Database Users

Niki touch screen not working when slider is open

Anyone here experiencing the same problem? At first I thought that was normal, but at some point the touch screen worked while the slider was open and I was really happy with it but now, it no longer works what gives?

am i the only one experiencing this? do you think a ROM upgrade can fix this?

Sometimes (very rarely) the screen doesnt come on and I have to reset, but nothing like you descrived, sorry...

aw! i guess i have an isolated case. thanks twolf!

it's a screen cable problem. just fix it

last week, i had the same proplem. So i sent it to the guarantee service. They replaced the cable, which is connecting the screen with mainboard.

too bad my phone doesn't come with warranty. thanks for the info guys

my phone has the same problem,and I had used many roms, and all of them have the same problem.

my screen isen't working when the keybord is closed,
aneybody have the same problem??

problem
yes i do have the same problem ... my htc niki100 was not working when slide closed ... but when i open it works fine .... sometimes when slide open also it is not working i mean the touch screen ... i removed all parts of my htc niki and i take a look at that but all was fine and i dont know what was the probelm... i think htc failure model is niki... really pissd off guys due to this niki ... if any came to know how to make work that ... just post it and for u i am thankuful..

it is hardware problem. sent my device to service center and they changed the board for free since it is still under warranty. they said it was wear and tear. so it is only matter of time before the new board suffers from wearing out again. unless stop using the sliding keyboard, but tat's the main selling point touch dual is built for =\

how much is the cable $$ connecting the lcd to the boarD?
my niki is out of warranty............can any mobile phone repair shop fix it ?

yawn said:
it is hardware problem. sent my device to service center and they changed the board for free since it is still under warranty. they said it was wear and tear. so it is only matter of time before the new board suffers from wearing out again. unless stop using the sliding keyboard, but tat's the main selling point touch dual is built for =\
Click to expand...
Click to collapse
If you google around you'll see this is quite a common complaint with the Touch Dual. There seems to be a certain flaw with the screen and cable which was never addressed. I had the exact same problem & eventually sent the phone back to HTC to be fixed.
Be warned though - HTC would not fix my phone eventhough it was still under warranty. They said the problem was due to User Mis-Use. My ass it was. I argued it out with them but in the end I just paid the UK£60 to get it fixed - robbing bastards!

You all seem to think it's a hardware issue, and I'm experiencing the same issue, but only under Windows Mobile (I've tried both 6.1 and 6.5 - all sorts of various roms). Android on the other hand, works fine. :/
EDIT:
Well now it's working on Windows too. After I ran Android... SO GIVE THAT A SHOT I GUESS. o.o

Hi
I've got the same problem it's starting to piss me off.. :[email protected]
1) screen doesn't work when slider is opened
2) screen doesn't work at all at times but works again after ....??? xx hours or so.
My warranty has ended, any tips?
Upgraded Windows Mobile to official WM6.1 from HTC.com website.

DrOni(on) said:
You all seem to think it's a hardware issue, and I'm experiencing the same issue, but only under Windows Mobile (I've tried both 6.1 and 6.5 - all sorts of various roms). Android on the other hand, works fine. :/
EDIT:
Well now it's working on Windows too. After I ran Android... SO GIVE THAT A SHOT I GUESS. o.o
Click to expand...
Click to collapse
i came in here to say the same thing.. weird. works fine in android.............

another thing worth noting is that if you keep a finger on the screen while sliding it seems to work everytime

My Niki has the same problem, when slide is open i cannot use the "send" button on the touch screen - so i have to close the slide, to send a SMS.
I bought a HTC Snap now, so my NIKI just lies in the drawer...
Sad, i like the Screen resolution and Rom software on the Niki better than the HTC Snap.
At http://www.ppctechs.com/HTC-Nike_1047/repairs.htm you can buy a HTC Nike ToolKit with special screwdrivers, maybe the cable just needs to be aligned properly, or fixed in a socket...
Has anyone tried to fix it themselves?

guys,
I had the same problem. In fact, my touch screen was totally not working at all. Some threat recon it's loosen cable so i opened my touch dual and tighten the lcd flex cable. It worked after that, but not working when slide is open. I've just changed the flex cable myself and it's working fine now. hope this help.

xiufoong said:
guys,
I had the same problem. In fact, my touch screen was totally not working at all. Some threat recon it's loosen cable so i opened my touch dual and tighten the lcd flex cable. It worked after that, but not working when slide is open. I've just changed the flex cable myself and it's working fine now. hope this help.
Click to expand...
Click to collapse
could you guide me how to fix it? I'm having this problem as well.
Do you have any kind of link as to how to open the niki, screws, cable, where to look etc...?
thanks!

