Back cover loose? - HD2 General

I'm getting a creaking sound on the bottom left corner near the usb port if i push on it?
Anyone else has this or something else similar?

Same here - just discovered a couple days ago. Think is pretty minor small gap between the screen and the case - plastic must be super thin and it just bends a little making the sound. Wouldn't return it because you could get something even worse - dead pixels or stuck pixels - alignment issues - etc. They should have made the frame out of metal to elimate any flex.
As soon as a decent case is finally available for the TMOBILE version it will mask it.

goldt said:
I'm getting a creaking sound on the bottom left corner near the usb port if i push on it?
Anyone else has this or something else similar?
Click to expand...
Click to collapse
I have the opposite problem. Well, maybe I shouldn't call it a problem because I would rather have it tight then loose. My back cover is on so tight I end up tearing my thumb up trying to remove it. It is to the point where I avoid removing the cover at all costs. No play at all, just tight as heck.

I noticed the more you remove it the looser it gets so maybe try doing that a couple of times.

stim141 said:
They should have made the frame out of metal to elimate any flex.
Click to expand...
Click to collapse
The USA version isn't metal? mine (europe) is only metal and glass... well except for the harware buttons, they are plastic.
is it also true that the bottom is thicker than the euro version? where the USB port is, i looked at some photos, and it looks much thicker..

Only the battery cover is metal, everything else is not, feels like rubber i guess and i wouldn't say its thicker if it is not by much the phone is extremely thin.

goldt said:
Only the battery cover is metal, everything else is not, feels like rubber i guess and i wouldn't say its thicker if it is not by much the phone is extremely thin.
Click to expand...
Click to collapse
It's metal coated in rubber - at least that what it feels like. When I get my replacement phone I'll scratch a little of the rubber off mine and see what's under it.

TIGGAH said:
It's metal coated in rubber - at least that what it feels like. When I get my replacement phone I'll scratch a little of the rubber off mine and see what's under it.
Click to expand...
Click to collapse
Great, post it here please when you get it

mine made a creaking noise down at the bottom, pretty much dead center, like the plastic (?) cover was a tiny bit loose. my guess is it would only get worse over time...only a guess though

goldt said:
Only the battery cover is metal, everything else is not, feels like rubber i guess and i wouldn't say its thicker if it is not by much the phone is extremely thin.
Click to expand...
Click to collapse
yes, its coated with a special layer for grip... at least the euro version is!
i read this somewhere, maybe the htc website? or a review..

I just recently noticed the noise on my bottom right side.

Related

Front Bezel (Real or Fake Aluminum)

I know its vain... but I scratched on the bezel of my 8525 the first day I bought it and staring at it is really starting to annoy me. Its the bezel part that starts above the call buttons and goes up the right side and then along the top.
Does anyone know if it is made from real brushed aluminum or is it plastic made to look like brushed aluminum? If its real, I'm going to dremel the scratch away... if its plastic and I try doing that... it will only make it much worse.
Thanks for any help on this.
EDIT: Does anyone have a dead 8525 or even just the front part they want to get rid of for cheap? I figure I could replace the bezel as well. Thanks again.
I'm not sure how does the fake plastic goes, but aluminum is a electric conductor, you can try and see if it gets electric passed through it? Still, fake plastic may be a conductor as well (i.e. uses aluminum powder to make it shiny). Anyway, if it was to be aluminum, it should be cold to the touch.
BTW, when you said "dremel the scratch away", how do you do that? I had a big one on my Wizard too, it is definitely aluminum here. Also, I have an old SStell watch that I would like to get the scratch off
Sure feels like METAL. One thing to fix smaller scratches on metal, try eraser for ink, it's slightly abrasive.
hanmin said:
I'm not sure how does the fake plastic goes, but aluminum is a electric conductor, you can try and see if it gets electric passed through it? Still, fake plastic may be a conductor as well (i.e. uses aluminum powder to make it shiny). Anyway, if it was to be aluminum, it should be cold to the touch.
BTW, when you said "dremel the scratch away", how do you do that? I had a big one on my Wizard too, it is definitely aluminum here. Also, I have an old SStell watch that I would like to get the scratch off
Click to expand...
Click to collapse
I am fairly skillful with a dremel. I was thinking I would us a fine grained dremel brush and brush along the grain. Basically, it would be recessing that part of the bezel down to the depth of the scratch (it is uneven new and the scratch is located at a slightly elevated position which would be perfect for this). This would only work for slight scratches.
I know this
It dents like aluminum. I dropped mine last winter, and it put some scratches and dents int it... well the dents curve into the hole, which plastic would just shear and have a grooved edge, it wouldn't bend. So My vote is metal.
jompao said:
Sure feels like METAL. One thing to fix smaller scratches on metal, try eraser for ink, it's slightly abrasive.
Click to expand...
Click to collapse
I hunting for an erasable ink pen right now. Thanks.
tsunami982 said:
I hunting for an erasable ink pen right now. Thanks.
Click to expand...
Click to collapse
People use it to take care of small scratches on fine watches, so I'm guessing it will work here to. Obviously you need to use it direction of the "brushed" direction of the metal.
You can stumble on interesting stuf on the net.
I 've read people were removing branding from phones with a sugar cube. Abrasive enough to remove screen printed branding but not enough to scratch the plastic. Not to say that trick will work on Hermes.

