Related
I have an unlocked Cingular 8125 that I am using on TMobile. I can't seem to figure out how to get my Data plan working on it. Can anyone explain what settings I need to change, i.e GPRS and MMS. Thanks.
For GPRS/EDGE setting in T-MO USA do the following:
Press start then go to settings then connections and then connections.
Then add new modem connection
Under select a modem pick cellular line. then click next.
Under phone number insert internet2.voicestream.com
no no no......internet2 will only cause problems later on.....here just do the following....
Hard Reset your device after which before it starts installing all of the cingular customization quickly soft reset (This is where it sayd installing applications in 3...2...1..)
After you soft reset just install the files in the order I have them listed saving the registry cab for the end. Once you have done all this press and hold the power button until it says "data loss can occur...blah blah balh" hit OK and the unit will switch off. When it switches off count 3 and just press the power buton one time to turn the unit back on.
You should be in the clear now.
lvlolvlo said:
no no no......internet2 will only cause problems later on.....here just do the following....
Click to expand...
Click to collapse
What do you mean internet2 will cause problems later on? I used to use internet3 here in New York, then all of a sudden I could not connect to the internet using the GPRS unless I was in say Washington, DC. Upon on reading something in a chatroom regarding various settings, I saw the internet2 specified, and switched the official tmobile cab set network obtained from club imate from internet3 to internet2 and it has worked ever since. But I have noticed when traveling up and down the Eastern Seaboard that I do have to change the setting.
wap.voicestream.com is T-Mobile's main data line....from there you get to hop onto internet2 or internet3. It is best to have it set to wap.voicestream.com as you would benefit from this the most.
The reason why I said it would cause problems later on is that what if T-Mobile changes something or applies some changes (like reserving internet3 only for VPN customers) then you would be effected by this change.....so it's better to leave somethings default but tweak the hell out of the rest of th deivce!
A note about internet3....this is reserved specifically for those indivduals who have added VPN access to their accounts...you know the plan that allows you to use VPN access i think it's an additional 5$-10$ more per month....
you are probably right about the wap.voicestream.com I just posted what works for me. thanks for the cab, i will probably use it after i do a future rom upgrade.
no no no......internet2 will only cause problems later on.....here just do the following....
Hard Reset your device after which before it starts installing all of the cingular customization quickly soft reset (This is where it sayd installing applications in 3...2...1..)
After you soft reset just install the files in the order I have them listed saving the registry cab for the end. Once you have done all this press and hold the power button until it says "data loss can occur...blah blah balh" hit Ok and the unit will switch off. When it switches off count 3 and just press the power buton one time to turn the unit back on.
You should be in the clear now.
Click to expand...
Click to collapse
any specific area i should install this on the phone? folders? thanks.
1. Download the file
2. Unzip the file
3. Right click the folder just before you see the files and make it "Read Only"
4. Transfer to device (I personally like keeping them on a storage card)
5. Open File Explorer and install one by one
a. Tap on file
b. Leave default setting of installing to Device
c. Tap Install
d. Tap OK (top right corner after successful install)
e. Repeat a-e for all cab files
6. Press and hold down power button until data loss message box comes up
7. Tap OK (unit will now power-off)
8. Power unit back on....enjoy life....
Although I must say you should consider flashing your device with the iMate 2.16 ROM....I have it running and I'm loving it! If you don't need it at least consider flashing your device with the original T-Mobile ROM available here. What's the point of doing either...
iMate - Faster, included Java support, AKU2 (MS Security/Push Technology)
T-Mobile Original - Other than physical appearance your device will function just like a stock T-Mobile MDA
i have the latested tmobile rom, can i just flash the iMate 2.16 ROM? what else do i need?
hi, i just updated my o2 mini s to the new rom from o2 uk.. ive been able to conect to tzones before.. now i cant.. PIE will stay at Locating before popping up an error message.. anything i can do to fix it? or get my tzones working again? thank you
the same for Cingular 8525 for t-mobile US
Will the t-mobile file in the previous message install t-mobile settings to work on an unlocked Cingular 8525? If not, does anyone have the settings? I could not get the ones at t-mobiles US or UK site to work. I will be brave and install while in Windows Mobile 5 (against my better judgememt)
Thanks!
FYI:
I did not hard reset it but simply installed the files in the order within the zip. I did get a waring on the registry edits.cab about being designed for an earlier version of windows. Anyway, I did the Power + OK button reset. Upon loggin, the HotSpot Login shows in the Connections and I was successfully able to send a MMS message my gmail account!
