hi gents
I tryed to put tt on my snap but be snap wont find the map,that is wird.let me tell what I've done- I installed tt7 on the device no problem,went trough all settings ,when I downloaded the map and activeted it ,tt still does not find it, I tryed everything, reinstalled tt , reactivated the map but does no work, both the tt and the map are version 7 and I know they are ok because I use them for my htc polaris and htc hd2, and I am doing the same with the snap but the snap does not recognise the map ,wird.
Any ideas...
Should I try other tt and map version or I dont know....
thanks in advance
Related
Just checked my version of tomtom on my xda and it says 5.00??? is this correct i thought 5.00 would'nt work under WM5?
cheers
ferritt said:
Just checked my version of tomtom on my xda and it says 5.00??? is this correct i thought 5.00 would'nt work under WM5?
cheers
Click to expand...
Click to collapse
I think It would if you have tomtom gps receiver!
It works with a regular bluetooth gps to. Just need to know howto hexedit a file...
MADJID said:
ferritt said:
Just checked my version of tomtom on my xda and it says 5.00??? is this correct i thought 5.00 would'nt work under WM5?
cheers
Click to expand...
Click to collapse
I think It would if you have tomtom gps receiver!
Click to expand...
Click to collapse
? So your saying version 5 will work if I have an original tomtom bluetooth receiver?
ok maybe i'm not fully understanding this? If version 5.00 works on WM5 (my xda mini s) which it does why all the fuss about you must upgrade to 5.21 if you have WM5?
the only eason i ask is because my 5.21 version of tomtom stoped working after a while (dont know why),but when i reinstalled i forgot to update, so at the moment mine says version 5.00 and it's working fine with no problems
cheers
For my knowledge I think because it work already once with tomtom 5.21 some necessary files has been already loaded into the storage card & the device therefore when you reinstall TT v 5.00 it work just fine because you already have the com port existing therefore everything was ok.
To my knowledge when I install the TT 5.00 I cant find the com port for the gps then after I install the update version it appear depend on were you set it.
Hope this help clarify :roll:
MADJID said:
For my knowledge I think because it work already once with tomtom 5.21 some necessary files has been already loaded into the storage card & the device therefore when you reinstall TT v 5.00 it work just fine because you already have the com port existing therefore everything was ok.
To my knowledge when I install the TT 5.00 I cant find the com port for the gps then after I install the update version it appear depend on were you set it.
Hope this help clarify :roll:
Click to expand...
Click to collapse
i get ya mate. Just waiting to get my new BT receiver so i'll give it a good check to see if it will fully work.
cheers
In need of urgent help!
Right i've finally got a BT receiver so i can now use my xda to replace my old ipaq. Thing is I cant get my bt receiver to work with tomtom. Firstly i cant get the gps control panel to appear in settings/connections. I've done the reg edit then soft reset but stil nothing? I've read all the threads i could find but just cant get it to work. Stupid question but do i need to do the reg edit? Could someone please tell me how they installed and got it to work? please!
I have included pic of what my reg edit looks like.
please help
cheers
that looks correct, then when you go into "connections you should have a new icon "GPS"
one thing to check, if you have another regeditor check the same place in the registry
you may find what you are looking at at the moment has not been saved.
may sound silly but you may be viewing something like cache memory.
which editor are you using? (sorry if you have already said)
i'm using PHM regedit. And that pic was after i saved and exited and soft reset. As you can see the reg edit is still there after reset just no gps icon???
If i'm running tomtom 5.21 would i still need to do the edit?
cheers
tomtom5.21 without reg Editor
hi, I give you my steps that I did and it work for me even in the xda exec .
1 first connect your gps with your pda trough Bluetooth accept serial (thick the box)
Then create an outgoing serial port any (free one in my case com6)
2 after you copied the files of tomtom v5.00 into your storage card, in your ppc do file explore and look for a folder Inside your storage card called 2577 open it, (installing cab) ,first click gps then pimaddin then ttn then wzd install them all to your device.
3 now go to the update file 5.21 click on setup follow the screen the you will get a message saying the previous version……… just click ok .after the installation finish
then voila all should be fine just follow the screen you will be asked to enter your activation code again * (if you dont have email me )then setup tt5 as you like for the gps setting you will find the com6 added,simple for tt gps reciver but If you have a third party gps receiver just use the port that you created earlier (outgoing port com6 in my case) .
it should work no need to edit any registry becouse I havent and is working 100% in my mda vario and xda exec.
hope this help :lol:
cheers mate. managed to get it working. Just have probs with my bt receiver now. very poor signal.
cheers
I have a O2 XDA II mini s and Tomtom Naviagator 5 software. I am using a Tomtom BT GPS Reciver.
When I try installing the software I get the Windows Error Box.
Can anyone give me a straight forward solution to this problem, I have trawled through just about every forum I can find to no avail.