Anyone else notice that the battery cover doubles as a case?

The battery cover is really unique on the device in that is covers alot of the device, especially the parts that are prone to dents and scratches when dropped. If you drop it and hopefully if it doesnt land on the screen side all you really have to do is replace the back cover for probably really cheap (less than $10 i'd imagine on ebay) and you are back to square one! Nice idea motorola! I hope it was intentional.
I think Engadget said the screen was gorilla glass. It shouldn't have any effect if you drop it.
tassadar898 said:
The battery cover is really unique on the device in that is covers alot of the device, especially the parts that are prone to dents and scratches when dropped. If you drop it and hopefully if it doesnt land on the screen side all you really have to do is replace the back cover for probably really cheap (less than $10 i'd imagine on ebay) and you are back to square one! Nice idea motorola! I hope it was intentional.
Click to expand...
Click to collapse
pfaction said:
I think Engadget said the screen was gorilla glass. It shouldn't have any effect if you drop it.
Click to expand...
Click to collapse
:facepalm:
The battery cover is NOT a case - its a battery cover
Dropping any phone with gorilla glass and having it land on the screen can and most likely will break/shatter the screen - its NOT indestructable... it will even scratch.
scratch proof does not mean shock proof.
if the material is harder, it may be scratch proof. In addition, the stiffness is also increased, so the materil is brittle
Hm. Perhaps I was wrong, I saw a video of some guy stabbing a Dell with gorilla glass with a pen and he just wiped the ink off and was still the same.
i agree with the OP... i LOVE the cover design... it rounds around the corner and if ever gets nicked, just get a new battery door.... yeah its kind of a ***** to take off.... but i really dont do that often.... AWESOME battery door design!
you know what, i'd never actually looked at my phone until just now, and i see what you mean. i cant believe i never noticed this
anyone else notice that on a cold day the phone feels like one of those water filoled balloon tubes with a hole in the center and is damn near impossible to move around in one hand without almost juggling it?
AKA: it's damn slippery
art3mis-nyc said:
anyone else notice that on a cold day the phone feels like one of those water filoled balloon tubes with a hole in the center and is damn near impossible to move around in one hand without almost juggling it?
AKA: it's damn slippery
Click to expand...
Click to collapse
YES! I will be investing in a rubberized case of some sort.
Sent from my MB860 using XDA App
Nice description. You mean the water balloon torus? Or if that doesnt help, like a elongated donut.
I haven't had trouble with slippage, but I do note that any bit of moisture or food grease really makes it slick. Just keep your hands clean.
I really like the prospect of battery door designs, as well as its ease of replacement in case of scratches. No entirely new body parts, just one battery door.