Digitizer replacement?

The warranty for my HD is gone and I would probably need to change the touch screen digitizer myself, found these on ebay for ~60€, but does anyone know how to change them? Again, any help would be appreciated!
Originally:
HTC Touch HD, it has been a wonderful phone until now. I have encountered a wierd problem with the touchscreen.
First the touchscreen stopped working completely, after awhile it suddenly started working, at first it recognized some bits and pieces but now it recognizes every touch as normal, except..
It is very inaccurate and the "sum of inaccurity" seems to change depending on where I push the screen, the screen alignment option in settings does not fix this.
I recorded two videos to show this problem better:
http://www.youtube.com/watch?v=Xd1vjiHr2QU
http://www.youtube.com/watch?v=TynTTFIQJv8
Any help would be appreciated on how to fix this!

looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~

spzero said:
looks broken id return under warrenty did it get any knocks / drops? do you have insurance?~
Click to expand...
Click to collapse
I have handled it with great care so no big knocks or drops. Ill contact the store about the warranty. Just wondered if theres a way how to simply fix this.
Just noticed, the screen works normally sometimes for one touch, then it goes back to the inaccurate **** :/
Im now guessing that some cable could be loose or something like that?

Have u tried recalibrating the screen? I can't remember exactly where I found it, but its in programs or settings somewhere.

Viba said:
...the screen alignment option in settings does not fix this...
Click to expand...
Click to collapse
Yes I have..
Anyway I RMA'd it now. Hope I get a new one

I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<

Seems a little unfair if they don't seeing as the HD is purely touch screen!

SomethingWicked said:
I can tell you from previous experience, HTC does NOT warranty touch screens. You mentioned "a store", so I hope they help you, because HTC will not. >sigh<
Click to expand...
Click to collapse
Hmmh, well the store probably sends it to some service center here in Finland that fixes HTC phones.
Indeed sounds very stupid if the warranty doesnt cover the touchscreen.
Perhaps my HD suffered from something else than a broken touchscreen, eg. mainboard or a chip that controls the touch screen. Who knows I'm just hoping it "passes" the warranty :|

Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.

I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.

drabisan said:
I have dismantle my HD to see if there's any way to change only the screen (it's broken)
There's no way, as far as I saw. You have to replace LCD, tourch screen and screen. It's one piece and there's no way easy way to open it without break it.
You can find all of them for about 200E.
Click to expand...
Click to collapse
So there's no way I could replace only this?
http://global.ebay.com/Original_Digitizer_Touch_Screen_For_HTC_Touch_HD/310124432320/item

