Database Users

K-Jam / Windows Mobile 5 & TomTom 5

Anyone got TomTom 5 working with Windows Mobile 5?
I received my k-Jam this morning but the setup.exe bombs out so I cannot get TT5 installed at all
any help appreciated!
thanks

Try to install the .cab file instead, it should work.

thanks but I have tried that. 3 of the 4 CAB files install but the main one (ttn.cab) - looks like its going to install ok and then you get "the file....installation was unsuccesful".
Any ideas?
Nothing on the TT site - I'm surprised that X51v or other early Windows Mobile 5 users have not been onto this one?
It seems like a problem with Activesync 4.0 initially but as the cab files don't work i guess we need a patch from them?
anyone got it working?
thanks

TomTom 5 install Problem
I had the same problem with the auto run procedure on my mini SD card.
I solved the problem by navigating to the '2577' folder and running each cab file directly on the phone (didnt use activesync). This seemed to work for me.
However, now Im having trouble with bluetooth com ports. Tomtom configuration does not show the port numbers assigned to my paired gps reciever.

Try this
http://forum.xda-developers.com/viewtopic.php?t=29282&highlight=tt5+kjam+qtek+wm5
Let me know how well tt5 runs on the k-jam ie how smooth etc as i'm awaiting my miniSD so can't try it yet!

TomTom Navigator 5.10 works with Windows Mobile 5 and Activesync 4 - but it's NOT easy. The instructions in this thread got it working for me (though I used COM4 instead of COM0):
http://forum.xda-developers.com/viewtopic.php?t=28386
Also I found that the bluetooth GPS had to be locked on to a signal for TomTom to see it at first - was fine after that.
Although my device is a HTC Universal, it has the same OS and Activesync version as your Wizard so there's no reason why it shouldn't work. Go to the above link and enjoy :lol:

Re: re: K-Jam / Windows Mobile 5 & TomTom 5
hampers said:
thanks but I have tried that. 3 of the 4 CAB files install but the main one (ttn.cab) - looks like its going to install ok and then you get "the file....installation was unsuccesful".
Any ideas?
Nothing on the TT site - I'm surprised that X51v or other early Windows Mobile 5 users have not been onto this one?
It seems like a problem with Activesync 4.0 initially but as the cab files don't work i guess we need a patch from them?
anyone got it working?
thanks
Click to expand...
Click to collapse
I had the same problem. All cabs would install except the ttn cab. Here's how I solved it.
1. uninstall everything
2. install gps.cab
3. remove sd card and soft reset (this is the important bit)
4. install ttn.cab and this time it should work

Thanks for your help guys.
sl9; How did you get 5.1 to upgrade? After copying the files from the downloaded RAR file I tried to run the setup.exe file on the phone but get a message telling me that the file is not a valid windows mobile program (perhaps it is a smartphone program).
[/quote]

aikibrown said:
Thanks for your help guys.
sl9; How did you get 5.1 to upgrade? After copying the files from the downloaded RAR file I tried to run the setup.exe file on the phone but get a message telling me that the file is not a valid windows mobile program (perhaps it is a smartphone program).
Click to expand...
Click to collapse
The setup.exe is meant to be run on your PC, it uses activesync. Obviously we know this doesn't work so the solution is to get the 5.10 upgrade from TomTom website as the ZIP FILE, NOT THE EXE - this is important
Anyway, extract the zip, and copy the directory with the 4 cab files in it to your SD card (where you have the map on). Then execute the cabs one by one, using the tip by jdee246 above if any of the cabs don't want to install.
After you install it, then the fun begins trying to get the damn thing to recognise your GPS device, see the link in my earlier post for a guide

Thanks guys - the soft reset seemed to do it. The manual install worked fine in the end.
I now have to wait for TomTom support to give me a code as I already had two a few months back so I can't report on how well it runs yet. Overall tho the Wizard/k-Jam is pretty slow - esp for screen refreshes.
I did try the BAKONL hack which I use to test TomTom on various devices but the ttn.cab on that patch just will not install for me under Win Mob 5.
thans

Thanks to all for your help.
Managed to get Tomtom 5.1 up and running. 5.1 seems to have fixed the gps connectivity problem.
The software runs on the K-JAM just as fast as it did on my QtekS110, with no problems yet.

aikibrown said:
Thanks to all for your help.
Managed to get Tomtom 5.1 up and running. 5.1 seems to have fixed the gps connectivity problem.
The software runs on the K-JAM just as fast as it did on my QtekS110, with no problems yet.
Click to expand...
Click to collapse
Hello ,
How can I install the folder "voices" because it's not a ".cab" ?
Thanks for your help.....

