Hello everyone.
Have someone manage to stop the led from flashing wile charing?
When i turn off the led in the system, when i press ok to come back to "main" config windows for sound and led it's ok. but when i press ok in that windows nothing happens, the window don't close. I have to press ok for a few seconds then it closes. but if i go in and check the led for charing is still on!!!
Or does someone has the reg key for this so i can turn it off?
Next. does anyone have a suggestion on how to make "usb to pc" available as disk drive? i have try'd "WM5torage" but that program seams not to like the X2.
Any suggestions?
EDIT:
i found a other version of WM5storage. so now it's that seams to work
Low_Down
Low_Down said:
Hello everyone.
Have someone manage to stop the led from flashing wile charing?
When i turn off the led in the system, when i press ok to come back to "main" config windows for sound and led it's ok. but when i press ok in that windows nothing happens, the window don't close. I have to press ok for a few seconds then it closes. but if i go in and check the led for charing is still on!!!
Or does someone has the reg key for this so i can turn it off?
Next. does anyone have a suggestion on how to make "usb to pc" available as disk drive? i have try'd "WM5torage" but that program seams not to like the X2.
Any suggestions?
EDIT:
i found a other version of WM5storage. so now it's that seams to work
Low_Down
Click to expand...
Click to collapse
I'm going to assume your using MR1 as i am and have just tried this and can confirm that it will not exit or go to any other of the tabs.
This did work before the MR1 update
** EDIT **
i've just done a fresh install of MR1 (i messed up a mod) and now the ok button closes the menu . . . . .
Well, X2 should support the mass storage mode. It is in the specifications (here, for example).
Biges said:
Well, X2 should support the mass storage mode. It is in the specifications (here, for example).
Click to expand...
Click to collapse
maybe tru but where is a lot of things that don't work so......
Low_Down said:
maybe tru but where is a lot of things that don't work so......
Click to expand...
Click to collapse
Once I get my X2 back from service (had not much time to play with it before it refused to work), I'll explore this. Let's hope MR3 will definitely fix this. Or MR4, MR5... uh.
Biges said:
Once I get my X2 back from service (had not much time to play with it before it refused to work), I'll explore this. Let's hope MR3 will definitely fix this. Or MR4, MR5... uh.
Click to expand...
Click to collapse
still waiting for MR2,lol
Related
hi
this issue comes everyday thats mean i have to reset my device many times. but i figured a solution to aviod resetting the device.
if the issue come out:
1- press "Turn on flight mode"
2- press "Turn off flight mode"
3- next, press on bluetooth icon and u may face a message that would said "Make sure that u have ... bla bla bla"
4- the problem solved and u can use the bluetooth without reset.
have a nice day 8)
thanks man.......
You can also try to open the Bluetooth setting of the control panel. This will also enable the bluetooth without soft reset. This problem maybe caused by wrong wait timeout while enabling bluetooth hardware.
this is a good trick, I try this on next error message
But as I can see many of us got the problem.
this must be a fix issue on next ROM
i didn't use the bluetooth patch which came inside the ext rom and i don't have problems with the bluetooth at all...
PapaDocta said:
i didn't use the bluetooth patch which came inside the ext rom and i don't have problems with the bluetooth at all...
Click to expand...
Click to collapse
while u have'nt used patch_bthusb, can u make a test?! try to send file to ur Magician via bluetooth while it's screen off and bluetooth ON. 8)
lets see if ur device will apper and accept the file or not? :wink:
NiGhTmArE
NightmarE said:
PapaDocta said:
i didn't use the bluetooth patch which came inside the ext rom and i don't have problems with the bluetooth at all...
Click to expand...
Click to collapse
while u have'nt used patch_bthusb, can u make a test?! try to send file to ur Magician via bluetooth while it's screen off and bluetooth ON. 8)
lets see if ur device will apper and accept the file or not? :wink:
NiGhTmArE
Click to expand...
Click to collapse
just tried and works.. the phone's screen goes on and accepts the transfere....
PapaDocta said:
NightmarE said:
PapaDocta said:
i didn't use the bluetooth patch which came inside the ext rom and i don't have problems with the bluetooth at all...