Another sad story // hopefully with a good ending
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well.
All of a sudden, I started having problems with the touch screen of the Touch HD. I started noticing that whenever I touched the Touchflo buttons, the phone vibrated. Soon I came to realize the if I touched in some spot, the phone recognized that I was touching lower, to the point that it could not recognize touches in the taskbar, for instance.
The united has 2 or 3 months max. It had some falls before and I do not really know who (or which one) was the culprit.
Tried this as fix: re-alignment, hardresets, Official ROM upgrade. Then I started reading and understanding that the problem was probably the digitizer ("nice to meet you").
I live in Brazil and the Touch HD is not expected be released here any time soon. So the few HTC service centers do not know how to fix it and do not have parts for it. And also, I bought mine from an auction site by some user who bought it abroad, with no warranty whatsoever. I am left alone in this.
I was very frustrated and eager to get my device running again. So I started looking for a new digitizer and also the tools to open my phone. The digitizer (just the digitizer, not the LCD screen) I ordered from an ebay shop in Hong Kong on Monday and is expected to still arrive sometime in this century (IF Brazilian port authorities do not mess up). The tools arrived yesterday.
I downloaded the service manual and said to myself, let's see if the digitizer problem is maybe due to a loose flat cable. Got to work and carefully disassembled the device as per the service manual. (I have to say that, although I try to be carefull, I always scratch, bend or mess something up when I do jobs like these. So I was afraid of cracking some plastic or worse and actually did some.)
Up to where the service manual show, it went incredibly very well. But that's the problem. The service manual guides you to disassemble the unit up to the point where you are with the bezel, LCD and digitizer in one piece.
But hey! I saw zillions of internet shops selling the bezel (actually, the hole housing, but with no LCD), the digitizer or other parts separately! What is going on?
So I started trying to unmount the bezel, LCD and digitizer. Tried several things. It got really late. I was impactient. So I tried splitting the digitizer from the LCD, by inserting a hard plastic aluminium tip between the digitizer and the housing. A very thin plastic kind of tape came out (at lest part of it). So I tried doing it more. No success. And then I put a very thin screwdriver between then (just enough to get an ulgy bent it the plastic housing).
When I had played enough with that puzzle, I gave up and began mounting everything back. The good part is that I was able to get everything back and the phone is working. Well, except for the digitizer.
First thing I did was to kidnap the wife's Nokia E71 I bought her last month and she is not using yet (she couldn't learn to use yet; well, she hasn't even tried it), because I have to have mobile access to my emails.
And I really started now to consider other alternatives. Will some user like me EVER be able to change just the digitizer? Is it even possible? If it is, I would like to give it at least another shot.
But I am also afraid that it could be another part which is in failure. I just don't want to spend more $$$$ in this. It would be better to buy another phone (and maybe not a complete touchscreen - gosh, I miss my Tytn II). I so regret being a gadget freak and not waiting a release in my country.
Shoud I send my phone abroad for a service center repair? My sister lives in Dubai and she may be able to help.
Should I give up my unit and seel the used parts in ebay?
Hope to hear your suggestions. Thanks anyway.

Viba said:
Well... Had Hard-SPL on my touch hd and duttys 1.7 rom, so the warranty is gone
Didn't know they were so picky about it, they said it would cost 605€ to repair the screen. So now I should probably start looking for a screen digitizer on ebay and some help on how to change it... Already downloaded the service manual, but there was nothing on how to change the digitizer, could anyone here show me some light to this? Thanks.
Click to expand...
Click to collapse
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine

Rafael K said:
I kinda have the same problem as Viba and others. Sorry for the looong post. But decided to describe in more details my experience up to now, and hope you can help as well...
Click to expand...
Click to collapse
Nice to know I'm not alone with this problem
Sucks that the digitizer couldn't be removed separately, would help alot if someone knew how to do this, if even possible..
crashDebug said:
before doing this what about removing hspl and reflashing back a stock rom
change shop and you might, and i say MIGHT, be lucky
much better than screwing up the machine
Click to expand...
Click to collapse
I have already tried with 3 custom roms and 2 original SPL:s with two original roms.
The Finnish law allows me to get my HD replaced if I could prove that the custom rom didn't brake the digitizer. Already sent some emails to the local repairstation for HTC phones here in Finland, lets see...

I run a repair center (US). I have not gotten curious enough to take mine apart, but if someone has a dead one to experiment with, PM me.

Broken digitizer glass
I have the same problem with the digitizer glass being broken. I have had the back off the phone and stripped it back as far as I dare, but the service manual just doesn't tell you how to replace the digitizer and glass only. Checked out youtube where there are many videos with instructions on how to replace the screens and digitizers on lots of different phones as well as the iphone, just nothing on the Blackstone yet.
Any one else found a solution or decent instructions?

Today I disassembled my HD too, found a loose screen wire but nothing else. Even when I attached it properly the screen didn't work.
Has anyone found out how to change the digitizer?

some info
Hello,
I am also have HTC Touch HD, and I am also thinking about replacement of touch screen and housing because of scratches. Here instruction in Russian
http://www.pdacenter.ru/razborka/htc-touch-hd/
step 24 is not shown on the picture, but there is mentioned that in order to replace screen you should push it forward from back side of the screen; also mentioned that screen is fixed with double sided tape (probably it is fixed to the touch screen)
Also, did you try to use any polish to remove minor scratches on the touch screen? HTC Touch HS has resistive screen and probably may be polished (in contrast to capacitive touch screen that has some coating).
All the best

Also, about this problem see
http://forum.xda-developers.com/showthread.php?p=3911326

You guys should be smarter! If you want to warranty exchange it, flash the normal SPL again and flash a stock rom!

