Database Users

Wing locking itself

I swear I did not change any settings, but starting yesterday my Wing would just lock itself when the screen shuts off. Anyone know how to disable this? Thanks
*edit*
another odd thing I noticed - I don't have to unlock when the phone's charging. very weird.

what programs are you using? If you hold down the end key for a second, the phone will lock. Maybe you are accidentally bumping it when you put it in your pocket or case.

Sorry I wasn't more specific... I'm running ttran's OpenTouch 3.0. when I turn on the screen (using the power button) I need to press unlock twice to get to the main menu. It's annoying and I'd like to get rid of it. idk... I didn't change anything and it just randomly started happening yesterday. help?

I agree with you PharmacySchool...I'm running Ttran's 3.0 ROM myself and the "locked" feature pop-up on me this afternoon, out of the blue. It is very annoying and I'm not sure what caused it to start happening. Was getting an address out of the contacts list, X'ed out of contacts once finished, clicked the power button to turn the screen off...next time I went to use the phone, it magically was locked and has been since. A real pain to have to hit the unlock button twice just to use the phone. Have played around a little with it, but no success on correcting the problem yet.

Make sure you're not overclocking the phone. This can cause lock ups if the CPU overheats or if it doesn't get the required voltage or for other reasons.

The lock I'm referring to and I believe PharmacySchool...is like a "key lock". How some phones have an option to lock the keys so it can't accidentally call someone if numbers get pressed by mistake or while in your pants pockets. Nothing to do with the CPU or it being overheated. All you have to do is press the button to turn the screen light off and instantly turn it back on...it's locked. You have to hit the "unlock" button on the bottom left hand corner and the tap the unlock button on the screen. After doing such...you can once again use your phone.

I have the answer!!!
pharmacyschool said:
I swear I did not change any settings, but starting yesterday my Wing would just lock itself when the screen shuts off. Anyone know how to disable this? Thanks
*edit*
another odd thing I noticed - I don't have to unlock when the phone's charging. very weird.
Click to expand...
Click to collapse
I'm pretty knew at this but I ran into the same problem and I figured out how to fix it. I don't know all the fancy wording so bare w/me. On your main screen touch and hold your battery symbol/ 6th option down says DeviceLock with a green check/ uncheck that **** and your good to go.
NOW someone PLEASEEEEE create a slide 2 "answer" not a slide 2 lock. I am so tired of my phone answering its self in my pocket when I don't want it to.

A_C 's S2U2 has a slide to answer feature..... You should check it out.

nextpimp said:
A_C 's S2U2 has a slide to answer feature..... You should check it out.
Click to expand...
Click to collapse
I've installed S2U2-0.2-WM5 with Touch It v2.3 and had problems. I think I remember it having a slide to answer but I also remember it answering with the green button as well. Maybe there was a way to disable it but I don't know how.
Does it work better Open Touch v3.0. because thats what I'm running now.

WOW... thats an OLD version.... that version should not have the slide to answer.....Current Version is 0.99p. It can be found in the development and hacking forum. You'll need to enable the S2A feature with the settings program...Man the apps come a LONG way since your version...We got animated gif support, Random still backgrounds, an exceptions list so voice dialers will work properly and internet browsers will stay alive... Just try the new version.

midas1200 said:
I'm pretty knew at this but I ran into the same problem and I figured out how to fix it. I don't know all the fancy wording so bare w/me. On your main screen touch and hold your battery symbol/ 6th option down says DeviceLock with a green check/ uncheck that **** and your good to go.
NOW someone PLEASEEEEE create a slide 2 "answer" not a slide 2 lock. I am so tired of my phone answering its self in my pocket when I don't want it to.
Click to expand...
Click to collapse
Midas, that fixed it. thanks a lot. I owe ya one.

nextpimp said:
WOW... thats an OLD version.... that version should not have the slide to answer.....Current Version is 0.99p. It can be found in the development and hacking forum. You'll need to enable the S2A feature with the settings program...Man the apps come a LONG way since your version...We got animated gif support, Random still backgrounds, an exceptions list so voice dialers will work properly and internet browsers will stay alive... Just try the new version.
Click to expand...
Click to collapse
NICE!!!!! Works good so far. Now I won't be divorced! LOL

