For some reasons, I am having problems connecting to their GPRS server when the connection bars are full(4 bars on the phone). I am using the MDA with cingular service, but I am sure the settings are correct. I've even installed a 8125 rom and used it's settings..
I live in houston, and work a few miles from basicly it's business center, and a few more miles from downtown. Cingular has excelent coverage in my area, all Edge, and G3 is also availiable.
The problem is that I am having no problems with the phone side, but the internet keeps disconnecting or not reading at all? How can this be? Aren't they on the same band? I have to "search for network" in the phone settings to get GPRS to connect, but then the internet will only work for a few minutes and stop working again. The E symbol with the transfer animation is still there, through the animation is not active, meaning the phone is connected right? So why isn't my internet working? I am really at a lost of what to do.,
Is this a problem with mobile internet or is it my phone?
The bars only tell you something about the carrier.
So the carrier is good, it doesn't mean the GPRS/UMTS in working properly.
You still can face problems like no IP-adres, Gateway, DNS etc.
Occasionally I have the same probs in Holland, but then I disconnect/reconnect is sufficient to resolve the problem.
(disconnect by holding the "end call" button for a couple of seconds.
Maybe you have some interference in the neighbourhood?
Try another part of town, if that doesn't help, visit a service center and see if they have a device that can connect normally.
Or maybe you know somebody with a working Universal to test at your place?
If there was an interferencem would it only affect certain carriers or all GSM carriers?
Also, the holding the end call button doesn't seem to work in disconnecting and reconnecting?
Hey there,
Since a few days I've had this problem that my xperia connects itself to the 3g/hsdpa network for no reason.
At first I thought who cares but then I thought about my battery.. in other words, does having your xperia phone being connected to a 3g/hsdpa network lower your battery time?
And if it does, is there anyway I can make it so it doesn't connect by itself but only when I start up opera or any other application that might use the connection?
I have an orange HD unlocked phone that I am using on Vodafone UK.
Even with a good 3G signal the phone will close the 3G connection for any kind of data transfers.
If I am sent an MMS while in 3G coverage I am prompted that it needs to drop the connection and make a new one to be able to recieve the message.
Any idea's whats wrong.
I have used the Touch Pro settings as Vodafone do not have specific settings for this phone.
mine does that too it's because the phone company use a different apn for internet and mms
so basically I may live in a 3G area but I can never use it.
same problem here, its actually verry annoying because my while using wifi, and browsing inet i dont receave any sms or mms or call, for everyone my phone is like offline, then sometimes wifi drps and im starting to receave all sms togeter and in the same time wifi turns off and browser starts using gprs instead wifi even if wifi is reconnected, and then im starting to pay for my proveder... sux.
Hey all,
Done some searching but cant find a clear and striaght forward answer.
Bascially, on my old HTC Dream (Android) wifi would always be searching for a wifi to connect to (and if it found a network, it would tell me). if it was a network it had acess to, then it would automatically connect.
Otherwise, it would just use my contract internet.
So I was wondering, on the HD2, you always have to manually turn wifi on. Then say I leave the house, manually turn it off for it to connect to the contract internet.
Pretty small thing - but it gets annoying after a while.
Is there a way (reg edit or app) to make wifi do the same as the android did?
Thanks!
Bump.
I am interested in this too. I am trying to assemble a Mortscript to do it.
would be so helpfull.
I have my home network, Uni network and girlfriends that I can connect to. Now having to manually connect each time, and then disconnect from wifi when I leave is pretty annoying
Oo Alias oO said:
Hey all,
Done some searching but cant find a clear and striaght forward answer.
Bascially, on my old HTC Dream (Android) wifi would always be searching for a wifi to connect to (and if it found a network, it would tell me). if it was a network it had acess to, then it would automatically connect.
Otherwise, it would just use my contract internet.
So I was wondering, on the HD2, you always have to manually turn wifi on. Then say I leave the house, manually turn it off for it to connect to the contract internet.
Pretty small thing - but it gets annoying after a while.
Is there a way (reg edit or app) to make wifi do the same as the android did?
Thanks!
Click to expand...
Click to collapse
This must be a rom issue. What ROM are you using?
My HD2 Wifi will connect automatically to networks I have connected it to before, it will notifiy me of available wifi, it will use cell data when wifi is not connected. Works to me the same as how you described your HTC Dream.
Just the stock one that comes with the phone.
to make my point slightly clearer...
I am at home with my Wifi turned on and connected.
I leave my house and go outside of the wifi range.
My phone still has the wifi icon at the top, but it wont be connected.
Therefore I have to turn wifi off to let it connect to my contract internet.
Maybe Wefi will solve that problem?
On Symbian worked very well.
Mike
sdhfjmhsdhfghj
I shall look into this, cant belive others dont get annoyed at it tbh
I'd like a solution to this too. I have found it annoying since settings my HD2. I haven't had any success with the solutions suggested in the forum to date.
actually guys.. there is another thing.. how about a cab that would force HD2 to open WIFI automtically to update weather/facebook..etc... whenever the any apps needs updating, then shutting the WIFI automatically off instead of trying to connect to 3g. you guys think its possible?
Mine always lets me know when I can connect to wifi.
Guys theirs does too. You dont get what they want.
When wifi is turned on it will search and connect only to wifi. It will not connect to wireless network of provider. So they want a program that would turn wifi off (which would let HD2 to connect to EDGE and 3G) if there was no place to connect to. And it would turn wifi connection back on (dissable 3G and EDGE) when there would be a wifi network to connect into. You get it now? It would neeed quite sophisticated program to switch betwen those two modes.
I dont use Providers network (3G, EDGE) but would like program that would check for avaible WIFI networks that I have access to and Connect to them to get updates (it would check for example every 10min) and connect to it only to get updates and SYNCH. then disconect and wait cca 4hours to start looking for wifis in 10min intervals. Would be nice =)
KowboyBebop said:
Guys theirs does too. You dont get what they want.
When wifi is turned on it will search and connect only to wifi. It will not connect to wireless network of provider.
Click to expand...
Click to collapse
Then it must depend on the ROM version, but for me it works exactly how he wants, and always has. I never turn Wifi off. If I'm at home within my wifi range and load a webpage, it loads it through wifi. If I walk away, wifi connection gets lost, and I press a link, it will load it with the data connection straight away. If I walk back home or to another place where a known wifi is present, wifi reconnects by itself.
Hey forum,
i go away from home and i have no more wifi connection.
Then i suddenly get a connection to mobile internet (EPlus) first.
As i am in an area without a connection and i come back to EPlus, i can use my phone for telephone and SMS but i get no internet connection automatically.
I must use the airplane-mode to totally logoff and 5 sec later go out of airplane-mode. In this way i get the internet connection back.
My wife has the same problem with Incredible S and GingerSense 1.3.
Is this maybe a problem of EPlus? Or is there anyone with tve same problem and another provider?
Andreas
Perhaps it's your wifi giviing you problems, going bad.
Sent from a dream.
If the signal of your provider (in this case Eplus) is weak, it might not find it right away.
Also, try going into Settings>Wireless settings then under Network mode, check if it says GSM/WCDMA
This setting will try to connect to 2G or 3G whichever has the strongest signal, however if both are available, 3G will be selected.