Database Users

HD2 bricked ? Attempted to install UK WWE 1.66 onto Voda HD2 with HPSL

Help!
First time attempt at using HPSL and may have bricked my HD2 :-(
I have a Voda supplied HD2 so can't install the stock ROMs directly...I thought I would be able to do so via HPSL, but it seems not. I was trying to install 1.66 (UK WWE) following the HPSL for dummies guide, and did the following:
- installed HPSL onto HD2, confirmed by going into bootloader
- put nbh file (extracted from stock .exe) onto SD card, named LEOIMG.nbh
- entered bootloader and chose flash option via power button
- flash started (minimal progress)
- within 2mins error showed
- now going into bootloader shows
00028002
Not allow
then..
SPL-1.42.0000 :-(
Upgrade ROM code error Please try again
If I start normally I get a warning triangle.
How can I get my HD2 back from the dead, ideally with 1.66 rather than the crummy Voda 1.43? (can anyone point me at a stock ROM for the voda 1.43, perhaps that would at least unbrick it?)
Help!!!!
*EDIT* Currently downloading the Voda 1.43 image, hoping I can at least get that back and running...if that works will still be keen to find out how to apply stock 1.66 via HPSL (bearing in mind that the CID lock(?) means I can't apply 1.66 on my voda device thru normal means)

CraigBruce said:
(can anyone point me at a stock ROM for the voda 1.43, perhaps that would at least unbrick it?)Help!!!!
Click to expand...
Click to collapse
The 3rd sticky down in the HD2 ROM Development thread is titled, "[REF]Leo Official ROMs" - Click that.
Then click, "Shared folder for shipped Leo ROMs".
The first "box" will have the title "Leo 1.43" under it. Click the hand carrying the folder icon.
You'll be greeted with 3 ROM's, select RUU_Leo_Vodafone_UK_1.43.405.1_Radio_Signed_15.26. 50.07U_2.04.50.22_2_Ship.exe and download it.
Hope that helps.
Good luck with getting your phone back up and running.

Your device is not bricked. I think you have not installed HSPL properly.
Try installing HSPL again. As it seems your HSPL is not installed properly. Follow the following instructions very carefully :
Connect your phone to USB
I think when you boot in by default your device goes into bootloader if not press volume down + power butoon on the same time, your phone will enter tri color bootloader mode.
At the bottom of your screen it shoul show "USB"
Now download the HSPL.zip file(I have attached it here)
Now run HSPL.exe and follow the onscreen insteuctions.(Mostly you have nothing to do it will start installing automatically)
After a while on the screen of your phone a text will appear saying "We hacked it". If this text is displayed then everything went ok. Now confirm by clicking yes on the computer screen and it will finish the process.
All done.
Your phone will restart.
If you want to check that your fone has HSPL then press volume down+power key at the same time. The phone will enter into bootloader and should show "cotullaHSPL".
Now you can install any ROM and it will run properly.

Thanks - had just found that and started downloading as you posted this..fingers crossed! If this works will still be keen on ways to apply 1.66 (stock) to my voda CID locked device.

ankush1492 said:
Your device is not bricked. I think you have not installed HSPL properly.
<snip>
After a while on the screen of your phone a text will appear saying "We hacked it". If this text is displayed then everything went ok. Now confirm by clicking yes on the computer screen and it will finish the process.
All done.
Your phone will restart.
If you want to check that your fone has HSPL then press volume down+power key at the same time. The phone will enter into bootloader and should show "cotullaHSPL".
Click to expand...
Click to collapse
This is exactly what happened 1st time I installed HSPL...however trying it again did get the phone back and apparenty healthy again....thanks!
So - 2nd attempt to flash the 1.66 ROM, same as before. Confirmed HSPL installed via tri-colour bootloader screen, selected (via power button) option to flash from SD. Progress bar gets to (max) 10%, Warning triangle briefly shows then phone goes back to tricolour bootloader (but with std. SPL version) and nothing more happens.
Should I be waiting longer ? i.e. is the phone potentially still flashing when on the tricolour, std. SPL, screen ? Not flashed an HD2 before so not 100% sure I'm doing this right..will double check videos on this site, sure I'm just being stupid/impatient/not read enough....may try downloading the ROM again incase corrupted.
Anyway, HSPL installed for 3rd time and phone appears fine back running with 1.43.

