Hii
i have questions please hope i find my answer here i'm sure from that
1- how to make a custom ROM with spb theme
i mean how to cook the SPB theme with my ROM by SPB 3.5
2- i want to change the official theme of SPB to Hero Theme but how to make that when i'm the cookers here :S
3- how to make the spb theme after cooking is the first theme for the boot for my ROM
i mean delete all the themes and make the spb theme is the booter theme
hope anyone help me
and thanx again guys
and sorry for my English
HaKiM
SPB is a 3rd party app which you need to purchase. XDA does not allow warez in any shape or forum whether you are requesting or providing it.
Consider this 1st and last warning on this matter
EDIT
I notice you have edited first post and removed warez request & my comments
ok man i will buy it but how to cook it with my ROm after buying it man ??? please if you know can u make a reply by the way thanx so much
It's like cooking anything else in: install it, grab all the files and registry keys, then put them in an EXT. Try to get it to work straight out of \windows (possibly change registry key paths and shortcut paths); if that doesn't work, then you need to send the files to their own directory.
and if it has setup.dll in the cab you CAN compare the registry before and after installing the cab by sktarcker or ceregedit and export it in the App.reg
it's Not easy to do this , YOU SHOULD WORK ON IT !!!
and some times setup.dll removes and rename some files
BTW : Warez app , Requests , releases are Not Allowed in most Forums
cheers
sameh_elhakim said:
Hii
i have questions please hope i find my answer here i'm sure from that
1- how to make a custom ROM with spb theme
i mean how to cook the SPB theme with my ROM by SPB 3.5
2- i want to change the official theme of SPB to Hero Theme but how to make that when i'm the cookers here :S
3- how to make the spb theme after cooking is the first theme for the boot for my ROM
i mean delete all the themes and make the spb theme is the booter theme
hope anyone help me
and thanx again guys
and sorry for my English
HaKiM
Click to expand...
Click to collapse
If you just want to cook this in for personal use or even the trial that's fine. Nobody can impose restrictions on that.
The way I did it is I dumped the cab to an OEM using the CAB2OEM tool floating around XDA (search for it by name).
Add it the resulting OEM to your kitchen like you would any other regular OEM package.
If you'd like to also cook in all your customizations... export the SPB Mobile Shell 2 registry key that gets created after you install SPB.
Good luck...
p.s. I looked at the original post and you did ask where to get the "final SPB cracked" version. We don't allow that here (warez or warez requests) and please leave the moderator edits in place next time you edit your post. Thank you!
NRGZ28 said:
If you just want to cook this in for personal use or even the trial that's fine. Nobody can impose restrictions on that.
The way I did it is I dumped the cab to an OEM using the CAB2OEM tool floating around XDA (search for it by name).
Add it the resulting OEM to your kitchen like you would any other regular OEM package.
If you'd like to also cook in all your customizations... export the SPB Mobile Shell 2 registry key that gets created after you install SPB.
Good luck...
Click to expand...
Click to collapse
thank you so much for this information
but i have a problem with how to export the reg key from phm reg.
and use it in cooking
2nd - how to change the theme from the official like i said hero theme or htc style
3rd- how to make it is the first theme boot cuz i have to load the rom on my omnia and after sign in i have to press on spb theme button but i want to make it the default
thanx again
If you wanna take the easy way out, you can use my EXT package as a base for customizing:
http://www.mobileunderground.info/indagroove/SpbMobileShell3.5.zip
indagroove said:
If you wanna take the easy way out, you can use my EXT package as a base for customizing:
Click to expand...
Click to collapse
thank you so much for your ext package i will make a compare between the package i have and yours and i will see if i had any problem in my package after your permission thanx man
FYI, I should have mentioned my package is for WVGA devices.
Related
Hello & good morning Every body.
I need a lot of answers to Cook a WM6.1 rom. here are my questions :-
1- How can I convert Cab files into OEM ?
-------------------------------------------
2- How can I modify them to relocate the short cuts to different folders ?
