Database Users

htc wizard with linux?

hi, is there a linux, which i can install on my htc wizard? when yes, can you give a link and a introduction?
Thanks!

No, But it is being worked on! So sorry no link!

Link
http://linwizard.sourceforge.net/

Interesting .. for those who decided to go anti M$ .. bump!

ok i want to install linwizard, but it doesn't worked! the error is:
UNABLE TO OPEN LOG FILE ...
TINY_CONSOLE_INIT_DONE .
CANNOT OPEN SCRIPT FILE
\STORAGE\PROGRAMM FILES\HARET\LINUX.HA
i puted the files on storage card or what is storage?
i did it by this introduction
http://omap850.om.funpic.de/downloads/wizard/readme
and here are the files:
http://omap850.om.funpic.de/downloads/wizard/
HELP!

ok i want to install linwizard, but it doesn't worked! the error is:
UNABLE TO OPEN LOG FILE ...
TINY_CONSOLE_INIT_DONE .
CANNOT OPEN SCRIPT FILE
\STORAGE\PROGRAMM FILES\HARET\LINUX.HA
i puted the files on storage card or what is storage?
i did it by this introduction
http://omap850.om.funpic.de/downloads/wizard/readme
and here are the files:
http://omap850.om.funpic.de/downloads/wizard/
HELP!
Click to expand...
Click to collapse
You don't put the files on the storage card. You create a new directory in the root of file system called "Storage". This is confusing I know. You want a new folder called "Storage" on the *same level* as your "Windows" and "Storage Card". Then you put the files in Storage/Program Files/Haret.
Also if you are using the kernal from that site (i.e. pre built) you wont be able to do anything. On boot it will crash with a kernal panic. If you want a working version you have to compile your own kernal from the source in their repositry...and I ain't talking you through that! Even then you only get a command prompt
Lewis

WOW THX!!!
but now i have a kernel panic^^
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
after that the device is freezed
only what i can do is a soft reset!
*grmml*

WOW THX!!!
but now i have a kernel panic^^
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(1,0)
after that the device is freezed
only what i can do is a soft reset!
*grmml*
Click to expand...
Click to collapse
Yes! I told you that would happen! See my above post. Have compile the newest kernal to get anywhere - and even then you only get a command prompt.
Lewis

Next Problem, did i understood that right, that i need linux on my pc? because that looks like in ubuntu in the shell or a other linux.
cd /usr/local
tar xvfj /path to/arm-linux-gcc-3.4.1.tar.bz2
vi ~/.bash_profile
add in the line: PATH= ":/usr/local/arm/3.3.2/bin"
make su - <username>
Click to expand...
Click to collapse
i havent linux on my computer. so what could i do? can somebody send me the kernel, or his complete folder with linwizard?
mail: [email protected]
Thanks!

Grab a Linux liveCD like Knoppix www.knoppix.org or DSL - Damn Small Linux which is only about 60mb so will be a quick download, if you install it to a USB stick too then you can write files to it as well.
EDIT: Just realised that if all you want to do is to extract files then grab WinRAR it does most things like tarballs and the likes.

Yes you need Linux to compile a kernel - and a fair few dependencies.
I have attached a kernel i compiled (I *think* it's the latest). I can't see why this would be a problem as the source is open to anyone, but if it is let me know so I can remove it.
Lewis

interesting, can anyone post some screen shots of Linux on the wizard?

This one seems a bit more recent, and will get you a command line without a lot of hassle:
http://webtomware.rhoen.de/linwizard/

Hmm.. but the linux seems to be bit far fetch from being usable, huh? Usually, I'm good in getting stuff from the web, but it seems that this linwiz information is a bit hard to dig. I was just wondering, how functional is it currently? I know that there are a few linux for others Windows based phone and they have quite a history to them, so I presume there are some working linux that can be transfer to the Wizard?

Hmm.. but the linux seems to be bit far fetch from being usable, huh? Usually, I'm good in getting stuff from the web, but it seems that this linwiz information is a bit hard to dig. I was just wondering, how functional is it currently? I know that there are a few linux for others Windows based phone and they have quite a history to them, so I presume there are some working linux that can be transfer to the Wizard?
Click to expand...
Click to collapse
Yeh it is. It's all on that webpage I linked a while back. The wiki is where you'll find instructions. If you find the readme file it talks you though it., but the compiled kernel I posted above is the latest anyway. It is only a command line and people are still working on it. Long way from being at the standard of other devices (Blue Angel, Universal etc.). But still, its hope! I for one can't wait.
This one seems a bit more recent, and will get you a command line without a lot of hassle:
http://webtomware.rhoen.de/linwizard/
Click to expand...
Click to collapse
Thats the same thing. Experimental way of getting an x-server running. If i read the forums right they've since found a better way using the more compatible linux frame buffer standard instead.
Lewis

I am interested in Installing Gnu/LinWizard on my Cingluar 8125.. were can i found the ROM.. link please

http://webtomware.rhoen.de/linwizard/linwizard-0.1.4.tar.gz
that works!
Linux i am comming!^^

and now? have anybody linux on his pc, to install like in the readme? i want nano x on the ppc too^^
if anyone could install it, can the person send the files? or the folder?
or how can i install it on windows?
thank you!