Thanks
I'm happy and relieved to say that this still works. I just updated my cingular 8125 with t-mobile service. Thanks lvlol!
lvlolvlo said:
1. Download the file
2. Unzip the file
3. Right click the folder just before you see the files and make it "Read Only"
4. Transfer to device (I personally like keeping them on a storage card)
5. Open File Explorer and install one by one
a. Tap on file
b. Leave default setting of installing to Device
c. Tap Install
d. Tap OK (top right corner after successful install)
e. Repeat a-e for all cab files
6. Press and hold down power button until data loss message box comes up
7. Tap OK (unit will now power-off)
8. Power unit back on....enjoy life....
Although I must say you should consider flashing your device with the iMate 2.16 ROM....I have it running and I'm loving it! If you don't need it at least consider flashing your device with the original T-Mobile ROM available here. What's the point of doing either...
iMate - Faster, included Java support, AKU2 (MS Security/Push Technology)
T-Mobile Original - Other than physical appearance your device will function just like a stock T-Mobile MDA
Click to expand...
Click to collapse
100% Correct use the wap.voicestream.com and follow the instructions above
Thanks lvlolvlo
Hey lvlolvlo thanks for the tmobile file....really helped. I spent a lot of time googling settings with no luck, i tried calling tmobile with no luck....but your post really helped. thanks!
Sorry if this is a horrible question but...
When trying to flash my 8125 I'm receiving an invalid vendor ID message and I'm told the updater can not update my device.
Any help would be awesome.
Thanks :: M
help
ok. ive been reading these posts all week and still need help. i have a 8125. i do not have cingular, i have tmobile. i have unlocked the phone. when i had my tombile phone i paid for pic and vid txts and AIM. i didnt pay for internet. how did i change the settings on my 8125 so i can send and reiceve pic and vid txts. i have tried following almost every step ive read and cant get it working. ive called tmobile and they have sent all types of IP numbers andect. but i have know idea where to input them. every despription isnt how i see it on the phone. someone plz help.
dan wilson
help me too
mrdanboone said:
ok. ive been reading these posts all week and still need help. i have a 8125. i do not have cingular, i have tmobile. i have unlocked the phone. when i had my tombile phone i paid for pic and vid txts and AIM. i didnt pay for internet. how did i change the settings on my 8125 so i can send and reiceve pic and vid txts. i have tried following almost every step ive read and cant get it working. ive called tmobile and they have sent all types of IP numbers andect. but i have know idea where to input them. every despription isnt how i see it on the phone. someone plz help.
dan wilson
Click to expand...
Click to collapse
i have the same problem please help!!
-Bart
Ok, i think im getting this, i also like everyone else here has a 8125 with T-Mobile. But i cant access the itnerent or send MMS.
So dose this mean i have to flash my cell phone with either the iMate or hte toehr MDA rom?
if i do will all hte wifi and all hte drivers work still like bluetooth and such?
t mobile settings
alright everyone, if you have the 5.99 tzones, 1. enter wap.voicestream.com in the apn info, 2. make sure you set the PROXY: 215.155.165.50 port 8080 for http and default ports for the rest, 3. make sure you change the default Internet connection to the one with the proxy under connections/advanced/select networks. and for email with the tzones you have to change the settings for your email to connect with the proxy connection or every time it checks email it'll disconnect and reconnect, and then you'll have to disconnect and reconnect to surf the web.
now for the full internet plan you dont need the proxy, the internet2 and 3 are for the blackberry plan and vpn plan if memory serves me correctly.
Nice thread!
Just used to configure a 8125 that I got of Craigslist yesterday, everything is working now on T-Mobile MMS SMS and internet.
Hi,
I have the "OPEN" inet settings from this thread working:
http://forum.xda-developers.com/showthread.php?t=280566&page=2
I was wondering if anyone can check out their "factory" X01HT and see if there are different settings. My connection seems slow. HSDPA is suppose to be working right? I have yet to see a 3G signal. I only get a U so I dont know if that has anything to do with it.
BTW I have the latest JASJAM ROM (1.06 Bootloader).
I actually went to Softbank to see if they could get me the settings here on Okinawa but they never got an answer. Said they would call.
Thanks for any help.
Jokinawa
I will try today to open my X01HT and see if I have same issues as you.
Question, is there a way to buy/get Window CE 5.0 English OS and install it on X01HT?
unfortunately, it is not any setting... softbank has started HSDPA connection services ONLY within the 23 wards of tokyo and some parts of "seirei ****ei toshi" (special cities like yokohama-shi or saitama-shi.)
okinawa is not yet in the coverage of the service.... that's why your x01ht is only as fast as normal 3G...
Flipzoid said:
I will try today to open my X01HT and see if I have same issues as you.
Question, is there a way to buy/get Window CE 5.0 English OS and install it on X01HT?
Click to expand...
Click to collapse
WM5.0 OS is not sold.
however, you can change the OS by burning another ROM. to do it on x01ht, you need to unlock the device first. then, choose any WWE ROM you like, and burn it.
all the necessary info is already in wiki. you'd better read it.
