Related
Requesting all those great Rom cookers out here to create a Rom with Manila2d in it. No, not on ExtROM but inside the ROM itself. That would be faster better and faster I think.
ebautista said:
Requesting all those great Rom cookers out here to create a Rom with Manila2d in it. No, not on ExtROM but inside the ROM itself. That would be faster better and faster I think.
Click to expand...
Click to collapse
Integrated Manila 2D into cooked ROM is surely a better solution, however most people prefer a clean ROM. Beside due to limitation of the flash size (32MB i think), it would requires to remove lots of even basic application come with the ROM.
not possible due to limited 32 mb storage. even the mms is not included in any ba wm6 rom so can u think for Manila.
ebautista said:
Requesting all those great Rom cookers out here to create a Rom with Manila2d in it. No, not on ExtROM but inside the ROM itself. That would be faster better and faster I think.
Click to expand...
Click to collapse
krishan2207 said:
not possible due to limited 32 mb storage. even the mms is not included in any ba wm6 rom so can u think for Manila.
Click to expand...
Click to collapse
exactly...
M2D cooked in
I'v tryed to fit "M2D" in a cooked ROM you can get the main files in there' But not enough of the image files, I also did some test builds "without" the calc, media player,dialer,and commManager skins, And Flashed them from "ExtROM" as Themes It Seamed to Work fine But you would still Be adding A large number of files Via ExtROM so not much to be gained (can't say It was any different speed wise)
My origonal Idear was Adding skins to your device like this may, make rom's more fun and the user could change Skins From *.cab files (Themes)
So If you fancy a try and some people are intrested in making some Skins then I'll cook My New V3 and working version of M2D into a "ROM" With all Skins Removed and Post it with One Full Set of Skins in CAB files and folders of files for you to edit and i'll even pack some of your Themes into CABs and we'll see what Comes of it
I would like at least 5 people to be intrested in assisting with skins as I don't Have enough time to do it all
So If you would like to have a GO then you need to say SO or i'll not bother that's my offer regards
swampy395
I think it is a great idea, manila2 in a cab with no skin, and the default skin in a separate .cab so we can replace and tinker with it at leisure
I am in to give a hand!
Ok people think about it just for a minute, Manila 2D has a size of 12 mb, with a rom of 32 mb even if it is compressed we have to cut a lot of things from main rom to make this possible, and the the stupid questions will come, why this or that not work. Thats why i am working on a proper kitchen so the people can choose whatever packages they want in rom and make it themself. So if the rom does not boot or has audio video formats problems or software compatiblity problems this will be the builder configuration fault not mine or any other rom cooker.
Also you can use my last kitchen but you need to add options.xml in OEM and SYS folder to choose the packages
swampy395 said:
My original Idea was Adding skins to your device like this may, make rom's more fun and the user could change Skins From *.cab files (Themes)
Click to expand...
Click to collapse
Well this is good as idea(i mean the complete customization from cabs and saving space from the skins in the rom area) but you have to make manila not to load on startup because without skin it will just crash and you will have to reset, and there will be infinite loop ...
xplode said:
Also you can use my last kitchen but you need to add options.xml in OEM and SYS folder to choose the packages
Click to expand...
Click to collapse
I would love to give this a try, but I don't know enough about the interdependencies of the root packages to build a reliable options.XML file. Could you post a list of the diff packages that are part of the ROM with a notation of which are required, which are nice to have and which can be left out? If you do, then I will try to build an Options.xml file and post it for testing with your kitchen.
I have modded manila2d so the default skin is no more and instead one more of my liking. The resulting cab is 100KB smaller...
It boots fine
Will be posting today
gloomyboy said:
I have modded manila2d so the default skin is no more and instead one more of my liking. The resulting cab is 100KB smaller...
It boots fine
Will be posting today
Click to expand...
Click to collapse
you cooked it in rom or what ?
No, I haven´t gone yet for cooking, I just tinkered with the .cab files in the ExtROM folder.
See my separate thread for details
Themes
Hi guys
NO fighting
As my previous post I did some tests and I could get enought of the M2D files in the ROM for IT to boot! and from "rom boot" to "ExtROM Finnish" it doe's not try to load M2D, first load of M2D is after the reset that Terminates ExtROM loading BUT I had to remove 'Calculator,Dialer,WM_Player skins,ring tones and some shortcut, The rom I tested for about 4 days and was as stable as any rom!, And here's a BIG "BUT" Keeping track of all the bits that are needed is a some TASK! in short it will work but it's hard work
swampy395 said:
Hi guys
NO fighting
Click to expand...
Click to collapse
Fighting???? We are all friends in here.
swampy395 said:
As my previous post I did some tests and I could get enought of the M2D files in the ROM for IT to boot! and from "rom boot" to "ExtROM Finnish" it doe's not try to load M2D, first load of M2D is after the reset that Terminates ExtROM loading BUT I had to remove 'Calculator,Dialer,WM_Player skins,ring tones and some shortcut, The rom I tested for about 4 days and was as stable as any rom!, And here's a BIG "BUT" Keeping track of all the bits that are needed is a some TASK! in short it will work but it's hard work
Click to expand...
Click to collapse
I can live without all of the things that you removed as I use alternates for all of them which are loaded into storage anyway and just waste the ROM space.
BUT, as you say, I don't have enough knowledge to know which parts can and can't be dumped from the core ROM. That's why I asked Xplode to make a list. If you can make some kind of list, I'm willing to try and build a suitable options file to be used with his kitchen.
Another thing. I may be slow, but I can't figure out what parts of M2D are in the ROM and what parts are being installed via CAB. I opened the M2D cab and I see that the executables are still in there. If they are in the CAB, what are you loading in the ROM?
motisu said:
Fighting???? We are all friends in here.
I can live without all of the things that you removed as I use alternates for all of them which are loaded into storage anyway and just waste the ROM space.
BUT, as you say, I don't have enough knowledge to know which parts can and can't be dumped from the core ROM. That's why I asked Xplode to make a list. If you can make some kind of list, I'm willing to try and build a suitable options file to be used with his kitchen.
Another thing. I may be slow, but I can't figure out what parts of M2D are in the ROM and what parts are being installed via CAB. I opened the M2D cab and I see that the executables are still in there. If they are in the CAB, what are you loading in the ROM?
Click to expand...
Click to collapse
Hello again
I didn't publish that ROM, It was a test 'only' My M2D roms have most of the today plugins removed from rom as you don't need them, you can only have M2D plugin running!! If you remove WMP you loose so many formats 3gp etc. There are many things you can install from cab But cannot leave out thay have to go back in, The end finnished rom plus cabs is just the same size so y bother
P.S. If your useing a swampy rom then you can flash new skins from a cab
Swampy, if you cook my modded M2D you will have some 100Kb more to play with in the first place...