People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.

CraigBruce said:
This is exactly what happened 1st time I installed HSPL...however trying it again did get the phone back and apparenty healthy again....thanks!
So - 2nd attempt to flash the 1.66 ROM, same as before. Confirmed HSPL installed via tri-colour bootloader screen, selected (via power button) option to flash from SD. Progress bar gets to (max) 10%, Warning triangle briefly shows then phone goes back to tricolour bootloader (but with std. SPL version) and nothing more happens.
Should I be waiting longer ? i.e. is the phone potentially still flashing when on the tricolour, std. SPL, screen ? Not flashed an HD2 before so not 100% sure I'm doing this right..will double check videos on this site, sure I'm just being stupid/impatient/not read enough....may try downloading the ROM again incase corrupted.
Anyway, HSPL installed for 3rd time and phone appears fine back running with 1.43.
Click to expand...
Click to collapse
Yeah, the 1.66 ROM you've downloaded may be corrupted. And next time, try installing the ROM with USB connection and the ROM's .exe file. You SPL is reverting back to stock, so it's possible that the culprit is flashing with SD.

OK, problem solved...
Rather than installing the stock ROM via HSPL bootloader I installed HSPL and then ran the RUU exe for the stock ROM. Phone now upgraded

dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
Thats not true, you can flash custom roms with hspl from an sd card
see my video *here*

dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
[★] said:
Thats not true, you can flash custom roms with hspl from an sd card
see my video *here*
Click to expand...
Click to collapse
I believe Dragon Soft was possibly referring to not using a stock ROM from SD? If I remember correctly flashing a Stock ROM from SD with HSPL on will remove HSPL.
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Custom ROM absolutely no probs with flashing from SD, the HSPL will stay intact, good work on the video ★

CraigBruce said:
OK, problem solved...
Rather than installing the stock ROM via HSPL bootloader I installed HSPL and then ran the RUU exe for the stock ROM. Phone now upgraded
Click to expand...
Click to collapse
Ok. I think you were trying to install official ROM. When you install an official rom your bootloader will revert back to SPL...
dragon_soft said:
People please read the HSPL thread properly, once you have installed the HSPL you CANNOT install from SD card you HAVE TO USE THE PC to install any rom images that are not original HTC.
Click to expand...
Click to collapse
thats not true. After HSPL you can intall directly from sd card..I have done it almost 100 times.

Ibb1982 said:
I believe Dragon Soft was possibly referring to not using a stock ROM from SD? If I remember correctly flashing a Stock ROM from SD with HSPL on will remove HSPL.
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Custom ROM absolutely no probs with flashing from SD, the HSPL will stay intact, good work on the video ★
Click to expand...
Click to collapse
Well if he does mean that then fair enough, I just thought that he meant custom when he said "that are not official" but whatever, sorry for the mis understanding

Ibb1982 said:
So in other words, if you have HSPL and want to have a stock ROM, it is best install it from the PC when connected via ActiveSync as this won't affect the HSPL.
Click to expand...
Click to collapse
I got my Leo two days ago, went home, put HSPL on it in the first place, wanted to upgrade the stock ROM, and ended up same as CraigBruce. Really frustrating, thought I'd bricked it. So I re-flashed HSPL and this time a custom ROM and it was back up again.
Now I know that I should have flashed the stock ROM via ActiveSync and not SD card which would have left the HSPL intact. I will definitely remember that for the future

just remember that some people WANT to remove HSPL when installing a stock ROM - e.g. when returning device.
tbh it should have worked with stock ROM and sdcard as leoimg.nbh - it is the way listed in HSPL thread to uninstall after all!!! we dont always want to use customRUU!!!
As from the noob flashing thread
NOTE: The only way to remove the HSPL is to flash an original SPL from microSD card
* You can also use this method to flash back your Stock Rom and Stock SPL that you originally had on your phone*
VIDEO TUTORIAL: [★] has made a YouTube video to walk people through flashing a Stock SPL via activesync. Find it *HERE*
- Download a shipped Rom from *HERE*
- Rename the extension to .zip
- open it with winzip and extract the RUU_signed.nbh file to a folder
- Rename it to LEOIMG.nbh and copy it to the root of a microSD card thats been formatted to FAT32
- Insert your storage card into your phone
- Enter Bootloader and follow onscreen instructions to flash
Click to expand...
Click to collapse