-------------------------------------------
3- How can I delete the Help files from it?
-------------------------------------------
4- what are the tools I need in cooking a rom ?
-------------------------------------------
5- How can I add the OEM packages in the rom ?
-------------------------------------------
6- How can I delele the programs or files that I don't need from the rom ?
-------------------------------------------
7- Do I have to modify the registery and how can I do that ?
-------------------------------------------
8- I read that the net compact framework 3.5 is better than the 2.0, so how can I replace the 2.0 by the 3.5 ?
-------------------------------------------
9- I like the Spb mobile shell and the other Diamond skins for the windows applications like the dialer, the calculaters , contacts and the Windows media player. So how can I merge this application to start as the today screen and how can I replace the windows skins with the diamond skins ? what are their pathways?
-------------------------------------------
10- How can I replace the File explorer with the resco Explorer ?
-------------------------------------------
11- How can I create new folders in the start menu ?
-------------------------------------------
12- If I don't need the ram disk can I blend it with the rom ? I mean the programmes memory and If it possible will the device be faster ?
-------------------------------------------
I know that these are boring questions and It may waste your time but forgive me I'm just a newbie .....
Just finished the 5th medicine year ,, so If you need my help in medicine I'll be here for you......
My device is Himalaya ( Qteck 2020 )...
please answer my questions in detailed fashion ....
the help files are html documents.
you can find it in the dump folder.
to cook a rom, you will need a kitchen or a decompiler
the registry settings are in the dump folder.
you can edit them by using the windows editor
It's a bit difficult
Thanx for replying ,,, but which kitchen or decomplier should I use ?!
what is a dump folder ?!
if someone can make a tutorial doc with sceen shots that helps me to Learn it will be surely appreciated......
but Even If I cook A new rom I need to add some cabs to it so how can I do that ?!!!
For a start, I think the Himalaya forum may have some helpful info: http://forum.xda-developers.com/forumdisplay.php?f=243
This thread: http://forum.xda-developers.com/showthread.php?t=378987 has a link to the kitchens for the Himalaya.
thanx l3v5y
o.k. these are the kitchens but infact I'm not professional in using them in other words I need some on do demonistrate the steps to me ?
I need to create my own packages from the cab files I have ,,,, so plz can some one EXPLAIN it to me ?
by the way I think cooking roms or reprogramming is more difficult than studing Medicine ......
On the first point, I think trying things out is probably the fastest way to learn... Make small changes, see what happens, and then make bigger changes.
To create OEM packs, you need something like ervius' package tool. here
You need to load the cab file (press the button to do so), and then that will open "MSCEInf". In that program, you'll need to extract the files (It's a button on the top tool bar) to the default location, then close that program and follow the options through with the package creator.
Real progressing
o.k. let's say that I wanna use Avis 6.1 kitchen I'm downloading it but the problem is taht It comes with Chekhar's Rom ( 19199 ) but I wanna use PDAviet WM6.1 ( 19213 ) ?
So how can I replace the chekhar's rom ?
and how can I put the package in the rom ( just coping ) or by using a special too ?
and How can I delete some softs from the rom ?
Could you demonistrate an Example here with explanatory Pictures> I'm just a newbie
Thanx l3v5y So much
look here: http://forum.xda-developers.com/showthread.php?t=391087
cyron_at said:
look here: http://forum.xda-developers.com/showthread.php?t=391087
Click to expand...
Click to collapse
That doesn't apply well to the Himalaya, as there is a different ROM structure...
Oweida said:
o.k. let's say that I wanna use Avis 6.1 kitchen I'm downloading it but the problem is taht It comes with Chekhar's Rom ( 19199 ) but I wanna use PDAviet WM6.1 ( 19213 ) ?
So how can I replace the chekhar's rom ?
and how can I put the package in the rom ( just coping ) or by using a special too ?
and How can I delete some softs from the rom ?
Could you demonistrate an Example here with explanatory Pictures> I'm just a newbie
Thanx l3v5y So much
Click to expand...