Now, if you zip up your ´Removed´ folder after cooking a barebones rom with M2D in rom we can help you build .cabs that would go in ExtROM an hence we would have a much more modular design
Taskmanager is a good candidate to go on a .cab, some people like one some like another. It pains me to see two installed
Swampy, but there is an alternative to Windows media player,
Mplayer, a 4megs cab. Supports many formats, it is lean and a standard in Linux (available for Windows Mobile)
Download MPlayer for Windows Mobile
You could remove everything to do with windows media player and put them on a .cab, then give users a choice; windows media.cab or mplayer.cab
swampy395 said:
Hello again
I didn't publish that ROM, It was a test 'only' My M2D roms have most of the today plugins removed from rom as you don't need them, you can only have M2D plugin running!! If you remove WMP you loose so many formats 3gp etc. There are many things you can install from cab But cannot leave out thay have to go back in, The end finnished rom plus cabs is just the same size so y bother
P.S. If your useing a swampy rom then you can flash new skins from a cab
Click to expand...
Click to collapse
Sorry, but I'm still not following you. In the first post of your 20275 thread and in your sig, you have a M2D version. If this isn't the M2d in ROM version, then what is it? If all that you did was leave out the today plugins, what did you use the extra ROM space for? Also, I never use WMP as almost any other player is far better IMHO (Coreplayer, S2P, Tcpmp,Mortplayer, Etc.) If I don't use it, will I still need its support for diff file types?
Swampy´s M2D roms don´t contain M2D in the rom itself but will install it in rom from the storage card whenever you do a hard reset.
So it is basically loading the extra stuff from a custom ExtROM folder in the storage card
Of course I agree it would be better to have M2D in rom proper and say windows media player in a .cab in the ExtROM folder so it can be easily removed if you don´t want it (I certainly don´t want it)
gloomyboy said:
Now, if you zip up your ´Removed´ folder after cooking a barebones rom with M2D in rom we can help you build .cabs that would go in ExtROM an hence we would have a much more modular design
Taskmanager is a good candidate to go on a .cab, some people like one some like another. It pains me to see two installed
Click to expand...
Click to collapse
I agree with gloomyboy. Since there are SO MANY differnt app/utilities that more or less do the same thing, it stands to reason that everybody will have their own preferences. If someone could build a kitchen that really allows you to pick and choose what goes into the ROM, everybody could custom tailor their ROM for what they really use. Unfortunately, AFAIK, all of the kitchens available today only allow periferal change and not major systems changes. I don't know why, maybe it is just my lack of understanding of the core requirements of a ROM and it can't be done any other way. But I can allways wish....
gloomyboy said:
Swampy´s M2D roms don´t contain M2D in the rom itself but will install it in rom from the storage card whenever you do a hard reset.
So it is basically loading the extra stuff from a custom ExtROM folder in the storage card
Of course I agree it would be better to have M2D in rom proper and say windows media player in a .cab in the ExtROM folder so it can be easily removed if you don´t want it (I certainly don´t want it)
Click to expand...
Click to collapse
OK, now I get it. I do that myself with my own home grown EXTROM based more or less on Xplode's new release of M2D with all sorts of shortcuts and config files being copied from my SD card into memory. I am constantly changing my cfg.txt file to include newer versions and getting rid of apps and utilities that I find that I don't use. I think that the ROM should contain all the permanent stuff that will fit and I can't function without.
As reg66 said the other day we are a few people cooking ROMs for the Polaris but there is not such a chef corner in the polaris forum. So I propose this thread to exchange techniques, tools, etc.
Anyway I will use this thread as my own cooking repository and share as I learn myself. Feel free to contribute but please keep the posts ontopic. Most of it will be about cooking with 6.1 kernel for QVGA devices.
this 1st post is updated with the relevant information up to post 39 (take me there)
the 2nd post is about non solved specific questions in case one cooker can help another 5 (take me there)
Radios:
Please feel free to report radios tested to run on the Polaris (or links to compendiums)
Which radio to use? depends on the drivers you use...
Kitchens:
Please feel free to report kitchens and sys tested to run on the Polaris (or links to compendiums). Kitchens available are basically three: Ervius Visual Kitchen, Ondraster kitchen (two versions: old and new UI) and traditional kitchens (simply cmd scripts and exe tools, maybe someone wants to share a polaris non visual kitchen). Most of the kitchens come with mega packages, some others come naked or with leo packages. Choose the one that best suits you.
Gullum EVK's Kitchen wm6.5 23016. My first kitchen, I love it. Mega based
Amenatis EVK's Kitchen wm6.5 21891/28008 040C and almost 0409 Very refined kitchen, not only cabs and packages but a very well implemented OEM and Registry. Leo Based
osKitchen NEW UI v1.25 - Easy Visual Kitchen I tested and has easy startup tweaks and splash integration and very good description of packates.
TranMinhMan EVK's Kitchen WM6.5 with MANILA 2.0 at PDAVIET Requires registration. File password: TranMinhMan. See post 7 for direct links to the 3 parts of the file
TomAngel Ondraster's Kitchen wm6.5 builds 23088, 23518, 28008 and 28205 Includes both 6.1 and 6.5 kernel and is Multilanguage (check the thread also to learn how to use the wm6.5 kernel and seems to be working. It works nicely in my ROMs that seem to work better (as if it had a higher PP). There is not consensus on the performance improvement however. The main advantage is to avoid recmoding, since performance it is not so much affected and depends more on drivers. I personally believe recmodded apps open slower but there is no big science behind this thought. Check TomAngel's post for details).
niax kitchen wm6.5.X (by Nikkito) Spanish kitchen at htcmania.com forum - the forum is in spanish, look for a mediafire link in the first post - does not require registration to access the kitchen.
vistang's kitchen (did not manage myself)
Cooking takes lots of time. Be sure you backup your kitchen whenever you have consolidated a bunch of improvements. Sometimes files may get corrupted or if you change many things at a time, it may be difficult to go back to previous situation and also to fix the errors. Therefore, even if it is a pain, I recommned to zip the whole kitchen from time to time.
Another good practice is to keep a second folder with your kitchen tools, in case you have to restore the whole kitchen from scratch.