any one try to install it in QTEK S200

Need Mac Beta Testers: Interface for Pushing Files

Hello,
I need beta testers running Mac OS X to test a new application.
This application is for people who are either uncomfortable or unwilling to use Terminal and ./adb for pushing files to their device.
This first beta version is just to test how it works on different computers. It pushes the file to the sdcard of the phone using ./adb. The only input needed from the user is to select the file.
Later releases will let the user choose which folder on the device to copy to, but the next release will probably just involve pushing .apk to the /system/app folder.
Please let me know the results.
http://derekcwilkinson.com/PushFile.zip
Beta 2:
http://derekcwilkinson.com/Push_File_Beta_2.zip
Change Log:
Added option to choose the location that the file is to be pushed to.
Added Recovery application
Added Reboot application.
Planned Updates:
Pull File - Ready
Device Backup - PM me if you know a good way to backup with ./adb (mine is taking too long)
Device Backup w/SD - PM me if you know a good way to backup with ./adb (mine is taking too long)
Install .apk - testing
Uninstall .apk - testing
Restore Backup - going to take awhile (need to get device backup working first)
Restore Backup w/SD - going to take awhile (need to get device backup working first)
Flash ROM - testing

is this an actual program or a script?

Works fine for me

mrchu001 said:
is this an actual program or a script?
Click to expand...
Click to collapse
It's a program that runs a script
It's just a test to see how it works, I will turn it into a more "real" application later.

I've updated it to Beta 2

I'm copied/pasted the android folder into /User/document but when i run "Push File With Location" show this error message -->
( iMac Snow Leopard v.10.6.3 build 10D573

@rainbow
same thing happening to me!

rainbow2112 said:
I'm copied/pasted the android folder into /User/document but when i run "Push File With Location" show this error message -->
( iMac Snow Leopard v.10.6.3 build 10D573
Click to expand...
Click to collapse
Hmm, strange, I haven't had any beta testers have this issue.
Is the phone connected with USB debugging?

derekwilkinson said:
Is the phone connected with USB debugging?
Click to expand...
Click to collapse
Yes, I have always flag on debugging USB mode.

rainbow2112 said:
Yes, I have always flag on debugging USB mode.
Click to expand...
Click to collapse
Try this, and tell me where the error comes up.
http://derekcwilkinson.com/PushFileSource.zip

derekwilkinson said:
Try this, and tell me where the error comes up.
http://derekcwilkinson.com/PushFileSource.zip
Click to expand...
Click to collapse
When run this, automator show this windows ...

rainbow2112 said:
When run this, automator show this windows ...
Click to expand...
Click to collapse
Ah, you're using a different language. That could be the problem. Is the folder path still /Documents/Android/SDK/tools on your computer?
Also, when you run it in Automator, where does the error occur?

derekwilkinson said:
Ah, you're using a different language. That could be the problem. Is the folder path still /Documents/Android/SDK/tools on your computer?
Also, when you run it in Automator, where does the error occur?
Click to expand...
Click to collapse
The folder path in my iMac is /Users/Rainbow/Documents/Android/SDK/tools
the error occur after a few seconds after click OK after choosing the file to be sent to MemoryCard

Okay, if it doesn't occur until then, that means it sees the device and android SDK. Is the SD card mounted on the computer? are you copying to /sdcard/ as the file path?

derekwilkinson said:
Okay, if it doesn't occur until then, that means it sees the device and android SDK. Is the SD card mounted on the computer? are you copying to /sdcard/ as the file path?
Click to expand...
Click to collapse
No, sdcard no is mounted.
i don't understand this_ " are you copying to /sdcard/ as the file path?" sorry

When that window pops up (the one in your screenshot) are you putting /sdcard/ in the text box?

im going to try your app out =]
excited.

Sick of windows..
I am so sick of using a windows computer to do anything on my Hero so as soon as I get home tomorrow I will be trying this out on my system. SL 10.6.4 and I will be so happy to do it..

404 File not found. I'd love to help test this - can someone please re-upload the zip?
Edited 1/16/11
I'm using root explorer so this isn't really necessary for me anymore.

cloudstrife7 said:
404 File not found. I'd love to help test this - can someone please re-upload the zip?
Edited 1/16/11
I'm using root explorer so this isn't really necessary for me anymore.
Click to expand...
Click to collapse
I'm a bit confused--PushFile is for pushing files from your Mac to phone (in other words, a computer-side application), while Root Explorer is a file manager for the phone (a phone side app), that, unless I've missed something, does not replicate the functionality that PushFile attempted to provide. Am I missing some cool new feature of Root Explorer that lets you easily transfer files from your Mac to your phone?