Click to collapse
I'm sorry, but I have no idea about the details of Himalaya cooking... I can do Prophets, but not them...
I'd suggest asking in one of the Hima threads, or maybe a mod could move this?
Unblievable
I was hoping it would be beneficial and useful school
o.k.
no problem,,,, If any buddy can help me with avis kitchen how can I replace it's rom with the WM6.1 PDAviet ( 19213 ) and how can I put the package on it ??
L3v5y thanx for ur time
Oweida said:
I was hoping it would be beneficial and useful school
o.k.
no problem,,,, If any buddy can help me with avis kitchen how can I replace it's rom with the WM6.1 PDAviet ( 19213 ) and how can I put the package on it ??
L3v5y thanx for ur time
Click to expand...
Click to collapse
If I could be more help, I would!
I think that kitchen may only be able to use that ROM... Try one of the other kitchens... You'll need to dump the ROM and then rebuild it...
My Brain is getting Fried
Plz at least , I need someone to help me to package my cabs...
I do have the Package Creator, I even Packaged a cab but the problem is I need to delete some files ,, such as help one and I need to replace / relocate some inks also when I'd packaged it I didn't find the resultant file although it was saying packaging completed successsfully.....
I've been reading the tutorial on wiki and some threads provided in the forum but, I did not understand anything although the manual method looks somehow easier than the automated method using the creator program but it takes a long time with someone impatient like me.....
what I need is an Example demonisterated thoroughly and precisely .
since I'm using the Quickmenu I had been sorting my softs into many folders , Multimedia , Utilities , readers , E-Books, etc but some of these softs are installed on my SD card because of shortage of Storage Memory ( Device one ). It's just a 30MB. So if there is any Expert in packaging issue to help me or and that's unfortionate I'm gonna give up the whole Idea of Cooking and baking....
Thanx brothers.
Oweida said:
Plz at least , I need someone to help me to package my cabs...
I do have the Package Creator, I even Packaged a cab but the problem is I need to delete some files ,, such as help one and I need to replace / relocate some inks also when I'd packaged it I didn't find the resultant file although it was saying packaging completed successsfully.....
I've been reading the tutorial on wiki and some threads provided in the forum but, I did not understand anything although the manual method looks somehow easier than the automated method using the creator program but it takes a long time with someone impatient like me.....
what I need is an Example demonisterated thoroughly and precisely .
since I'm using the Quickmenu I had been sorting my softs into many folders , Multimedia , Utilities , readers , E-Books, etc but some of these softs are installed on my SD card because of shortage of Storage Memory ( Device one ). It's just a 30MB. So if there is any Expert in packaging issue to help me or and that's unfortionate I'm gonna give up the whole Idea of Cooking and baking....
Thanx brothers.
Click to expand...
Click to collapse
For packages, this: http://wiki.xda-developers.com/index.php?pagename=OEM Package Tutorial is the most thorough tutorial.
Hi all,
Is there anyone who has the original theme of the SPB Mobile shell working on a Samsung i780 (320x320 resolution) in combination with realvga? So with the original icons and layout.
I use now the one that was mentioned in the old thread 'SPB Mobile Shell 2.1 + i780 + RealVGA' but I hate the icons and basically just want to use the original theme which doesn't work out of the box on 96 dpi...
I hope anyone can help me with this I would be extremly thankfull for that ;-)
Regards,
Nico...
Nico van der Linden said:
Hi all,
Is there anyone who has the original theme of the SPB Mobile shell working on a Samsung i780 (320x320 resolution) in combination with realvga? So with the original icons and layout.
I use now the one that was mentioned in the old thread 'SPB Mobile Shell 2.1 + i780 + RealVGA' but I hate the icons and basically just want to use the original theme which doesn't work out of the box on 96 dpi...
I hope anyone can help me with this I would be extremly thankfull for that ;-)
Regards,
Nico...
Click to expand...