Kitchen Tools and Scripts:
I have the pleasure to introduce my collection of tools, ready to use with Ervius Visual Kitchen (and I guess, easy to adapt for other kitchens). Please check this post
Batch Recmoding (please donate to xtep): With this tool you can recmod automatically only the modules you want to, since recmodding everything will deliver a slower/bigger ROM (working on windows vista, includes instructions on how to use)
Tools for importing SYS into VK and auto recmod (please donate to xtep)
Dump sorter for the rollup´s of eg Da_G new releases thread
Create a custom splashscreen (steps 1 to 4) and add it manually (rest of steps)...or...automatically when generating the ROM
Pagepool changer (external, do not know if it is the one used in EVK)
Edit hv files
NBHextract (by pof): Extract contents from NBH files
Itsme amazing tools There is a wiki explaining it. Here in this post you will find some hints on how to use
Kitchen tools collection at mobileunderground (requires registration) Apps that can be downloaded (I will delete the reference of those taken from xda as I replace by links):
Sqeezer (Compress .exe files to save space and speed up programs) / rgu-2-xml (Converts .rgu to .xml to create provxml files) / reshack (open .dll and .exe files to replace icons) / OEM version checker (check the version of your oems in kitchen on in device) / SYS version (find the sys version of your sys packages) / ThemeGenCE (use to create 6.1 themes, may work for 6.5 too -- not sure) / Manila Editor (Edit Manila Files) / CFC - (Chainfire's Manila tool to compress, decompress, and edit manila files) / MakeCAB (Window's free tool to make cab files) / NBH Tool - Dutty's tool for convertint to,from .nb,.nbh /
Dump Sorter - tehpenguin's tool for sorting and cleaning packages / Msigner - For signing your modified .dlls / ROM Editor - For dumping ROMs
SuperRecMod - JooJooBee666's tool for converting modules to files / Bepe's xidump attached -- info here http://forum.xda-developers.com/showthread.php?t=572673 / Alexx~'s tools to extract dio file attached / WinDiff - Compare 2 files or directories to find the differences (great for comparing reg files) / WinMerge - Compare 2 files or directories to find the differences (great for comparing reg files) / cab converter / createloc - It create the local language tree when you using the VisualKitchen.
Reviews of several kitchen tools (hilarieg's sticky at chef central) For each app you'll find download link, explanation and reference links. Apps reviewed so far (4 april 2010):
Device Side Manifest (.DSM) Editors (BuildDSM / DSM Analyzer / DSM Builder / DSM Dependency Dumper / DSM Editor)
Some Da_G reading about dependencies, certificates and shadow packages
Editors (EditPad / XML Notepad)
Graphics (.BMP, .JPG, .PNG, etc.) (IcoFX)
Process, Registry (FDC Task Manager / Registry Workshop)
Resource (.DLL, .EXE, etc.) ( Dependency Walker / Resource Hacker)
Search/Comparison/File Managers (Beyond Compare / Compare It / Directory Opus)
WM6.5 ROMs:
1. Flash SPL: This great tool basically makes safe to flash Custom Roms. Additionally, procedures are well known and available to restore original SPL and ROM in case you need to send your device to a technical service without loosing guaranty.
2. Flash Original ROM (recommended by most chefs, mandatory if you observe inestability issues when flashing a custom ROM
3. Install your favourite custom ROM (most chefs recommend hard reset after flashing)- Some people recommend to removed sd card. I have long been doing the opposite flashing from the SD Card.
Please feel free to report ROM's links or compendium of ROM Links. The only requirement is to add a description of the basic attributes (preferably by the author of the ROM). ROMs do not include radio unless specified, follow the link to see the author's original thread.
[WWE] pcarvalho eXtreme ROM 3.19 WM6.5 OS 5.2.21882/23547/28014/24001 and many others R0 Standard driver and 3d drivers versions
[WWE] Kostas244-Rom-23016 A1-B4/23414 C2/23541 D1
[WWE] Alex-V 23529+LITE Rom Manila2d with or without flipp clock
[WWE] cruiserrr 23016 Lite, XDA and Full releases (based on gullum's kitchen)
[WWE] cruiserrr 23569/28008 Lite (based on amenatis kitchen)
[WWE] eXXon ROM's - Naked|Clean|Lite - 23016
[ITA][WWE] Megan & MeganLite SERIES WM6.5
[ITA] ilSalgo_V0_WM6.5 Build 23504
[SPA] NiAx Pola 6.5 MultiROM - 21854/28008/23544
[GER] Alex-V 23529/23016 Rom + LITE->with Manila2d
[GER] TomSte V1 WM6.5 Build 23016 GERMAN MEMORY FIX
[FRE] Polaris AmenatiS-6.5 M2D 21232 Blue 3G V2 Great ROMs with amazing customizations optimized for the different french operators.
Please, post your reference wm6.5 ROM in other languages
You are an end user? Which rom is the best? This depends on your needs. There is some posts about user experiences in this thread and of course on the ROM threads themselves. My advice is to try a few ones, several days each. Then you will have no doubt and that won't kill your device (I did not dare at the beginning but I have flashed my device ... quite a few times...)
You are a cooker and want to be? Do not invent the wheel. Liason with the cooker that is working in the line you like and ask him what you want to do and what is the best starting point. You will be surprised how helpful people can be.
Dammit ! I bricked my cruise... Stay calmed and take some lecture
SYS Sources (thanks alexander for both links)
Recmodded sys files + tips and tricks (only english) (by Duron23)
Htcpedia WM6.5.x Build Release for Chefs Complete releases (all dpi/all languages). Requires registration
Da_G WM6.5.x latest releases: Complete releases (all dpi/all languages) and tips&tricks (check initial posts to find all sys packages description)
XBeta...
DarkForcesteam...
PPCKitchen sources can not be used directly. A script is needed to change fileattributes automatically, since ppckitchen handles files in a different way.
Do not overload your kitchen with lots of releases since the cooking time grows a lot.
SYS Fixes (sticky in chef central)
We use wm6.1 kernel which means it has a limit on the number of modules it can cope with. If you do not get a bootable Rom then recmod some more modules. No consensus on which ones, how many or in which slot. As pcarvalho says, it does not matter if it does the job.
How to update your kitchen to the latest builds?
Does your kitchen suffer S.O.D.? My experience is that is not a kitchen or sys problem, it has to do with oem/ext htc packages (specially htc notifications and volume control) or start menu cooking. However, other people are reporting other reasons such as the tools used to cook or corrupted modules.
Sys description
Best explanation I can give is:
COM1- Builds 217**:
COM2 - Builds 218**: GUI is 1st stage of finger friendly features implemented. This is the only official WM6.5 released to public. All other COM* Builds are leaked test builds (not even classified as alpha or beta). In this range, the GUI introduces softer corners to various dialogs, the new start menu (Very early builds had a honeycomb theme but although the hexagons have been removed, the icon alignments remain), and the taskbar and menubar have been slightly modified to allow for further skinning.
