Hi,
i was on villainrom 5.4 and i never had any issues. yesterday i was updating google maps and then put my phone on screen lock and put it in my pocket. it was on around 11 % battery on that time... when i got it uot of my pocket again it showed me the hero logo which shows on start up... i let it stay there for a couple of minutes...nothing happened...
took the battery out and rebooted...same thing...
tried to go into recovery mode but all it shows me is: Build: CyanogenMod v1.4 + JF...nothing else, when i press home and (button to) turn it off the text on the bottom dissappears, when i press it again it comes back...thats all that works...
what can i do? i didnt brick it didnt i? cause it just crashed on normal use...
ok fixed it myself... i dont know what was wrong but i found the button combo HOME + BACK + TURN ON which resets the phone and it worked...
Related
Water got on my phone. Imediately turned it off. After a few days of drying out it turned on and booted up fine, but I powered it off just to be safe. Few days later wouldn't get past verizon logo. Any ideas?
how old is the phone? Does it carry any warranty at all?
I would try the C+B+ Power boot combination to try your luck if you dont care about losing the phone content.
Doesnt alter the OS nor image, so its just a cleaning.
May not improve your status if it's bricked, but it's faster than exchange for other (about 1 min).
The c b button combination shows me an image then flashes to the verizon logo where it is stuck
Pull out battery, hold power button for 20-30 secs.
Then try to boot.
If that doesnt work, try booting up holding "Backspace" "Enter" & "Search"
Did you ever get this working? I'm curious if it's still having problems, can you take it in to the Verizon store, or call their support, to walk you through getting it up and running?
The backspace, enter search combo worked! I am unable to get the wifi working though. Whenever I go to the wireless settings tab it just takes me back to the main screen. Any ideas?
Well that was short lived. Power cycled the phone a few times and having the same issue... Everything was working when it was on except the wifi...
nlbailey said:
The backspace, enter search combo worked! I am unable to get the wifi working though. Whenever I go to the wireless settings tab it just takes me back to the main screen. Any ideas?
Click to expand...
Click to collapse
Your welcome, no problem.
So your wifi isn't working eh? hmm...Take out your battery and clean the contacts with a rubber eraser. (on the ones on the phone itself) Then, put the battery back in and hold r + b then boot up the phone.
This will restore all user settings.
After you have done that, go to phone settings and click Erase Phone Data.
I know you have done that with the step explained above, but this will get it to work properly
Would not let me edit (not double post)
nlbailey said:
The backspace, enter search combo worked! I am unable to get the wifi working though. Whenever I go to the wireless settings tab it just takes me back to the main screen. Any ideas?
Click to expand...
Click to collapse
Your welcome, no problem.
So your wifi isn't working eh? hmm...Take out your battery and clean the contacts with a rubber eraser. (on the ones on the phone itself) Then, put the battery back in and hold r + b then boot up the phone.
This will restore all user settings. ( i know this goes to the original kin mode but thats the point, but if your phone is incapable, then it will just erase your phone. After you have done the r+b combo, do it again then do the step below)
After you have done that, go to phone settings and click Erase Phone Data.
I know you have done that with the step explained above, but this will get it to work properly
The phone is on right now, but i am scared to turn it off again. Since I am at work right now I will do the r+b combo when I get home in case it wont turn back on. Also what exactly is it that the backspace, enter, combo does?
nlbailey said:
The phone is on right now, but i am scared to turn it off again. Since I am at work right now I will do the r+b combo when I get home in case it wont turn back on. Also what exactly is it that the backspace, enter, combo does?
Click to expand...
Click to collapse
The combination "gives more power" the the battery I suppose. I'm guessing it makes the phone turn on when it crashed. I used to know what it was for. I'll try to remember. It's going to be hard since no one else knew the combo. (well at least I think).
Good thing I didn't post this yet because I remember now. It's basically a "hidden" way to turn on the phone if it crashes with the "key". Key meaning the power button. I do not know the exact name for it.
So as the title says i currently have MIUI 1.6.10 demonSPEED v1.1 ROM and it is not booting, just completely unresponsive to everything i could think of. Im just throwing this out there to see if this has happened to anyone before or if there is a way of fixing this issue. I don't believe it has anything to do with thederekjay's rom just some unfortunate event. Anyway i fear it is possibly bricked and that i am gonna have to shell out the $150 to get a new mt4g from the insurance. Details follow...