Who had install Tomtom 5 on the K-jam ?
Because it's too hard for me and I don't understand everything .... :?
Thanks for your help !!!!
:idea:

In total you have to copy 4 files from your wm2003 device and paste to wm2005 in these dir:
mobile device\tomtom\CurrentMap.dat
\TomTom\TomTom\data05.bmp (voice files on cd)
\TomTom\TomTom\data05.chk (voice files on cd
\Program Files\navigator\data.chk
\Program Files\navigator\tomtom navigator.exe
\Program Files\navigator\navigator.cfg
that's all.
data05.bmp and .chk is for example, you can choose one of your own voices.
Look this up on your device other wise i send you my files so you can try them.
Good Luck
GuidO

Thanks for your help !!!!!
I try this tomorrow ....
regards.

T-Mobile MDA Compact
Hi Guys
I seem to also be having problems with my MDA.
I can install tom-tom just fine, but for some reason it just doesnt recognise my Bluetooth GPS receiver. The receiver brand & model is as per this page:
http://www.qstarz.com/html/products_BT-Q770.htm
I have enabled COM 4 & 5 in the bluetooth settings page and configred tomtom to connect using either com4 or com5 but it just doesnt work.
Any help in solving this problem would be much appreciated!
Many Thanks!

This for all of you who are still having problems...
This is what i did to get my Tomtom working on my T-mobile MDA Compact:
1. uninstall tomtom using add/remove programs.
2. using file explorer deleted the following folders:
\tomtom
\program files\navigator
\program files\contacts navigation
3. Using a registry editor - browse the software sub-folders of HKEY_CURRENT_USER and HKEY_LOCAL_MACHINE and delete any tomtom, tomtom navigator, and/or tomtom gps/ tomtom bluetooth supprt folders.
(in order to avoid steps 1,2,3 you can also perform a hard reset after you have backed up all your data & files)
4. Navigate to HKEY_LOCAL_MACHINE -> DRIVERS -> BUILTIN -> BTINSerial
5. Now change the index key from 4 to 6.
6. Exit the registry editor.
7. Soft reset your MDA.
8. Now install TTN5
9. After following the initial setup prompts of TTN5 exit it.
10. Now install tomtom nav. 5.1 (update available from the tomtom website)
11. Go back into tomtom and select "change preferences"
12. Go into GPS CONFIGURATION
13. Select Other Bluetooth
14. Select COM5
15. Click Done
16. Give tomtom about 10 seconds and your GPS navigation should now work OK!!!!
Hope this helps everyone who is trying to get this to work. I have spent a lot of time trying to find a solution that works and this i feel is it!
Needless to say use this solution at your own risk - all i can say is that its worked for me!

once installed, use this procedure.
http://forum.xda-developers.com/viewtopic.php?t=32267
It works 100%

Re: T-Mobile MDA Compact
unknown01000 said:
Hi Guys
I seem to also be having problems with my MDA.
I can install tom-tom just fine, but for some reason it just doesnt recognise my Bluetooth GPS receiver. The receiver brand & model is as per this page:
http://www.qstarz.com/html/products_BT-Q770.htm
I have enabled COM 4 & 5 in the bluetooth settings page and configred tomtom to connect using either com4 or com5 but it just doesnt work.
Any help in solving this problem would be much appreciated!
Many Thanks!
Click to expand...
Click to collapse
Can you confirm that HKEY_LOCAL_MACHINE -> DRIVERS -> BUILTIN -> BTINSerial is correct - My Vairo didnt have that key...
Plus I seem to be having the same probs as you did but with the Qstarz Q880...
Terran

ttn.CAB won't install despite reset
Tried installing TT5.0 on my Vario, but no luck. Like posted before, it won't install ttn.CAB. I tried:
removing all TT files, also from registry
soft reset,
installing gps.CAB,
remove SD,
soft reset,
then install ttn.CAB
but it still says 'installation failed'. Aaarrrggghhhhh
Any ideas, anyone?

is Destinator 3.075 on Jasjar possible?