Guys, I had reached the exact same issue with the NOT ALLOW problem. And people, we do read some times (the newbies) and nowhere but here you say that AFTER HSPL YOU MUST NOT UGPRADE FROM MEMORY CARD!!!! And NO it is not included inhere: http://forum.xda-developers.com/showthread.php?t=609477
Cheers,
and thanks to all the smart people inhere!
D

thug_life_inc said:
Guys, I had reached the exact same issue with the NOT ALLOW problem. And people, we do read some times (the newbies) and nowhere but here you say that AFTER HSPL YOU MUST NOT UGPRADE FROM MEMORY CARD!!!! And NO it is not included inhere: http://forum.xda-developers.com/showthread.php?t=609477
Cheers,
and thanks to all the smart people inhere!
D
Click to expand...
Click to collapse
With hspl installed you CAN flash CUSTOM roms using sd card, it is only flashing OFFICIAL roms through sd card that removes hspl.

sorry to crash this thread but...
i have flashed HSPL on to my HD2 and am now wanting to install HTC's new 1.66 rom.
i have a VF hd2 so i am a little worried i will hit the same issues as the OP did.
can some one hold my hand through flashing the ROM as im a complete noob to this.. i have read the FAQs and im a bit like with all the acronyms etc

adam_r said:
sorry to crash this thread but...
i have flashed HSPL on to my HD2 and am now wanting to install HTC's new 1.66 rom.
i have a VF hd2 so i am a little worried i will hit the same issues as the OP did.
can some one hold my hand through flashing the ROM as im a complete noob to this.. i have read the FAQs and im a bit like with all the acronyms etc
Click to expand...
Click to collapse
Use the custom ruu to flash it. Do not put the nbh on the sd. I quote from the "[HSPL]How to flash everything" thread:
4) Uninstallation
Only way to remove the HSPL is to flash an original SPL from SD card.
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
Click to expand...
Click to collapse
Why people cant read? refering to the person who started this thread.

No Problem Flashhing to 1.66 on a Voda HD2 with HSPL
I have a voda HD2 and being a total Newbie to the HTC / WM .. I followed the Dummie guide.. (thanx to all, for that.. fantastic..) installed HSPL..and then installed the latest 1.66 from the HTC site using a boggus serial number.. As actual would not let me download it. No problemo..
Feeling a bit more adventureous.. any suggestions for the best 'cooked Rom' ??

From my understanding, you can flash away Stock ROMS using activesync. No need for HSPL.

How can I reset my phone back to stock & update it.

I tried a few cooked roms and I like some things about them and others I dont, so I was going to flash my phone back to stock and if there are any upgrades/updates I would like to do so also.... Please advise me, should I do this why or why not... and How can I go about doing this ? (Would I just use hspl2 1024 and reinstall 2.08 first, then install the latest stock rom ? -but where can I find the latest official stock rom?-can I get it from htc? )....
thanks in adavance...

If you have already run hspl2 there is no need to do it again. All you need to do is download the shipped rom (available here and at ppcgeeks.com) and flash it. There haven't been any updates for the stock rom as of yet. Your personal choice on if you want custom rom or stock. Custom roms usually have less bloatware and performance enhancements that make them ideal over the stock rom.
Link to stock rom: http://forum.xda-developers.com/showthread.php?t=653938&highlight=tmobile

looking for help
I installed hspl 2.08.0000 and flashed a custom rom, then I tried to flashed a vodafone Uk shipped Rom and now my Hd2 won't even boot up, when I connect it to the usb windows xp sees the device and tries to install a driver but then fails to find a driver. I cant even use mtty because usb is not listed as one of the selections. does anyone know how to help Please

Could be because you flashed a shipped rom that is for a different device. The european HD2 is different than the US HD2. If you have a US HD2 flash a rom that is designed for 1024 Leo (recommend Miri and Steve's Eleganicia). Put the phone in bootloader and then flash from pc or you can rename the .nbh from a rom to LEOIMG.nbh and place that in the root of your storage card to flash. Can get to bootloader by holding volume down and pressing the reset button under the back cover, holding vol key til tri-colored screen appears.

it wont let me get into bootloader mode, my computer does see the hd2 but wont let me access the usb

Maybe someone else can chime to correct me if im wrong but sounds like you now have one expensive paper weight. Flashing a rom that is not for your phone is not good.