So have had this rom for about a week now and has been working great. However this morning i was on the browser reading the news and it became unresponsive. After i let its display turn off (i just left it alone) i used the track pad to wake it. It was slow but it did show me the lock screen. When i attempted to unlock with a swipe down i felt the vibrations but the slide lock didn't budge. I then tapped the power button to turn the display off and tapped the power button once again to turn it on but nothing, just stayed black. I tried a soft reset by removing the battery, placing it back in, and powering back up. When i did so the t-mobile mytouch 4g boot image w/ the white background came on then went to an android image (lighting up a through d, looping) but then it just remained at the android image for five minutes! So i tried a soft reset again but the same thing would happen, act like it was gonna boot up completely but then gets stuck at the android image. So then i tried removing the battery and booting into recovery (via power, vol down, trackpad) that time the t-mobile mytouch 4g image would appear but after that the screen went black and after that every attempt with either the soft reset or boot into recovery wouldn't do anything at all, just a black screen as if the battery wasn't in at all. Its been like that all day and i can't figure it out so if anyone knows some info i would greatly appreciate it thanx
whatsup.. big problem on my hands and iv'e Looked everywhere on here as much as i can to Find a solution to my problem.. witch brings me to here. -
Problem: My transformer TF101 was working and and fully functional Just a Couple of days ago,until it Froze up then Died while i was using it.. (note: it IS rooted and has a custom rom on it as well) .. so,i started it back up by just pressing on the power Button ,aaannndd it just got as far as the asus "inspiring innovation" welcoming screen.. and it stay there and goes no where else..
Iv'e tried different solutions like pressing power and holding volume up or volume down to get into recovery.. but all it does is Shut off,i TRIED (though i don't think i did it correctly) to do the NVflash (mine is compatible) but my PC will not Recodnize my Transformer's USB.. iv'e downloaded the USB utility as well and still nothing..
Can someone tell me what to do or at least help me out to get this sucker fixed.. its depressing not using my tablet lol. .. any help is awesome,thanks -
To get into recovery it's:
Push and hold Vol down plus power button
When you see words at top left corner
Immediately push Vol up within 5 sec
Try that and see if you can get into recovery
awesome man,its so retarted i forgot that lol.. but i have run into another Problem unfortunately.. i did exactly what you said and it froze i believe at the "booting recovery kernal image" screen :/
any suggestions ? or should i just turn it off again and Redo it?.
Is your tf nvflash compatible? (serial # B60 or previous and some B70).
Yupyup, I got a B40 -
Sent from between my butt cheeks
I have the strangest damn problem on my phone. Sometimes, when I press the power button to turn the screen off, the phone just shuts down completely and then when I try to reboot won't get past my splash screen. When this first happened I couldn't get the phone restarted at all, even by taking the battery out and waiting for over 10 minutes. Everytime I tried booting it would go to the splash screen and then blank back off. It would do this once and then I had to remove and replace the battery just to get it to boot to the splash screen again. I thought this might have something to do with having a custom rom installed (sacs custom), so I played around with the phone and managed to get it in Odin mode. I then brought the phone back to stock. Everything worked so I figured I had fixed it, but then after pressing the power button one time I got back the same problem. It shutdown and would not restart past the splash screen. In retrospect, I think when I pressed the power button the screen did not immediately go off and so I clicked it a couple times in a row before it crashed, that may be what triggers it, b/c sometimes i press the power/screen button and it goes off without incident.
So, now I had the phone back to stock and had the same problem. It turned off and would not boot past the splash screen. By a stroke of good fortune I figured out how to get the phone booting again past the splash screen. When the splash screen came up, I started repeatedly touching and swiping at the phone; drawing little circles tapping at it, etc... When I did this the phone continued to load and boot up normally.
I installed AVG antivirus, to see if maybe there was malware on my phone. Scans showed nothing. I updated all of the software as well. I now have an app installed for turning off the phone instead of using the power button. This of course is not an ideal situtation, why should pressing the power button crash my phone like this??
Hello everyone,
I have an S3 neo, it's 6 months old. About 2 months ago i started checking in this forums, and then i flashed cm12, and started adding custom roms to my phone. Everything was well, phone was working fine, and so on.
One morning i woke up and my phone went off, and when i turn it on, it's black screen. I restarted few times, took out memory card, and poof it worked. Was all good.
I left it like that and next morning it happened again. And since then i tried all the ways, like take out battery, hold power button 1 min then try to turn it on after few minutes, and so on. Nothing worked. Pulling out memmory card or sim card didn't work either. It's like this for almost 2 weeks i can't use the phone.
I cant get in download mode or custom recovery i i don't know why it won't react on that. It turns on each time like normally, led notifiaction works, the lights on home and back button works, only screen is black. I can unlock it, and such things but cant see anything.
I even succesfully did a factory reset over play store from pc, but that didn't help either..
Biggest problem is that its under warranty but since custom rom i can't take it to service unless i have money to pay... which i dont
I have NEVER DROPPED it, it was never in water, and so on. Doesn't have a scratch at all.
It even has sound, and everything. Just freaking black screen ....