Duel booting thread Finished :)

One of my favorite things about android is being able to duel-boot os's and playing around with Linux distros ,but ive seen a drop off of them being brought to Android sadly . so im starting this thread in order to get all the duel-boot,chroot boots and all other ones into one place if i forget one please let me now and ill do my best to add it
Note these are not all native boots and i take no responsibility for anything that happens to your device, these are not mine either and the owners should be thanked im just bringing them together :victory:
Native Boots
My favorite and best (in my opinion) are the native boots Starting off is Ubuntu as a native boot
UBUNTU
The original creators in bringing Ubuntu to the Acer a500 first are right here on XDA netham45 and sp3dev The original thread can be found here Here
To start off on booting Ubuntu Natively you're going to need Root obviously and acer recovery installer which can be downloaded from the Android market
for the sake of this tutorial ill go over booting it off the internal storage :laugh:
1.Start by making sure you have 8gigs free of internal storage as this is how big the .rar is unpacked
2. after you download acer recovery installer youll need to flash this recovery Here
3. After that download all 3 of these .rar's onto your pc put them in a folder of there own and extract the first one they should all merge giving you one rootfs File1 File2 File3
4.once you get the rootfs move it to the home directory of your internal storage
5. power off your tab and boot into your recovery using power and volume- and your good to go
6.some tweaks you could do would be
For sound
Code:
usermod -a -G audio <your username here>
For cpu frequency scale
Code:
sudo add-apt-repository ppa:artfwo/ppa
sudo apt-get update
sudo apt-get install indicator-cpufreq
it will appear in you task bar on reboot best set to performance
:laugh:
Backtrack
Ive been told it works the same way but replacing the ubuntu.img with the backtrack.img which you can download from
http://www.backtrack-linux.org/
Cannot confirm this if someone tests it please reply back
BODHI LINUX
Bodhi Linux is another Linux brought to android with the dev being here on XDA apapousek Make sure to look at the original thread and thank it Here
There are to differant builds Alpha1 and Alpha2 ill be going over Alpha2
1.Start off by using gparted or any partitioning tool should work, and partion your micro sdcard make the first one as ext4 and make it at least 1.5gb name it bodhi make your second partition 128mb at least of fat32 format
2.mount the partitions
3.download bodhi Linux from Here
4.Extract the bodhi tarball to the root of your micro sdcard by using the commands
Code:
sudo su
cd /media/bodhi/
tar -jxvf /home/name/bodhi_alpha2.tar.bz2
5.Copy recovery.img to the second partition and flash it using Acer recovery installer from Here
6.Boot into recovery and you should be good to go
7.once booted into bodhi open terminal and type in setupwifi
CHROOT
Not as good in my opinion alot less functionality but there still fun for testing out a Linux distro and require less space without having to sacrifice your recoveryThere basically running a virtual machine on top of android to run a Linux distro all the ones I've tried have been slower so i just tend to stay away from them but feel free too XD
First of all there's a couple of different apps that will help you get it installed hassle free (for the most part)
starting off there's Linux installer standard Here
There's also Complete Linux installer with two donate versions available Here
Manual Method
There's also a more manual way of setting up chroot.
1.Make sure you have a terminal emulator Here 7zip Here and a .img file for a linux distro ill put up backtrack since it seems to work well make sure you get the ARM version of Backtrack And finally Android VNC Here
2.Download the .Img file of your choice in this case Backtrack 5 and extract it once this is done you will get another folder with bt5.img.gz and a whole other bunch files right click on the bt5.img.gz and go to extract here now copy them all into a folder called BT5
3.copy the folder called BT5 to the internal storage of your device it will be around 5gigs
4.Make sure you have Root access and busybox installed
5.Now open up your terminal emulator app and type in
Code:
su
cd/sdcard/BT5
Then hit enter and type in
Code:
sh bootbt
You should see [email protected] if it worked if it did then you can go ahead and use BT5 commands or you can get a gui by typing in.
Code:
tightvncserver -geometry 1280x800
Hit enter then type in
export USER=root
hit enter then
vncpasswd
Now its going to ask you for a password just create any random one and then verify it . After that it will ask you if you want to create a view only password hit n
6.Finally open VNC android you'll have nickname which doesn't matter port which is usually 5901 if that doesn't work try 5902 or 5903 address leave bank and make sure your connected to [email protected] just hit connect and your done one final thing to remember though is when you want to exit you have to go back to terminal and type in exit to shutdown
WINDOWS
WINDOWS95
windows is actually run through an app which emulates it i believe it has little to none drivers instaled and you cant really do much that ive found but its fun to mess around with and show off :laugh: to get this up and running is pretty simple all you have to do is.
1.Download this .rar HERE
2.Extract the folder to get a sdl.apk and a folder called sdcard move both of them to the root of your sdcard
3install the .apk and open it when shutting down though you have shutdown the right way by hiiting shutdown if you dont on reboot youll get a scandisk error
WINDOWS XP
Windows xp is even slower more useless and way more complicated to run BUT its still kinda cool to have
1.First you'll want to download everything you'll need bochs for android from HERE Sdl.zip from HERE Bochs for pc from HERE and Qumu manager for pc HERE. Last thing you will need is a windows xp.iso file not .img but .iso (ide post one but i read somewhere its ilegal to post .iso for windows :/ )
2.Download and install boch's for android on your tablet then move the SDL.zip to the root of your SDcard
3.Install Boch's and Qemu manager onto your pc
4. what you going to need to do is run a virtual machine with the .iso you have so first thing you'll want to do is once you install Boch's for your pc hit the start button then go to all programs and find the Boch's folder inside of that folder there should be a program called Disk image creation tool.
5. Next type in hd then hit enter, after that type in flat then hit enter ten after that its telling you what size you want it to be usually windows xp doesnt need more than 1.5gb so type in 1500 and hit enter then finally type in c.img and hit enter.
6. Now you want to open Qemu, once inside Qemu you want to start a new virtual machine do this by going to the vm tab and click on new virtual machine.
7.you can give it any nickname it doesnt matter just give it one and hit next.
8.Now it wants to know how much ram you want to allocate to this virtual machine 512mb to 1gb is usually fine pick and hit next.
9. Then hit finish now what you want to do is install the .iso to the blank image file but you need to specify what it is so go to the drives tab, click on Harddisk zero.
10.now you have to find the file c.img its usually located in program files/bochs you might have to make sure all files is selected in your file type bar.
11.Select thec.img file and hit ok
12. Now you want to click on your cd-rom that is your windows xp.iso file so browse and find your windows xp.iso and click ok.
13.Now your ready to run your virtual machine just hit the run button (green one) and if everything went alright you should see it start to boot up.
14. Now you'll have some on screen prompts make sure you follow them and choose ntfs file system when it prompts you to. (process will take 30min+ depending on computer speed)
15. Once your installation has been completed and your at the desktop you want to stop virtual machine. click yes end session. (i know right all that time just to spend two seconds in it)
16.Now you want to find the c.img file which is no longer blank and has windows xp installed to it. Usually in program files/bochs copy it then paste it inside the folder called sdl on your sdcard. If there is already a c.img inside of it just overwrite it.
17.okay almost done (i promise ) your going to want to copy all this code
Code:
megs: 256
cpu: count=1, ips=6000000, reset_on_triple_fault=1, ignore_bad_msrs=1
# filename of ROM images
romimage: file=BIOS-bochs-latest
vgaromimage: file=VGABIOS-lgpl-latest
vga: extension=cirrus, update_freq=25
pci: enabled=1, chipset=i440fx, slot1=cirrus
ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
ata0-master: type=disk, path="c.img"
#ata0-slave: type=disk, path="d.img"
#ata1-master: type=disk, mode=vvfat, path=/sdcard/HDD, journal=vvfat.redolog
#type=cdrom, path="CD.ISO", status=inserted
boot: c
config_interface: textconfig
#display_library: x
# other choices: win32 sdl wx carbon amigaos beos macintosh nogui rfb term svga
log: bochsout.txt
sb16: enabled=1
mouse: enabled=1
sb16: wavemode=1, dmatimer=500000
clock: sync=none, time0=1
Now go to your sdcard/and go the sdl folder and find the bochssrc.txt file overwrite everything in that file with the lines of code you just copied
The megs value at the top is how much ram you want to allocate to windows xp
18 Save te text document and your ready to run windows xp just open up bochs on your phone
Miscellaneous
These are all the os's that ive found that have been duel booted but are not worth it or a tutuoriol was never released will update it as i find them.
so far the only one i know of is Armedslack thsnks to hellvy from what i know of its the same way as bodhi linux but using armedslack packages
MAC OS
Im trying to figure out old mac os and newer ones right now ill be righting a tut once i get it figured out