Its driving me nuts please help!
The solution is simple really.
tomtom 5.00 is apparently not compatable with wm5... well it is just not off the CD.
You have a choise either you direct to the cd "pocket pc" and copy the zip/cab files over to your phone and install it from your phone. Then you install maps onto your hard disk and copy them to a storage point.
OR
d/l tomtom 5.** about .20 currently, install that then you will still have to copy the voice from the voice directory on the CD tp the storage on your phone and will still have to do the same with the maps.
if you want you b.t. gps to work I found to copy the gps cab file and install from the phone.
it all works very well even 5.00 but like I said you cant install from the CD.
its a pain, hope this helps
Ive Tried copying the following cab files
D:\tomtom\nveur\pocketpc\gps.zip
D:\tomtom\nveur\pocketpc\PIMMAddin.zip
D:\tomtom\nveur\pocketpc\ttn.zip
D:\tomtom\nveur\pocketpc\wizard.zip
Ive installed them on my phone but i cant find the application to launch Tomtom.
Ive also tired download the update and installing the cab files, i have the same problem with that.
Am i missing anything?
Im thinking of getting ALK CO-Pilot has anyone had any problem installing it to a Wizard.
just remove it and try d/l 5.21 off the tt website.
install it from your PC not as cab.
Also you may need to install your today cab, but this is not a normal thing. also you may have to send off for a new activation code if you used tt5 on another phone.
good luck and you will have the same problem with co-pilot as it also designed for wm2003/se so stick with tomtom.
look in the jamin section there is a post i put in about solving this problem
been searching this and many other forums but i still cannot seem to find the answer.
is wm5 only capable of working with tomtom5.21? what about earlier versions? i cannot seem to get them working on mine (version 5.0/5.1).
any idea?
To make Tomtom work on a WM5 Pocket PC you need to use version 5.21
hmmm so it looks like i will need to get newer maps for tomtom coz i hear that older US maps dun work with 5.21 right?
I am sorry I can not Help you on the Information about the USA Maps.
I Hope someone elase can?
Would have thought it would try it what have you got to loose, you can get the update fromm tomtom website for free.
yea but i cant seem to find the updates for the US map on tomtom
Hi,
I don't have a Universal but have delt with this problem with the Blue Angel.
As long as you have version 5.20 you can install the software by inserting your TomTom CD/DVD and cancelling any autorun programs that load.
You then need to download the *ZIP* file from- http://www.tomtom.com/support/index.php?Language=1&query=5.21&FID=3361
Extract the ZIP and copy the setup.exe file to it's own directory, run it and it will load the setup on the CD/DVD with some extra compatability. Everything should install then.
On my Blue Angel I find the "TomTom" icon doesn't appear in my Programs list, although everything is installed. It's just a cause of creating a shortcut to "My Device/Navigator/Tom Tom Navigator"
Also, if that fails, there is another way of doing it...
http://forum.xda-developers.com/viewtopic.php?t=28085&start=0
Could someone tell me where do I download the Garmin S/W to install on my x1. I have checked the thread on this forum and I have located the following file "GarminMobileXTforWidnow Mobille_500100w". However when I try to install it, I get this file is not a valid PC application.
What am I doing wrong? Did I miss any steps or need more files?
Thanks.
You need MobileXT version and not Windows Mobile! try to find the following file "GarminMobileXTFullImage_4xxxx.exe"
Download latest Garmin Mobile XT for PPC (5.00.20w)
http://www8.garmin.com/support/agree.jsp?id=3389
Install it on your X1. Then download language and voice file and install it.
http://www8.garmin.com/support/download_details.jsp?id=3493
Base map:
http://www8.garmin.com/support/download_details.jsp?id=3645
Regards,
Damijan
i did that but it never connects to the Built-in GPS in my Xperia ?
You must have correct unlock code in order to use Garmin XT on PPC. Buy navigation software from Garmin or use Google to find workaround.
Thank You. It worked for me. I now have to get the detailed US map installed.
Garmin Detailed US Map
I need help getting detailed US map?
Thanx its work like a charm
Yeah is the same for me the status of GPS never reponse, but anyway is connected just check in view map... wait 1 min, and then rock it
salve !
I have a problem with my htc touch cruise :
i upgrade to WM6.1, downloaded from htc.com
witch install automatically tomtom nav.
i want 2 use IGO 8, because tomtom don't have maps
for this part of europe.
but IGO doesn't start.
once tomtom is installed, i can't unnistall it.
so i mede a master reset, and i reset once, before the device install
the today screen and tomtom.
making that, igo 8 works very fine.
but when i install the HTC HOME... ( today screen )
igo doesn't start enymore.
so if u have an issue at this problem, i'll
be very glad to hearit.
excuse my bad english.
Search on google about system.ini to configure igo correctly.
No problems for me
You can delete system.ini and start iGO. Program build new system.ini self.