COM3 - Builds 230**: GUI from 23001 to 23021 looks the same as COM2. 23022+ introduced the new shorter/expanding taskbar and finger friendly text-based buttons on taller bottom menubar and ever since its been called wm6.5.1 rather than 6.5..
23047+ introduced icon-based buttons.. New checkboxes and scroll bars and recently (from 23069 i think) a magnifier in the taskbar are amongst the newer gui elements introduced in the latest builds..
At some point (im not sure when, kinetic scrolling was introduced..
It appears that COM4 elements are being introduced into this branch such as the new contact application, a slightly modified sms application, and possibly a slightly modified calender application..
COM4 - Builds 234**: Seems to have stopped at 23420. The newer contact application and possibly the modified sms and calender applications were first introduced in this branch but have since been incoorperated into latest builds of COM3
COM5 - Builds 235**: At the moment little is known of this branch. 23502 is the first build leaked that Im aware of. It seems to have been compiled at about the same time as 23060 but with superior stability, speed, memory management, Newer COM3 builds 23071 and above have been reported to be superior in terms of stability and speed. However the latest COM5 23506 compared to COM3 23088 (build date is identical) seem equally fast and stable. COM5 builds have the new Contact app and Magnifier, as in latest COM3 Builds, but lack kinetic scrolling.
Apparently, the new internet explorer has been modified as well (but Bikertibi Builds have the old internet explorer from wm6.1 because new one does not handle well on our device)
Other branches you might or might not come to see:
AKU1 - Builds 212**
SAM1 - Builds 215**
MD1 - Builds 219**
WMD - Builds 28***: The First Build leaked is 28002 (build date 17th November 2009). As of this branch Windows Mobile is at WM6.5.3. This branch is to continue from COM3 23090 and is believed to carry improvements to the New Internet Explorer Mobile as well as overall speed
Builds 216**: leaked builds that have been played with by the team over at HTC but not officially used on any handset as yet
Builds 236**: Recently came across these builds but have no further info on them
Click to expand...
Click to collapse
EXT QVGA packages repository:
Profile Selector (by cruiserrr).
Quick GPS WM7-ish (white letters, dark background, thanks pcarvalho)
BTBPP, BTSAP and BTFTP modules
OEM QVGA packages repository:
Cab QVGA packages repository:
Tweaked cab QVGA packages repository:
Here I reserve a space to post apps that are optimized for SD install.
There are three ways of doing it:
1. Use mortscript to install on the SD Card. Sashimi great tool does so. In the mortscript source compendium you can also find a script that does it more manually (may fail on some devices/cabs). I never have time to "steal" the code from sashimi's. It is as simple as leaving the cab file in a certain folder. the drawback is sashimi's is kinda slow to launch because it does a LOT of things. btw, great tool to backup emails, wifi and so on.
2. Use sktools: it lets you move files (including dll) to the sd card and is able to create a cab version that saves the installation configuration (sd installation, registry changes, dll moved, etc). Very easy but cabs created can not be opened by all other cab editing apps.
3. Use Wince cab manager. It is more tedious.
At the end I will post here some of these files/links for everybody to enjoy
Esmertec Jbed Install on SD (by K0mmaT1A)
Office 2007 Install on SD
Command line tools
Howdykeith's list in his great mortscript compendium thread Quite a few toos that accept command line options so can be launched by a link, a script (mort or not) or whatever...
Tools to Sync Time (requiere internet connection):
SKTSync has command line options
TimeSyncTZ: has command line options
Splash Screens:
ROM enhancements:
Please feel free to report those scripts, tweaks or whatever making your ROM or User customization better and different from other proposals.
Customize security policies,... and for a complete reference this great itsme post
Customize Splash Screen Yet another method
Customize welcome screen
Remove Beta Expiry Date from Today Screen
Change ROM Info in settings/Device info (provxml) and Change the name in the bootscreen and build date of the rom (EVK)
Change calendar working hours
Change calendar working days
Wiki BT profiles
Mr Makk post (60 guides): Brief and clear guides for most common things.
Provxml, Reg files and Parameters backup:
Please feel free to report how you backup email, wifi, bt, owner, etc. as provxml / xml / reg files ready to load while flashing or customizing.
How to delete reg keys with a provxml/xml file
How to delete reg keys with a reg file
Rapiconfig: use this small app to download settings you want to backup as provxml
Backup Owner, Wifi, mail as provxml using rapiconfig
Love .PROVXML's? Hate Not Knowing If It Worked? [URL="http://forum.xda-developers.com/member.php?u=1505670"](by hilaireg)[/URL]
Keep media player running when the screen goes off
Fix Igo keyboard problem with ezinput Has nothing to do with the topic but I wanted it to be handy...
Ervius rgu/reg to xml/provxml conversion
Customization:
Notepad++
Gimp (GNU Image manipulation software, "like" photoshop but freeware)
Creating Shortcuts
Icon dll creation: tutorial with links to iconfx and reshacker
XmlGui 0.0.5.1 - Tool for editing HTC Xml layout file: useful for customizing HTC XML skinned apps.
Using mortscript to cook provxml files with shortcuts and icons
There are several ways to customize the ROM:
1- RunCC: nice looking, can not be interrupted (if so is like a hard reset). Sometimes is tricky while cooking.
2- XDA_UC: mortscript based, has full support for tradicional UC config files (no need to install SDconfig). Can run in combination with RunCC or standalone. Has lots of functionalities for the cooker to create shortcuts, load regkeys, etc. but also for the ROM user (install cabs, xml or reg files, etc while you are using the ppc).
3- SDConfig: You can change bmp displayed as the customization takes place. Can be aborted.
I use 1+2 combined. I basically use XDA_UC to do the customization and control the Radio after first boot and I use RunCC to ensure the customization is not aborted.
Android:
Pending
As always thanks to pcarvalho for showing all our polaris can work with the latest builds and to gullum, the first one to share a stable and easy wm6.5 kitchen (and of course to all the people who developed and shared hardspl, customruu, cooking tools etc, releases, etc. but that would be endless)
Polaris chef's corner (POLA100) - Non solved questions
reserved for future
Polaris chef's corner (POLA100) - Non solved questions
reserved for future use
reserved for future
reserved for future
Polaris chef's corner (POLA100) - Non solved questions
In this second post I will try to gather direct questions on how to do something specific. It can not be something like how do I install wm6.5 on my wm6,1 device or how can I cook a ROM. Answers should not be I have read that or that but rather I do it this way and it works. Let me put some examples:
- How can I make top bar / softkeybar transparent with wm6.5 (I am not talking about a top bar simulating the wallpaper, but a transparent one)
- How can I sync time automatically first time radio is connected without wifi or activesync? There are many apps out there that sync time through a data connection but can it be done automatically with cell tower information or gps?