[Utility] AutoLock - Automatic Screen Locking Solution

I have a Kaiser, and there's nothing more irritating than accidentally bumping a button while having the phone in your pocket, then having random things in your pocket scroll through your address book until it calls someone. Or opens up IE and finds a high-bandwidth website. When you don't have a data plan.
Things like this hurt. I've been trying to find a solution to it, and I happened to stumble upon an olllllld application on another forum. It's called AutoLock. I found it Here.
Anyways, long story short, it uses the built-in Windows Mobile screen lock and turns it on whenever the phone's screen turns on. So hitting the power button is enough to lock your phone. It's super convenient, and for the most part, it's not too buggy.
I've been using this for probably over a month now. It's a lifesaver. I had the .exe on my SD card, and every time I reflashed, I had to make a new shortcut and place it into the startup folder. So tonight, I made a CAB file out of it.
I hope you guys get as much use out of it as I do.
A quick note: It runs in the background. Terminating it will not allow it to function. The CAB will add a shortcut to the startup folder, so a soft reset will start it. Otherwise you can start it from the shortcut in the Programs folder.
Frequently Asked Questions:
Q: Is there a way to disable the program window that pops up after a soft-reset?
A: There is no way to disable the message screen on startup. Just hit the X in the top right corner, and it should minimize out of sight.
Q: When receiving a call, does the answer button and screen stay locked?
A: The answer button and the screen both unlock when the phone is ringing. If the call is answered/ignored/stops ringing, the screen will be re-locked.
Q: Will it work with my phone?
A: This program has been confirmed to work on a few models. I believe that it should work on pretty much any touchscreen device running Windows Mobile. Please, try it and tell me if it works!
Tested Phones:
Kaiser (ATT Tilt)
Touch Pro (Fuze)
Xperia

racer7 said:
I have a Kaiser, and there's nothing more irritating than accidentally bumping a button while having the phone in your pocket, then having random things in your pocket scroll through your address book until it calls someone. Or opens up IE and finds a high-bandwidth website. When you don't have a data plan.
Things like this hurt. I've been trying to find a solution to it, and I happened to stumble upon an olllllld application on another forum. It's called AutoLock. I found it Here.
Anyways, long story short, it uses the built-in Windows Mobile screen lock and turns it on whenever the phone's screen turns on. So hitting the power button is enough to lock your phone. It's super convenient, and for the most part, it's not too buggy.
I've been using this for probably over a month now. It's a lifesaver. I had the .exe on my SD card, and every time I reflashed, I had to make a new shortcut and place it into the startup folder. So tonight, I made a CAB file out of it.
I hope you guys get as much use out of it as I do.
A quick note: It runs in the background. Terminating it will not allow it to function. The CAB will add a shortcut to the startup folder, so a soft reset will start it. Otherwise you can start it from the shortcut in the Programs folder.
Click to expand...
Click to collapse
Nice one mate!
I assume you can also use this on a Touch Diamond??
neways, I will give it a shot....
Thanks for your work
Regards
Jeroen

thanks
racer7 said:
I have a Kaiser, and there's nothing more irritating than accidentally bumping a button while having the phone in your pocket, then having random things in your pocket scroll through your address book until it calls someone. Or opens up IE and finds a high-bandwidth website. When you don't have a data plan.
Things like this hurt. I've been trying to find a solution to it, and I happened to stumble upon an olllllld application on another forum. It's called AutoLock. I found it Here.
Anyways, long story short, it uses the built-in Windows Mobile screen lock and turns it on whenever the phone's screen turns on. So hitting the power button is enough to lock your phone. It's super convenient, and for the most part, it's not too buggy.
I've been using this for probably over a month now. It's a lifesaver. I had the .exe on my SD card, and every time I reflashed, I had to make a new shortcut and place it into the startup folder. So tonight, I made a CAB file out of it.
I hope you guys get as much use out of it as I do.
A quick note: It runs in the background. Terminating it will not allow it to function. The CAB will add a shortcut to the startup folder, so a soft reset will start it. Otherwise you can start it from the shortcut in the Programs folder.
Click to expand...
Click to collapse
this is a very usefull program.is there anyway to disable message screen when program start after softreset?thanks a lot in advance

It's unfortunate that I didn't create this program. I only found it through about six months of searching on the internet. Maybe a friendly XDA-Developer could write a similar program and keep it updated with new features!
As far as I know, there's no way to disable the message screen on startup. Just hit the X in the top right corner, and it should minimize out of sight.
As for if it works on a Diamond... go try it and tell me how it works!

Awesome program! Thanks

Looks interesting. Thx for sharing!

racer7 said:
It's unfortunate that I didn't create this program. I only found it through about six months of searching on the internet. Maybe a friendly XDA-Developer could write a similar program and keep it updated with new features!
As far as I know, there's no way to disable the message screen on startup. Just hit the X in the top right corner, and it should minimize out of sight.
As for if it works on a Diamond... go try it and tell me how it works!
Click to expand...
Click to collapse
yep i am just hitting x .it works in my xperia without problem.thanks again.

