So, ive read post after post on performing this task and it is still beyond my capabilities. My wallaby is running ppc2002, rom version is 3.20.06, radio version 4.21.01 protocol version 32s54. It's running bootloader 6.22, i havent got active sync, xdatools wont run due to missing dll's or some such thing. Have a 1gig sd and a 512mb mmc,,,,
How can i upgrade with this setup? visited rom kitchen (awesome site) and cooked up a rom, extracted NK.nbf,
Need help! Surely i can upgrade with this equipment,
http://www.romkitchen.de/ make an exe then
Rudegar said:
http://www.romkitchen.de/ make an exe then
Click to expand...
Click to collapse
So is the exe executable from an sd card?
no the exe is only for activesync upgrades
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
how to flash using sd
if the tool is missing dll's then type in the name of the dll in google and find a place to get the dll and it will work
Rudegar said:
no the exe is only for activesync upgrades
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
how to flash using sd
if the tool is missing dll's then type in the name of the dll in google and find a place to get the dll and it will work
Click to expand...
Click to collapse
Right, well got active sync which meens the dll's i needed are in system 32 or whatever. But,,, Does bootloader 6.22 cause problems?? Thanks for all the help,, sure this fone is a bit old but who cares. Massive screen, runs office, windows media, touch screen, great fone
Any suggestions? I cant be the only one without a data cable or cradle. At the end of the day i want the fone to run best as possible. I am thinking there is alot more compatable software for wm2003 then ppc2002? @ the moment im running mame and pacman,,,,,,,, Speaking of software, is the media player in 2002 meant to be slow? As far as video go's ive given up there.
what is your problem?
Problem is i dont seem to be able to downgrade from bootloader 6.22 to 5.15 so i can update the rom to 2003. doing ll this without a data cable or cradle.
Bootloader should not cause any problems.
Missing Dll´s for XDATools came as you have ssen correctly form ActiveSync. So you need to install this programm on your PC to use XDATools. Afterwards you will be able to wirte the ROM on your SD-Card and then flash the new ROM on your device.
So if you don´t have any cradle or cable, and don´t sync with ActiveSync, how did you manage your conacts,install software, exchange files, ....?
Stefan
I see the confusion
I have card reader's on the front panel of my pc. So i am using xardit to transfer the bootloader images onto either an sd or an MMC card. So i transfer the patch with the NB2 extension on to the card. Cold reboot xda and it gets to the normal screen telling me i need the keycard.
I can use either xdarit or isoimagetool to transfer the .NB1 file on to an SD.
I have no data cable, so these are the only methods i can use. Just pc with multi card card, sd car, mmc card.
LumpiStefan, the rom kitchen is a damn fine peice of work!
when i had a wallaby i only ever flashed it using a sdcard reader
was pretty easy used ositool put the nbf / nb1 on the sdcard
after which the cardreader could no longer read the sdcard(that mean it's successfully planted)
then i put in the sdcard and entered the bootloader and it autostart upgrading
and when it's don i hardreset and thats it
Hi And thanks
I have tried this with a 1g toshiba sd and a 512 sandisk mmc, neither seem to auto start an update. I have browsed the web a bit and have found different theories on bootloader being a problem. My card reader is a panel on the front of my pc, or using my ngage. tried formatting fat16 or fat32. Im sure it's currently ppc2002 as this is the first screen after the o2 water screen
I think your problems come from your card reader. Many people have reported, that the internal card reader causes problems in writing the ROMs in correct way on the cards. I would s uggest to use an external card reader/writer.....
Stefan
and those are only 10£$€'ish
Thanks guys for your help, all up and running now. I appreciate the advise. Rudegar, my problem was getting the wrong info from elsewhere, the solution was the card reader, Cost me $9.00 au to buy one. I thank you both
Hello I have an HTC tytn (hermes200) and its on sweedish lang I would like it to instal a new rom to bo on english. I instaled SIM and CID unlocker and it works fine. But when I trie to instal a rom like CRC r13.5 it disconects my phone from the computer, I use an USB conection via ActiveSync. That conection works fine when I transfer files or something else and the only time it disconects is when I trie to instal the new ROM, please help I tried everything and btw I dont have a SD card my curent OS is Win 6.0 Pro but I dont understand a word of the lang heh, but the phone is so cool and I just cant give it away.
Please help guys..... Sorry for my english...!!!
btw I instaled Hard SPL v7 and SIM and CID unloacker without any problems, the only problem is instaling the ROM...!!!
re-installHard SPL V3 if you installed before the sim/cid unlocker.
Use the sd card method to install a new rom... Just make sure you have a 2Gb sd card or less and its formatted FAT32(they are default FAT).
copy the .nbh file of the rom you want on to it and rename to hermimg.nbh. insert into hermes, reset into bootloader(tri-colour screen) and follow the prompts. If you did it right then you now have a new os on your Hermes.
Depending on the os on your pc it could be a few different things...
If you're using XP then upgrade the .net framework to 3.5.
Vista and 7 I can't say...
Ok thx I will trie to flash from the SD card I hope it works...
