Database Users

You are subscribed to this thread Imate JasJar Enterin Bootloader mode.Turnon fail

Hello Everyone,
I am not a professional or anything i am just a student.So kindly when you use the terminology make sure its understandable for a person with less knowledge about unlocking and stuff.
Ok here goes my problem, Its an I-mate Jasjar and its not turning on when i press the Power button. It shows USB on top and V1.00 when entering Bootloader mode. I dont know what am i suppose to do after that as i ran into a professional guy on msn and he showed me how to get into bootloader mode and he is too busy to help me out so i am here.
What i did was Its battery was low and i tried to Hard Reset it and now it wont turn on.
So any help is much appreciated

instuctions for stuck in bootloader, but Uni is recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
instuctions for stuck in bootloader, and Uni is not recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial

chasmanian said:
instuctions for stuck in bootloader, but Uni is recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
instuctions for stuck in bootloader, and Uni is not recognized.
http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Click to expand...
Click to collapse
Well said!
In the Wiki you can find a lot of usefull help!

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is the Error i am getting when i followed Method 2 .
Kindly tell me what am i doing wrong i already Unchecked the USB connection in ActiveSync ....Whatelse am i suppose to do...please guys i really love this phone and cant wait to use it again.
Thanks.
ZODI.

hi ZODI,
you better kill the ActiveSync all together by using windows tak manager. I mean to kill the process called wcescom.exe on your PC.
Then reconnect your UNIVERSAL.
Wait a bit, then have a look in PC's Device Manager, if your UNIVERSAL was recognised and it should be listed within USB devices as HTC USB Sync or similar.
If so, then do a reflash one more time.
good luck
buzz

Hi ZODI,
you'd better kill ActiveSync all the way down, by using windows task manager.
- disconnect your UNIVERSAL
- kill wcescomm.exe process on your PC
- connect your UNI again and wait a bit
- check if display shows USB at the top of the screen
- in PC's Device Manager check, if the device driver (HTC USB Sync) was loaded
If all done, proceed and do a ROM REFLASH.
If not, you may also check at http://buzzdev.net/list.php?40 mainly those two sticky posts at the top.
good luck
buzz

Ok giving it a try ....hope it works this time and thanks.

ZODI said:
Ok giving it a try ....hope it works this time and thanks.
Click to expand...
Click to collapse
Ok as i said i tried everything and made it to connect somehow and i was able to follow the method as shown but as it said it should reboot...it didnt reboot.

ZODI said:
Ok as i said i tried everything and made it to connect somehow and i was able to follow the method as shown but as it said it should reboot...it didnt boot.
Click to expand...
Click to collapse
I think i am gonna have find a Service centre and spend huge amount of my pocket money in just getting my phone to work

OMG .... i DID IT !!!!!!!!!!!! omg thanks guys i love you all
Love ya buzz from the bottom of my heart THANKS BRO !!!! and each and everyone of ya <3

How-to: Root the HTC Evo 4G

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
High-end Android phones are pretty damn awesome by themselves. But there’s always a little magic to be had by rooting. For those that are fearless and throw caution to the wind, hop on inside for the quick and relatively painless list of what you need and how to do it…
Let the rooting begin…
1. Download this file — PC36IMG.zip — and copy it to the root of your SD card.
2. Turn off phone. Then power back on holding the power and volume button. **If the PC36IMG files was placed correctly and you successfully booted into the bootloader, you should see text appearing on the screen as the phone automatically checks said file.
3. At the prompt to install the image(s), select “Yes”.
4. Reboot
5. Delete or rename the PC36IMG file so that it won’t automatically try to install it again the next time you venture into bootloader land.
And that’s that. Not nearly as hard or involved as some of the earlier HTC Android devices. EVO 4G owners should try it out and let us know how it goes.

fazzy said:
High-end Android phones are pretty damn awesome by themselves. But there’s always a little magic to be had by rooting. For those that are fearless and throw caution to the wind, hop on inside for the quick and relatively painless list of what you need and how to do it…
Let the rooting begin…
1. Download this file — PC36IMG.zip — and copy it to the root of your SD card.
2. Turn off phone. Then power back on holding the power and volume button. **If the PC36IMG files was placed correctly and you successfully booted into the bootloader, you should see text appearing on the screen as the phone automatically checks said file.
3. At the prompt to install the image(s), select “Yes”.
4. Reboot
5. Delete or rename the PC36IMG file so that it won’t automatically try to install it again the next time you venture into bootloader land.
And that’s that. Not nearly as hard or involved as some of the earlier HTC Android devices. EVO 4G owners should try it out and let us know how it goes.
Click to expand...
Click to collapse
Wow here you put it a lot more easier than HERE
What about the boot in recovery part, is that necessary?
http://forum.xda-developers.com/showthread.php?t=690762

mikevillarroel said:
Wow here you put it a lot more easier than HERE
What about the boot in recovery part, is that necessary?
http://forum.xda-developers.com/showthread.php?t=690762
Click to expand...
Click to collapse
Only if you're interested in installing a custom ROM or making a Nandroid backup.

pingpongboss said:
Only if you're interested in installing a custom ROM or making a Nandroid backup.
Click to expand...
Click to collapse
i think thats the main idea of rooting your phone in the first place.