Click to expand...
Click to collapse
while u have'nt used patch_bthusb, can u make a test?! try to send file to ur Magician via bluetooth while it's screen off and bluetooth ON. 8)
lets see if ur device will apper and accept the file or not? :wink:
NiGhTmArE
Click to expand...
Click to collapse
just tried and works.. the phone's screen goes on and accepts the transfere....
Click to expand...
Click to collapse
thanx alot for telling me that, from now i wil ignore installing patch_bthusb :lol:
yaaay i figured out a new way to solve the issue by using buzzlayer SwitchIT tools....
1- download the latest version of SwitchIT and install it.
2- assign a button or add shortcut at pocket plus (Bluetooth Switch or Bluetooth Switch Discoverable)
3- while the bluetooth is off press on SwitchIT button/shortcut and turn off the screen then return it on.
bingo, the bluetooth work again without any problems...
@PapaDocta :
BTW, it tried to ignore install the patch but i faced the same no hardware issue
@NightmarE
SwitchIT is a very good app... but i have noticed something that when i do a soft rest sometimes the device won't boot.. it will stuck at the Imate image.. and i'll have to soft rest a couple of times to get the device to boot... i think it's switchIT because i just did a hard rest and installed only SwitchIT without any other application and still have this problem... could ya check if you have the same thing with ya?!
PapaDocta said:
@NightmarE
SwitchIT is a very good app... but i have noticed something that when i do a soft rest sometimes the device won't boot.. it will stuck at the Imate image.. and i'll have to soft rest a couple of times to get the device to boot... i think it's switchIT because i just did a hard rest and installed only SwitchIT without any other application and still have this problem... could ya check if you have the same thing with ya?!
Click to expand...
Click to collapse
nothing at all, thats weird ... do you think this is a hardware issue?
not sure... but could be since i'm having problems with gprs connection can't hold a connection for a few minutes without disconnection!! i'm about to break this phone..
I have a BIG problem because I install this app 'EveryWAN-Remote-Support-3-0-15760' from this http://www.sparus-software.com/spip....wnload&lang=en and I don't know why... my HD is death now I was in activesync with this app and I try all tools TaskManager, FileStorage and when I click the icon 'turn-off screen'... no more HD..., no charge... dont soft-reset, don't bootloader, etc. I'am now very un-happy because I don't understand what's happen with my HD
If nothing else work, why don't you try a hard reset?
http://www.youtube.com/watch?v=puL795s1bY4 <- second half of the video is how you do it.
Hi,
Have you tried to remove the battery, wait a little, and place it back?
Also, refer to this thread:
http://forum.xda-developers.com/showthread.php?t=465601
Regards,
P.
Thanks for your help... I know do a Hard-Reset but the problem is don't charge, don't show the red led in top charging also, I put off the battery 20 minutes and no way... don't work the button Power... don't work the button Soft-Reset, I can't enter in Bootloader mode...
Hi,
Have you checked that thread I mentioned?
Look specially at this post:
pdc4 said:
Well, some other things to try:
- check if some button (including soft reset) is mal-functioning. Try to release, or clean them.
- is any card (sim or memory) in the phone? If yes, remove them.
- has the phone been exposed to moisture, liquids? ensure that it is dried out, but do not expose it directly to heat or to a dryer...
- try to connect the charger to the phone without battery, leave it a little then disconnect, then place battery and finally the charger , trying to power on
- have you contacted the author of the rom about the issue? Maybe he might have some ideas ...
Good luck!
Regards,
P.
Click to expand...
Click to collapse
Yes I check and I follow all... my Rom is Pzucchell 1.7 but... when I have this problem... I was in AS with this app EveryWAN Remote and like I say before... when I click Turn-off screen I only see similar this http://forum.xda-developers.com/showpost.php?p=3106017&postcount=22
Hi guys... well as you can see by the title, i'm confused as to how this may have happened. I've tried to do a reset (settings > about > reset) but that doesn't seem to rid the thing back to square one... anyone got any ideas? This is really bugging me big time... is there a way to hard reset with bootloader screen like holding certain buttons down with power button as well cus i haven't seen any info on that either
Thanks in advance if someone can help me on this one
SOLVED... full format is...
hold vol DOWN and CAMERA buttons and then power up device... press windows button twice when prompted to wipe the thing!