Just adding another distro. I'm running ARMEDslack. You can use BODHI LINUX approach for installation, but use armedslack's Mini root filesystems instead. For me, there's so many stuff i have to do after installation (mainly recompiling apps & libs) and i'm not sure if anyone interesting in Slackware distro this day. So i'm not recommend this distro unless you have too much free time and know how Slackware work
Another thing, is there anyone get nvidia display driver works? i can't see any practical step to get it working, just ac100 display driver unbuntu package. If anyone get it working, pls share xorg.conf to me

Does ext4 partition has to be the first partition or second to boot bodhi because vfat as second partition cannot be recognized by cwm recovery and I cannot copy any files from internal to external sdcard

el.quechon said:
Does ext4 partition has to be the first partition or second to boot bodhi because vfat as second partition cannot be recognized by cwm recovery and I cannot copy any files from internal to external sdcard
Click to expand...
Click to collapse
first and its not meant to be copied you haven to dd it to it sorry you can't just copy it directly i don't think and fat32 is what the second partition needs to be

gears177 said:
first and its not meant to be copied you haven to dd it to it sorry you can't just copy it directly i don't think and fat32 is what the second partition needs to be
Click to expand...
Click to collapse
it booted in to terminal but usb port didnt work so couldnt use keyboard

No need to flash the kernel to recovery partition, use my dualboot bootloader.

It booted ok for me but it wont let me login at all
Sent from my LG-MS695 using Tapatalk 2

I have a couple questions...
How well does Linux(mainly Ubuntu) run on the A500? Like is it smooth and all the various controls work well.
Does the HDMI out work? If so can you extend the desktop through the HDMI out to another screen. Like have two different windows on each screen.