Click to collapse
Hi Nico, just saw this thread. My apologies for not responding earlier. In regards to your question, you will need to uninstall spb ms2.1 first. Using total commander or resco file explorer, make sure that everything in the spb mobile shell directory is wipe clean.
As per the original thread, follow the instructions closely to re-install spb ms 2.1 again.
You have to make sure that spb ms 2.1 is installed in 128dpi mode.
After installation, run it under spb ms 2.1 to test out the program. It should run smoothly.
Run RealVGA again and set to 96dpi.
Soft reset.
Unzip the attached file and place it in spb folder to replace the qa_layouts.dat
Finally run spb at 96 dpi. The screen should be aligned to 320x320 now and all icons should be stock.
Hope this helps and let me know if you faces any problems.
Hi g00ndu,
first of all you don't have to apology, I am already extremly thankfull that you are willing to put some time and effort in it to help me with this, that is much appreciated!
The dat file you provided does work indeed to get me the old icons back thanks for that. However, if it is possible, could you also make the dat file so that it also restores the pinned icons on the top? So the default SPB theme layout? That is the only thing I am missing now.
Also I have just another small question, when I read the original post in the past I had difficulties to get it to work (pressing the SPB shell link just didn't do anything) I noticed on other forums that more people had this issue. After a while I noticed that you mentioned version 2.1. I did manange to find an installation file of this version on the internet, however the reason that I had issues in the past was that when you download the cab file from the SPB website you get version 2.1.1 and that doesn't work with the work instruction you provided. I do not have a special need for this new version if it is too difficult but do you have any idea why it doesn't work with the 2.1.1 version and would it be possible to get this dat file you will create to work with that version as well?
Anyway thanks again already for your great help.
Kind Regards,
Nico...
Let's take this via Private Message. We do not want to clutter this forum. I will PM you now.
Apologies to the mod, but there is no other way which I can attach the file for Nico.
@Nico,
Please use the attached file and check if it works. You should have the 12 pinning icons with 6 program icons in your launcher.
If there is some messed up icons, I apologise as I did not have the means to debug. Possibly you can upload to imageshack and link it over here.
If it works fine, just pm me.
hy all. i have a problem (wish): i want to install a clean rom ( i have it allready) and i want to customize it with the programs that i want to, and then, to save this rom (i supose that i have to dump it and reconstruct it) exactly with my settings/applications/etc. can i do that? if I can, how? thx alll.
When you customize your polaris on the device itself, it doesn't change the ROM on it. So dumping it will not give you a new ROM. You'll have to change the ROM on the desktop, and upload it afterwards. There are a lot of topics about ROM building.
ok. thx. i will go then to that topics. thx.
Yes but the problem is that all those posts are about porting a 6.1 rom from another device to polaris.
Now that we have a 6.1 rom how exactly do we cook it and flash it back?
Here's my problem: I have the PTG 6.1 rom, but I want to replace the CF2 with CF3.5 and replace TTN6 with TTN7, and flash it back.
I already have Kitchen 1.3, extracted the 'RUU_signed.nbh' and a dump of 03_OS.nb.payload.
Now, where do I go from here?. I want a rom that's exactly the same as the official one but with the changes I mentioned above.
I'm a complete noob at this cooking rom issue. I've read lots of threads but I've only gotten more confused about all the XIPs, SYSs, OEMs and stuff, and I think the same happens with other users.
I know that some of the actual cookers were once in the same place I'm now, so can someone point me out the rigth way and if possible post a detailed tutorial on how to extract, cook and flash back a rom on POLARIS, me and lots of users would apreciate it a LOT.
Second That Thought.
What would be nice to see (if possible) the following,
as an example:
1. Download Polaris ROM Kitchen v1.3
2. Extract to c:\Kitchen
3. Copy your ROM image (*.nbh) to X:\
4. Run command
...20. Install Package (M2D.cab) by doing the following ...
