Hi,
I have a question and I can't find the answer anywhere.
I just flashed my phone to OzROM 2.40 (21901) when I use active sync it syncs only my past appointments. No future appointments, recuring appointments, contacts and mails are synced?
I thought maybe is was my radio so I went back from 2.10.50.19_2 to 2.10.50.08_2 this doesn't do the trick.
I flashed back to my previous ROM (L26LEOV1.1_GoldEdition_177_WWE_21899), that didn't help also. Both times did a hard reset after the flash but now luck.
Who can point me in the right direction? I puzzled? Before everything worked ok.
SkywalkerPD said:
Hi,
I have a question and I can't find the answer anywhere.
I just flashed my phone to OzROM 2.40 (21901) when I use active sync it syncs only my past appointments. No future appointments, recuring appointments, contacts and mails are synced?
I thought maybe is was my radio so I went back from 2.10.50.19_2 to 2.10.50.08_2 this doesn't do the trick.
I flashed back to my previous ROM (L26LEOV1.1_GoldEdition_177_WWE_21899), that didn't help also. Both times did a hard reset after the flash but now luck.
Who can point me in the right direction? I puzzled? Before everything worked ok.
Click to expand...
Click to collapse
Try checking the options on the PCs ActiveSync -> Options ->Calendar ->settings
(Or something like this, I dont remember exactly)
Som30ne said:
Try checking the options on the PCs ActiveSync -> Options ->Calendar ->settings
(Or something like this, I dont remember exactly)
Click to expand...
Click to collapse
Thnx for replying! I checked all the settings I could find. I don't use activesync on the PC. I can connect to the exchange server directly with my mobile. All worked fine until I upgraded this morning.
I went back to the ROM and radio I had before and now those won't work either...:-(
I'm desperate because I need my work e-mail and contactlist on my phone.
It's getting stranger and stranger. I can see holidays in my agenda I can see some (by far not all) of my appointments?
Just formated with Task29. After that went to the bootloader installed a fresh ROM. (OzROM_245_23563)
Still no active sync. No error, just doesn't download anything to my HD2.....
Try uninstalling ActiveSync. Then go to Explorer and manually delete ActiveSync directory. Then install ActiveSync again. It might work again. I had this problem once.
dio62000 said:
Try uninstalling ActiveSync. Then go to Explorer and manually delete ActiveSync directory. Then install ActiveSync again. It might work again. I had this problem once.
Click to expand...
Click to collapse
Hmm, I'm having this problem, too, so I want to try your solution. I must ask though, after deleting/uninstalling ActiveSync, where would I find it again to reinstall?
Any help? All I need is a quick reply that tells me how I can go about reinstalling activesync.
dio62000 said:
Try uninstalling ActiveSync. Then go to Explorer and manually delete ActiveSync directory. Then install ActiveSync again. It might work again. I had this problem once.
Click to expand...
Click to collapse
I don't use activesync on the PC, I sync with our Exchange server directly.
ActiveSync (note: for XP!)
http://www.microsoft.com/windowsmobile/nl-nl/downloads/microsoft/activesync-download.mspx
SkywalkerPD said:
I don't use activesync on the PC, I sync with our Exchange server directly.
Click to expand...
Click to collapse
Sorry, don't know anything about Exchange. I only know an option 'exchange' appears in ActiveSync when Pushmail on the HD2 is active.
Related
Hi to all,
I have a very strange problem with the connection with activesync.
When i got the Qtek 2020, i was able to syncronise on the USB cradle easily.
After some time i decided to connect via bluetooth.
No problems there!
Activesync is working excellent via bluetooth!
But..
Now i cannot connect via USB !!!!!
I tried a fresh install on another PC of activesync (even the new version from MS), but nothing! The activesync icon is always grey! it cannot connect.
Windows find the USB cradle and the PPC OK, but nothing more.
The cradle and the PPC port must be working because i see that the battery is charging when i have it cradled.
In the PPC settings options--options i have the USB selected.
Any ideas??
TIA
try running
\windows\repllig.exe
and then put the device in the cradle
Rudegar said:
try running
\windows\repllig.exe
and then put the device in the cradle
Click to expand...
Click to collapse
Thank you for your answer,
u mean the repllog.exe file?
I will try that ok!
Rudegar said:
try running
\windows\repllig.exe
and then put the device in the cradle
Click to expand...
Click to collapse
I run repllog.exe couple of times on the cradle and it Worked !!!!!!!!!!!