Flashing a Euro Rom on your TmoUS HD2 will brick your phone - for good. Why are so many people doing this?

tmo are sure to get wise to this and stop replacing them at this rate. I've seen 6 or 7 people with the same problem in two days.
Guys with a tmous,
1 - DONT flash any stock roms except the one from tmous. Stock roms include a radio and it will kill your phone.
2 - DONT flash any radio with a .51. in the version. It will kill your phone.
3 - dont flash any cooked rom not based on the 2.10 rom. It will kill your phone. (i think, , , possibly recoverable, not sure yet)
4 - most of all read first, flash later.

OK PLEASE do not hijack the topic,
Remember I asked how can I reset my phone back to completely stock (like when I first bought it).... and then after that I would like to update it (if there are any updates)....
Thanks for all the advice so far...

erebusting said:
OK PLEASE do not hijack the topic,
Remember I asked how can I reset my phone back to completely stock (like when I first bought it).... and then after that I would like to update it (if there are any updates)....
Thanks for all the advice so far...
Click to expand...
Click to collapse
2 ways.
1 - connect phone via USB, run hspl1024, choose spl 2.08.0000, thats your spl back to stock. Then flash the tmous 2.1 rom over usb, thats your radio and rom returned to stock.
2 - you can get the tmous 2.1 rom, extract the file ruu_signed.nbh, copy it to sd card, rename it leoimg.nbh and reset your phone, which will see the nbh file and flash it, and because it is from sd card it will also reset the spl (and radio) to stock.
i'd go for option 1, as i haven't read much about people flashing sd card on the tmous, so for now steer clear.

samsamuel said:
2 ways.
1 - connect phone via USB, run hspl1024, choose spl 2.08.0000, thats your spl back to stock. Then flash the tmous 2.1 rom over usb, thats your radio and rom returned to stock.
2 - you can get the tmous 2.1 rom, extract the file ruu_signed.nbh, copy it to sd card, rename it leoimg.nbh and reset your phone, which will see the nbh file and flash it, and because it is from sd card it will also reset the spl (and radio) to stock.
i'd go for option 1, as i haven't read much about people flashing sd card on the tmous, so for now steer clear.
Click to expand...
Click to collapse
thank you... so will this unvoid my warranty?

erebusting said:
thank you... so will this unvoid my warranty?
Click to expand...
Click to collapse
it's the spl that voids the warranty, not the rom. when you boot to bootloader, so long as it says
spl 2.08.0000
then you are good to go.

Thank you!

straight answer

I have been reading alot of different info on the latest update changing your spl.One thread read if you did it via sd card you will not be able to go back and put the hspl,others read if you did it via usb you can go back.I did update and it changed my spl to 2.10,can or cannot go back and change back to 2.08 hspl.thanks for the help and info on this subject.

ping33tx said:
I have been reading alot of different info on the latest update changing your spl.One thread read if you did it via sd card you will not be able to go back and put the hspl,others read if you did it via usb you can go back.I did update and it changed my spl to 2.10,can or cannot go back and change back to 2.08 hspl.thanks for the help and info on this subject.
Click to expand...
Click to collapse
If you Flash the 2.10 rom by sd card then it will change your spl back to 2.08 and then redo the HSPL and you can use custom roms again

Hey zelendel,i'm sorry for not giving the right info,the rom was tmobile's 2.13. and looking at my setting are as followed, rom version-2.13.531.1 radio version-2.10.50.26.i have read several threads one stated something close to what you stated above,and other saying if flashed using a sd card then you are stuck,im still learning and reading as much as i can with out having to post something that would already be posted.So just for FYI i hit the reset button and did the volume and end button to pull up the bootloader screen i show 2.10 on the spl.I guess it would be safe to say that i should what for a hspl for 2.10 to come out instead testing? again thanks for all the patiences.