Has anyone managed to install Destinator 3.075 on Jasjar

Yes, try searching and you'll find your answers!

1. Copy across the "DestinatorApps" directory to the PPC manually using active sync instead of using the installer
2. Copy the "DestDll.dll" into the windows directory of the PPC manually using active sync
Now you have destator installed (almost) the DestDll.dll also needs to be registered!
3. to register the dll I used "regsvr_arm.exe". just copy it onto the device, and run then select the "DestDll.dll" to register it.
4. Run Destinator and active it with you licence code as you would have previously
i had problems with connecting the com ports on destinator....so i just followed these steps:
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device (use a free com port usually try every single port until it accepts it)
And then do this:
5. Copy the "DestinatorApps/Destinator/Destinator.ini" to your desktop
6. Open this in a hex editor and change where it says C.O.M.6 to the com port of your gps. Mine was Com4 so I just changed
the 6 to a 4.
7. Copy the "Destinator.ini" file back onto the PPC
steps 5-7 i dont know if this is necessary coz after i did these steps, i closed the destinator program and then ran it and the "GPS was found automatically"....but when u go to the gps settings on the destinator program its on COM 1....and COM 4 was not on the list......but i didnt bother trying to set it up as per instructions coz its already working for me......just another note, if u turn off your gps receiver while the destinator program is running and then turn on the receiver again ur not going to be able to connect to a gps satellite etc......u have to actually close the destinator program and start it again and it will again automatically connect ur gps......its a bit complicated trying to follow the instructions......but if u follow it properly it will work.......well it worked on my jasjar as well as my XDA II with WM2003SE.....good luck

yes, thanks hadn't thought of that....
of coarse I have tried searching, I have spent 3 hours doing so ... I have found lots of references especially to a post by believer... haven't as yet found the post which gives the actual full answer ...
found one which gave the ini mod for getting around the os check
-------
if anyone else is looking for answers that part is:
modify the [Platforms] section of C:\DestinatorApps\Installer\Console\Default.ini
add the line
P2577V351=ARM
-------
what I haven't found is the issue of the dll being registered.
Now that you have wasted everybodies time and had me write all of this, are you likely to be helpful and provide a link, (as you seem to know where it is) or are you more a smartass without a clue than a geovass.

Thank you irv777 nice to see someone with intelligence

no probs

davidberrysmith said:
Thank you irv777 nice to see someone with intelligence
Click to expand...
Click to collapse
You didnt search correct...
http://buzzdev.net/index.php?option...c=view&id=2529&catid=26&limit=15&limitstart=0

geovass, thanks for the link...
irv777, followed your instructions and the only thing I changed was to install from the consol and disconect the device when I got a error re registration of file. All the rest... Perfect.
Thanks again

Destinator on JasJar and regsvr_arm.exe
Can anybody please point me in the right direction as to find regsvr_arm.exe. I have followed all the directions so far and when I try run destinator I get a Destinator object creation error. The only thing I havn't done is the register bit, please.

here you go

Destinator turns off after some minutes
First of all, thank you everybody who gave instructions for the installation, of the Destinator specially for irv777. I followed the irv777 instructions and I could install the Destinator and configure the GPS perfectly. But I could notice that after using some minutes the Destinator, the screen of my Pocket PC turned off and when I turned it on again (using the light button), the GPS communication was lost because the GPS COM Port was changed. Does anybody have the same problem? Does anyone have any idea of what is happening in my case? I could realize that when I open the registry on HKEY_LOCAL_MACHINE/SOFTWARE/Apps/DestinatorApps of my Pocket PC it is different from the registry of the Pocket PC of my friend who installed the Destinator using the custom metodology (he doesn't have WM5). Is it the cause of that problem? If it is the cause how can I fix it? I don't know how to edit registry.