Thank You
Thank You qtotter, well I was working with Softbank tech services about "no internet" and they told me to hard reset the device. They said my internet connection should be the 3rd connection under "START > Settings > Connections (TAB) > Connections"
So that lead me to believe there are connection settings. Seeing as how I can not read Kanji / Katakana can you tell when Okinawa will get the HSDPA service?
the reason why they told you to perform hard reset was the original softbank rom will restore the connection setting by hard reset. you have burnt another rom, and this does not work with your case.
secondly, they will not tell you the setting (password). if you delete the connection setting or change the password of the connection by mistake, they would advise you to perform hard reset.
currently, softbank does not even disclose the precise coverage of HSDPA. i have not read any articles about their coverage expansion plan yet.
I'm using Cingular 8525 (unlocked) in Canada with Fido sim, where can i change the GPRS setting on the phone? i don't see any place that can change it? thanks in advance!
look what I found when I googled Fido "GPRS Settings"
http://www.dslreports.com/faq/7418
In any case, Ross Barkman's page is the best for finding your telco settings.
http://www.taniwha.org.uk/gprs.html
To change your settings you have 3 options (I've included details instructions so follow them carefully):
Option 1.
1. Go the box the phone came in
2. Pull out the little book that says user manual
3. Open the book up
4. Read it.
Option 2.
1. Scroll to the top of this page
2. Click on XDA-Wiki
3. Go the Hermes Section
4. Read it.
5. Read it again, so you understand everything not just the GPRS problem.
Option 3 (and I'm gonna hear about this from pof).
1. Click Start
2. Click Settings
3. Click Con... Argh, I can't sorry man... you're gonna have to pick 1 or 2.
Forgive me pof, I started feeling sorry for the newbie. I promise I won't do it again!
thanks! i already know what the setting is, but i'm just wondering that will Cingular allow me to change the GPRS settings?
If the phone is unlocked, there is nothing stopping you from changing anything on the phone. For all purposes Cingular is just a name written on your phone, Cingular the company has nothing to do with you anymore unless you have a cingular SIM in your phone.
Thanks for replied, the problme is, the Cingular stock rom doesn't have any icon that let me to change the GPRS setting! there should be a "Network Wizard" on Setting-->Connection , but there is non! when i click on GPRS setting, it only allowing me choose either "PAP authentication" or "CHAP authentication" . i have been playing the GPRS setting for a long time, but didn't get anyting, so should i flash to other rom? thanks in advance!
We are having the same problem
I have an 8125 running with a Movistar Mexico SIM and last Sunday I got its replacement: an 8525, I spent most of the Sunday (and the several days before) reading threads and doing all procedures to unlock it until I succeeded, so now I have an 8525 unlocked supre CID and all that ... "running" with the same SIM and same GPRS set up but I haven´t been able to navigate internet on GPRS (stalls in the "opening" status), I installed spb GPRS Monitor and the traffic is zero Kb on all tries that I´ve made to connect to the internet. I set also my Gmail account which is set up to retreive amails every 15min and although generates GPRS traffic the behavior is totally different as in my 8125. About MS Messenger and Hotmail the GPRS connection hasn´t been imposible. I´m a newbie I know it!! But you expert guys should help us at least with comments, I agree that some people make repeated questions because they don´t want to read, this is not our case, I´ve read a lot and I´m sure eeric di´d it too. PLEASE HELP....
Use this as a guide to putting in GPRS and MMS settings.
--
Substitute the settings for your network.
--
http://bnycastro.blogspot.com/2006/12/smart-gprs3g-and-mms-settings.html
Thank you Bny! I do know how to make it and also set the proper strings in my case APN would be internet.movistar.mx and the user name & paswrord is movistar. That´s not really the problem, in fact I do know that I have a connection to my network, the problem is that something happen 8525 than doesn´t allow me to route my connections thru other routes but the one that Cingular has a preset. I really don´t know if is it the Ext ROM, my SIM card (not a 3G card) or the network itself since is not a 3G network !!!?
have any of you guys considered doing a hard reset and then soft reset before the 3 second customization? that way none of the cingular stuff gets installed?!?
luiggi said:
I have an 8125 running with a Movistar Mexico SIM and last Sunday I got its replacement: an 8525, I spent most of the Sunday (and the several days before) reading threads and doing all procedures to unlock it until I succeeded, so now I have an 8525 unlocked supre CID and all that ... "running" with the same SIM and same GPRS set up but I haven´t been able to navigate internet on GPRS (stalls in the "opening" status), I installed spb GPRS Monitor and the traffic is zero Kb on all tries that I´ve made to connect to the internet. I set also my Gmail account which is set up to retreive amails every 15min and although generates GPRS traffic the behavior is totally different as in my 8125. About MS Messenger and Hotmail the GPRS connection hasn´t been imposible. I´m a newbie I know it!! But you expert guys should help us at least with comments, I agree that some people make repeated questions because they don´t want to read, this is not our case, I´ve read a lot and I´m sure eeric di´d it too. PLEASE HELP....