Do you really have to post this in every forum?
That is what the development forum is for. Please delete your threads.

pingpongboss said:
Only if you're interested in installing a custom ROM or making a Nandroid backup.
Click to expand...
Click to collapse
YoungAceAtlanta said:
i think thats the main idea of rooting your phone in the first place.
Click to expand...
Click to collapse
ok, then i need to do evething, and when a custom rom is released i just need to do this part?:
- to flash a custom rom put the rom on the root of your sdcard. wipe data, dalvic cache and chose the option to flash update.zip from sdcard..
Click to expand...
Click to collapse

So rooting like this will still give me SU controls, meaning I can use SetCpu? But still with the stock 2.1 sense?

Question about rooting!
1. How do I get Sprint apps back after rooting (such as Sprint TV, Sprint Nav etc.) or are they part of the ROM?
2. How do I backup my phone before rooting? In case I have to return I am sure I will have to unroot it! Is this possible?

[Q] my tatoo locked,i cant access any thing!

hi guys
i have some problems on my friends htc tatoo
i dont know what he didi,but the phone locked after start up and wanted to sign in whit my google account to unlock!
but i cant access setting to set connection setting for internet
and icant connect with wi-fi network because the phon is lock and i cant turn wi-fi on!
i cant acces recovery menu because the phone wasent rooted and flashed any recovery menu
no nandroid back up exist!
so my friends tatoo just turn on and off and i cant do any thing with it!
even i cant change the rom
if somebody knows please guide me
thanks all
pictures :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
note : in pictures the simcard wsent inserted ,but if i insert the simcard, its still the same!

I have exactly the same problem - with a friends HTC Tattoo.
I even tried factory reset (while phone is off - press Menu+Back+TurnOn) but nothing happens.

You can flash the official rom again if you cannot wipe. Running the RUU utility, take the rom.zip from user's temp folder and rename it to CLIKIMG.zip
Then copy it to root of sdcard and reboot to fastboot. I don't remember the key compinations, but you can find them if you search the stickies of this forum.

ikenny said:
I have exactly the same problem - with a friends HTC Tattoo.
I even tried factory reset (while phone is off - press Menu+Back+TurnOn) but nothing happens.
Click to expand...
Click to collapse
i done it for now,and the screen lights is on and off repetitive and it takes until i pushed the buttons,then when i release the menu+back keys,the phone boots and still the same problem
dancer_69 said:
You can flash the official rom again if you cannot wipe. Running the RUU utility, take the rom.zip from user's temp folder and rename it to CLIKIMG.zip
Then copy it to root of sdcard and reboot to fastboot. I don't remember the key compinations, but you can find them if you search the stickies of this forum.
Click to expand...
Click to collapse
how can i runnig ruu utulity? from pc?
where can i finde ruu?
thanks
edit:
i found some RUU from link blow:
http://shipped-roms.com/shipped/Click/
but i dont know which one must be downloaded!
i know it must be asia version,but which asia?!!
on more thing :
this is a exe file,how can i copy it in sdcard and run it?
i searched many topics,but cant finde fastboot guidance
please guide me my friend

I can't help you if you don't know what rom you have. You can try them though, if is they aren't suitable the didn't flash.
You must run RUU utility from pc, and will extract the rom.zip file in your temp folder.
You can access fastboot if you power off the device and hold volume down and power button. After that in fastboot you can flash the rom pushing the volume down key.

dancer_69 said:
I can't help you if you don't know what rom you have. You can try them though, if is they aren't suitable the didn't flash.
You must run RUU utility from pc, and will extract the rom.zip file in your temp folder.
You can access fastboot if you power off the device and hold volume down and power button. After that in fastboot you can flash the rom pushing the volume down key.
Click to expand...
Click to collapse
thanks my dear friend
going to test it....

finaly the phone lock is opened
HDRAGON said:
thanks my dear friend
going to test it....
Click to expand...
Click to collapse
i tried the version RUU_Click_HTC_Asia_WWE_SEA_1.67.728.8_release_signed_NoDriver
from the link in my previouse post,
nothing was extarcted ! its begining to update rom just from pc to phone!
i installed htc synce for android devices it first and fortunately the phone was found by pc!during it was in lock screen!
i did run the update file and its begining to flash the phone
atlast the phone flashed and the new version startig up
special thanks to dancer_69, my dear friend for his guidance

Problems unrooting...