TD2 Touch screen failing

I had spot problems with TD2 touch screen from the beginning.
Now after a whole day of soft resets the screen is completly unresponsive.
Phone was 2 months old and I see, if not all, most of us had this problem.
I would know if/how many are so lucky they have a TD2 with still working touch screen.
If that's a common fault, people should know that phone is DoA and avoid buying it. At least not before an official statement from HTC where they admit the faults and declare the problem has been solved.

Could you be more specific with the issues? I've just bought a Topaz and would like to be able to access (though hopefully not contribute...!) to a list of testimonials to this failure.
A single place where we can notify HTC / service providers of the issue and how widespread it is would be extremely useful, especially considering the weight this community has with the company (Something tells me HTC are very interested in what people here say and do... It's the main reason why I went with an HTC / WinMob mobile phone).
Constructive comments only, though. "OMG AY HEYT HTC LULZ!!11 NOOBZ!1"-style flames achieve nothing.

using my topaz for about 3 months now....
no problems at all.

mannixita said:
I had spot problems with TD2 touch screen from the beginning.
Now after a whole day of soft resets the screen is completly unresponsive.
Phone was 2 months old and I see, if not all, most of us had this problem.
I would know if/how many are so lucky they have a TD2 with still working touch screen.
If that's a common fault, people should know that phone is DoA and avoid buying it. At least not before an official statement from HTC where they admit the faults and declare the problem has been solved.
Click to expand...
Click to collapse
could be the ROM youre using man, some of them have better screen responses better than others, have you tried recalibrating the screen, im using the 6.5 energy rom and i havent had any problems at all, usually the 6.1roms have better screen responses because they are the more stable builds, try flashing a different rom and see if that helps

mannixita said:
I had spot problems with TD2 touch screen from the beginning.
Now after a whole day of soft resets the screen is completly unresponsive.
Phone was 2 months old and I see, if not all, most of us had this problem.
I would know if/how many are so lucky they have a TD2 with still working touch screen.
If that's a common fault, people should know that phone is DoA and avoid buying it. At least not before an official statement from HTC where they admit the faults and declare the problem has been solved.
Click to expand...
Click to collapse
I had never any problems with my TD2 touch screen..
"...how many are so lucky they have a TD2 with still working touch screen" is very speculative approach..

Not a problem of ROM, I'm using out-of-the-box official 6.1.
First messages on forums I've seen the day I bought it where about failing touch screens... maybe it was a little bunch of phones at the beginning.
I hope so, I have to admit the radio really sucks, stilll better than my previous Artemis, but the phone was great.

Have you tried an updated radio rom?

mannixita said:
Not a problem of ROM, I'm using out-of-the-box official 6.1.
First messages on forums I've seen the day I bought it where about failing touch screens... maybe it was a little bunch of phones at the beginning.
I hope so, I have to admit the radio really sucks, stilll better than my previous Artemis, but the phone was great.
Click to expand...
Click to collapse
I agree with the the post below you may need to update your radio rom because I have noticed that when the radio jumps in and out of reception constantly that it effects the screen response time but I have never had problems with my touch screen with the exeption of on 6.5 rom, but go over to the topaz rom upgrading section and try and flash the most recent radio. And see if that helps a little

I've installed the updated radio ROM (3.49?) and official HTC updates only.
I blamed S2U2 because most of the time the touch screen stopped working after the slide unlock.
I had this problem occasionally from the very beginning, and was getting worst by time, but yesterday the touch screen was dead completly.
I really hope the service will fix it soon, got a Nokia today and it works much better as phone... but completly sucks for everything else

Reason4444 said:
"...how many are so lucky they have a TD2 with still working touch screen" is very speculative approach..
Click to expand...
Click to collapse
Ironic, till now it seems I'm the only one with a failed touch screen...

where do you get your information?
if its so widespread, it wouldve been on engadget or some other news portal
your poll is biased as well, you dont have this option: My phone is perfectly fine
seems as if just cuz your phone broke, you want to put down the diamond2
but ok , let's hear from the users, maybe you are right, and maybe we could benefit from this.
my td2 is perfectly fine..
another reason of why this happens is tf3d2 is stuck
at that point, you MIGHT only be able to open the taskmanager on the corner. nothing else responds cept MAYBE that and the power button