So what i am asking is if anyone here knows how to remove custom rom and custom recovery over pc,is it possible, without the screen? Any way to do it so i can get warranty back ? All i need is a freaking stock rom and stock recovery and a binary reset i guess. Just freaking would need screen to work for 5 mins eh....
If anyone has any ideas please post them, thanks..
Crazeh said:
Hello everyone,
I have an S3 neo, it's 6 months old. About 2 months ago i started checking in this forums, and then i flashed cm12, and started adding custom roms to my phone. Everything was well, phone was working fine, and so on.
One morning i woke up and my phone went off, and when i turn it on, it's black screen. I restarted few times, took out memory card, and poof it worked. Was all good.
I left it like that and next morning it happened again. And since then i tried all the ways, like take out battery, hold power button 1 min then try to turn it on after few minutes, and so on. Nothing worked. Pulling out memmory card or sim card didn't work either. It's like this for almost 2 weeks i can't use the phone.
I cant get in download mode or custom recovery i i don't know why it won't react on that. It turns on each time like normally, led notifiaction works, the lights on home and back button works, only screen is black. I can unlock it, and such things but cant see anything.
I even succesfully did a factory reset over play store from pc, but that didn't help either..
Biggest problem is that its under warranty but since custom rom i can't take it to service unless i have money to pay... which i dont
I have NEVER DROPPED it, it was never in water, and so on. Doesn't have a scratch at all.
It even has sound, and everything. Just freaking black screen ....
So what i am asking is if anyone here knows how to remove custom rom and custom recovery over pc,is it possible, without the screen? Any way to do it so i can get warranty back ? All i need is a freaking stock rom and stock recovery and a binary reset i guess. Just freaking would need screen to work for 5 mins eh....
If anyone has any ideas please post them, thanks..
Click to expand...
Click to collapse
I think you can boot to download mode or revovery. The LED notifi and backlight buttons won't turn on if you boot to download mode or recovery.
Just try to boot to...
1. download mode. Just press and hold for 2-3 seconds power + home + volume down
2. then wait 3 seconds. After that press volume up.
3. Connect your phone to pc, open odin and check if a device is connected.
4. If a device was found by odin - flash a ROM (stock or something else) and hope that this will fix the black screen problem.
Good luck!!
Hi, thanks for ur reply but... My phone turns on when i click home + volume down + power button. I hear sound, blue led notification and so on.......
But when turned on, when i connect to usb odin recognizes it, says connected, and when i try to install the rom i it takes really long and on the end i get fail..*attached the screenshot of fail) I guess because its not in download mode. Any other suggestions how i could get in download mode more?
More suggestions please?thanks
Anyone has any ideas ?
So what all i tried is
Remove battery, hold power button for 1-2 mins, let phone for few mins and turn it on. didn't work
I tried with adb,but usb debugging not on so cmd cant find my device
Only thing left i guess if someone has idea how to get in download mode in some other way or some program that doesnt reguire download mode but can flash rom and etc.
@Crazeh
Take it back to the nearest service center and act the dumb ("I don't know what is wrong with it")
I have done that many times
They are prob gonna call me and tell me to pay for fix
No one has any idea what else should i try ?
try link2sd app form play store. it has the option to boot to download mode. I think titanium backup has the feature also.
My screen is black so i can't do anything on it.....
try to disable ambient screen. report if problem persist
How should i disable ambient screen ? While i can't see anything on phone cause of black screen ?thanks for reply Rox
Anyone?
Crazeh said:
Anyone?
Click to expand...
Click to collapse
ok so i think your problem isn't due to any rom but hardware problem
power off your phone remove the back , look on the left you see a little trap , open it , now you see connector it is the one of the screen try to see if you can disconnect and reconnect it
power on your phone and see if it work :fingers-crossed:
Where is that little trap?
btw if i do this will i loose my warranty completely ?
Crazeh said:
Hi, thanks for ur reply but... My phone turns on when i click home + volume down + power button. I hear sound, blue led notification and so on.......
But when turned on, when i connect to usb odin recognizes it, says connected, and when i try to install the rom i it takes really long and on the end i get fail..*attached the screenshot of fail) I guess because its not in download mode. Any other suggestions how i could get in download mode more?
More suggestions please?thanks
Click to expand...
Click to collapse
If Odin recognizes it, it means it's in Download mode. The device has different interaction with the host over USB when it's not in Download mode.
I don't see the screenshot of the failure. It may be that something got broken in your hardware, so the flashing fails. There's a known issue with the S3 called "Sudden death syndrome", I don't know if it applies also to the S3 Neo, where some of the memory of the ROM fails suddenly. If that is the case (I'm not saying it is, but it might be), there's no fix other than replacing the hardware.
Odin doesnt go over setup connection. cant post screenshot bc im new to the site. btw im sure the phone is on but recognized in odin...