Physical Body Build Quality (silver) -- Easily Scratched

I just noticed a few scratches that I'll have to live with.. Maybe I'll have to buy a case now (thought going naked would have been fine)
I know there are plenty of topic on this, but most cover actual defects.
Btw, just wanted to say that I LOVE this device. No way I'm returning. Not even this unit! Can't! Spent soo much time customizing it, and even the benchmarks are slightly above average
Anyway... My problem right now is the chamfered edges and the bottom speaker grill.
The silver One is susceptible to the same amount of scratches as the Black One, albeit they won't be as prominent on the silver variant.
The unit I'm talking about is actually a replacement. The first One I owned had defects, but even for the short time I had it, it somehow managed to build a few dents and scuffs on the chamfered edge up at the top speaker grill.
This time, the problem's on the bottom! I have a few scuffs on the bottom chamfered edge... It's been 4 days in my possession, and already is growing hits and dings. Now here's the interesting part.. As a university student, school's out and the phone has pretty much left the house only once! Other days it laid either in my hand, on my pocket, or on the floor right by my bed.
I looked at it and thought that maybe I can polish them when they get worse.. But things took a turn for the worse right away!! As I was examining the scuffs on the edge, I came across a hairline scratch that extended from the bottom of the lower speaker grill to the top (of the speaker grill) -- almost like a crack -- a hairline crack. Looks as if a pencil lightly went over it.
I've attached photos for your viewing pleasure, but as minor as they appear, note that it's only been about 4 days!! I'm wondering what'll come out of it over an extended period of use.. Guess I can live with whatever has happened to date though =]
*please note that the images aren't too good a representation of the actual damage to the device. It's slightly worse in person -- the abundance of light blurs the scratches a bit.
Arghhh the photos have since showed less of the damage as I had to resize the images to 640* 425 (instead of 4288 * 2848 )
To me, it's just like a dead pixel. You can't tell it's there in normal use, but once you find it, it'll haunt you for a while. At one point you won't care.. But when you see it again, you'll start kicking yourself.
I've been babying my phone, but I think it's time for me to go up onto Amazon and buy myself a good case. *flies to look at the Accessories forum*
Any of you folks keeping your phone naked experience any unexplained scuffs and nicks on your edges? Scratches on your speaker grill?
You guys think that we'd be able to -- at some point -- replace the speaker grills with OEM parts? I'm sure people will come across much worse problems...
No matter what device, what manufacture or what materials the device is made out of, if you don't use a case, this will happen and worst. Your scratches are barely visible. I had to zoom in the picture to see them.
I don't have the device yet but I already have 3 cases for it and a pack of screen protectors. The official flip case and 2 tpu s line cases, one black and one clear.
Sent from my HTC myTouch 4g using xda premium
I agree. I guess it's just that I'm bummed it happened so soon!
I'll learn to live with this. I don;t think I'm ready for a case just yet. The cases I've seen so far don't look too good and add way too much bulk. The slimmer ones don't cover the top and bottom chamfered edges...
I'll keep looking. I do have full body screen protection, except it only covers the screen itself and the rear of the device. Speaker grills (understandably) are left to be in the open
Did you check the phone over when you got it? Just asking as I've seen a one or two with some nicks and scratches out of the box I'm guessing it happened when polishing the chamfered edge.
Man, how do you use your phone to manage to put these scratches and dents.
I have had the phone since last Friday with daily use and no scratches, I just put a skinomi clear film in the back to protect against scratches and dents, the front is naked, looks beautiful, you don't even notice the film is there
Sent from my HTC One using Tapatalk 2
I have films on the back and front of the device myself!