- I have to blips (short sounds) when the welcome screen pops up. How can I avoid the second blip?
- How you cook the connectionsetup ? can the files be in sd card and tell connectionsetup with the corresponding reg key?
- Where and how are bt profiles stored?
- Can I use roms from other devices? and other devices can use polaris roms?
- How can I associate apps with file explorer and resco explorer (eg. txt file with notepad, mscr with notepad, etc).
- How can I bachup and restore my bt pairings (with xml or reg)
- Which splash tool to use so I do not get a black band in the bottom, where the red letters appear?
wow...very good idea....thanks
and the first link...rollup 23549 with all lang files
[email protected] said:
wow...very good idea....thanks
and the first link...rollup 23549 with all lang files
Click to expand...
Click to collapse
Glad you like the idea. Can you elaborate a little more? what's the difference with the other Duron23 thread you mentioned another day? How do you handle the sources taken from one or the other page? If we document a little we may see more pleople daring to try...
cruiserrr said:
Glad you like the idea. Can you elaborate a little more? what's the difference with the other Duron23 thread you mentioned another day? How do you handle the sources taken from one or the other page? If we document a little we may see more pleople daring to try...
Click to expand...
Click to collapse
Duron´s thread is very good because recmoded files and tips but only english
->also good is Da_G`s latest release thread...very big thread...in this thread Da_G post releases (complete rollups) and other people too and special tips
http://forum.xda-developers.com/showthread.php?t=544445
->and new...Htc Pedia (also complete rollups)->but you need to be a member for download..free
http://htcpedia.com/soft/build-release.html
for sort..use dump sorter you posted...
PS: yes..i like this new thread from you
edit: more sites: XBeta...DarkForcesteam
and more kitchens
PDAViet´s EVK
http://www.pdaviet.net/showthread.php?73864-KITCHEN-ROM-WM6-5-CHO-POLARIS-VỚI-MANILA-2-0
->Part1 : http://www.4shared.com/file/149890447/ce0ee71d/Polaris_Kitchenpart1.html
->Part2 : http://www.4shared.com/file/149897769/84112e78/Polaris_Kitchenpart2.html
->Part3 : http://www.4shared.com/file/149902303/c40589da/Polaris_Kitchenpart3.html
Pass: TranMinhMan
And: TomAngel´s (OSKitchen->nk wm6.5)
http://forum.xda-developers.com/showthread.php?t=643535
Alex, try the link with the batch recmoder in post 1. It worked at first try for me. You simply define the absolute path,name and ext of the files to recmod in the txt file and drop the file over the batchrecmoder.exe and it does the job (windows vista here)
cruiserrr said:
- How you cook the connectionsetup ? can the files be in sd card and tell connectionsetup with the corresponding reg key?
- anybody has an oem/ext/cab quickgps that does not give the empty page error and has white letters and dark wallpaper?
Click to expand...
Click to collapse
About conection setup - i look in registery and find only this reg keys
[HKEY_CURRENT_USER\Software\HTC\ConnectionSetup]
"provision"="\\windows\\"
[HKEY_CURRENT_USER\Software\HTC\ConnectionSetup]
"provision"="\\windows\\"
cant test it now,
and about quickgps i think its use system defaut color for text (exemple sms input box) can edited on theme file.
cruiserrr said:
Alex, try the link with the batch recmoder in post 1. It worked at first try for me. You simply define the absolute path,name and ext of the files to recmod in the txt file and drop the file over the batchrecmoder.exe and it does the job (windows vista here)
Click to expand...
Click to collapse
thanks..i will try... in the past i try another one...but it was not working...
edit: have anyone working bluetooth sap profile files for eg. VW (Volkswagen) Premium Bluetooth...a user from my german rom ask for that...??
My bluetooh works great with bt headset (handsfree) but this is a special option for eg. phonebook displays in the car
[email protected] said:
thanks..i will try... in the past i try another one...but it was not working...
edit: have anyone working bluetooth sap profile files for eg. VW (Volkswagen) Premium Bluetooth...a user from my german rom ask for that...??
My bluetooh works great with bt headset (handsfree) but this is a special option for eg. phonebook displays in the car
Click to expand...
Click to collapse
Where are those files suposed to be so I can check? I am not familiar since I have been using for a long time Jetware BT extension and it works great with my Parrot. It is great if you have thousands of records and many categories since you can tell which categories to sync so it does not take a long time. I always include it in my roms and its open code.
cruiserrr said:
Where are those files suposed to be so I can check? I am not familiar since I have been using for a long time Jetware BT extension and it works great with my Parrot. It is great if you have thousands of records and many categories since you can tell which categories to sync so it does not take a long time. I always include it in my roms and its open code.
Click to expand...
Click to collapse
Thanks for the answer...I have also wrote to Olioaglio....he will send me a cab of original bt sap files...so i wait and will see
but thanks for the tip with jetware
[email protected] said:
Thanks for the answer...I have also wrote to Olioaglio....he will send me a cab of original bt sap files...so i wait and will see
but thanks for the tip with jetware
Click to expand...
Click to collapse
I checked your german's rom posts. In case it helps, I have BTBPP, BTSAP and BTFTP as EXT modules and they seem to work. However I have them disabled since my BT connects to the carkit without any popus (only 1st time when building the association). In bt profiles (settings) I jave a2dp, hsp, hpf 1.5 (hands free profile), pan, hid, opp, bpp, avrcp, pbab (phonebool access profile), spp, sdap profiles.
cruiserrr said:
I checked your german's rom posts. In case it helps, I have BTBPP, BTSAP and BTFTP as EXT modules and they seem to work. However I have them disabled since my BT connects to the carkit without any popus (only 1st time when building the association). In bt profiles (settings) I jave a2dp, hsp, hpf 1.5 (hands free profile), pan, hid, opp, bpp, avrcp, pbab (phonebool access profile), spp, sdap profiles.
Click to expand...
Click to collapse
Can you share it....pleeeeaase....!!?! (if you want you can send it also in a mail [email protected]) Thanks
[email protected] said:
Can you share it....pleeeeaase....!!?! (if you want you can send it also in a mail [email protected]) Thanks
Click to expand...