Thank you very much!!!
lads
i have had a similar problem and was pointed towards this topic.im excited that i will be able to use all the functions fo the phone again.
i just dont know how to run this exe.where is it and how do i run it and what happens when i run it
cheers in advance
zag
still looking for help set this up,
how do i run it please
rob
this forum is fairly disappointing , i was told advise was easy to get.
is there any one who will help me sync my xda please
rob
If you look at Rudegears reply you will see that the file is in the windows directory.
Sorry for hijacking, but I also have a problem with ActiveSync.
I previously used WM2003SE ROM2.06 (the one modified by ZeroExtreme). Then I took the plunge coz I couldn't resist trying out WM2005. The upgrade went fine, but then ActiveSync started acting weird. It synchronizes, but it stays minimized, no matter what I do. When I right-click on the taskbar tray (BTW I'm running WinXP SP2) and click on "open activesync", it opens, but again, stays minimized so I cannot get into the options or tools. I got pissed off so I rreverted back using XdA2JoJo and toenailed's Final version (the exe file). The update went fine. Naturally, I removed a ActiveSync 4 and installed AS 3.8 It was installed fine, and it recognizes my device, but it can't sync. It says connected but when I try opening AS it give me nothing. it doesn't even prompt me for a new partnership, even though I already deleted all previous partnerships. When I cchoose to "explore device" by right-clicking the taskbar icon, it gives me like a communication error and tells me to reset my PPC. I did, but still to no avail. I uninstalled and reinstalled AS3.8 and even AS3.7 - same problem. I searched the forum tried running replog.exe on my Xda2, nothing. Tried deleting everything including manually uninstalling AS by deleting its registry files - same problem. When I install AS4, it synchronizes alright, but again, AS4 won't open, it just stays minimized.
Sorry for a very long first post, and thank you for bearing with me. Please help me guys. Thanks in advance!
I had a similar problem. the answer:
Re-install activesync 4 WITHOUT the cradle or usb cable attached to the computer. plug it all in after the installation.
hope that helps.
Darrell said:
Sorry for hijacking, but I also have a problem with ActiveSync.
I previously used WM2003SE ROM2.06 (the one modified by ZeroExtreme). Then I took the plunge coz I couldn't resist trying out WM2005. The upgrade went fine, but then ActiveSync started acting weird. It synchronizes, but it stays minimized, no matter what I do. When I right-click on the taskbar tray (BTW I'm running WinXP SP2) and click on "open activesync", it opens, but again, stays minimized so I cannot get into the options or tools. I got pissed off so I rreverted back using XdA2JoJo and toenailed's Final version (the exe file). The update went fine. Naturally, I removed a ActiveSync 4 and installed AS 3.8 It was installed fine, and it recognizes my device, but it can't sync. It says connected but when I try opening AS it give me nothing. it doesn't even prompt me for a new partnership, even though I already deleted all previous partnerships. When I cchoose to "explore device" by right-clicking the taskbar icon, it gives me like a communication error and tells me to reset my PPC. I did, but still to no avail. I uninstalled and reinstalled AS3.8 and even AS3.7 - same problem. I searched the forum tried running replog.exe on my Xda2, nothing. Tried deleting everything including manually uninstalling AS by deleting its registry files - same problem. When I install AS4, it synchronizes alright, but again, AS4 won't open, it just stays minimized.
Sorry for a very long first post, and thank you for bearing with me. Please help me guys. Thanks in advance!
Click to expand...
Click to collapse
I also have this kind of problem ... anyone can help ??? I want to install activesync 3.8 since I encountered internet pass through problem. TIA.
cruisin-thru said:
If you look at Rudegears reply you will see that the file is in the windows directory.
Click to expand...
Click to collapse
It's not in my Windows folder!
I'm running Windows XP SP2
Activesync 3.8 is very slow... It actually stops responding whenever I dock my device - then starts working after a few minutes!
I thought this might fix my problem, but I can't find the executable anywhere!!!
Not sure what I did or what I installed but I can no longer click the Explore button on the Active Synch toolbar and explore the files within the phone/storage card from my desktop PC...any ideas on what brings back that functionality?
If you've got any software firewalls installed on your PC, including the builtin windows one, then try temporarily disabling it and see if you can Explore you PDA then.
Tried turning off the firewall and no luck...anyone else have an idea?
fozzy_boy said:
Not sure what I did or what I installed but I can no longer click the Explore button on the Active Synch toolbar and explore the files within the phone/storage card from my desktop PC...any ideas on what brings back that functionality?
Click to expand...