I honestly do not know where these came from. It's been on my desk or on the floor by my bed. Hasn't left the house -- maybe just once..
Anyway I attached another saddening photo. This was taken with my old Atrix.
I'm thinking that this may have been a result of missing the charging port and accidentally sliding the micro usb plug into the front of the phone while I was half asleep...
Anyway, I'm sitting here and there's much greater things to worry about. It could have been much worse... A random scratch on the screen or a deeper nick...
Besides, the bottom speaker grill is a separate piece and if it continues to get scratched up and continues to bother me, I'll just see if i can get it replaced..
Hope I actually move on. This is the same feeling as when I found a dent on my $700 guitar.. I got over that. So ill probably get high over this
Aha I'm wondering what it'll feel like when I find a small scratch on my first new car -_-... Boy will I be a mess!
Sent from my HTC One using xda premium
Aluminum is a soft metal, unlike titanium or other harder metals. They chose aluminum because it is light weight.
So do you think black is more durable? I'm going to buy One today so I might considering buying black instead if thats the case.
Btw usually stratches goes away when wiped properly. At least do on my black One S. Dents, however, stays forever.
muayyadf1 said:
Aluminum is a soft metal, unlike titanium or other harder metals. They chose aluminum because it is light weight.
Click to expand...
Click to collapse
Yep. But I'm hoping that maybe next year they make the switch to a harder metal like steel... The OPPO Find 5 allegedly has a steel frame construction. Sure it's heavy, but if they get the right look, whatever! Durability should be of more importance than weight..
Now if it does weigh too much, maybe implement the steel construction only around certain areas...
I'm aware this will pull up costs, but the device would be that much better!
Dharkan said:
So do you think black is more durable? I'm going to buy One today so I might considering buying black instead if thats the case.
Click to expand...
Click to collapse
There's another thread about scuffs on the black edition. Maybe I've got too far... You can't see this if you're not looking for them, but to me they'll always be there.
I've seen multiple accounts of folks on here see through their black paint into the aluminum underneath.. You'd want to avoid that.. So I don't regret having the silver edition.
They both scratch the same amount, but the black shows more..
Good luck and I hope you enjoy your One just as much as I am!
Choose the device that also to you more! If you like the stealthy black, but that! But if you do, go for the Poetic Atmosphere case.. Looks pretty nice on the black variant.. The silver one.. Not so much.
Still going to look for a case, but it isn't my priority.. I'd rather keep the phone naked and enjoy the cool feel everyone I touch it in the morning!
Dharkan said:
Btw usually stratches goes away when wiped properly. At least do on my black One S. Dents, however, stays forever.
Click to expand...
Click to collapse
I've wipes this, took a moist set of wipes below the actual holes, but nothing. There is a scratch, not a surface scratch, it's slightly deeper.
100% sure this ain't going away.. But i haven't lost all hope! As this phone e grows in popularity, some ebay sellers will manage to get their hands on some grills and they should be replaced rather easily since they're in there only via an adhesive. Would have been more ticked off if it was on the screen, on the chamfered edge off of the back, or even on the back itself..
Here's hoping the grills are replaceable and I can do something about it in maybe 6 months!
Sent from my HTC One using xda premium
I had mine with no case for almost 1 week and not a single scratch
Sent from my HTC One using xda app-developers app
No idea what to say. I'm keeping it naked. Maybe this was from the factory.. I don't see how you can get a scratch from the bottom to the top of a grill without taking your phone out much...
Maybe I didn't notice this before, but i still am worried about the durability of the device. If pocketnow reports bad durability, then I've got no option but to go with a case. Right now i dont even know where these came from.. No sand in my room, no hard metals that would easily scratch anodized aluminum..