Drewmungus said:
I have a couple questions...
How well does Linux(mainly Ubuntu) run on the A500? Like is it smooth and all the various controls work well.
Does the HDMI out work? If so can you extend the desktop through the HDMI out to another screen. Like have two different windows on each screen.
Click to expand...
Click to collapse
I'm not sure bout hdmi if you do all the tweaks it runs reasonably well but won't run games and still lags when opening huge programs i had it for a couple of months for the most part you can install whatever you want some programs have missing repositories and you would need to create you own but there not that common i used it for compiling c+ as i need the multiwindow to do it but it will most likely crash if you try to update it i updated it to 12.04 successfully but was then having wifi problems you wil need an external usb keynoard to set it up at first when you boot up click on the top right corner and connect to wifi before doing the setup saves you a couple of steps

gears177 said:
I'm not sure bout hdmi if you do all the tweaks it runs reasonably well but won't run games and still lags when opening huge programs i had it for a couple of months for the most part you can install whatever you want some programs have missing repositories and you would need to create you own but there not that common i used it for compiling c+ as i need the multiwindow to do it but it will most likely crash if you try to update it i updated it to 12.04 successfully but was then having wifi problems you wil need an external usb keynoard to set it up at first when you boot up click on the top right corner and connect to wifi before doing the setup saves you a couple of steps
Click to expand...
Click to collapse
gears177 can you tell me how did you fix wifi after upgrading to 12.04, are you using the ubuntu image from netham and while upgrading did you have any trouble with the packages related to plymouth

el.quechon said:
gears177 can you tell me how did you fix wifi after upgrading to 12.04, are you using the ubuntu image from netham and while upgrading did you have any trouble with the packages related to plymouth
Click to expand...
Click to collapse
i never did fix it i tried everything i could think of nthing worked i dont know it seems that its not even turning on your wifi card i dont know maybe mess around in terminal and try to turn it on with wlan0 up or whatnot im not sure maybe if i get some free time ill try again as for updating i did it in small amounts and i didnt update everything im not sure but i did have a couple of errors they might of been related to plymouth

gears177 said:
i never did fix it i tried everything i could think of nthing worked i dont know it seems that its not even turning on your wifi card i dont know maybe mess around in terminal and try to turn it on with wlan0 up or whatnot im not sure maybe if i get some free time ill try again as for updating i did it in small amounts and i didnt update everything im not sure but i did have a couple of errors they might of been related to plymouth
Click to expand...
Click to collapse
Thats it plymouth i dont know why it keeps failing to instAll and i tryed that thousand times upgrading it always break wifi
Sent from my LG-MS695 using Tapatalk 2

el.quechon said:
Thats it plymouth i dont know why it keeps failing to instAll and i tryed that thousand times upgrading it always break wifi
Sent from my LG-MS695 using Tapatalk 2
Click to expand...
Click to collapse
try installing it manually might work

sorry it took so long guys but its finally done for the most part

does netham have a source code for his kernel

el.quechon said:
does netham have a source code for his kernel
Click to expand...
Click to collapse
maybe in the original thread i didnt find one but then again i didnt really look
http://forum.xda-developers.com/showthread.php?t=1158260

Great work man! I am so happy as a huge ubuntu fan to have this tutorial here for my beloved device.
Sent from my A500 using xda app-developers app

Hey guys is there a script like v6supercharger for ubuntu
Sent from my LG-MS695 using Tapatalk 2

lifeofcoding said:
Great work man! I am so happy as a huge ubuntu fan to have this tutorial here for my beloved device.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
Thanks
el.quechon said:
Hey guys is there a script like v6supercharger for ubuntu
Sent from my LG-MS695 using Tapatalk 2
Click to expand...
Click to collapse
I dont believe so someone could always make one....

Backtrack works natively.
If you go on kernel-xp website there is a RTL8187 kernel for chroot which works well. Its based on acer ICS source code
Sent from my Galaxy Nexus using xda premium