ping33tx said:
Hey zelendel,i'm sorry for not giving the right info,the rom was tmobile's 2.13. and looking at my setting are as followed, rom version-2.13.531.1 radio version-2.10.50.26.i have read several threads one stated something close to what you stated above,and other saying if flashed using a sd card then you are stuck,im still learning and reading as much as i can with out having to post something that would already be posted.So just for FYI i hit the reset button and did the volume and end button to pull up the bootloader screen i show 2.10 on the spl.I guess it would be safe to say that i should what for a hspl for 2.10 to come out instead testing? again thanks for all the patiences.
Click to expand...
Click to collapse
Is ok this rom update has been causing issues all over the place. So here is what you do. Grab the 2.10 rom from HERE (the one WITH spl) and flash it by the SD card method. Once that is dont then you can run HSPL again and flash custom roms again

zelendel said:
Is ok this rom update has been causing issues all over the place. So here is what you do. Grab the 2.10 rom from HERE (the one WITH spl) and flash it by the SD card method. Once that is dont then you can run HSPL again and flash custom roms again
Click to expand...
Click to collapse
Alrighty well do and sounds like something i can do i hope,Thanks you for all the advice and help have a good weekend.

Hi zelendel i'm alittle confused on the rom 2.10 with spl,to flash it i need to rename it LEOIMG.nbh right? when i downloaded rom 2.10 it's a exe.file do i just rename the whole thing LEOIMG.nbh? i just want to make sure before i start,i'm working nites so this is giving me something to do lol,anyway thanks alot.
I am doing something wrong renamed the file LEOIMG.nbh n all i get is a white screen with loading and nothing happening i hit the reset button and it goes back normal,anyhow i'll work on it more thanks.

right click the exe and choose extract here
look through the extracted files for one called ruu signed.nbh
that is the file you rename and put on your sd.

samsamuel said:
right click the exe and choose extract here
look through the extracted files for one called ruu signed.nbh
that is the file you rename and put on your sd.
Click to expand...
Click to collapse
Alrighty i got ya thank you trying right now wish me luck lol my hands are shaking lol so far got radio-ok rcust-ok,bootloader-ok,splash-ok, waiting on OS and configdata-alrighty all done and thanks guys for the patience and the walk thru's again thanks and hopefully what i have learned i can help others in the future, take care ping33tx

[Q] Restoring to Factory Settings

Hey guys,
So my HD2 recently started having the same issue a lot of you guys are having with the touchscreen just dying or being very unreliable. This past week I've had trouble getting past the lock screen and today it takes me half an hour to a full hour of attempts to make it past the lock. Once I do, however, the screen works fine until it's locked again.
I'm about two weeks away from warranty ending, so I want to get this bad boy sent in ASAP. A year ago I flashed a custom ROM onto the phone and haven't modified it until this morning when I installed MAGLDR 1.13 and NAND Android ROM. The new ROM worked great but didn't resolve the touchscreen issue at all.
What I want to do is completely restore the phone to how I bought it from T-Mobile US a year ago. I don't want the replacement voided because of the custom ROM, though it clearly has nothing to do with the error.
Not being very technically proficient with this stuff (aside form the dozens of hours I've spent reading up), what is the best way to go about this?
So far I tried doing a Hard Reset manually via the VolUpDown/EndCall button boot, but that just booted me into NANDroid after the reset. I tried downloading WinMo from the T-Mo site, but it's asking for a phone identification number I can't access because of the lack of touchscreen access.
Any help/advice you guys can offer would be really appreciated. Thanks in advance!