It really IS a mystery...
Sent from my HTC One using xda premium
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
hamdir said:
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
Click to expand...
Click to collapse
Tell me about it! When I bought snap on cases for my Atrix, the plastic around the phone was soo scuffed it actually looks nasty without a case. Definitely not making that mistake again!
I don't think tpu or hardshell plastic cases can really damage the aluminum bezel as aluminum is harder..
But it's still something I worry about and a case like the one you linked to is just perfect.
Sent from my HTC One using xda premium
WolfDale7 said:
Tell me about it! When I bought snap on cases for my Atrix, the plastic around the phone was soo scuffed it actually looks nasty without a case. Definitely not making that mistake again!
I don't think tpu or hardshell plastic cases can really damage the aluminum bezel as aluminum is harder..
But it's still something I worry about and a case like the one you linked to is just perfect.
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
it's not the aluminum i'm worried about
hamdir said:
it's not the aluminum i'm worried about
Click to expand...
Click to collapse
Oh Crap. Overlooked that!
Wow..
Kay so time to look for a similar case to the one you've got
I want to keep the beauty of the HTC One visible while still protecting it from further scratches...
Everything over on the accessories forum doesn't really cut it go me :/...
I'll go to this mall that pretty much just sells phone cases and phones. Hopefully I find a store that has what I want for a reasonable price
Sent from my HTC One using xda premium
WolfDale7 said:
I agree. I guess it's just that I'm bummed it happened so soon!
I'll learn to live with this. I don;t think I'm ready for a case just yet. The cases I've seen so far don't look too good and add way too much bulk. The slimmer ones don't cover the top and bottom chamfered edges...
I'll keep looking. I do have full body screen protection, except it only covers the screen itself and the rear of the device. Speaker grills (understandably) are left to be in the open
Click to expand...
Click to collapse
Probably the thinnest, plastic case around. does not add bulk like otter cases do. you should check it out...
http://www.bestbuy.com/site/Platinu...&st=platinum series case htc one m7&cp=1&lp=1
Also, it's aluminum. Whoever thinks aluminum, a softer metal, won't scratch, is lying to themselves.
hamdir said:
yes the part which worries me the most is the possibility of hardshell covers actuall doing damage as you attempt to place them
this is why HTC's own double flip / dip are actually a lot softer to install
this exactly why im sticking to slim transparent rubber covers
Click to expand...
Click to collapse
I feel you but the cheap TPU's will scratch phones too. Only cases I have found to never ever scratch a phone are Otterbox has a combo silicone tpu which is very soft and nonabrasive unlike normal tpu. Capdase Aluminum cases they are soft touch silicone on the inside will never ever scratch. And last my old friend Incipio their double layer cases have a soft touch silicone also that will not scratch the phone.
nullkill said:
I feel you but the cheap TPU's will scratch phones too. Only cases I have found to never ever scratch a phone are Otterbox has a combo silicone tpu which is very soft and nonabrasive unlike normal tpu. Capdase Aluminum cases they are soft touch silicone on the inside will never ever scratch. And last my old friend Incipio their double layer cases have a soft touch silicone also that will not scratch the phone.
Click to expand...
Click to collapse
how will a rubbery cover scratch it? you mean if it falls?
hamdir said:
how will a rubbery cover scratch it? you mean if it falls?
Click to expand...
Click to collapse
No TPU is not rubbery its more like flexible hard plastic. If the case fits well the TPU material will scratch the phone from taking it off putting it back too much. If anything get in between the phone and the case game over it's almost worse than naked. It's sold as rubber like or soft but I have 20 different TPU cases and all are the same crap. Otterbox and the others I mentioned use silicone which is like a soft rubber. TPU is a cheap is injected crappy material that is why you will find cases as low as $5 or lower.