21. Recombine the ROM by doing the follow commands ...
22. Flash your ROM to your Polaris
23. Hard Reset and verify that the package you installed is in your ROM
Congrats
A step by step like that, which walks a user though the process of a demo ROM and a demo *.cab for learning would be FANTASTIC!!!
Thanks in advance to whoever can help us out!
Juxtyce
bump.
Any help from the professionals out there?
Look here:
1. .Net2.0 => .net3.5
http://forum.xda-developers.com/showpost.php?p=2685138&postcount=22
2. replace the ttn.cab file in the folder "\kitchen.work\Build\OEM\OEMAPPS" with the TomTom7 cab. If it don't have the same name, rename the new cab or edit the file 'config_AP.txt' in the same folder
hope it will help you I managed it this way.
P.S. I didn't change the XIP as mentioned in the given thread. See following posts
I will dump the wm6.1 rom for you guys, and provide you with a kitchen with some packages you can use.
I will do so for all available languages that is available with official wm6.1
But,that is gonna be quite time consuming, and I hope that you understand that I ask this in return:
Any small donation for the time I use on that will be of help.
I dont say that its required, not at all. I am not doing this for money.
But the number of hours I spend on this is getting pretty high.
I will do this project either you donate or not.
cheers
thank you a lot itje. can you make in romanian also?
dunno if it's the good topic to post but let's try.
I see many fantastic people cooking excellent roms (i wish i could do the same...), and, in those roms, a lot of softwares.
Isn't it possible to just have a rom with the bare minimum?
and seperate cabs to install what you want?
for example, manilla 2d is cool, but many people like spb mobile shell better, so it's wasted memory.
May be i'm just wrong, don't understanding how it all works, so plz explain to me !
ady_uaic said:
thank you a lot itje. can you make in romanian also?
Click to expand...
Click to collapse
if the language is available; yes
taniwha913 said:
Isn't it possible to just have a rom with the bare minimum?
Click to expand...
Click to collapse
There is a large choice of ROM's, some loaded with extra's, some very minimally equiped. There are so many that your favorite must be out there already. Just search for it.
Thanks to GODZSON for support concerning the fonts customisations!
>>Download Here<<
>>for thoose who wish to change the start screen <<
Installation :
Download the zip file on your computer. unzip. put the .teme file on your Diamond into the folder "/Internal Storage/Themes. (if it doesn't exist yet, create it)
Intall the "wallpapers" folder anywhere as you want on your Diamond. Those themes must be installed with TF3D config . Follow the developer's instructions.
To install on of the wallpapers, go to "Settings" tab on the tf3d and choose "wallpaper". The wallpaper only appear one the "Home" main screen of the TF3D.
Can a version be made for the Diamond for HD manila?
Another link please !!!!!!
Great post! Beautiful theme. Can you post just the tray icon files or even a .cab? your instructions are very simple I just don't use/need TF3D config. (I've encountered problems with it in the past). I'm running the stock rom with the old animated manila files over the top (could possibly be the cause of my problems but in a give and take between the two, i take animations). Thanks in advance
y on my touch diamond the weather page it display the temp as ...6 instead of 26?
i love this work, i hade the white 0.1 and thought that was fantastic. dont kno y but i quite like the white one to black but ill deffo check these new ones out straight away
nice work man
i only sceenshots of the theme running touch hd, could u provide screenshots of the theme running on Diamond?
thanks
Really great theme zitoun!
but configurator for Manilla does not work on my device-it can not recognize theme files?!
any other way to install these theme ?
Good luck!
thanx in advance!
drgrabez said:
Really great theme zitoun!
but configurator for Manilla does not work on my device-it can not recognize theme files?!
any other way to install these theme ?
Good luck!
thanx in advance!
Click to expand...
Click to collapse
use diamond tf3d config
@zitioun..weather temp numbers are messed up..great work
Same question like my friend (zmob123), is it possible to make this theme to work in Xbmod HD manilla in Diamond
one question. How can I uninstal pictures with money box?
wow that is really nice, probs the best iv seen for touchflo thanks
Thanks again man, these ones are amazing! Think they might be your best ones yet!