mine works fine

1xinfusion said:
where do you get your information?
if its so widespread, it wouldve been on engadget or some other news portal
your poll is biased as well, you dont have this option: My phone is perfectly fine
seems as if just cuz your phone broke, you want to put down the diamond2
but ok , let's hear from the users, maybe you are right, and maybe we could benefit from this.
my td2 is perfectly fine..
another reason of why this happens is tf3d2 is stuck
at that point, you MIGHT only be able to open the taskmanager on the corner. nothing else responds cept MAYBE that and the power button
Click to expand...
Click to collapse
Sorry for the late reply I had some health problems, my back screaming.
1) it was widespread when I bought the telephone. first place I checked was this forum whre I found a user blaming the touch screen fault. Can't find it again now, something like that:
http://forum.xda-developers.com/showthread.php?t=519441
At that time there were really few posts on the net about TD2, very few received their phone. Some had issues with it, most of them with the screen.
Until now still few votes, hope people with working phones will add their votes, 20% of spot problems/fauly phones it's pretty high.
About Pool choices, the first one is similar to "My phone is perfectly fine" (the most voted): "Fine, no problems at all till now"
You mean the choice is not clear because of the "till now": I'm sorry, my english sucks
I don't use TF3D2, I use SPB Mobile Shell.
Anyway I'm not biased and I won't to put down TD2.
I had for many years an HTC P3300 with great satisfaction and I like TD2, just want that HTC, if they actually don't, does it better.
IMHO: I've seen to many HW faults reports from ppl and too early. Was not the same with Artemis or Blacktone, not the same rate. That's the reason for the pool call.

Maybe it's the same as this: touchscreen does not "untouch"
I too have the same problem as in the link.

I've been using the phone for 3 months now. No problems with the screen whatsoever.

Same problem for me.
Got it for 2 months - original ROM, original protective screen. One day touchscreen stop responding, removed protective shield, worked for some minutes... After that some strange spots appeared on the screen. Thought, that i damaged the screen by pushing/pressing too hard, but the black/grey spots appeared random.
Gave away to service, now wait and see what the problem. I think something i the touch-sensitive layer.

I am having the same problem after 3 month of light usage.
Touch screen no longer sensing any form of touch...
My battery went flat on that day...
I was home 2-3hr later to charge...
Before full charge, I need to sms and found out that it is not sensing any touch....
Soft reset and hard reset no USE at all...

you're not the only one.. :
http://forum.xda-developers.com/showthread.php?p=4264742#post4264742

I have the 2nd Digitizer on my TD2.. and it starts to get those "untouch" problems again

Been using the TD2 since it hit the shelves here in Denmark (about 4 months ago), and I just love it!
Screen is very responsive, image is crisp and clear and overall the only thing I could complain about is the glossy backcover...
Long story short, the best phone I have ever owned

Anyone returned HD2 to HTC with screen issues?

I remember reading a thread about this back when the HD2 was released, but I haven't really thought about it until now.
Since I bought it on the release date, I've been having problems typing on my HD2. The keyboard seems over sensitive and not accurate. When I press one letter, I genereally get the one next to it. When I try and delete the accidental character, I end up typing a heap of L's, M's and P's!
If I do the screen re-alignment it seems to be better for a while, but then after a reboot (which you need to do every couple of days with WinMo!) it goes bad again.
I hate texting now and entering passwords is impossible! I've got to the point where sometimes I want to throw the damn thing away.
I've had 2 iPhones, and HTC Touch Diamond and Touch HD previously so I know its not me. If I try my father-in-laws HD2, I can work it no problem.
I contacted HTC who told me to try a Hard Reset - but as I flash ROMS frequently I know this isn't going to make a difference. They said to contact them if the Hard Reset doesnt work and send the phone in for repair.
Obviously I'll need to reflash a stock ROM first!
Has anyone sent their phone back and what happened? Did it get fixed, and how long does it take?

p3eps said:
I remember reading a thread about this back when the HD2 was released, but I haven't really thought about it until now.
Since I bought it on the release date, I've been having problems typing on my HD2. The keyboard seems over sensitive and not accurate. When I press one letter, I genereally get the one next to it. When I try and delete the accidental character, I end up typing a heap of L's, M's and P's!
If I do the screen re-alignment it seems to be better for a while, but then after a reboot (which you need to do every couple of days with WinMo!) it goes bad again.
I hate texting now and entering passwords is impossible! I've got to the point where sometimes I want to throw the damn thing away.
I've had 2 iPhones, and HTC Touch Diamond and Touch HD previously so I know its not me. If I try my father-in-laws HD2, I can work it no problem.
I contacted HTC who told me to try a Hard Reset - but as I flash ROMS frequently I know this isn't going to make a difference. They said to contact them if the Hard Reset doesnt work and send the phone in for repair.
Obviously I'll need to reflash a stock ROM first!
Has anyone sent their phone back and what happened? Did it get fixed, and how long does it take?
Click to expand...
Click to collapse
i have the shaking screen issue when zooming and i cannot detect if it is hardware issue or software or it is normal

Search for "weird touchscreen behaviour".
If you send it back to HTC they'll change the screen and it will come back fixed, or they'll do something random and it won't.