Click to collapse
Alexander, here are the ext bt modules. As I said I currently have them disable. Regarding the profiles, I would be happy to share them but do not know how they are stored (files, reg file, xml file?). If you know how to locate and share let me now.
cruiserrr said:
Alexander, here are the ext bt modules. As I said I currently have them disable. Regarding the profiles, I would be happy to share them but do not know how they are stored (files, reg file, xml file?). If you know how to locate and share let me now.
Click to expand...
Click to collapse
first...thanks...i let you know if i find it....also interesting is this thread:
http://forum.xda-developers.com/showthread.php?t=382263
I was browsing the internet but did not find how the profiles are stored. I found a nice webpage describing all the btprofiles, will add to 1st post.
cruiserrr said:
In this second post I will try to gather direct questions on how to do something specific. It can not be something like how do I install wm6.5 on my wm6,1 device or how can I cook a ROM. Answers should not be I have read that or that but rather I do it this way and it works. Let me put some examples:
- How can I make top bar / softkeybar transparent with wm6.5
- How can I sync time automatically first time radio is connected without wifi or activesync?
- I have to blipgs when the welcome screen pops up. How can I avoid the second blip?
- How you cook the connectionsetup ? can the files be in sd card and tell connectionsetup with the corresponding reg key?
- anybody has an oem/ext/cab quickgps that does not give the empty page error and has white letters and dark wallpaper?
Click to expand...
Click to collapse
hummm...is this section for me?
gonna have to get some time to answer some of those...
ill start with the last one for now...answer: hack the exe (or just "steal" it from my rom - easier this way )...mine has white letters and dark wall...
meanwhile here is another (on mine it's okay btw): why do most cooked roms fail/stop to play music when device screen is turned off? its not wm6.5 related that much i know, but i dont know what you lot did to break this feature...
cheers
ps: what are blipgs/blip's? lost me there
Hii
i have questions please hope i find my answer here i'm sure from that
1- how to make a custom ROM with spb theme
i mean how to cook the SPB theme with my ROM by SPB 3.5
2- i want to change the official theme of SPB to Hero Theme but how to make that when i'm the cookers here :S
3- how to make the spb theme after cooking is the first theme for the boot for my ROM
i mean delete all the themes and make the spb theme is the booter theme
hope anyone help me
and thanx again guys
and sorry for my English
HaKiM
SPB is a 3rd party app which you need to purchase. XDA does not allow warez in any shape or forum whether you are requesting or providing it.
Consider this 1st and last warning on this matter
EDIT
I notice you have edited first post and removed warez request & my comments
ok man i will buy it but how to cook it with my ROm after buying it man ??? please if you know can u make a reply by the way thanx so much
It's like cooking anything else in: install it, grab all the files and registry keys, then put them in an EXT. Try to get it to work straight out of \windows (possibly change registry key paths and shortcut paths); if that doesn't work, then you need to send the files to their own directory.
and if it has setup.dll in the cab you CAN compare the registry before and after installing the cab by sktarcker or ceregedit and export it in the App.reg
it's Not easy to do this , YOU SHOULD WORK ON IT !!!
and some times setup.dll removes and rename some files
BTW : Warez app , Requests , releases are Not Allowed in most Forums
cheers
sameh_elhakim said:
Hii
i have questions please hope i find my answer here i'm sure from that
1- how to make a custom ROM with spb theme
i mean how to cook the SPB theme with my ROM by SPB 3.5
2- i want to change the official theme of SPB to Hero Theme but how to make that when i'm the cookers here :S
3- how to make the spb theme after cooking is the first theme for the boot for my ROM
i mean delete all the themes and make the spb theme is the booter theme
hope anyone help me
and thanx again guys
and sorry for my English
HaKiM
Click to expand...
Click to collapse
If you just want to cook this in for personal use or even the trial that's fine. Nobody can impose restrictions on that.
The way I did it is I dumped the cab to an OEM using the CAB2OEM tool floating around XDA (search for it by name).
Add it the resulting OEM to your kitchen like you would any other regular OEM package.
If you'd like to also cook in all your customizations... export the SPB Mobile Shell 2 registry key that gets created after you install SPB.
Good luck...
p.s. I looked at the original post and you did ask where to get the "final SPB cracked" version. We don't allow that here (warez or warez requests) and please leave the moderator edits in place next time you edit your post. Thank you!
NRGZ28 said:
If you just want to cook this in for personal use or even the trial that's fine. Nobody can impose restrictions on that.
The way I did it is I dumped the cab to an OEM using the CAB2OEM tool floating around XDA (search for it by name).
Add it the resulting OEM to your kitchen like you would any other regular OEM package.
If you'd like to also cook in all your customizations... export the SPB Mobile Shell 2 registry key that gets created after you install SPB.
Good luck...
Click to expand...
Click to collapse
thank you so much for this information
but i have a problem with how to export the reg key from phm reg.
and use it in cooking
2nd - how to change the theme from the official like i said hero theme or htc style
3rd- how to make it is the first theme boot cuz i have to load the rom on my omnia and after sign in i have to press on spb theme button but i want to make it the default
thanx again
If you wanna take the easy way out, you can use my EXT package as a base for customizing:
http://www.mobileunderground.info/indagroove/SpbMobileShell3.5.zip
indagroove said:
If you wanna take the easy way out, you can use my EXT package as a base for customizing:
Click to expand...
Click to collapse
thank you so much for your ext package i will make a compare between the package i have and yours and i will see if i had any problem in my package after your permission thanx man
FYI, I should have mentioned my package is for WVGA devices.
[29OCT] osKitchen GhostXSeries EURO&TMOUS Cook your own ROM for all chiefs Ver 9.5.0
Why settle for other peoples roms! Can you find one that is exactly the way you want it? Download my osKitchen and build your own rom from scratch with the packages and look you want!
My kitchen is easy to use and is built on stock look so you can customise it the way you want to!
I am more than happy for you to build roms from it and even upload to XDA. If you do all I ask is that you mention me in your thread for using my kitchen. If you download my builds, I do not accept donations but please press the thanks button!
29th October 2011 - Version 9.5.0
Full download Here: - Mirror provided by poyensa
poyensa's Build Full download Here:
Patchs & updatespost #2
Useful Hints and Tips in post #3
Click to expand...
Click to collapse
Video demonstration of osKitchen build ver 6.5
Some Roms that have been built using my Kitchen build!
GuzuGuzu 6.5.5 ROM with CHT 2.0 thread here:
poyensa 6.5.5 ROM with CHT 2.0 thread here:
ShiftPDA 6.5.5 ROM thread here:
Kefir.net 6.1 ROM thread here: - The first WM6.1 ROM for the HD2!
NinoFR a French trasnlation of my osKitchen - Download here:
Click to expand...