I havn't found any problems with it on mine. a possible work around for you might be to change the power and light settings so they don't turn off when you are using destinator.....
;-)
good luck

obviously i am doing something wrong here....
copy the destinator apps were in the ppc? i dont have enough memory eventhough my exec is recently formated (ppc 32mb free/destinator apps 36mb).
anybody?
edit: please mates.... i am leaving for a road trip in ten days and i could realy use a gps

Aussie topic - destinator cont'
hi guys,
I followed the instructions:
1. installed destinator on PC
2. copy all files (140MB) of them to the storage card
3. were trying to run ...\ARM\Independent\DestinatorApps\Destinator\Destinator.exe and got the error message described in the discussion
4. registered the dll in the windows directory...
now when trying to run the destinator.exe from the storage card I'm getting nothing (the screen flicker once)...
any ideas? any help would be appriciated.

irv777 said:
1. Copy across the "DestinatorApps" directory to the PPC manually using active sync instead of using the installer
2. Copy the "DestDll.dll" into the windows directory of the PPC manually using active sync
Now you have destator installed (almost) the DestDll.dll also needs to be registered!
3. to register the dll I used "regsvr_arm.exe". just copy it onto the device, and run then select the "DestDll.dll" to register it.
4. Run Destinator and active it with you licence code as you would have previously
i had problems with connecting the com ports on destinator....so i just followed these steps:
First you've got to pair your GPS.
Then go to the "COM" tab in the bluetooth manager
Add a new outgoing port with the GPS as device (use a free com port usually try every single port until it accepts it)
And then do this:
5. Copy the "DestinatorApps/Destinator/Destinator.ini" to your desktop
6. Open this in a hex editor and change where it says C.O.M.6 to the com port of your gps. Mine was Com4 so I just changed
the 6 to a 4.
7. Copy the "Destinator.ini" file back onto the PPC
steps 5-7 i dont know if this is necessary coz after i did these steps, i closed the destinator program and then ran it and the "GPS was found automatically"....but when u go to the gps settings on the destinator program its on COM 1....and COM 4 was not on the list......but i didnt bother trying to set it up as per instructions coz its already working for me......just another note, if u turn off your gps receiver while the destinator program is running and then turn on the receiver again ur not going to be able to connect to a gps satellite etc......u have to actually close the destinator program and start it again and it will again automatically connect ur gps......its a bit complicated trying to follow the instructions......but if u follow it properly it will work.......well it worked on my jasjar as well as my XDA II with WM2003SE.....good luck
Click to expand...
Click to collapse
Is the procedure similar if you have an embedded GPS?
I have a Mio P350 & want to put Destinator 3 on it, do you install the console on the PC first, if so what files & from where do you install on the PDA, & what do you install on the SD card?
Appreciate any help I can get, as the MioMap v3.2 is driving me crazy!

TT5 & BT: procedure to install & make it work

Hi,
I just tested successfully the following procedure:
1) install TT5 using .cab files (transfer to the device & run each one)
2) pair BT unit;
3) configure TT5 using "Other Bluetooth GPS", "max baud rate", "com 0";
4) close TT5;
5) copy the navigator.cfg file (in Programs\Navigator on your device) via Activesync to desktop;
6) open the file with wordpad - DO NOT ALTER anything else but COM0 to COM5;
7) close the file;
7b) save the file modified back to the device;
9) Turn on BT reciever;
10) start TT5, wait a few seconds and...voilà !

Cool
I'm glad to see that someone else has tried it and it works for them too.

thanks Italos !!!

Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!

gogol said:
Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!
Click to expand...
Click to collapse
We are not talking Magician we are talking Wizard
I had it working fine on my Magician, just like you
But I have upgraded to a Wizard and the above
process is what I had to do to get it work on the Wizard

Yeah I know that. We are talking about WIZARD.
That's why I use but ... meaning: it (my tomtom) is working fine with my Magician, but I dont know if it will work with WIZARD.
That's why I ask "What kind of tomtom do you use?" ... Registered? Or CRACKED one (like mine, in my Magician).
darkwarrior said:
gogol said:
Sorry for asking, is this registered TT5 or <you-must-know-what-I-meant> ?
Because I dont have a registered version, but it is working find with my Magician.
Thanks!
Click to expand...
Click to collapse
We are not talking Magician we are talking Wizard
I had it working fine on my Magician, just like you
But I have upgraded to a Wizard and the above
process is what I had to do to get it work on the Wizard
Click to expand...
Click to collapse

Makes no difference m8 - the problem seems to be "universal"
It should work if you follow those instructions, you have a BTGPS receiver and whatever install of TT5