{TUTORIAL} Bodhi Linux on a500

EDIT:
Now you can follow the same process into rogro82's kernel, thanks to Forzaferrarileo. Note that you can just flash the kernel, if you already put it to work with sp3dev's kernel. There's no need to repeat all process.
I've, also, changed some structures for better visualization.
This tutorial is using the sp3dev's precompiled kernel from here or rogro82's precompiled kernel from here. If you want to use rogro82's from scratch or from internal storage, please look, also, some instructions at here. Please note that you will have to build that kernel from sources before proceed. You should be able to use internal storage also, with some changes into this tutorial.
I used a phisical usb keyboard into this tutorial, but bodhi offers an onscreen keyboard into tablet profile. To change into this profile, look at here.
It's partially based into this tutorial. I'll refer to number of steps on that, so please open it. Please read everything before doing anything, and make sure you have no doubts about the process before doing anything. I'm not responsable if it damages your tablet!
First of all, download the Bodhi rootfs from here.
Then, run the first 3 steps from the tutorial above. Please note that if you'll run the rogro82's kernel, the step 2 should be flashing that kernel. For infos about how to flash the second kernel image, please read this thread's first post.
After, extract the Bodhi rootfs into the ext4 partition from your sdcard (I needed to be logged as root or use sudo for doing this step). Make sure to extract directly into the root of the partition (the result of a ls into the root of the partition should be just like running ls /).
Now, you need to donwload the zip file from step 6 from the tutorial. Note that it's not needed to install the packages asked by the step 6, just extract the donwloaded files and copy them into your sdcard's /lib/firmware folder. I just copied the brcm folder into /lib/firmware/brcm and it worked.
Now you are able to boot into the image. Put sdcard into the tablet and then boot from second kernel (hold VOL UP while powering on until it shows bootmenu and select boot into second kernel).
After complete booting, you should have the E17 home screen. For tutorials about this interface, please look into Bodhi website.
For being able to connect into wifi, I needed to open terminology (terminal application into bodhi) and run, as root, the following. Please note that it may not be necessary, but recommended:
- rfkill unblock all
- ifconfig
Now please see what number your wifi got loaded, for me, it was wlan2. I'll call it wlanx, so just change x for the number you got.
- ifconfig wlanx up
To make sure it worked, run "iwlist wlanx scan". It should bring some network details into terminology.
Now open wicd, open preferences and make sure the wifi network is correctly set into wlanx. The default value is wlan0. Then, close preferences and click into reload. Now you should be able to select your network, set up the network preferences and then connect into it.
Now you should be able to install everything you want. As I read, bodhi uses a debian base for armhf version, so you can install anything you can install from debian. Chromium web browser is broken, and firefox is named iceweasel. The default midori web browser works fine, but I personally prefer iceweasel.
Thanks:
sp3dev, rogro82, Kevin Roscom, Forzaferrarileo (if I forgot someone, please tell me, I'll put your name here!)

i'd love to try this! does this run fairly well?:good:

For me it does. I have a class 10 sdcard.

guimendes said:
For me it does. I have a class 10 sdcard.
Click to expand...
Click to collapse
root password?

Tautvaldas said:
root password?
Click to expand...
Click to collapse
Please take a look at here: http://jeffhoogland.blogspot.nl/2012/12/bodhi-linux-armhf-rootfs.html
You can use sudo bash to root access. The password is bodhilinux. Then you can set root password.

Hey this is my first time installing linux on a tablet. Ive got the partitioned sd card, rootfs, kernel ready to go. just not famaliar with how to flash the kernel. Could you maybe give me an idea of those steps? For a first timer as far as android is concerned, the instructions can be a little vague. Thanks

adrock74 said:
Hey this is my first time installing linux on a tablet. Ive got the partitioned sd card, rootfs, kernel ready to go. just not famaliar with how to flash the kernel. Could you maybe give me an idea of those steps? For a first timer as far as android is concerned, the instructions can be a little vague. Thanks
Click to expand...
Click to collapse
Please, first, make sure you're using this bootloader for dualboot. Into the thread there are all instructions for flashing the kernel into secboot, on dualboot section, into first post.

Ive been on v8 unlbootloader for awhile. Just never flashed a sec kernel before.

adrock74 said:
Ive been on v8 unlbootloader for awhile. Just never flashed a sec kernel before.
Click to expand...
Click to collapse
download the fastboot package ( from xda , or search on google ) , next connect the tablet with usb to the pc , reboot the tablet with the bootloader menu and select fastboot ...... the pc will install drivers , when it finish , go in the fastboot folder click SHIFT + right click and select "open command window here " and type this :
fastboot flash secboot <nameofkernel> ex : fastboot flash secboot boot.img

Forzaferrarileo said:
download the fastboot package ( from xda , or search on google ) , next connect the tablet with usb to the pc , reboot the tablet with the bootloader menu and select fastboot ...... the pc will install drivers , when it finish , go in the fastboot folder click SHIFT + right click and select "open command window here " and type this :
fastboot flash secboot <nameofkernel> ex : fastboot flash secboot boot.img
Click to expand...
Click to collapse
Thanks for the reply! Ive flashed this tablet seven ways to sunday within android, but this is kinda new to me. Recently installed 12.04 on my desktop as my intro to linux without a hiccup. I cant seem to get the tablet to respond to my computer. Have the sd card setup ready to go, terminal only says file does not exist ( in regards to secboot) should sd be in tablet or usb? Ive been at it all day. Should i rename anything? Thanks again.
---------- Post added at 04:43 PM ---------- Previous post was at 04:35 PM ----------
I Simply cant seem to get the kernel flashed. Once i get past that, i believe its smooth sailing..

adrock74 said:
Thanks for the reply! Ive flashed this tablet seven ways to sunday within android, but this is kinda new to me. Recently installed 12.04 on my desktop as my intro to linux without a hiccup. I cant seem to get the tablet to respond to my computer. Have the sd card setup ready to go, terminal only says file does not exist ( in regards to secboot) should sd be in tablet or usb? Ive been at it all day. Should i rename anything? Thanks again.
---------- Post added at 04:43 PM ---------- Previous post was at 04:35 PM ----------
I Simply cant seem to get the kernel flashed. Once i get past that, i believe its smooth sailing..
Click to expand...
Click to collapse
Please look if fastboot recognized your tablet. Run fastboot devices. If there's an answer, then your tablet was recognized. It can be missing drivers. From acer site it's possible to find the correct drivers.

ok. so not having the acer drivers seems to be my issue. But, Im trying to do this using my pc running ubuntu, and I'm not sure how to get the acer drivers installed on it. I'm sure there is a trick, but the downloads are for windows. And also the downloads are for honeycomb and ics and im running 4.2.2.