So what happens when a call comes? Does it lock the answer button too? And the screen?

kull said:
So what happens when a call comes? Does it lock the answer button too? And the screen?
Click to expand...
Click to collapse
Since it's the inbuilt Windows Mobile locking setup, when a call comes in, the phone is still locked, but the answer skin floats above the lock. So the screen "unlocks" so you can answer or reject the call, but it locks as soon as you answer or ignore it again.

I've discovered, using my Jade, that you can do the same thing by just setting the built-in Windows Mobile device lock to 0 minutes... You'd need to provide a password, though...
First press of the power button puts the phone to sleep... Press it again, it will ask for your password to unlock...

[REQ] Disable Touch Panel from shortcut

I have tried to make this myself but im not the best at c# I was hoping someone would like to write a small app that disables and enables the touch panel without using the gsensor or light sensor or nav sensor. i want to use this with a mort script so it would launch the app to disable touch panel then run the rest of the script then launch the app to enable it. i don't care if its two separate apps. if someone can help i would appreciate it so much. thanks

This isn't an actual shortcut, its a bit better than that if you ask me.
http://www.freewarepocketpc.net/ppc-download-sensorlock.html
Basically you just spin the phone in your hands and it will lock, watch the video, it shows what to do
I've also found an application called sleep, I used that for a while but now I'm on WinMo 6.5 and I just use the lock button instead. Just do a quick google for a program called sleep, shouldn't be too hard to find.
And also there is an inbuilt lock thingie where you can set your phone to lock the screen if you hold down the end call button for like 5 seconds but that one is a bit of a pain cause you gotta hold it for ages before it locks and then when you try to unlock it is hard especially if youre outside with the sun shining.

AdamHC said:
This isn't an actual shortcut, its a bit better than that if you ask me.
http://www.freewarepocketpc.net/ppc-download-sensorlock.html
Basically you just spin the phone in your hands and it will lock, watch the video, it shows what to do
I've also found an application called sleep, I used that for a while but now I'm on WinMo 6.5 and I just use the lock button instead. Just do a quick google for a program called sleep, shouldn't be too hard to find.
And also there is an inbuilt lock thingie where you can set your phone to lock the screen if you hold down the end call button for like 5 seconds but that one is a bit of a pain cause you gotta hold it for ages before it locks and then when you try to unlock it is hard especially if youre outside with the sun shining.
Click to expand...
Click to collapse
thanks for the response, i have used sensorlock and it is a great app but i want the screen lock so i can run script that involves buttons press while the phone is in my pocket

question about SIP default
i know this may not be the most appropriate thread to put this question on, my apologies. From the title I thought it may be. Anyhow, I installed phm registry editor and am trying to learn to use it, but not sure how to find something im wanting to change. My SIP default seems to be that anytime i open my sms inbox, or email, etc, my keyboard pops up without me selecting it to do so. I want to change it so it only pops up when I select the little tab/icon to MAKE it pop up.
Any help would be greatly appreciated. Much thanks in advance.

[Q] X2 Charging and other queries

Hi guys. I've been trying to search for this problems i've encountered on my X2 and i simply can't find any answers for it.
I have few minor problems which i want to ask.
1. My device keeps on charging even if the led image says that it's already 100%. I only assumed it is still charging because it is well written on its Status right above the led image.
Is this normal, and is there a way to fix this if ever? I'm worried that my battery gets overcharged if i wont to anything about this.
2. Sometimes my camera button fails to work. It happened several times now that when i try to activate the camera using its button on the right side the camera doesn't appear right away. Another thing, sometimes when i'm trying to take pictures and i pressed the camera button, the camera will just pause for a while and then green square boxes will appear on the screen. No image will be taken. Is that normal? or my camera is having problems?
3. I also noticed that the contacts are filtered by to view all contents (sim and device contacts) by default. I set mine to filter it to be able to just view the device contacts but whenever i open the contacts it reverts back to its default filtering which is "All Contacts". It is very useful at least for me to use the device as the contact's handler because my sim has limited memory and is divided into 2 parts. The first part is the one that appears and the other one can only be viewed if you disable the first part and make the 2nd part available by using the sim services embedded with it. So what i did was i copied all the 1st part and the 2nd part sim contents to my device and i was planning to hide them and use the phone's memory as the handler for contacts.
It was then that i realized the filtering problem. RIght now all copied contacts from my sim appears as well as the other part of the sim which is enabled. Which makes a lot of duplicated contacts (one from the device and one from the sim).
Is there away to make the phone permanently filtered in the device contacts?
4. I saw some of you guys teaching some members here to edit the phone's registry. Can i request for a 3rd party software to do that. Or can i just go directly to the mobile's registry and edit one of it (I don't know to do that by the way :-I )
5. Lastly, is there any way to activate the screen in order for me to unlock it? when the phone is locked and in stand by mode i can't seem to find any buttons to activate it. I am unable unlock the phone because the slide unlock button is not appearing.
What i'm doing to activate the slide unlock button is to press the power button or to slide the qwerty keyboard. I was hoping there are other ways to do it though just like on old phone wherein you can press the menu button and the asterisk key .
One last thing to end my post, please give me a Total Commander link too.
All replies would be very much appreciated sir/ma'am
To the moderators, please lock this thread if ever i violated rules. I just can't seem to locate any answers for my queries that's why i decided to created a thread with all my questions in it.
Thanks in advance.