When i can afford it a donation is on its way to you!
magic1972 said:
one question. How can I uninstal pictures with money box?
Click to expand...
Click to collapse
>>for thoose who wish to change the start screen <<
how can I reverse the TF3d fonts to the standard fonts again???
i have installed the themes and TF3D fonts of Zitoin. I do not like them. but i cannot reverse the installation now.
how can I reverse the TF3d fonts to the standard fonts again???
can someone help me?
thnx
zitoun said:
Thanks to GODZSON for support concerning the fonts customisations!
>>Download Here<<
>>for thoose who wish to change the start screen <<
Installation :
Download the zip file on your computer. unzip. put the .teme file on your Diamond into the folder "/Internal Storage/Themes. (if it doesn't exist yet, create it)
Intall the "wallpapers" folder anywhere as you want on your Diamond. Those themes must be installed with TF3D config . Follow the developer's instructions.
To install on of the wallpapers, go to "Settings" tab on the tf3d and choose "wallpaper". The wallpaper only appear one the "Home" main screen of the TF3D.
Click to expand...
Click to collapse
Install the CAB provided with the archive you downloaded
kucles said:
i have installed the themes and TF3D fonts of Zitoin. I do not like them. but i cannot reverse the installation now.
how can I reverse the TF3d fonts to the standard fonts again???
can someone help me?
thnx
Click to expand...
Click to collapse
There's one cab within the archive file you downloaded, which will restore the font back to original. All the info are in the readme file .
Just remove the "\windows\welcomehead.192.png"
magic1972 said:
one question. How can I uninstal pictures with money box?
Click to expand...
Click to collapse
Just remove the file "\windows\welcomehead.192.png". Or, create your own Welcome file. Do a google for keyword "welcomehead.192.png" and you should be able to find link to readme on how to create this file.
From my vague knowledge on the ROM image, the original "welcomehead.192.png" shall get reinstate once you remove the money box one follow by a soft reset.
how to remove T-Mobile name. my network is not Tmobile
Where can i find the fonts used in this theme (manilla and windows fonts) ???
I want to make my own naked rom. What files can i delete?. I am using ervius kitcen and i don't want manila in my rom.
vbeli said:
I want to make my own naked rom. What files can i delete?. I am using ervius kitcen and i don't want manila in my rom.
Click to expand...
Click to collapse
Here is WM6.5 packages list: http://forum.xda-developers.com/showpost.php?p=4268166&postcount=5
You can find which ones are required and which ones are optional. Also, if you use Ondraster kitchen it shows these in it's list.
And finally, if you have more questions and need to know more details feel free to submit them.
Regards
TAEL said:
Here is WM6.5 packages list: http://forum.xda-developers.com/showpost.php?p=4268166&postcount=5
You can find which ones are required and which ones are optional. Also, if you use Ondraster kitchen it shows these in it's list.
And finally, if you have more questions and need to know more details feel free to submit them.
Regards
Click to expand...
Click to collapse
I have some queries, since this thread is related to removal of modules, I am not wasting another thread :
1. I do not need Titanium, will it cause any problem (stability related), if I delete Bronze, bronzeNonEA and CHome from Sys?
2. I have removed LockScreen, LockScreenNonEA (SYS), LockScreenAppLauncher, PACKAGE_MEGA_LockScreenAppLauncher_Default_Skin (EXT Folder). But still Windows Default is an option in the Settings->Lock drop down list box, any way to remove it?
3. In Ervius Kitchen what is OS ID (0x400 it takes as default for Mega) and Chunk (64) ?
BTW I am using osKitchen and cooking for HTC Mega T3320.
Please revert back if possible
1.- Its ok to remove that pkgs to get rid of titanium... That will cause you... gain 3MBRAM more.
2.- Yes to get rid of the lock screen you will have almost 2 more MB RAM free for your rom... and the default windows mobile WM5 lock screen... cant be disabled...
3.- I always have this question so i cant answer you.