Click to collapse
The details of the kitchen are as follows:
Kitchen Details WWE
RAM: 576
OSKitchen Zero: 1.33.5
Base Image: Tweaked RUU_Leo_1_5_TMOUS_3.14.531.0 completly new base!
OS: 21913 and 23193 - NEW! - Both OS tweaked by me!
Sense: 2018 & 2021
XDA_UC Compatable!
Office 2010
Facebook 1.1.0.26
Cookie Home Tab 2.0
Opera version 10
PPCPimBackup
Click to expand...
Click to collapse
Change Log
Version 9.5.0
Sense 2021 - Some minor tweaks
Fixed all leds so now they flash untill you go in and clear the alert! Not even availble on standard roms!
Fixed Internet Sharing (Hopefully!)
Some other minor tweaks
Click to expand...
Click to collapse
Beta Testing team!
GhostXSeries
GuzuGuzu
poyensa
ShiftPDA
Click to expand...
Click to collapse
Disclaimer
I will try to help you out with issues if I can, but I will not take any responsibility for faults with your device!
This will be reserved for minor updates to the kithcen - This means you will be able to download the updates directly instead of having to donwnload the full kitchen each time.
9.0.0 11/10/2011 updates
View attachment 746595 Wifi router sharing
9.0.0 12/10/2011 updates
View attachment Backlight.zip Enable backlight
Tools:
View attachment LeoAdvancedRUU.zip Leo Advanced Updated utility. Thread here: All credit goes to Barin for creating the app and to HD2Owner for the thread!
Useful notes:
How to add a cab file as a package in your build!
First make sure you have the files you need with a .cab extension. This is the easiest way to do this. Drop the files into a location eg desktop.
.Open osKitchen go to Import
.Select button for cab installer file
.Press Browse and select the .cab file from the desktop
.Under Device Drop down select HTC Leo
.Uder Group select an existing group eg 04 Software, or if you want to create your own group type in the name here
.Under Name type in what you want to call Ext package
.Press Convert
You will then see a window with Operation completed press Ok
Close the windows and go into Ext packages and select the newly installed package!
Change Logs
Version 9.0.0
Sense 2021 - Fixed Sense restart issue now works with 3rd part apps
Changed multiple reg keys to make sense more stable
Fixed IE colour issue with os 23153
Added option to hide or show the operator text in the top curtian
Able to edit the top bar and bottom bar to match wallpaper
Some other minor tweaks
Version 8.5.0
New OS 6.5.3 23153
Fixed bottom buttons on 6.5.3
Added SDKCert
Some other minor tweaks
Ultrashot driver fix for bold font replaces gwes.exe
Version 8.0.0
New kitchen built from scratch!
New base used. I have now used base rom RUU_Leo_1_5_TMOUS_3.14.531.0 rather than trying to merge different bases together.
FM Radio fixed!
Weather animations on home screen Fixed!
Sense 2021, now you can see the operator carrier at the top of the screen.
Version 7.5.0
Sense 2021
Fixed restarting issues with third party apps thanks to Poyensa
Tweaks
Fixed security policy now you can install HTC hotfixes!!
Other minor fixes
Also please test in the people tab: all people-update & events tab - seems to be stable for me, but please test!
Trimed.......
Wonderful, thank you so much for this release. I'll get cracking on adding the things i wanted to this build and let you know how i get along. Do you want a copy of the updated Copilot cab to add to your builds?
Just in case
@GhostXSeries : Sent you PM on robotic voice.
Btw why are you on such old build for WM 6.5 ?
I wanted to give the option of upgrading the orgional builds so chiefs can have a choice. It was purely an exercise for me to see if it could be upgraded to the 576mb with office 2010 and .net etc.
I also had the phone on stand by with hspda last night and if my battery is right it dropped about 4 percent!!!!!!!
576mb android compatable kitchen now available for download
Thank you very much but now I still cant test your ROM Your link is very slow (
Please upload on megaupload.com, hotfile.com, mediafire.com, multiupload.com,...
Thanks
Sorry I am only going to be storing the images on VBN from now on. It is too much work to upload to multiple sites.
Downloading the Android compatible rom now, looking forward to finally having a nice, close to stock Rom that works smooth.
Keep up the great work.
gaiden0000 said:
Downloading the Android compatible rom now, looking forward to finally having a nice, close to stock Rom that works smooth.
Keep up the great work.
Click to expand...
Click to collapse
I am currently working on a sense 2018 version that is also Android compatable. This will be up in the next couple of days. I have got sense working on the build I am just simply trying to modify the base build to tweak it a bit. I will hopefully have a mixture of tmobile 2.10, 2.14 and leo 1.66
Kitchen build has now got Sense 2018! As far as I can tell this is the first Kitchen to be released with Sense 2018 included
Hmm.. tried your kitchen, but (knowing not much about kitchens...) tried to find a project file (.kxml file) to load, but can't find it.
Can it be you missed that one? Or do I have to set up my own?
(e.g. an example ROM would be great)
One question: When the ROM is very small (eg. removed Windows Live and Office) will the memory for data storage be any larger?
one more.. Some imageinfo.bin files are read only. This gives an error when building (because the file cannot be overwritten) Is this ok or an error?
Bright.Light said:
Hmm.. tried your kitchen, but (knowing not much about kitchens...) tried to find a project file (.kxml file) to load, but can't find it.
Can it be you missed that one? Or do I have to set up my own?
(e.g. an example ROM would be great)
One question: When the ROM is very small (eg. removed Windows Live and Office) will the memory for data storage be any larger?
one more.. Some imageinfo.bin files are read only. This gives an error when building (because the file cannot be overwritten) Is this ok or an error?
Click to expand...
Click to collapse
It is very easy to built your own project files. Simply select the operating system on the first screen eg os 21869 (WM 6.5) or 23569 (WM 6.5.5) then when you go into the ext packages screen simply select the packages for the operating system eg:
If you select 21869 then select
01 HTC Packages - This is the list of the main packages
02 Sense 2018 fixes if you want to remove the rss feader,
03 23569 fixes - Do not select this - only use this for OS 23569
04 Tweaks - You can select what you want from this
05 Software - You can add what you want into this folder extra programs etc
If you select the 23569 OS remember to go into Sys Packages and select everything for beginers, and select 03 23569 fixes. This folder updates things like the dial pad and the keyboard etc.
I simply tried to keep the Kitchen rar file as small as possible!