its too early but ill try to answer some
1. same problem dunno if it hurts
2.never had problems with camera except sometimes failed (needed reboot) to start but i think people found out they had not enough memory - if im not mistaken
3.no clue
4.
use http://www.ghisler.com/pocketpc.htm
5.
nope the power button is ment for itit turns the screen on/off and has some other options aswell

indycar said:
its too early but ill try to answer some
1. same problem dunno if it hurts
2.never had problems with camera except sometimes failed (needed reboot) to start but i think people found out they had not enough memory - if im not mistaken
3.no clue
4.
use http://www.ghisler.com/pocketpc.htm
5.
nope the power button is ment for itit turns the screen on/off and has some other options aswell
Click to expand...
Click to collapse
Thanks for the reply.
Hmmmmm, regarding my query on the contacts filtering, i'm sure there is a registry tweak to for that. I was trying to look for it last night but i wasn't able to locate it.
Perhaps there are geniuses here that can do that for us.
Registry Editing to make the contacts filtered on "device contacts" by default. The default by the way is filtered as "All Contacts"

[Q] N4 has no Voice Dialing / Voice Assitant?

I just received my phone today.I know that there is "Voice Search" and "Google Now" built in, but I cannot seem to launch them from the lock screen using a headset.
I have also tested the headset (3 button), and it does work; I can play and stop music both locked and unlocked screen and Google Now activates when I hold middle button unlocked, but nothing happens when the phone is on lock screen.
As far as I am concerned, "Google Now" & "Voice Search" are useless unless I can activate them while they are in my pocket, for driving and walking. Furthermore, when I ask it to send a message to someone, it simply displays the message, not repeating it to me, or asking me if I would like to send. I see lots of reviews, claiming "Google Now" is far superior to S-voice and Siri (iPhone) but in my opinion, they should not be categorized together, "Google Now" simply does not do the things I need it to do. If at any point, I need to look at the screen, or press something on the screen, the whole purpose of Voice activation is rendered useless. I cannot be the only one out there with this problem. I am open to any suggestions to solve this issue, or else I must go back to iPhone for the sake of the voice dialing that is headset activated, as well as the ability to read out my messages and send them.
I have tried 3rd party apps like Headset Button, with no luck and it still does not allow Google Now to run in the background with screen off, and requires another third party app, Screen Off & Lock to do just turn off the screen with a different combination of presses on the headset. The lack of any sort of physical button on the N4 is also another problem.
I am open to any suggestions or comments if I am simply just missing something from the features. Please excuse me if I sound rude or a hater, all I am trying to do is find out the problem to my issue, and potentially inform others if they have the same needs as me.
Cheers. :good:

So because it doesn't do the things YOU need it to do, they shouldn't be categorized together?
If you want to access Now with your headset then turn off the screen lock function.

AFAIK, I don't think Google Now will do the things you want it to do out of the box. If you're willing to use third-party apps, though, I think you may be able to get the behavior you need by using Tasker (https://play.google.com/store/apps/details?id=net.dinglisch.android.taskerm). A quick search also turned up this app (https://play.google.com/store/apps/details?id=com.sonalight&hl=en), which supposedly can read/send text messages by voice alone.
As far as physical buttons go, well .. that's something you're just going to have to get used to, sorry

tengen said:
AFAIK, I don't think Google Now will do the things you want it to do out of the box. If you're willing to use third-party apps, though, I think you may be able to get the behavior you need by using Tasker
Click to expand...
Click to collapse
How would Tasker accomplish this?

thanks for all the responses
is there itleast a way i can activate voice dialing from my headset button, i feel like that must be a feature for driving
i now have no lock screen, and when holding down the middle button of my headset, still get nothing
please help.

vicson88 said:
thanks for all the responses
is there itleast a way i can activate voice dialing from my headset button, i feel like that must be a feature for driving
i now have no lock screen, and when holding down the middle button of my headset, still get nothing
please help.
Click to expand...
Click to collapse
I have the same issue , headset button doesn't start voice while screen is off even if there is no screen lock ... Bit daft
Sent from my Nexus 4 using xda premium