I guess post title says it all..
Whenever I start a phone call, the screen goes off...it is very annoying.
Any way to stop that behavior ?
I have searched this forums with no luck.
I am running Modaco's 2.3 ROM on an unbranded hero.
I have tried using Powermanager tools to define a 2min timeout in the "screen off during call" feature but with no luck.
thanks for the help!
Cheers,
-Eric
There is an app called shake awake which wakes up the screen during a call when you move it away from your face.
http://www.cyrket.com/package/com.maplekeycompany.apps.shake
Thanks. i'll give a try but the bad reviews are scaring me.
Is there a setting anywhere for that screen turning off while on call ?
i didn't liked "shake awake" the calls got dropped when the phone "shaked" sometimes i had to call the same person 3 or 4 times because the call ended. first i thought it was my phone but the problems started after installing shake awake. after i removed it my phone worked again
Keepscreen does the trick. Works absolutly great. The full version is able to keep the screen on with every application. Very handy when reading mail, browsing etc. You must set youre screenout delay in settings from the phone to 30sec.
http://nl.androlib.com/r.aspx?r=keepscreen
I'd like an app that actually does kill the screen as soon as the call button is pressed. Sometimes the Hero is too slow to turn off the screen and you hang up the call with your cheek.
Thats annoying.
After i hang up on a call (when the phone is in sleep mode and the screen is locked) the screen unlocks. this is quite contrary to what is mentioned in the phone manual chapter 1 page 45. this becomes an issue since i use a bluetooth headset and the phone remains in its sleeve/case and after every call, a whole bunch of applications will launch since the case is in contact with the screen. have i overlooked some settings or are there other owners who have faced this issue?
ideas and suggestions welcomed
did you check it out if any of the hardware buttons being pressed against the case hence wakening up the phone.?
i had it to only closed al my apps in taskm and it stoped flickering
My HD2 is also behaving in the same way even in controlled test conditions - the phone unlocks when a call comes in (I'm presented with slide to accept or reject call) The phone unlocks during the call, but fails to lock again on disconnect (either by pressing "end call" or hang up via bluetooth).
Can anyone verify this? Is it interacting with something I installed?
I believe I found a (complicated) workaround.
What I want: leave HD2 inside pocket, answer calls with bluetooth headset, hang up and phone will go back to lock.
Problem: After I hang up using bluetooth or press the big red "End Call" button or the other party hangs up, the phone stays unlocked! It stays powered on and all kinds of buttons gets clicked.
Practically all lock sw uses their own lock screen (which I don't want to install). CSDevCtrl does not trigger by phone. TouchLockPro uses its own transparent lock screen but can respond to phone events. Using the !SUSPEND for TAPI\Ended under settings does not seem to work when the screen dims about 50 secs into the call.
Solution: Use TouchLockPro together with LockAndOff. Get TAPI\Ended to run LockAndOff will turn phone off, whether by bluetooth, big red "End Call" button, or the other party hangs up.
BTW: I think there is some confusion on whether the phone locks when you
1. press the big red "End Call" button, or
2. the hard "End call" button
in the forums.
I noticed that HD2 have a light sensor next to the top ear speaker.
During a call, if the phone is put near the ear and cover the light sensor , the screen become non-active which is good.
If anyone can come up with a lock sceen using this light sensor , then the problem with random launch of program when phone inside pocket will be solved.
This lock screen should only activated right after an end of call, beacuse , sometime you may want to use the phone in a dark place.
linivan said:
I noticed that HD2 have a light sensor next to the top ear speaker.
During a call, if the phone is put near the ear and cover the light sensor , the screen become non-active which is good.
If anyone can come up with a lock sceen using this light sensor , then the problem with random launch of program when phone inside pocket will be solved.
This lock screen should only activated right after an end of call, beacuse , sometime you may want to use the phone in a dark place.
Click to expand...
Click to collapse
It's the proximity sensor that turns the screen on and off during a call, not the light sensor. How else would it work in the dark? (which it does)
johncmolyneux said:
It's the proximity sensor that turns the screen on and off during a call, not the light sensor. How else would it work in the dark? (which it does)
Click to expand...
Click to collapse
My proximity sensor does not work, when I am getting a call my screen turn off and when I am taking the phone out from my face it turn on only when I am out side at the sun!! the screen stay off when I am inside room. I tested it with flsh light and it is working also.
I have a T-Mobile US version of the HD2. I am having the same problem when using the bluetooth system in my car. After answering or making a call the phone stay unlocked. And then starts making random calls while I am driving!!!!
There has got to be an easy fix for this!!!
Buy pocketshield, problem solved.
i have this unlock problem with 1.48 rom and i solve it by pressing start button and lock. after that everything works fine unless i change theme in settings. then just repeat first step.
Solved
Same trouble with me until I use the following software. I tried it and it's almost perfect. unzip it and just copy to your HD2, run CallerLoc.exe and click Yes, you'll find:when you hang up, or he/she hang up a call, or a call is established, the screen will turn off.
Why say 'almost perfect', the software is in chinese, but the filename is in english. and it's a call location software but with the function we need.
To stop or before you delete the software, run Callerloc.exe and click Yes again.
Hope this will help you. Sorry I don't find a English version of this software. I esure and I'm using this software perfectlly with my Leo.
theciscokid said:
Buy pocketshield, problem solved.
Click to expand...
Click to collapse
Same for me
Greetings.