TheShowStopper said:
SOLVED... full format is...
hold vol DOWN and CAMERA buttons and then power up device... press windows button twice when prompted to wipe the thing!
Click to expand...
Click to collapse
Goes to the Wiki, millions of thanks
anaadoul said:
Goes to the Wiki, millions of thanks
Click to expand...
Click to collapse
You're welcome mate. Only took a few battery pulls and trial and errors on my part to guess the right combo! lol
Glad to be of use at last!
*THINK* Now can someone help us Windows XP users out and finally crack this blummin XAP and SDK problem as commented on on many posts i wonder? As luck would have it, probably not!
Hey, i need help. I know nothiing about these phones. I came on here and got help last year to make my hd2 windows into an android.... i did all the work, wahtever you wanna call it, flashing or ROM. something like that. Well anyways, over the the past few months, its been getting stuck on the unlock screen. nothing works, then all of a sudden it will swipe and unlock. now its been stuck for two weeks and i have tried everything, taking the battery out and resetting from the small button in the back, but nothing changes.
lovelyxleo said:
Hey, i need help. I know nothiing about these phones. I came on here and got help last year to make my hd2 windows into an android.... i did all the work, wahtever you wanna call it, flashing or ROM. something like that. Well anyways, over the the past few months, its been getting stuck on the unlock screen. nothing works, then all of a sudden it will swipe and unlock. now its been stuck for two weeks and i have tried everything, taking the battery out and resetting from the small button in the back, but nothing changes.
Click to expand...
Click to collapse
you can try this but you will have to press it really really hard and try it multiple times
http://forum.xda-developers.com/showpost.php?p=19458378&postcount=2
Kameirus said:
you can try this but you will have to press it really really hard and try it multiple times
http://forum.xda-developers.com/showpost.php?p=19458378&postcount=2
Click to expand...
Click to collapse
Then once you do above and get the screen working again, you can do what i did and use attached program to remap one of the other buttons (i chose green phone button since i press the phone icon to use the phone anyhow) and remap it to function as the power button and never worry about the screen again
To install: download to computer, then use adb install to install.
Or the simple way, just download straight to phone, navigate to the downloaded folder using a file explorer(astro works well found on the market) and launch it through the file explorer to install.
elesbb said:
Then once you do above and get the screen working again, you can do what i did and use attached program to remap one of the other buttons (i chose green phone button since i press the phone icon to use the phone anyhow) and remap it to function as the power button and never worry about the screen again
Click to expand...
Click to collapse
pssst
you forgot the attachment
Kameirus said:
pssst
you forgot the attachment
Click to expand...
Click to collapse
Not uh! lol thanks Ive edited post
elesbb said:
Not uh! lol thanks Ive edited post
Click to expand...
Click to collapse
..lol....
Yep, I have tried that.... pushing the end button a zillion times. It use to work before, but now it doesnt. I tried the end button, the call button, sliding over the other keys, just tapping on the unlock keys on the screen... but nothing. i do it so much, i pretty much start banging on the keys.....ummm... not sure if that made it worse??
is there anyway i can just reset my phone.... perhaps flash a new rom. I really dont care what is on my phone at this point. phone numbers not saved on sim can be replaced.... i dont care about anything else as far as apps. i just want to be able to use this phone again, whatever it takes. not sure if this is even possible without unlocking the screen first. i am so frustrated i wanna let my rottweiler accidently chew it up, just so i can get a new phone...
i know there is some smarty pants out there that can figure this out... help me pleeeeeeeeeeze!!!!
lovelyxleo said:
Yep, I have tried that.... pushing the end button a zillion times. It use to work before, but now it doesnt. I tried the end button, the call button, sliding over the other keys, just tapping on the unlock keys on the screen... but nothing. i do it so much, i pretty much start banging on the keys.....ummm... not sure if that made it worse??
is there anyway i can just reset my phone.... perhaps flash a new rom. I really dont care what is on my phone at this point. phone numbers not saved on sim can be replaced.... i dont care about anything else as far as apps. i just want to be able to use this phone again, whatever it takes. not sure if this is even possible without unlocking the screen first. i am so frustrated i wanna let my rottweiler accidently chew it up, just so i can get a new phone...
i know there is some smarty pants out there that can figure this out... help me pleeeeeeeeeeze!!!!