Well I cannot help you installing drivers into ubuntu, I made it into Windows.

on android terminal emulator:
cat /proc/mounts
make sure that data is on /dev/block/mmcblk0p8 not p7
if so then:
dd if=your_second_boot.img of=/dev/block/mmcblk0p7
do it within android, not within linux or initial ramdisk console on you tablet, because linux recognize data as /dev/mmcblk0p7. sorry for bad English.

Tautvaldas said:
on android terminal emulator:
cat /proc/mounts
make sure that data is on /dev/block/mmcblk0p8 not p7
if so then:
dd if=your_second_boot.img of=/dev/block/mmcblk0p7
do it within android, not within linux or initial ramdisk console on you tablet, because linux recognize data as /dev/mmcblk0p7. sorry for bad English.
Click to expand...
Click to collapse
thanks for the response, what will this be doing??

adrock74 said:
thanks for the response, what will this be doing??
Click to expand...
Click to collapse
It'll flash the kernel into the correct partition, via android.

guimendes said:
It'll flash the kernel into the correct partition, via android.
Click to expand...
Click to collapse
ok gotcha. Sorry to be a bother, but i want to do this. Right now ive got my kernel and rootfs on a partitioned sd card in my extsd slot. If I flash the kernel using terminal, where should it be?

adrock74 said:
ok gotcha. Sorry to be a bother, but i want to do this. Right now ive got my kernel and rootfs on a partitioned sd card in my extsd slot. If I flash the kernel using terminal, where should it be?
Click to expand...
Click to collapse
If you follow strict what Tautvaldas said, it'll be placed in the right place for dualbooting, the same if you use fastboot tool.

Thanks for your help guys. But mixing and matching this and that, i give up. Ive flashed the sh*t out of this tab, but without a unified tutorial, i cant make sense of this. Ive been running linux on my pc and laptop, so this isnt foreign to me, but i need a more straight forward tutorial. Thanks though again. We all have to learn sometime:good:

I ran a dist-upgrade on it and my wifi now seems broken - rfkill can unblock it but ifconfig returns SIOsomething something error, permission denied. Ideas?

VS980 won't start up

Accidental OTA on custom rom. I have tried other posts but nothing works so far. Can someone please help.

Does the phone turn on and show LG?
Sent from my LG-VS980 using Tapatalk

lilxman said:
Does the phone turn on and show LG?
Sent from my LG-VS980 using Tapatalk
Click to expand...
Click to collapse
What happens when you use anything in CWM?

SmurFFF said:
Accidental OTA on custom rom. I have tried other posts but nothing works so far. Can someone please help.
Click to expand...
Click to collapse
the link below will allow you to revert back to stock unrooted 11A.
after that you can take the OTA to 12B, reroot via IORoot and then use FreeGee to install recovery of your choice.
This has saved my phone a couple times from me getting too cocky with screwing around with things i don't fully understand but think I do.
http://forum.xda-developers.com/showthread.php?t=2448960

no download mode
WolfmanJack said:
the link below will allow you to revert back to stock unrooted 11A.
after that you can take the OTA to 12B, reroot via IORoot and then use FreeGee to install recovery of your choice.
This has saved my phone a couple times from me getting too cocky with screwing around with things i don't fully understand but think I do.
http://forum.xda-developers.com/showthread.php?t=2448960
Click to expand...
Click to collapse
cant boot into download mode

lilxman said:
Does the phone turn on and show LG?
Sent from my LG-VS980 using Tapatalk
Click to expand...
Click to collapse
it boots straight into cwm usually, sometimes stuck in lg logo

Hmm OK. At work now, I will look into it when I get home. Just throwing this out there cause it caught me, you just press the volume up button, hold it down, then plug in the USB cable with the LG flash tool open and configured. I kept holding the power button down as well.
Sent from my LG-VS980 using xda app-developers app

staticx57 said:
What happens when you use anything in CWM?
Click to expand...
Click to collapse
i tried flashing new rom but says loki not supported or something

WolfmanJack said:
Hmm OK. At work now, I will look into it when I get home. Just throwing this out there cause it caught me, you just press the volume up button, hold it down, then plug in the USB cable with the LG flash tool open and configured. I kept holding the power button down as well.
Sent from my LG-VS980 using xda app-developers app
Click to expand...
Click to collapse
how do i log into flash tool

SmurFFF said:
how do i log into flash tool
Click to expand...
Click to collapse
Reread the thread there is a file you need to replace that corrects that. Uninstall it, reinstall, replace the file and then attempt to open.