I understand this is quite an old thread I'm digging up but I need a little help as well and I didn't want to start a new topic just for that.
I've this silly problem, appeared right out of the blue:
You all know the standard manila behavior, when the phone is idle, the screen first dims and after some more time, depending on your preferences, the screen locks. It also locks if you press the power off button. This all was happening to me till this morning.
I added an event in the calendar (the only change I made today) and after that, my phone dims and then goes in sleep mode after the designated period of time, but DOESN'T lock!!! It doesn't even lock when I press the power off button. I can still lock it by pressing Start and then lock or by press and hold the power button and choose the lock phone option. So one would say that it's still operational, so why bother about it, but I kinda liked the standard function and I have to freaking idea why it changed!!!
I'd be most appreciative if you could offer some help with that.
Oh, I forgot to mention. Soft reset didn't solve the problem. Erasing the calendar event didn't either.
My phone runs the factory ROM (1.66.482.1 ELL), I haven't changed anything other than user settings (yeah, I'm a noob... )
Thanks in advance!
Nasos
Pocketshield could be the end of your problems. You can try it for 10 days and see how it goes...
But why do I need to buy third party software in order to revert my phone to it's original operation?
No, this is not the answer I am looking for. I was wondering if you know of any kind of settings that might have changed by accident and caused this undesired behavior.
Thanks.
The best to return to normal operation would be a hard reset. Or you can spend a while trying.
You can try
HKLM\Software\Microsoft\Shell\Lockscreen\Enable=1
HKLM\Software\Microsoft\Shell\Lockscreen\Active=1
Thank you very much. I opted for the hard reset option... I hope it stays ok this time!
My HD2 also had some strange unlocking and unwanted calling.
I noticed it appeared when using the android style lockscreen.
When I changed back to the original one, problem solved
i had this too. the andriod lockscreen seems to be a bit buggy last time i used it, i accidentially called 7 random numbers
Whenever I get an incoming call and the screen is off, it takes the screen several seconds to turn on. I almost can't answer the call because the screen doesn't come on until the caller hangs up. I'm stock but rooted. Anyone have any ideas? It's really annoying.
Wish I could help. I use the quick window case and the calls display in the window faster it seems because only the top half congress on
Sent from my VS980 4G using XDA Premium 4 mobile app
It's almost like there's screen lag when a call is incoming. I can hear the ringtone and see the LED light blinking but the screen remains black for 4-7 seconds. If the caller continues hanging on...the screen will eventually come on and show the incoming call screen.
This really sucks.
EDIT: I think I figured it out. I froze the Caller Name ID app in TiBu and I guess by freezing it, it caused some issues when calls out come in. Defrosting it fixed the incoming call screen lag. I wonder if it would still produce lag if I were to completely uninstall it?
As of late when I'm on a call using a headset wired or Bluetooth the phone screen will go dark then keep coming back on. I'm on the stock OS as of 4/19 and not rooted. I'm not sure if it's a rouge app that is causing this or maybe a bad proximity sensor. Any suggestions?
Mine does this too, but when using speakerphone.
Sent from my SM-G935T using Tapatalk
Same here..... I get during call and during meeting notification via calendar.
I've been having this problem too, but while connected to Bluetooth in my car. What I found is that if you exit the call app by pressing the home button and lock the phone, the screen will stay off. Hoping there's a better fix.
Hi, I just got my Galaxy s8 about 3 weeks ago. I've had very little in the way of problems with it. Well, except one thing... Everytime I make a call on it the screen will wake up at random. It doesn't matter if it's a call from the installed phone app or hangouts. I thought this might have something to do with the apps edge so I disabled that. Didn't fix it. I thought it might be the home button so I put it on the lowest sensitivity. Didn't fix it. I frequently call while laying in bed (who wants to hold a phone up all the time?) so the phone is between my head and a pillow. When the screen wakes up it clicks and than shuts off after five seconds because I turned on the keep off when in pocket or whatever it's called in settings. Before I turned that on the screen would stay on and buttons would get pressed usually ending up with me ending a call. I still think it's the home button but I'm not sure how to fix it. It anyone has any ideas or has the same issue please let me know.
Matt3561 said:
Hi, I just got my Galaxy s8 about 3 weeks ago. I've had very little in the way of problems with it. Well, except one thing... Everytime I make a call on it the screen will wake up at random. It doesn't matter if it's a call from the installed phone app or hangouts. I thought this might have something to do with the apps edge so I disabled that. Didn't fix it. I thought it might be the home button so I put it on the lowest sensitivity. Didn't fix it. I frequently call while laying in bed (who wants to hold a phone up all the time?) so the phone is between my head and a pillow. When the screen wakes up it clicks and than shuts off after five seconds because I turned on the keep off when in pocket or whatever it's called in settings. Before I turned that on the screen would stay on and buttons would get pressed usually ending up with me ending a call. I still think it's the home button but I'm not sure how to fix it. It anyone has any ideas or has the same issue please let me know.
Click to expand...
Click to collapse
Its the proximity sensor.
Sent from my SM-G955F using Tapatalk
Proximity sensor is working though.. I have no way to test it properly but if I place my hand near it the screen goes black and when I move it it lights up again. It also doesn't make the click
Had this bug on every device
So it's just a bug? No fix currently? I'm just wondering because I haven't seen anyone talking about this specific issue before ¯\_(ツ)_/¯
I'm also suffering from this issue