Hi folks.
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
The problem is, I keep getting the below error message every time I run the RUU.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm using:
Windows XP Professional (SP3)
HBOOT drivers installed
HTC Sync uninstalled (registry clean has been carried out)
Correct RRU (UK TMOBILE) downloaded
Phone set to Disk Drive AND Sync (without software on there).
The current ROM is MoDaCo's 2.1 Stock build.
Has anyone else had this problem who can give me a heads up? It's starting to get on my nerves as I just want normal FroYo.
If no one has a solution, can someone provide the stock UK TMOBILE 2.1 Eclair ROM that I can flash with instead?
Thanks in advance,
Mark

Markerton said:
I'm trying to unroot my Wildfire in order to get the OTA update of the official FroYo release.
Click to expand...
Click to collapse
Flash the RUU for Froyo...instead using 2.1...
Markerton said:
Phone set to Disk Drive AND Sync (without software on there).
Click to expand...
Click to collapse
Phone must be set to "charge only" and enable USB debugging...

gimj01 said:
Flash the RUU for Froyo...instead using 2.1...
Phone must be set to " charge only" and enable USB debugging...
Click to expand...
Click to collapse
USB debugging is activated.
And I'm trying to flash the T-Mobile 2.1 RRU, which is where I get the error.
::EDIT::
When I use the RUU for the unbranded 2.2 then I don't get the above error ... I get error 131 - Customer ID Error.

Bump to the top...
...would really like some help, folks. I know I'm being pushy, rude, and other things, but surely someone's come across this before?!

You don't have to put your phone in disk drive mode...did you check?

I've tried it in Charge Only, Disk Drive and Sync.

It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...

gimj01 said:
It seems to be a system error...in my opinion if you run that RUU in any other computer will be ok...
Click to expand...
Click to collapse
Please don't take this the wrong way - but if that's the advice you're going to give me after one day then I'd prefer you to not post.
If you could READ my original post, I've tried it on Windows XP Professional (SP3) and Windows 7 Professional (x64).
NEITHER worked.

Sorry...I did'n notice that you tried 2 different systems...I can't find this in your post...

I had the same problem. The RUU installation file did not download completely. Compare the file size on your computer and on the shipped roms website.
I think this will solve your problem.

If you bother to search instead of needlessy bumping your own thread and snapping at people who are trying to help you would of discovered by now that the 131 error code is related to the gold card.

Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App

Markerton said:
Yes, I noticed that it was due to it not downloading correctly.
However, my problem thickens...
I'm trying to flash the T-Mobile RUU from Shipped-ROMS, but now it's displaying error 140. This is because my recovery is of a different version (or something).
Any ideas? I can't use the GoldCard method as I don't have a Micro SD adapter.
And sorry for snapping at that poor bloke - I realised that that was completely out of order. So, if you're reading this, please accept my apology:
Sorry, fella.
Thanks in advance,
Mark
Sent from my HTC Wildfire using XDA App
Click to expand...
Click to collapse
ive got a similar thread http://forum.xda-developers.com/showthread.php?t=881277 not one damn reponse.. AAAAARRRRGH! ive searched and found a couple of things that dont work would be nice if someone took the time

[6039x] Install TWRP easily even if you are with your phone to the latest version

(btw im quite noob at this, i just found that as a solution to the problem. btw, sorry for bad english, im 2sleepy and trying to help)
1st: if you break your phone, dont blame it on me. i have done it and it gets tottaly worth it, just sharing knowledge
so have a nice tutorial
So, im Bernardo, from Brazil and 'bout somedays ago ive been trying to install TWRP.
Apparently my ADB-Drivers didnt get totally recognized and it made it impossible.
Oh, almost forgot, you certainly will need a rooted phone. I've used KingRoot, you can find it here. Its an one-touch-apk root. Try it one or two times. It is pretty simple.
Okay, lets go and solve this **** off. Youll need an apk and an image. Just it. Ill use Rashr, but maybe it isnt the better. I dont really know. It just work it out. You can find at Play Store
Fine. Now you have the app to install your custom recovery. But... youll need the custom recovery. Easy too. Youll find the .img right here (big thanks to petrov.0 for the img!)
Okay, now move it to your phone sd\internal storage. Easy too.
Fine, the most difficult steps are in here. Believe me. Open the Rashr and youll find something like that:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok, so, click in your first option, it maybe its like: Choose image of Recovery, idk, im using in Portuguese.
Then, you should find a menu just like this one:
Okay. Before you search for your img, make yourslef confortable with this app. I dont know why this hasnt a confirmation of what you're doing. So, take extra care. Lets go on.
Find and click in your .img (that you've downloaded from petrov.0 topic, another thanks m8)
And nooooow..... You should have it flashed. Reboot it on recovery (4th option).
Its just that. And this is how you enter in recovery mode:
Turn off the device
Press and hold Volume UP key + Power Key about 10 seconds
Release all key when you see Android System Recovery
Use touch to control... everything.
If you like it, pls like it and the petrov.0 post too.
So, i hope that it help you guys. Thanks for petrov.0 again and some friends that help me with it. Sorry for bad english again, its my first post though.
Good luck.
Seeya soon.

you can do it without kingroot and without any other voodoo magic, it takes about 2 minutes
http://forum.xda-developers.com/idol-3/development/6039-guide-how-to-return-fastboot-t3201077

Thanks for people who don't have windows pc...
I'll try it soon !

jani0417 said:
you can do it without kingroot and without any other voodoo magic, it takes about 2 minutes
http://forum.xda-developers.com/idol-3/development/6039-guide-how-to-return-fastboot-t3201077
Click to expand...
Click to collapse
Not totally sure in my case, bro. I have the 6039J and dunno if it works. But thanks anyway