Hi Guys,
New on this Forum, bought a Qtek 9100 a few days ago.
Have been struggling since to get tomtom 5 to work with my BT GPS, and
I just wanna say big thx to Italos for the instructions, worked like charm.
One thing though, I still got TomTom 5, I tried to install the 5.1 update and ended up in it saying it can´t find any maps...ok so back in version 5 all that was located in the "\My Documents\TomTom\CurrentMap.dat file. SSo I edited that one to point to my map on the storage card.
Fired up TomTom 5.1 again, and still not working, ok then I was not sure I had a real tomtom5 map, so I tried to extract the map from the TomTom5 DVD, well wen´t fine just to extract the cab, but I then ended up with these files.
00000.poi.010
000cline.006
000faces.004
0mapinfo.005
0traffic.009
SCANDI~1.000
SCANDI~1.007
tmccodes.008
I guess it will work if I extrackt these ones and replace those on my card, but how do I go about it?
I have tried with winrar, and that does not work, anyone who knows which program can extract these files?
thx / fahlis

O2 XDA II mini s Tomtom Naviagator 5

I have a O2 XDA II mini s and Tomtom Naviagator 5 software. I am using a Tomtom BT GPS Reciver.
When I try installing the software I get the Windows Error Box.
Can anyone give me a straight forward solution to this problem, I have trawled through just about every forum I can find to no avail.
Its driving me nuts please help!

The solution is simple really.
tomtom 5.00 is apparently not compatable with wm5... well it is just not off the CD.
You have a choise either you direct to the cd "pocket pc" and copy the zip/cab files over to your phone and install it from your phone. Then you install maps onto your hard disk and copy them to a storage point.
OR
d/l tomtom 5.** about .20 currently, install that then you will still have to copy the voice from the voice directory on the CD tp the storage on your phone and will still have to do the same with the maps.
if you want you b.t. gps to work I found to copy the gps cab file and install from the phone.
it all works very well even 5.00 but like I said you cant install from the CD.
its a pain, hope this helps

Ive Tried copying the following cab files
D:\tomtom\nveur\pocketpc\gps.zip
D:\tomtom\nveur\pocketpc\PIMMAddin.zip
D:\tomtom\nveur\pocketpc\ttn.zip
D:\tomtom\nveur\pocketpc\wizard.zip
Ive installed them on my phone but i cant find the application to launch Tomtom.
Ive also tired download the update and installing the cab files, i have the same problem with that.
Am i missing anything?
Im thinking of getting ALK CO-Pilot has anyone had any problem installing it to a Wizard.

just remove it and try d/l 5.21 off the tt website.
install it from your PC not as cab.
Also you may need to install your today cab, but this is not a normal thing. also you may have to send off for a new activation code if you used tt5 on another phone.
good luck and you will have the same problem with co-pilot as it also designed for wm2003/se so stick with tomtom.
look in the jamin section there is a post i put in about solving this problem

How to install TOM TOM?

I've been given the following instructions but i dont understand them...
Simply copy all the files from this archive to your PocketPC memory card.
Insert your memory card into your PocketPC and it will begin to install.
The problem is, that i dont know which is the setup file so it will install on my Vario?

What files do you have in the archive?
In my experience Tom Tom does not install on the Device. It has to be run on the PC with the Device connected to Acyivesync. However If you create the correct directories on the device and copy the correct files it just works (although there are problems with TT V5 on WM5).
See these posts:
http://forum.xda-developers.com/viewtopic.php?t=44666&highlight=
http://forum.xda-developers.com/viewtopic.php?t=43412&highlight=

Will give the posts a look, ive attached an image of the folders i got....when i put the storage card in, it loads tom tom for a second then doesnt... :S

Folders in attachment...

TomTom Navigator v5.00 (4890) with 'Great-Britain-Map' v562
Thats the version I've got mate, is the compatiable with Varios??