Click to collapse
Try reinstall activesync on your pc.
Last time I have this problem with activesync v4.1. I install activesync v4.2 beta, and problem solved.
Regards,
Arto.
Although it was working with RC2, strangely, it doesn't with RTM, the driver is installed but only the file transfere is working. I can see an icon of my JJ in computer (ex. my computer) and when click on it, i can browse the JJ ram and the storage card only, but there is no any syncing capabilities. Any one has an idea about that problem. May i am going to try the old RC1 trick:
http://www.microsoft.com/downloads/...roductID=7C1FA894-B2C5-41BE-8D97-E145DD2A883B
Still there is no respoonse after 26 viewers, does this mean that there is no one has installed the new vista RTM release or I am asking a selly question?
_____________________________________
JJ with AKU 3.2 1.90.96
Yes, I synced my HERMES with http://www.microsoft.com/downloads/...6a-a72d-4aef-9663-31ce2fefbada&DisplayLang=en this tool, but sometimes don't, lot of crashes...
Just have a try:
disable any Anti-Virus and Firewall softwares.
I tried downloading the sync tools beta, but fiind it hangs outlook (2007).
I'm going to give it a try just running wirelessly and see how I get on.
The same don't know why it's not working...
sergiopi said:
Yes, I synced my HERMES with http://www.microsoft.com/downloads/...6a-a72d-4aef-9663-31ce2fefbada&DisplayLang=en this tool, but sometimes don't, lot of crashes...
Click to expand...
Click to collapse
I tried it, it worked, thanks. The difference is that i followed the trick mentioned above also, i added the registery key WHOS, then installed the WMDC beta program, so, will try to use the WMDC program only without the registery in another installation.
Now I sync 95% of times, I just unchecked in settings-> connections->USB to PC-> use enhanced USB
I have managed to get it working after having reflashed the rom on my phone (probably not required) and re-installing the Windows Mobile Device Centre beta 3.
I think the trick is to make sure your phone can connect to Vista OK before you install the WMDC software and then install the software with the phone connected.
Good luck
Are you also able to flash / upgrade the phone using Vista RTM and MDC beta 3? I'm not
Hi All,
Newbie, bad english
After I updated my rom with Molkis 3.2AKU 3.0.0.0, I can't synchronize contacts from Outlook with my device, just Appoinments, tasks... Any suggestions?
Thanks
Similar thing happen to me. I didn't have the latest version of Activesync so when I upgraded that it worked fine.
I tried to install Activesync 4.5 Beta, still no results. I just loose about 400 contacts with more than 2 fields. Anything else? Pls help. I'm desperate!
same problem with activesync 4.5 beta2.
any help?
Try deleting your device partnership in ActiveSync on your PC, and then plug your device back in to create a new partnership, and make sure the things you wish to sync are ticked.
I am not able to use active sync after doing a WM6 upgrade (I used WM5 before)...
I tried all ROMs available - but ActiveSync doesnt work.
Funny part is - when in cradle I am able to do upgrade, but active sync doesnt work.
Any views / clues
You need the latest version of ActiveSync if you're running WM6.
Yes, I am using the LATEST active sync software in my PC !!!
tried to use bluetooth rather then usb to see if that works?
tried downgrade to WM5, then upgrade to another version of WM6.
Guess what....
I uninstalled Activesync and then reinstalled the same version again...
NOW it works... Nothing more - it works now...
Hope it works for others too
Actually there is no need to reinstall Active Sync, the best way is to delete the device from the activ sync with no device on cradle and then place the devie on cradle.
April 1 said:
Actually there is no need to reinstall Active Sync, the best way is to delete the device from the activ sync with no device on cradle and then place the devie on cradle.
Click to expand...
Click to collapse
I tried this first - but with negative results...
Uninstall & re-install was just a try - and it worked
Uninstall and install
How did you uninstall and reinstall ActiveSync on Windows Mobile? Is there a separate cab available,and if so, where?
WMNovice said:
How did you uninstall and reinstall ActiveSync on Windows Mobile? Is there a separate cab available,and if so, where?
Click to expand...
Click to collapse
He is talking about uninstalling on PC, not on mobile.
April 1 said:
He is talking about uninstalling on PC, not on mobile.
Click to expand...
Click to collapse
Thanks right... Uninstall the ActiveSync and re-install it. Dont forget to restart your PC... and try to SYNC - it could work then
Restarting WMDC
Another option, less painful than uninstalling, is killing the wmdc.exe process in Task Manager and restarting the Windows Mobile Device Center. Works very often.