Click to expand...
Click to collapse
Nope. Its pretty much hosed. These are classic symptoms of the digitizer cable losing connection with the main board. Pressing the red End key forcefully can sometimes mate the connection back, but otherwise if that doesn't work nothing will. If you're feeling brave, you can take apart the phone piece by piece and reassemble it. That might do the trick. Else, you have to replace the digitizer.
Ok... first of all, what is a digitizer?
Also, is there any way I can connect it to my computer via usb and try to remove the files that i put on there for the rom.... that would just make it a windows phone again. Because Im confused.... is this a phone malfunction or a file issue?
lovelyxleo said:
Ok... first of all, what is a digitizer?
Also, is there any way I can connect it to my computer via usb and try to remove the files that i put on there for the rom.... that would just make it a windows phone again. Because Im confused.... is this a phone malfunction or a file issue?
Click to expand...
Click to collapse
Can you get to the bootloader (stripey screen)? If so, then just flash a stock WinMo ROM from there and it should work.
Well I am able to restart the phone after I take the battery out. So there is a point at the startup while its loading, it says 1-2-3-4 Go Go Go. Not sure if there is anything I can from there.
Oh btw... for a brief few minutes yesterday, the phone did unlock. I got so excited that I started reading all my text messages I missed over the passed 2 weeks and also reviewing missed phone calls. And by that time, the phone locked again. No luck since.
lovelyxleo said:
Well I am able to restart the phone after I take the battery out. So there is a point at the startup while its loading, it says 1-2-3-4 Go Go Go. Not sure if there is anything I can from there.
Oh btw... for a brief few minutes yesterday, the phone did unlock. I got so excited that I started reading all my text messages I missed over the passed 2 weeks and also reviewing missed phone calls. And by that time, the phone locked again. No luck since.
Click to expand...
Click to collapse
Take the battery out, put it back in then hold down the power (end call) and volume down buttons. From here, you can flash a stock ROM via the USB port or flash a stock ROM via your SD card
lovelyxleo said:
Well I am able to restart the phone after I take the battery out. So there is a point at the startup while its loading, it says 1-2-3-4 Go Go Go. Not sure if there is anything I can from there.
Oh btw... for a brief few minutes yesterday, the phone did unlock. I got so excited that I started reading all my text messages I missed over the passed 2 weeks and also reviewing missed phone calls. And by that time, the phone locked again. No luck since.
Click to expand...
Click to collapse
If you remap the call button to the power button, as lung as you don't hit the end key anymore your screen should stay working. It has for me
Sent from my HTC HD2 using Tapatalk
OOOOH... ok how do i remap?
Nigeldg said:
Take the battery out, put it back in then hold down the power (end call) and volume down buttons. From here, you can flash a stock ROM via the USB port or flash a stock ROM via your SD card
Click to expand...
Click to collapse
I have no idea how to flash a stock ROM... any links???
lovelyxleo said:
OOOOH... ok how do i remap?
Click to expand...
Click to collapse
use the attached apk in this post from before and then find the call button inside the program i think its 231 or something like that. Then press apply and voila green key is now your power key
elesbb said:
use the attached apk in this post from before and then find the call button inside the program i think its 231 or something like that. Then press apply and voila green key is now your power key
Click to expand...
Click to collapse
Okk, i can try this... but do i download that file to the computer then to the phone via usb or ?
i see the file, i just dont know what to do with it.
lovelyxleo said:
Okk, i can try this... but do i download that file to the computer then to the phone via usb or ?
i see the file, i just dont know what to do with it.
Click to expand...