For the read only error, simply right click on the osKitchen folder, go to properties and uncheck an read only check boxes! Sorry about that I kinda forgot the check the permissions on the folder before I uploaded it
GhostXSeries said:
For the read only error, simply right click on the osKitchen folder, go to properties and uncheck an read only check boxes! Sorry about that I kinda forgot the check the permissions on the folder before I uploaded it
Click to expand...
Click to collapse
Already did - thanks.
I want to remove Sense altogether, also I don't use Office (using a better office suite)
Is it also UC capable? (And, could you please answer my question about the memory gain when the ROM has less packages in it?)
Bright.Light said:
Already did - thanks.
I want to remove Sense altogether, also I don't use Office (using a better office suite)
Is it also UC capable? (And, could you please answer my question about the memory gain when the ROM has less packages in it?)
Click to expand...
Click to collapse
Memory will be better the less packages you remove. If you dont want sense, you can simply de-select all the manila packages and the start icon loader package as well. It is not currently UC compatable, I have not done much work with this yet, but you should be able to download the cab files and add them in to the package.
What other versions of office are you using?
Just wanted to write back to say that I've been cooking away using your kitchen build and it's got to be one of the best one's I've used. I'm so close to perfecting my own Rom and it's all thanks to you.
Have you tried including the Chainfire 3D drivers? When I've tried it's not gone right (this isn't a problem with your kitchen, as i think it's an issue with OSkitchen and the 3D drivers from what i've been reading). Thanks again for this.
Greetings!
First off, I have little idea what I'm doing, this is my first attempt to create a custom ROM. I've searched around and can't seem to find a solution.
I've got an Xperia X1 and am using osKitchen.
The ultimate goal is to have a Japanese ROM with WM build 25369 with no additional UIs, i never use sense or whatever anyway, just the old today screen with cal, messaging, and time/date items.
I have:
Latest stock ROM for X1 (GENERIC_NAM_R3AA011)
23569_MSXIPKernel_SYS_QVGA_WQVGA_VGA_WVGA_0409 (Just Eng)
initflashfiles-dat-all-langs-updated-feb-24-2010.zip
RUU_Diamond_eMobile_JPN_1.81.881.2_Radio_Signed_Diamond_52.48.25.26_1.09.25.07_Ship.exe (6.1 JPN ROM)
Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65.zip
WM6550-23563-Rollup-All-Pkgs.rar (This has all languages)
Here's what I'm doing, anyone of them (or all) could be very wrong, hopefully I've done at least one thing right:
Imported X1 ROM for OEMDrivers, OEMApps, OEMOperators, oemversion, oem_dpi
Imported 6.1 JPN ROM for OEM Lang 411
-What i did here is i copied everything over from the JPN rom's oem 411 folder into the X1 OEM Lang folder, overwrote any conflicts, deleted any 0409 muis, and copied over the file from initflashfiles zip for 0411.
Replaced OEMXipKernel with the one from Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65.zip and selected custom XIP when making the rom with the one also found in that zip. Put the rest of the files (os.nb.payload, xip.bin, uldr.nb0, romhdr.bin) into the ROM Parts folder.
Then, I Used OS, OSFiles, MSXIPKernel, MSXIPKernelLTK from the 23569_MSXIPKernel_SYS_QVGA_WQVGA_VGA_WVGA_0409 zip, and the rest of the packages i used from the WM6550-23563-Rollup-All-Pkgs rar (because it had 0411 files).
I deleted dpi and lang folders that my device doesn't use (it uses 192dpi 480x800 and 0411) and built the ROM, flashed, and it shows the Sony Ericsson splash screen, and then goes black forever.
I know I must be doing something very wrong, any hints as to what?
Thanks
Pfff, what a big list,
Okay I did it this way, and I make my rom in 12 languages and they are all working.
1. Install oskitchen and import xperia rom
2. After finishing import 23563 build
3. Install another oskitchen and import diamond jpn rom
4. Copy the oem_lang 0411 and the ext packages to your kovsky kitchen be aware you put them in the right place.
5. Open the kovsky kitchen and select the Japanese language and select the packages you wanna use in your rom and you're done.
Regards,
Cool thanks!
That would be for 23563 though right? What if i wanted to use 23569 with 23563 packages? ....No real reason, higher number, figure it's better somehow....that even possible?
nemasu said:
Cool thanks!
That would be for 23563 though right? What if i wanted to use 23569 with 23563 packages? ....No real reason, higher number, figure it's better somehow....that even possible?
Click to expand...
Click to collapse
Just start with 23563, it's a good package and if you have a working rom you can alway's make the change.
Greetz,
Rataplan said:
Just start with 23563, it's a good package and if you have a working rom you can alway's make the change.
Greetz,
Click to expand...
Click to collapse
Ok sounds good, I was just thinking I probably shoulda tried with something a bit easier haha.....how would i make the change? is my approach correct?
nemasu said:
Ok sounds good, I was just thinking I probably shoulda tried with something a bit easier haha.....how would i make the change? is my approach correct?
Click to expand...
Click to collapse
If you extract the 23569 build, you only have to change the All and Common folder, but in your first post you where talking about a 25369 build and I didn't know what kind off build that was.
Succes buddy,
Make sure you have the proper wince.nls in your build. If you leave it out, the rom won't boot.
Farmer Ted said:
Make sure you have the proper wince.nls in your build. If you leave it out, the rom won't boot.
Click to expand...
Click to collapse
I used the one that came with the Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65 zip.
nemasu said:
I used the one that came with the Kovsky-xip-bin-oemxipkernel-nk-exe-native-WM65 zip.
Click to expand...
Click to collapse
I don't think there is any difference between those 2 wince.nls but if you wanna be sure just use the one in the 23563/COMMON folder.
Rataplan said:
I don't think there is any difference between those 2 wince.nls but if you wanna be sure just use the one in the 23563/COMMON folder.
Click to expand...
Click to collapse
Hmm, I've got a wince.nls in:
Sources\Devices\HTC Kovsky\Profiles\default\OEMXipKernel
Sources\Windows Mobile Builds\23569\0411\WinCENLS_Lang_0411
and
Sources\Windows Mobile Builds\23569\Common\WinCENLS_WWE
they are all different sizes....should they all be the same? or only have one? or?
nemasu said:
Hmm, I've got a wince.nls in:
Sources\Devices\HTC Kovsky\Profiles\default\OEMXipKernel
Sources\Windows Mobile Builds\23569\0411\WinCENLS_Lang_0411
and
Sources\Windows Mobile Builds\23569\Common\WinCENLS_WWE
they are all different sizes....should they all be the same? or only have one? or?
Click to expand...
Click to collapse
No I have them also, never take a look at it, only checked the file when I cooked my rom's never changed anything or replaced it with another version or from another build.