Click to expand...
Click to collapse
I suppose there could be a number of reasons for this. But here is a consideration from my experience albeit on a different network. I entered all the details for my O2 connection as published on several different internet sites. Initially I could not get beyond "connecting" but found a minor error in what I had entered. Now I got as far as "Opening" but never actually open a site. I gave up but happened across a website that suggested that if you get that far i.e. "to opening" then perhaps the only fault would be the port number in proxy settings for HTTP. I checked and it was correctly set to "80". I did searches on the internet and found one that suggested port "8080" and it worked straight away. I only suggest that you check the port number and whether there are alternatives if you are getting as far as "opening".
Mike
eeric said:
Thanks for replied, the problme is, the Cingular stock rom doesn't have any icon that let me to change the GPRS setting! there should be a "Network Wizard" on Setting-->Connection , but there is non! when i click on GPRS setting, it only allowing me choose either "PAP authentication" or "CHAP authentication" . i have been playing the GPRS setting for a long time, but didn't get anyting, so should i flash to other rom? thanks in advance!
Click to expand...
Click to collapse
Do you have Start>setings>connections>connections
Note two "connections" and if you do you get a page titled connections and Two headings 1. My ISP and 2. My Work Network
Mike
axiom said:
Option 3 (and I'm gonna hear about this from pof).
1. Click Start
2. Click Settings
3. Click Con... Argh, I can't sorry man... you're gonna have to pick 1 or 2.
Forgive me pof, I started feeling sorry for the newbie. I promise I won't do it again!
Click to expand...
Click to collapse
You're not scared of him are you!!!
Mike
Thanks Mike and shogunmark! I´ll try the trick to avoid the customisation from Cingular; as far the port setting that´s a good point, however my screen for connection settings only shows 2 tabs: 1)Tasks and 2) Advanced, the 3rd tab (Proxy) that is present in my 8125 is missing in my 8525. Any ideas to make it appear or change the port? Thanks again you guys!
I did it, but it did not work.....
I just tried but it didn´t work either.... let´s see what´s next. Thank You!
shogunmark said:
have any of you guys considered doing a hard reset and then soft reset before the 3 second customization? that way none of the cingular stuff gets installed?!?
Click to expand...
Click to collapse
I did what shogunmark suggested and it didn´t work either, I´m wondering waht would be the correct proxy server configuration, besides the port number I really don´t know the type of connection (http, wap, sec wap or scocks 4/5), neither the server name
I made the connection
I allways had the right "parameters" to set a proper connection, but I realized that the connection speed is extremely slow (5 Kbps at the most). I open another thread related to the use of a G3 device with a non G3 SIM / network. Thank you all for your help.
luiggi said:
I allways had the right "parameters" to set a proper connection, but I realized that the connection speed is extremely slow (5 Kbps at the most). I open another thread related to the use of a G3 device with a non G3 SIM / network. Thank you all for your help.
Click to expand...
Click to collapse
If you manage to make progress in improving connection speed, it would be useful to post a solution on this thread. Hope you succeed.
Mike
I have been given a "Hermes" from the O2 Network (XDA Trion), I want to use it on the Three Network here in the UK. Are there any settings or software resets I need to do? I understand that this phone was not intended for this network, but it seems the best phone for my needs. Any comments? Suggestions? Tips?
Hope you can help! Thanks!
try;
http://www.filesaveas.com/gprs.html for yor data connection settings...
Use the forum search function for unlocking!
Or start here;
http://forum.xda-developers.com/showthread.php?t=325748
Hi. I did this recently. I flashed to schap's latest rom which had some way of automatically configuring the phone (but I don't know if that happens without the rom). In order to get to planet 3 (eg check balance) you will need to pretend to be an allowed phone (eg n95 http://forum.xda-developers.com/showthread.php?t=341755&page=2 ).
If you need any help, just ask. Seems to work perfectly, and with schaps rom I get hsdpa .
I just flashed my 8125 to the T-mobile rom. Now my internet won't connect because all the settings are now for T-mobile. What do i have to change to get the internet to work with AT&T???
I am curious about the same thing. I just upgraded my T-mobile and now the internet won't work.
In addition - the alt keys (of shift on a regular keyboard) are not the same as WM5, but this is a minor thing that I can handle. Just got to remember where the question mark is. LoL.
But, how do I get the internet to work again?
Found it
Found the answer... helped me, maybe it will help you too.
http://forum.xda-developers.com/showthread.php?p=1954233
look for "network wizard" I have a download of it in my rom thread.