This may help..
http://forum.xda-developers.com/showthread.php?t=640485
ive reflashed a freinds uk t-mobile compact 3 to wm6.1 but it will not see any sd cards at all ive tried botht he htc sd enhancement and the artimis HCSD cab. if i hard reset then it will not see any sd cards at all im begining to think the sd card reader my be stuffed has anyone got any ideas i as im stumped
...
theres the possibilty of its the rom you flashed with.. (MAYBE)
i faced the same problem when i flashed to a rom the other day (im a flashing junkie) and no hdsd card was in file explorer.. when it should of been, i even tried installing all the hdsd cabs i could get my hands on, yet still nothing..
i flashed to a differant rom an without installing any cab.. it was there in file explorer..
soo.. try a differant rom..
remember to ''uspl-1.11.cmon'' first.. if you havnt already..
but if you dont have ''spl - 1.11.cmon'' at your device startup (red writing when you swith it on) --- ill STRONGLY suggest you do that first mate
uspl-cmon
http://forum.xda-developers.com/showthread.php?t=311403
try this rom..
andrew's wm6.1rom
http://forum.xda-developers.com/showthread.php?t=576349
Thanks will try that the device is a locked t mob uk will try that later in the week
looks like its a dead device think ill have to open it up the check out if anything has broken inside
thanks for the advice
...
put Sd card into a card reader, in pc.. then format to fat32/fat..
maybe it will work now?
Hello guys,
got myself a BIG problem!!
I had installed a Nand version of android and it all worked fine but there was an update of the version so i thougt lets reinstal it all back to normal (WM 6.5) but the PC didnt recognized my phone the US doesnt work anymore
so i thougt it was a app i installed true Magldr 1.11 and tried to find it and delete it but unforuntly i had deleted all my setting and also the nand Android version!!!
when i tried to enter the 3 collerd screen it all runs op good and when i connent my USB it wil jam and keeps saying Serial and there will not get any text of USB
and when i do the Magldr screen and want to connect to SD card also the phone Jams and i need to disconnect the Battery and restart the phone and i can do the same things again......
Anyone got a suggestion to get my phone back up running!!
PS its about the HTC HD2 and i got the latest Radio and HSPL!!
Greating DragonRX
DragonRX said:
Hello guys,
got myself a BIG problem!!
I had installed a Nand version of android and it all worked fine but there was an update of the version so i thougt lets reinstal it all back to normal (WM 6.5) but the PC didnt recognized my phone the US doesnt work anymore
so i thougt it was a app i installed true Magldr 1.11 and tried to find it and delete it but unforuntly i had deleted all my setting and also the nand Android version!!!
when i tried to enter the 3 collerd screen it all runs op good and when i connent my USB it wil jam and keeps saying Serial and there will not get any text of USB
and when i do the Magldr screen and want to connect to SD card also the phone Jams and i need to disconnect the Battery and restart the phone and i can do the same things again......
Anyone got a suggestion to get my phone back up running!!
PS its about the HTC HD2 and i got the latest Radio and HSPL!!
Greating DragonRX
Click to expand...
Click to collapse
Boot into bootloader and then get the .nbh file from the wm rom you want to flash and copy that to the root of your sd card (formatted FAT32) and flash via sd card.
ClydeB1 said:
Boot into bootloader and then get the .nbh file from the wm rom you want to flash and copy that to the root of your sd card (formatted FAT32) and flash via sd card.
Click to expand...
Click to collapse
Thanks for the fast reply on my post,
butt what if i want to reinstal it back to te stock WM 6.5 do i need to put the RUU_Leo on my sd card??
and what did u mean with the bootloader the 3 collerd screen or the home screan of Magldr??
Just do the following:
Download a WM 6.5 ROM
Extract the .NBH file from the ROM to your SD card. (If you have to remove SD card and put into computer to be able to access it then do that)
Rename .NBH file on SD card "leoimg.nbh"
Turn phone off
Hold vol down button while pressing power button to enter bootloader
Phone should recognize the leoimg.nbh file on SD card and flash it to your phone
DragonRX said:
Thanks for the fast reply on my post,
butt what if i want to reinstal it back to te stock WM 6.5 do i need to put the RUU_Leo on my sd card??
and what did u mean with the bootloader the 3 collerd screen or the home screan of Magldr??
Click to expand...
Click to collapse
Get the stock ROM that you want to flash back to and you can unzip it with something like winrar or 7zip (it's a self extracting zip file really). The just rename the .nbh file to leoimg.nbh and put it in the root of your SD card. Start the phone in bootloader (tri-colour screen) and it should automatically flash the ROM for you.
Hope this helps - good luck mate.
Edit: Or what Digital Outcast posted while I was typing
thanks guys for the fast reply's will try it out as soon as i'm gettig @home
i'm @work so dont got a usb flasher over here (A)
again thanks and I hope this works!!!
Good luck
Thanks guys my phone is working again(Y)
but still no USB
so ony of u guys got a idee what happend to the USB connection??
Or anybody else
Your usb port is prolly busted meaning you have to get your motherboard fixed sadly.
try a different cable and usb port to start with rather than assume the usb is broke onthe phone
Hey Guys,
I bought a HTC HD2 today. It got Android on it but it bugged a lot. So i looked up a method to get
back the normal Windows Mobile. I found something in the internet.
It told me there to formate the SD-card FAT32 and then load a rom from HTC.com.
Then rename RUU_signed.nbh to LEOIMG.nbh. Then copy the LEOIMG to the formated SD Card.
So everything worked fine. I started the HTC with Vol- + Power button and it tried to install. But then
it failed to install and now nothing works anymore.
I dont even see the memory in windows when i connect the htc to my computer. I just cant do anything and
cant install ActiveSync or smth too.
Would be nice if you know what to do.
check out the links below, they might help