I don't think its just you, I have similar issues! I'm learning to type slower, and there are some links in the tips & hints thread that may help.

I reflashed back to the stock ROM and surprise surprise, same problem.
I emailed HTC back who then said it would have to come back for repair.
They said to phone them to arrange, so its all set up - being collected by UPS tomorrow. Hopefully it will all get sorted.
On another note - I'm now using an old Nokia 3600 Slide while my HD2 is all packed up. I'm loving having an old keypad again! Texting is a delight again, and the small form factor of this phone is great. Its a shame the screen is tiny and the Opera Mini functionality is poop!!
If HTC did a modern version of the Touch Dual with a big touch screen and a slide out keyboard then I'd buy one in a flash! Maybe I'll get a Touch Pro 3 when it comes out

did you try this?? it works for me.Hope it helps

jaqubek said:
did you try this?? it works for me.Hope it helps
Click to expand...
Click to collapse
I have been using that - or a similar one - for the last few months, which helps a bit. The problem isn't the sensitivity though, its the accuracy of the screen. When I press 'P' I get 'O', or 'R' I get 'E'. Its like its not quite lined up correctly.

hmm... I had exactly the same problem,but just because screen was too sensitive and this cab helped. Have you also tried align screen??
If this one won`t help I think your fingers are too big (sorry,joke)

hoss_n2 said:
i have the shaking screen issue when zooming and i cannot detect if it is hardware issue or software or it is normal
Click to expand...
Click to collapse
I have the same issue...
Registry tweaks to decrease sensibility help but I think is a hardware problem, so I'd like to know if someone has sent his phone for repair

patton82 said:
I have the same issue...
Registry tweaks to decrease sensibility help but I think is a hardware problem, so I'd like to know if someone has sent his phone for repair
Click to expand...
Click to collapse
all my friends iphones have this issue but less than hd2 i think it is capastive screen issue

Sent mine back to O2, not HTC. I was getting light blotches on the screen in various places, they were very prominent when displaying light colours and they were getting gradually worse. Got it back yesterday and it looks brand new.

Did you flash the phone back to stock at all?

Yes, you need to remove the HSPL and that can only be done by flashing a stock rom from the memory stick - USB flashes the stock rom but leaves the HSPL intact. If you don't they will send it back to you saying the warranty is void. As well as replacing my screen they upgraded the stock O2 rom I had on it so they obviously check the software even if it's a hardware issue you have sent it back for. It goes without saying the first thing I did when I opened the box was replace the HSPL and flash Xannytech's Evolution.

I know to get rid of it, was just wondering if you did
Touch wood never had to send mine back but at least they can't tell you've HSPL'd it in the past...

hoss_n2 said:
all my friends iphones have this issue but less than hd2 i think it is capastive screen issue
Click to expand...
Click to collapse
Not all HD2 have this issues, at default (without registry tweaks) was impossible to write anything for me.
Pagnell said:
Sent mine back to O2, not HTC. I was getting light blotches on the screen in various places, they were very prominent when displaying light colours and they were getting gradually worse. Got it back yesterday and it looks brand new.
Click to expand...
Click to collapse
You had a different kind of issue, should know if someone with shaking/poor accurancy screen has sent his phone back

Well folks... my phone was picked up last week by UPS and returned to me today.
Before sending it off I reflashed the stock ROM and got rid of HSPL.
I've tested it a bit and am very happy - so I'm now flashing my Miri ROM back on as I type! HTC have replaced 'LCM (LCD)' and replaced 'Rigid-Flex Board (FPC Board)' as their diagnostic stated 'Touch Panel function abnormally and Camera Flash Malfunction'.
Typing feels like it should as the key I hit is now the one that actually presses. I don't know about the camera as I haven't tried it yet - but I didn't think there was anything wrong with it.
My only complaint is that the phone went in for repair with an HTC Screen Protector fitted, and they must've removed and refitted it - as its full of bubbles and knackered! Never mind - I'll order another one.
If anyone has the problems I described... contact HTC and get it sorted, as this is like using a new phone. Hopefully I won't feel the need to throw it again!