Permanently bent

Hello there,
just bought a used X Style in good condition. However the phone is slightly bent, distorted possibly from heat. So when you put it face down on an even surface as on a table, it actually rocks... One of the things I cannot do now is to actually put a glass protector on its screen as it will not stick.
Anyone with a similar experience ? Is there anyway to rectify the problem apart from buying a new front housing? I can easily open it up and disassemble it but would it offer anything at all?
Thanks for your ideas
axolotl98 said:
Hello there,
just bought a used X Style in good condition. However the phone is slightly bent, distorted possibly from heat. So when you put it face down on an even surface as on a table, it actually rocks... One of the things I cannot do now is to actually put a glass protector on its screen as it will not stick.
Anyone with a similar experience ? Is there anyway to rectify the problem apart from buying a new front housing? I can easily open it up and disassemble it but would it offer anything at all?
Thanks for your ideas
Click to expand...
Click to collapse
Is the back of the phone slightly curved from bottom to top, thicker in the middle? This is not bent, this is design.
Are the edges of the screen slightly higher than the rest of the screen? This is normal, it's a huge piss off, but it's normal. Research glass screen protectors moto x pure and you'll find that there are very few which stick to the moto x, let alone stick well. My guess is the phone is not actually bent, the back is curved as it should be and the screen is made slightly different, and not many glass screen protectors work.
Edit : face down it rocks...that's odd I've not experienced that, maybe it is bent and I don't know what to do about that
Thanks for your reply. But yes the phone is bent, and I am not sure which structural part is bent and which part of the phone actually follow suit. If I could identify the part that is bent, I could take it apart, replace the bent part (middle frame?) and then it would be perfect. What is also really funny, is that the screen is not broken nor split, as it seems to be elastic enough to bent without breaking...
axolotl98 said:
Thanks for your reply. But yes the phone is bent, and I am not sure which structural part is bent and which part of the phone actually follow suit. If I could identify the part that is bent, I could take it apart, replace the bent part (middle frame?) and then it would be perfect. What is also really funny, is that the screen is not broken nor split, as it seems to be elastic enough to bent without breaking...
Click to expand...
Click to collapse
No worries. I have no idea what part could be bent, but it's possible that there's a lot of stress on the glass and it could break at a later point in time. You could try taking it apart and see if you can identify what is bent, had the phone been taken apart or had the screen been repaired before you got it?
I ask because I had to repair my screen, did it myself, but had to glue the frame to the LCD. In doing so I used crazy glue, and then 3 months down the road the bottom quarter of my screen stopped responding to touch due to the crazy glue pushing up on parts of the screen and wrecking something inside.

Phone screen repair glue recommendation

Hey guys,
I've noticed the black (plastic/glue?) part at the edge of my screen has fallen off right at the left upper corner. Now I can see light sipping between the screen and the edge of the phone. Do you guys have any recommendation for repair glue so I could seal that part to prevent any water damage? Thanks.
c19932 said:
Hey guys,
I've noticed the black (plastic/glue?) part at the edge of my screen has fallen off right at the left upper corner. Now I can see light sipping between the screen and the edge of the phone. Do you guys have any recommendation for repair glue so I could seal that part to prevent any water damage? Thanks.
Click to expand...
Click to collapse
is that the speaker strip? Don't be filling that with glue!
IronRoo said:
is that the speaker strip? Don't be filling that with glue!
Click to expand...
Click to collapse
No it's not the speaker strip even that part is also coming off :silly:
Do it fast, I got the same Problem and just after I noticed I got a whole lot of dust between my camera and glas.
Luckily Essential shipped me a new phone...
c19932 said:
No it's not the speaker strip even that part is also coming off :silly:
Click to expand...
Click to collapse
Yeah, that little strip was a bad design.
The LOCA glue normally used for mobile phone screen probably a bit too thin & runny to fill an open hole, so I'd be looking at a ceramic chip repair kit (if you can get suitable colour) or maybe a clear epoxy (though not sure how well it'll stick to ceramic). I don't think anyone has a proven solution so far.
IronRoo said:
I'd be looking at a ceramic chip repair kit (if you can get suitable colour) or maybe a clear epoxy (though not sure how well it'll stick to ceramic).
Click to expand...
Click to collapse
From my experience replacing the display on this phone, the thin frame/bezel where the glass fits is actually not ceramic. It feels like some sort of a hard plastic that you can actually scrape and shave a thin layer off with a sharp blade (i discovered that while cleaning out the old adhesive). I tried scraping a semi-exposed edge of the back ceramic plate with a blade - very different feeling. My phone also has a tiny damage to this front bezel in the corner which is a "nick", unlike a chip or a crack you would expect in a ceramic material.
so do you guys have any advice for the type of glue that could be used to fill up the gap?
I have replaced the screen on my phone and used E6000 glue, it is clear and does not run like super glue.
Edit: they also make it in black.

Categories

Resources