So your TomTom is on the storage card, not a CD.
I've never used that version but it is probably the same - try the following.
See if you have a ttncab folder in one of the folders (2577 I think).
If you do then try this.
Create some folders on the Device in memory (not on the card) as per the instructions in one of my posts on the links I gave you above.
- extract, rename and and copy the files over from the ttncab,
- copy the voices and zip file from the storage card to the device,
- move the map directory to the root of the storge card
you should find it works except for not being able to find the GPS device.
- setup your GPS device
If you have V5 you will have problems ( see other posts about the problems), but you could try this
http://forum.xda-developers.com/viewtopic.php?t=46634
and see if that works.

no worries mate, i installed all the cabs found on the CD and its installed

can anyone explain to me how to pair the devices so tom tom picks my bluetooth GPS ?
Thanks in advance

From a previous post:
This is what I did today on my XDA Mini S. It's collected from this and other forums.
First I had to install the GPS icon on the PDA in settings/connections using a freeware registry editor.
STEP 1: ACTIVATE THE GPS CONTROL PANEL
1. Start up a registry editor
2. Go to: HKEY_LOCAL_MACHINE\ControlPanel\GPS Settings
3. Delet the Dword in there and the value and replace them with:
A new DWORD called "Group" and give it the value of "2" (dec)
4. And create a new string called "(default)" with no value (I think there was originally a string called redirect, rename this "(default)" if it's there 5. The GPS panel will now show up in your connection settings. (check it does)
note: you may have to soft reset after each stage if it appears not to work straight away but i managed to make these changes then saved them soft reset and then went to control panel in settings and a GPS option was there. You'll need this for the next stage. Wait about 1 minute before doing the soft reset.
STEP 2: Set up the GPS & Tomtom
1. Establish a bond with your GPS and select the checkbox for serial access.
2. In the GPS control panel, select the GPS program to 6 and make sure that the hardware one, is set to None.
3. Start TT5 and the GPS settings, select another bluetooth GPS, and you will see COM 6 free. Select COM 6 and close TT5.
4. At the GPS control panel again, now select COM (none)
5. At BT: select OUTGOING port to 6.
6. Finally start TT5 and it should connect automatically. Wait for a couple of seconds and click the GPS settings and you should see it has connected.
If you follow the above exactly it should hopefully work.
Dave

davidkw, is there not any easier way mate? if not then can you direct me to a decent reg edit that wont bugger my phone up? im kinda new with all this stuff as you can see....
Thanks for the hekp

Did you try this
http://forum.xda-developers.com/viewtopic.php?t=46634
If it works for you it saves doing any registry changes - you only have to transfer a file from the Device to the PC, edit it and copy it back.
If you keep a backup of the file you can replace it again if it doesn't work, then look at the other way to do it using the registry.

will give it a go mate, but how do i get a hex editor??

will give it a go mate, but how do i get a hex editor??

Try here, PHM Registry editor - you can make a back up before you make any changes. I'm new too but it's easy to use.
http://www.pocketpcfreewares.com/en/index.php?soft=31
Dave

how do i get a hex editor?
Click to expand...
Click to collapse
I've attached one.
Unzip it and run the .exe.
Open the navigator.cfg and change the com setting.
I've attached a screen shot of what it looks like. In this you would change the '7' after 'COM' (yours will be something else - '2' if you used port 2).

ive installed the program dave, but i cant find it on my Vario :S :x :?:

pewe, ill give it a go mate, and get back to you. Thanks for the help and currently i only get the option for com 7 when tom tom only has 9...thanks for the attachement

pewe , i need some help mate...would i set com port in New outting going port or New in comming port...
also the hex editor stuff looks really complicated to me, is it possible if you can highlight the figures i need to change...in my tom tom right at the top it only allows me to use com port 9...
Thanks for the help so far mate :idea: and dave for helping too

SBouri,
If you follow the registry instructions slowly and carefully, it will all work fine. i have just done mine and it works a treat.
I went a completely different way to get my tomtom working however by using the update from Tomtom themselves.
I wish I'd seen this first cos it was a real ass pain. LOL

would i set com port in New outting going port or New in comming port
Click to expand...
Click to collapse
Set the new 'outgoing' port.
Select port 6 or 7.
in my tom tom right at the top it only allows me to use com port 9...
Click to expand...
Click to collapse
Select any port in TomTom. If your only shows 9 - use that.
When you transfer the navigator.cfg to the PC and open it in the hex editor it will show COM9. Change the 9 to 6 or 7 depending on what you set up as the outgoing port for the BT unit.
Save the navigator.cfg and copy it back to the device to replace the existing one.
Start TomTom and see if it sees the device.