I'm mightily pissed off as I have just had to return my Leo back for the 2nd time with exactly the same problem as I had previously (see above). HTC and their crappy cheap LCDs must be costing them a lot of money.

I've been experiencing almost all the bugs in my HD2, last month i sent it back to HTC for repair.
They changed the touchscreen and display because they thought it wasn't bright enough (i didn't notice that).
I got it back a week ago and immediately saw that i now have a different touchscreen, more dots and diagonal lines can be seen.
All the problems are gone and i haven't been experiencing any problems the last week.
My Advise for people with touchscreen problems, have your touchscreen replaced !

Pagnell said:
Sent mine back to O2, not HTC. I was getting light blotches on the screen in various places, they were very prominent when displaying light colours and they were getting gradually worse. Got it back yesterday and it looks brand new.
Click to expand...
Click to collapse
i had the white blotches issue too and htc also replaced my screen under warranty (turnaround 11 calendar days) and paid carriage both ways; this despite my lacking a sales invoice, having bought the phone used on ebay and the moisture tab being tripped (which they also replaced).
a very good service from htc only slightly spoiled by the tech who reassembled my phone leaving a fingerprint on the *inside* of the camera lens cover glass which rather than sending it back to them again, i cleaned off myself by means of unscrewing the back panel.

[Q] Acer s200 neoTouch LCD problem, partially responsive

dear all
I thought I was a lucky owner of the cool s200.
In fact, almost one month ago, the LCD has begun to be less responsive in the upper right part of the touchscreen. In the same zone I could see some kind of "scratches" or let's call them even "dirt bands".
Icons were harder to be recalled, and the "slide to unlock" feature was taking always a bit more of time and tries.
These "scratched area" was enlarging everyday.. and the more it grew, the less responsive the s200 would be.
Today, the Acer s200 definitely stopped responding, although the LCD shows still bright unaltered background image.
Please, have a look at the picture that I posted here
www .marcofama.it/2011/06/acer-s200-neotouch-problema-allo-schermo-lcd-risponde-parzialmente/
This has been shot yesterday
Frankly speaking, I don't know what happened
I was used to change the transparent cover every 3months, never treated the mobile bad, always cleaned the touch surface with cleaning paper for glasses. Never scratched it with keys in my pocket (always used a sock to protect the phone in everyday life).
Anyone knows what might have happened?
I'll open a RMA on Acer website... but this drives me crazy! A 400 EUR device, treated better than anything else.. cannot go broken like that.
Marco

This doesnt sound like a LCD problem.
There is the LCD display, which does the job to show the pictures and there is the digitizer or the touch panel... These touch panels become unresponsive after some time when they are resistive, like our touch panel is.
You could buy it at ebay and change it on your own to make your touch screen behave well again.
but to be honest, ive never seen this "scratches" before

riotman said:
This doesnt sound like a LCD problem.
There is the LCD display, which does the job to show the pictures and there is the digitizer or the touch panel... These touch panels become unresponsive after some time when they are resistive, like our touch panel is.
You could buy it at ebay and change it on your own to make your touch screen behave well again.
but to be honest, ive never seen this "scratches" before
Click to expand...
Click to collapse
whoa.. thanks for your feedback riotman.
That was my first impression too, as the images were correctly displayed..
I've taken my Acer to the closest Acer point today, and I need to wait for them to analyze it and let me know if that can be fixed under warranty, or not.
I'll keep you posted
thanks for your time!
Marco

Never seen this before on any Smartphone. I think it's maybe a default of connection, or some humidity. It's purely hardware, I think.

i've got the same problem but the warranity ended a month ago and acer won't repair it or take the phone back -.- this sucks..

The neotouch digitizer is poorly sealed, humidity and moisture will eventually find it's way in and start doing what it's currently doing eg, not responding on the oxidized bits.
No solution but to buy another digitizer on ebay and change it,they are cheap and you get the tools to help you do it as part of it.
There is a guide somewhere in here, I'll look for it...edit.. http://forum.xda-developers.com/showthread.php?t=742642
edit again....I bought this one http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=360364252886&ssPageName=STRK:MEWNX:IT