Click to collapse
You can eitherdownload to computer, the use adb install to install the program, or download to your phone and use a file browser to navigate to your downloads and install from there. Downloading to your phone is probably the easiest for beginners.
Sent from my HTC HD2 using Tapatalk
i definatly think this is the digitizer problem... same thing heppend to me..
elesbb said:
You can eitherdownload to computer, the use adb install to install the program, or download to your phone and use a file browser to navigate to your downloads and install from there. Downloading to your phone is probably the easiest for beginners.
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Ok, I can try that. But I am still waiting to get this phone screen to unlock. I guess I cant do anything until then.
HI I am new to android and HTC and last night i have put Android NAND using MGLDR. was working fine but for some reason when i want to lock the screen and i press the power button it shows more option menu instead to lock the screen. Before when i press once the pwer button it locks but if i hold the button it shows more options menu. Now i have to press twice the button to lock screen and when i wqant to unlock it will do the same it will show up the menu. I tryed to reinstal it again from my SD card using ClockWOrk, MGLDR, puting him back to factory setting but still soemtimes it does that. Now waht i want to do is to do task29 and to again everything. I have found on this site an exe by doloop for task29 but i get error cant connect to phone check USB connection. Run as admin on my win7 64bit and disabled driver signature but stillsame error. How to fix the unction of this button?
Android isntaled:
TyphooN_CM7_v3.6.8-MAGLDR.zip
I'm pretty sure that's an issue with your END button, rather than with Android.
Has your screen been unresponsive sometimes?
Marvlesz said:
I'm pretty sure that's an issue with your END button, rather than with Android.
Has your screen been unresponsive sometimes?
Click to expand...
Click to collapse
No. Never.
NiceSub said:
No. Never.
Click to expand...
Click to collapse
Are you sure? I'm 99% sure it isn't anything to do with the ROM, it sounds like your end key is getting stuck when you press it. I used TyphooN for ages (in fact, if I'm not mistaken up to that very version) and it never failed me, so I don't see how it wouldn't work for you. Try flashing back to WinMo and seeing if the same applies there.
I believe you're having the famous issue of HD2 with the 'end' button. Try another rom first to be sure, if that's the case, start using "Button Savior" or similar app...
NiceSub said:
but i get error cant connect to phone check USB connection. Run as admin on my win7 64bit and disabled driver signature but stillsame error.
Click to expand...
Click to collapse
64 bit windows often causes USB connection errors.
kinda sounds like something i had a problem with
http://forum.xda-developers.com/showthread.php?t=1716901
Hmmm good advices i see here...
Ok i somehgow menaged to wipe out Android (I know that i menaged to wipe it out becouse when it had to boot up MAGLOADER it could said that there is no NAND android something like that) and put it back after reinstal of Android first I checked the button and It had same problems...but sudenly whil etoday I was cinema I tried to lock the screen by pressing the ower button again and it worked just fine...and it work now while I am writing...so ROM is not(99%) it could be that phone is thinking that i am holding the button down...(bad connection or something) so when that happens I need to press twice fast button to lock the screen....so about this theory about hardver problem with button what you got say? Is it dificult to open it at home and see if is there something in it?Is there some maybe guide how to open it or maybe i take to some servis shop and hope for the best?
NiceSub said:
Hmmm good advices i see here...
Ok i somehgow menaged to wipe out Android (I know that i menaged to wipe it out becouse when it had to boot up MAGLOADER it could said that there is no NAND android something like that) and put it back after reinstal of Android first I checked the button and It had same problems...but sudenly whil etoday I was cinema I tried to lock the screen by pressing the ower button again and it worked just fine...and it work now while I am writing...so ROM is not(99%) it could be that phone is thinking that i am holding the button down...(bad connection or something) so when that happens I need to press twice fast button to lock the screen....so about this theory about hardver problem with button what you got say? Is it dificult to open it at home and see if is there something in it?Is there some maybe guide how to open it or maybe i take to some servis shop and hope for the best?
Click to expand...
Click to collapse
careful if you take it apart. i did it to mine and ripped a cable that i thought was lose. no fun to be without a decent phone :crying: