want
What SPL and Radio do you have now? Is it still S-OFF? If so, try only flashing the hboot, radio and recovery - steps 4-7. I honestly have no idea what's going wrong...
now its
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RA=DIO-3.22.20.17
JUN 2 2009,12:27:83
Well, the good thing is you still have S-OFF, so try what I said.
my phone died on the fastboot flash recovery recovery.img but got past radio but now s-on is now on
WTF? What do you mean "died"?! Are you at least back to the stock radio and SPL? Does your phone boot into recovery (hold down home and press power) or into normal mode?
If you're back to stock radio and SPL you should now be able to start the tutorial once again and it shouldn't fail on flashing sappimg this time. At least I hope so
Repost your fastboot info.
ok i got the sappimg to work phone didnt boot tho going to continue tutorial
yeeessss i finally got in recovery point me to the best rom and should update spl and radio
also thankyou
keinengel said:
Binary, could you please merge this with http://forum.xda-developers.com/showthread.php?t=744211 and http://forum.xda-developers.com/showthread.php?t=744450?
ricmiester, as far as I remember CPLD-13 is for MyTouch 3G Fender / LE, which means you flashed the wrong radio and spl. Make a goldcard and use the rooting tutorial at the unlockr (google it) to fix it.
Click to expand...
Click to collapse
You got it. I'll merge them and this is a HUGE no no!
In fact, we even have a rule against it.
5. Post a message only once.
As a large forum we don't need unnecessary clutter, You're free to edit your message as you like, so if you do not receive an answer revisit your message and see if you can describe your problem better. Not everyone is online at the same time, it might take a while before you receive an answer.
Click to expand...
Click to collapse
@ricmiester
The next time you violate rule #5 I will close and remove the thread and you will have a time out. You only need to post a topic ONCE. One topic, one thread. Simple as that. You're lucky that I'm in a good mood or all of your posts would be closed.
Now to spend the next ten minutes cleaning this up.
ricmiester said:
yeeessss i finally got in recovery point me to the best rom and should update spl and radio
also thankyou
Click to expand...
Click to collapse
Okay, great! Now you should be running your stock SPL and radio (which means S-ON), but you can go into the modded recovery by holding down home and pressing power.
If you still have the 1.33.2010 SPL and 3.22.20 radio you need to flash the stock ones, otherwise no ROM will work!
As for a ROM, I really don't know which one would be best for you, but you can check out the ROM bible at http://forum.xda-developers.com/showthread.php?t=682243 - last section of the first post is for your phone - MT3G 1.2 / LE Fender.
Glad I could help and welcome to XDA
hi guys, i have a Fender Mytouch - which was running roms nicely till i booted back into recovery then selected restart/reboot and it went straight to the HBOOT screen - i press back to go to fastboot but nothing happens, i tried all key combos to get into recovery or fastboot but nothing. Completly stuck on this HBOOT screen :-(
PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02
Oct 21 2009
please ive tried to look other posts but they all can get into fastboot i cant, can someone help i didnt flash any spl or anything but 32a/32b roms over the last month - oh and it was running recovery-RA-sapphire-v1.6.2G before this happened
Is there a way to flash a recovery image from the HBOOT screen ? I really dont know what the fook happened - grrrr crazy
please can one of the smart guys on here give me assistance - been trying to look for the solotuion for 3 hours now
zerodi said:
Is there a way to flash a recovery image from the HBOOT screen ? I really dont know what the fook happened - grrrr crazy
Click to expand...
Click to collapse
Yes, if you have an engineering SPL, which you do not. You'll need to flash a stock ROM.
do not flash an eng spl. Our phones do not run on anything other then stock radio and spl. Also, even though it is a 32a board, only g1 /32b roms and recoveries work.
What happened to you makes no sense unless your leaving something out or tried to flash an ota Rom.
Take battery out, put it back in /hold home and power, should go into recovery. If not, I would say follow my guide in Sig to start over but you'll probably screw up on flashing the radio and spl.
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
turop said:
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
Click to expand...
Click to collapse
lol Oops Didnt catch that. HEs right, you have the G1 radio going. Ours should be .12 at the end... I think lol. I havent had to mess with it for a while since Universal Androot works now. But again, you may want to start over if you know what your doing. Otherwise, time to go get a replacement because flashing the radio and spl, your probably going to brick it anyway.
crypysmoker said:
do not flash an eng spl. Our phones do not run on anything other then stock radio and spl. Also, even though it is a 32a board, only g1 /32b roms and recoveries work.
What happened to you makes no sense unless your leaving something out or tried to flash an ota Rom.
Take battery out, put it back in /hold home and power, should go into recovery. If not, I would say follow my guide in Sig to start over but you'll probably screw up on flashing the radio and spl.
Click to expand...
Click to collapse
Thanks encouraging as your words are i didnt do anything / screw anything up all i did was reboot into recovery from the sparks rom then reboot/restart and it gave me this problem !!!
turop said:
you flashed a wrong radio, man
"PVT 32A SHIP S-ON G
HBOOT - 1.33.0013
CPLD-13
RADIO - 2.22.23.02"
2.22.23.02 is the radio for google branded, my touch 3g = PVT 32B .... not your 32A
Click to expand...
Click to collapse
Umm..what?
Your radio/SPL are fine. As for your situation, did you root using the goldcard method? If you did, try doing it over and see if it'll let you into fastboot after loading the engineering sappimg.
Sent using Tapatalk.
hey guys , i got into recovery now and wiped everything then flashed a rom but its stuck on the rom boot screen now, cannot boot into the rom
I just flashed [MT3G 1.2/LE Fender] CR_Slide2G1_v1 and it works ! My LE is back up and running
i really dont know why that happened stuck on the Hboot screen
zerodi said:
I just flashed [MT3G 1.2/LE Fender] CR_Slide2G1_v1 and it works ! My LE is back up and running
i really dont know why that happened stuck on the Hboot screen
Click to expand...
Click to collapse
Some roms take 10-15 min to boot up so you just gota have patience .
Also, any roms built with a Cyan kernel after 5.0.8 will work on our phones also.
IS the location working on that rom for you?
When it first cam eout I used it for months with no problems.. but then I tried to go back a few days ago and the weather/clock will not find me.
yeah with wifi it picks up my location for the weather just fine
zerodi said:
yeah with wifi it picks up my location for the weather just fine
Click to expand...
Click to collapse
only on wifi? thats weird. That would explain why it keeps asking for wifi to be on though lol.
You wont belive it but this f***in ohone has just gone and done the same problem again.....
I was charging it then powered off the device then turned it on after 30mins and its now stuck on the HBOOT screen AGAIN - grrrrrr i cant belive this thing
So now im completey stuck again - if this happens everything i charge this thing then thats not gonna be cool.
Im trying this method here http://forum.xda-developers.com/showthread.php?t=734617 , posted by DonJuan692006
but because the phone cant boot up into the OS adb doesnt see it as list of devices so i cant do the goldcard and start again.....
hmmmm i might throw this thing outta the window
Without a goldcard your not going to be able to go that route. If you've still got your Hero, you can use it to make the goldcard, or any Android powered device for that matter. Maybe just wait it out and see if it just starts working as before?
i have a successful goldcard.img from my Hero will take be ok to use for the Fender you thinks ?
damm-it just tried that and SAPPIMG gives an Incorrect Model ID - because im using the Hero goldcard
damm i dont know what else to try
does anyone have a Fender Goldcard img they would like to share with me - proberly wont work but you never know i might get lucky
cheers
Hey guys really sorry if this has been posted over a hundred times or whatever but I really need help. I was trying to do a favor for my friend and flash his phone with a custom recovery and maybe a new rom and I ended up using Radio Switcher because it had a perfected SPL and from there I ended up here
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010
RADIO-6.35.16.19
Jun 2 2009, 17:27:03
Cant get into recovery or regular system and I tried the SAPPIMG.zip method but all I have is Sandisk cards and the phone refuses to find the image from any of them. I have been a member on this site for a while now all the way back to the HTC Wizard and currently have a HTC Aria and love it and love how easy to hack it is compared to this phone. Just really need help cause I have to return this phone to my friend Monday. I know I know...shouldnt have played around with it if you werent sure what you were doing lol Any and all help would be overly appreciated. Thanks guys.
Ok I ended up getting the phone unrooted and now I have this
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-6.35.16.19
Oct 21 2009,22:33:27
I got the SAPPIMG.zip method working but now Im stuck here
Parsing...[SD ZIP]
(1) BOOTLOADER - OK
(2) RADIO_V2 - Updating
and the red status bar just stays stuck at about 98%
Im giving up on the hacking part I just want to get this phone back to stock and give my friend his phone back
Forgot to tell you guys this is a mytouch with the 3.5 headphone jack
ired44 said:
Hey guys really sorry if this has been posted over a hundred times or whatever but I really need help. I was trying to do a favor for my friend and flash his phone with a custom recovery and maybe a new rom and I ended up using Radio Switcher because it had a perfected SPL and from there I ended up here
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010
RADIO-6.35.16.19
Jun 2 2009, 17:27:03
Cant get into recovery or regular system and I tried the SAPPIMG.zip method but all I have is Sandisk cards and the phone refuses to find the image from any of them. I have been a member on this site for a while now all the way back to the HTC Wizard and currently have a HTC Aria and love it and love how easy to hack it is compared to this phone. Just really need help cause I have to return this phone to my friend Monday. I know I know...shouldnt have played around with it if you werent sure what you were doing lol Any and all help would be overly appreciated. Thanks guys.
Click to expand...
Click to collapse
You have S-Off so just lookup on how to use fastboot commands to flash the needed radio, recovery and spl.
I really hope that this isn't a US T-Mobile device.
ired44 said:
Hey guys really sorry if this has been posted over a hundred times or whatever but I really need help. I was trying to do a favor for my friend and flash his phone with a custom recovery and maybe a new rom and I ended up using Radio Switcher because it had a perfected SPL and from there I ended up here
SAPPHIRE UNKNOWN 32A ENG S-OFF H
HBOOT-1.33.2010
RADIO-6.35.16.19
Jun 2 2009, 17:27:03
Cant get into recovery or regular system and I tried the SAPPIMG.zip method but all I have is Sandisk cards and the phone refuses to find the image from any of them. I have been a member on this site for a while now all the way back to the HTC Wizard and currently have a HTC Aria and love it and love how easy to hack it is compared to this phone. Just really need help cause I have to return this phone to my friend Monday. I know I know...shouldnt have played around with it if you werent sure what you were doing lol Any and all help would be overly appreciated. Thanks guys.
Ok I ended up getting the phone unrooted and now I have this
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-6.35.16.19
Oct 21 2009,22:33:27
I got the SAPPIMG.zip method working but now Im stuck here
Parsing...[SD ZIP]
(1) BOOTLOADER - OK
(2) RADIO_V2 - Updating
and the red status bar just stays stuck at about 98%
Im giving up on the hacking part I just want to get this phone back to stock and give my friend his phone back
Forgot to tell you guys this is a mytouch with the 3.5 headphone jack
Click to expand...
Click to collapse
First combo, we could have helped you out...
But the second combo... ooohhh... bad one...
Perfected spl and wrong radio/spl combo... NOT GOOD!
Try to flash the sappimg.zip that gave you the first spl version (1.33.2010).
If you get that back, then we can work out the rest pretty easy!
ired44 said:
Ok I ended up getting the phone unrooted and now I have this
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT-1.33.0013 (SAPP31000)
CPLD-13
RADIO-6.35.16.19
Oct 21 2009,22:33:27
I got the SAPPIMG.zip method working but now Im stuck here
Parsing...[SD ZIP]
(1) BOOTLOADER - OK
(2) RADIO_V2 - Updating
and the red status bar just stays stuck at about 98%
Im giving up on the hacking part I just want to get this phone back to stock and give my friend his phone back
Forgot to tell you guys this is a mytouch with the 3.5 headphone jack
Click to expand...
Click to collapse
Are you trying to intentionally brick your friends phone?
[RANT]
I'm guessing that you didn't do much reading before actually messing with his phone did you?
MyTouch 1.2 (aka Fender, aka LE) w/3.5mm headphone jack
Ultimate Guide: How to root myTouch 1.2/LE Fender (3.5mm jack)
Look, I'm not trying to give anyone a hard time but this is exactly what I was talking about a few days ago.
There is so much confusion over this device! It's not hard! Anyone that thinks that is is should have been around when the device first came out! DAMN THAT WAS ROUGH! But it was a learning experience. And through that learning experience we made apps (Androot) and guides and stickies JUST FOR THIS! Yet... how does this keep happening??? Someone explain it to me... please. I'm desperate to know.
[/RANT]
With that said... you are going to have to use a goldcard now that you have S-ON, still not rooted, no custom recovery, etc. You won't be able to boot the phone up because you are DEFINITLY using the wrong radio. You'll be lucky if you didn't completely brick it already.
Use the links above to create a goldcard. I'll warn you that this can be a pain in the butt ( not to mention that some sdcards are notorious for not working at all for this method!) because it requires getting ANOTHER android phone, putting the sdcard in to get the serial number of the sdcard (unless someone knows another way to get it), entering the code into a website to get the goldcard image e-mailed to you then using a hex editor to copy the bootsectors of that goldcard image enter the code into the hardware of the sdcard via card reader so you can use the freshly made goldcard, then all that's left is dowloading the right sappimg.zip file, placing it on the root of the sdcard and booting into the bootloader. You would flash the goldcard image At that point you will be have the Engineering (S-OFF) SPL again and the CORRECT radio. Once that is done you only need to fastboot flash recovery recovery.img (G type, not H)
Then flash the stock SPL back.
Then you will be free to flash a 32B type rom through recovery.
After you have done ALL OF THAT! Your friend might spare your life.
Here... try something like this. Maybe you can find someone to help.
http://hartford.craigslist.org/search/mob?query=root&srchType=A&minAsk=&maxAsk=
I think you're Hartford area... if not then just adjust if necessary.
Long time since I have been on this forum. Anyway, got a friends 32B mytouch that I have been meessing around with. Had the ginger yoshi rom running for a few days.
I went to update radio and spl today and definately screwed that up. I have no recovery, and can only get into the bootloader screen.
Heres my stuff:
saph PVT 32A Ship S-ON H
Hboot 1.33.0009
cpld-10
radio-6.35.16.19
It is a 32B but now shows 32A. I have tried a couple of the fastboot tools and have not suceeded to flash any other radio, SPL, or any recovery. I have tried flashing the SAPPIMP.NBH OG way of rooting and it never passes the RADIO update.
Thanks
Someone please let me know if they have any advise.
try not to flash the sapping in fastboot and try it from a goldcard in h boot
To make a gold card i understand you need your CID #. How do i get that if my phone wont boot. Can this be done via fastboot?
kntdookoo said:
To make a gold card i understand you need your CID #. How do i get that if my phone wont boot. Can this be done via fastboot?
Click to expand...
Click to collapse
No, but you can do it from any Android powered phone. However, I'm not sure flashing a sappimg is exactly going to work. This is more mumilover's area, so hopefully he'll check in and can add his thoughts.
Thanks DonJuan. Yea, i have a post into Mumilover. Hopefully he can help.
I'm thinking the fix is going to be somewhere around flashing an engineering SPL and then flashing the correct SPL/radio combo, but even that's going to require a goldcard.
Yeap... goldcard is essential :0)
Any android phone can make it...