WolfmanJack said:
Reread the thread there is a file you need to replace that corrects that. Uninstall it, reinstall, replace the file and then attempt to open.
Click to expand...
Click to collapse
still no download mode

SmurFFF said:
still no download mode
Click to expand...
Click to collapse
Ok man here ya go, did some digging around here and found these two threads that may help you.
First is a means of pushing TWRP via ADB, not sure if that is the answer for you by you never know till you try.
Second is a means of using Ubuntu or a VM to replace the corruption caused by OTA
http://forum.xda-developers.com/showthread.php?t=2449670
http://forum.xda-developers.com/showthread.php?t=2582142
If those do not work either the only other thing I could think to do would be to get on the lg-g2 IRC channel and request help from a dev that is online.

WolfmanJack said:
Ok man here ya go, did some digging around here and found these two threads that may help you.
First is a means of pushing TWRP via ADB, not sure if that is the answer for you by you never know till you try.
Second is a means of using Ubuntu or a VM to replace the corruption caused by OTA
http://forum.xda-developers.com/showthread.php?t=2449670
http://forum.xda-developers.com/showthread.php?t=2582142
If those do not work either the only other thing I could think to do would be to get on the lg-g2 IRC channel and request help from a dev that is online.
Click to expand...
Click to collapse
i have never done an adb before is there any way u could help

SmurFFF said:
i have never done an adb before is there any way u could help
Click to expand...
Click to collapse
There is a pretty detailed guide somewhere on the forum. I will locate it, read through it and add to it if need be bro.

WolfmanJack said:
There is a pretty detailed guide somewhere on the forum. I will locate it, read through it and add to it if need be bro.
Click to expand...
Click to collapse
thanks sorry about all the questions

SmurFFF said:
thanks sorry about all the questions
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2141817
No worries on the questions man, here is the guide I was talking about. It is pretty straight forward but some areas you may have questions I will let you know what I did.
At one point it talks about setting up system variables or something to that effect. I did not perform this step.
When you open the SDK manager and look at all the packages that are listed it can get a little confusing, for me I just selected all and let the install run it's course. ( took about 20mins ).
Once the install is good it talks about moving a copy of command prompt to the platform tools folder. Not trying to insult your intelligence but it is that simple. Just locate where the .exe for command promt on your computer is, copy it and paste in the platform tools folder.
Once that is done turn your phone on and then plug the phone into your computer. Open the command prompt from the platform tools folder and then type the following:
adb devices
it should populate some brief info about your phone. If not then usb debugging is not enabled on the device. This is why I think this one may not work for you because if it isn't already enabled not sure if there would be a way for you to enable it with the state your device is in, but there are two other ways in the TWRP guide that i already posted about that may work plus the second thread talking about using ubuntu.

WolfmanJack said:
http://forum.xda-developers.com/showthread.php?t=2141817
No worries on the questions man, here is the guide I was talking about. It is pretty straight forward but some areas you may have questions I will let you know what I did.
At one point it talks about setting up system variables or something to that effect. I did not perform this step.
When you open the SDK manager and look at all the packages that are listed it can get a little confusing, for me I just selected all and let the install run it's course. ( took about 20mins ).
Once the install is good it talks about moving a copy of command prompt to the platform tools folder. Not trying to insult your intelligence but it is that simple. Just locate where the .exe for command promt on your computer is, copy it and paste in the platform tools folder.
Once that is done turn your phone on and then plug the phone into your computer. Open the command prompt from the platform tools folder and then type the following:
adb devices
it should populate some brief info about your phone. If not then usb debugging is not enabled on the device. This is why I think this one may not work for you because if it isn't already enabled not sure if there would be a way for you to enable it with the state your device is in, but there are two other ways in the TWRP guide that i already posted about that may work plus the second thread talking about using ubuntu.
Click to expand...
Click to collapse
Ive done everything it said but i cant get it to recognize adb as a command

SmurFFF said:
Ive done everything it said but i cant get it to recognize adb as a command
Click to expand...
Click to collapse
Does it say:
"adb" is not recognized as an internal or external command, operable program or bath file
If so the command promt isnt executing from the platform tools.
attatched is a screenshot of two CMD windows, look at the location listed before where what you type in shows up.
the location on the left is from the cmd opened from the platform tools folder, the one on the right is from opening up command prompt from where it is originally located on my computer. when you open yours compare the locations and let me know what you got.

WolfmanJack said:
Does it say:
"adb" is not recognized as an internal or external command, operable program or bath file
If so the command promt isnt executing from the platform tools.
attatched is a screenshot of two CMD windows, look at the location listed before where what you type in shows up.
the location on the left is from the cmd opened from the platform tools folder, the one on the right is from opening up command prompt from where it is originally located on my computer. when you open yours compare the locations and let me know what you got.
Click to expand...
Click to collapse
im on windows 8 and when i try to find the cmd application i only get a shortcut?

not sure if it differs in windows 8 or not but I know i 7 and older versions it is located C:/windows/system32
also when you copied it did you select paste shortcut or just paste? If you selected paste shortcut that may be your issue, i selected paste and it populates as its own .exe not a short cut. Let me know what you get.