You can get the IMEI number from behind the battery to download the rom from t-mobile.
This was explained to me by another member here
Right click the ROM file you download from the T-mobile site and rename the .exe to a .zip and then you can explore the file to find the RUU_signed.nbh file. You want to copy the RUU_signed.nbh file to the root of your SD card (make sure it has been formated to FAT32) and rename the file to LEOIMG.nbh. then place the SD card in the HD2. Boot the HD2 imto bootloader and as soon as you see searching on the screen let the volume down button go. It should ask if you want to flash the imageand you will have to press the end button to confirm and it will flash the ROM.

bnd10706 said:
You can get the IMEI number from behind the battery to download the rom from t-mobile.
This was explained to me by another member here
Right click the ROM file you download from the T-mobile site and rename the .exe to a .zip and then you can explore the file to find the RUU_signed.nbh file. You want to copy the RUU_signed.nbh file to the root of your SD card (make sure it has been formated to FAT32) and rename the file to LEOIMG.nbh. then place the SD card in the HD2. Boot the HD2 imto bootloader and as soon as you see searching on the screen let the volume down button go. It should ask if you want to flash the imageand you will have to press the end button to confirm and it will flash the ROM.
Click to expand...
Click to collapse
I seriously owe you a beer, this solution worked flawlessly. Thank you!!

Hi ... this is exactly what i need to do, but my problem is I don't have my SD card in my phone anymore. I forgot my phone at home ... and this is my go to phone when I forget things!!! I flashed the phone, and now it's not going to work the way that I need to without the card. Anyway of reseting the phone?? Please help!

Flash over usb, then use hspl 4 to set stock spl.

samsamuel said:
Flash over usb, then use hspl 4 to set stock spl.
Click to expand...
Click to collapse
How exactly do i get hspl 4?
It's been a long time since i flashed anything and played around with my phone.

look at the links in my sig, you want the one that says HSPL4

samsamuel said:
look at the links in my sig, you want the one that says HSPL4
Click to expand...
Click to collapse
ok... thanks so much for that...
what about some instructions?

phoneoff-power+voldown-releasepowerkeepholdingvoldown-stripedscreen-insert usb-whenserialchangestousbinsertusb-runhspl4(rightclickrunasadministrator)-choose2.08.0000or3.03.0000asyoulike-whenphonerebootsimmediatelyholdvoldowntoreenterbootloader(stripedscreen)-waitforserial-->USB-runthestockromupdateyoudownloaded.
or, simplified
bootloader - run hspl4 - set desired spl - bootloader - flash stock rom - sit back all smug.

How do I change back to Windows Mobile

I am having my phone serviced by HTC at no cost. I need to revert it back to Factory but do not have a nand or sd back up for Win6.5. I have tried the search feature and cannot find anything. Can someone help me before I send it back tomorrow. THanks

mahgninnuc93 said:
I am having my phone serviced by HTC at no cost. I need to revert it back to Factory but do not have a nand or sd back up for Win6.5. I have tried the search feature and cannot find anything. Can someone help me before I send it back tomorrow. THanks
Click to expand...
Click to collapse
Flash your stock rom using sd method.

1) Download stock WM6.5 ROM here
2) copy downloaded "LEOIMG.nbh" to the ROOT of your sd card (just on your sd card, not in one folder)
3) turn phone off, hold volume-down and start your phone
4) the HD2 should recognice the LEOIMG.nbh automatically and flash the stock wm6.5 ROM with original radio ROM (i think).
5) after its done, delete the LEOIMG.nbh on your sd card and follow step 3 again. make sure that you have "SPL blahblah" and not "HSPL 2.08" (or whatever).
optional 6) turn phone off, hold volume up AND down, start your phone to hard-reset it.
should be all you have to do. maybe check your radio rom if its the right one.

Unfortunately I don't have a stock ROM. The person who.did my original switch to android dent save one. Is there a place I can download a ROM that is stock?
kroolas said:
Flash your stock rom using sd method.
Click to expand...
Click to collapse
Sent from my Nexus One using XDA App

mahgninnuc93 said:
Unfortunately I don't have a stock ROM. The person who.did my original switch to android dent save one. Is there a place I can download a ROM that is stock?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Go to htc.com and using your device's serial number download a rom

Thanks Marv, will I be able to to that with the SD card method? I can't get into bootloader holding the volume button.
Sent from my Nexus One using XDA App

Wait for pReXx or other experienced member, I know nothing about sd flash or not being able to go into bootloader, I only knew how to get a stock ROM .
[Size=-7](P.S. I thanked those who have helped you, next time you do it )[/size]

Quick note about post 3,,, if you have a tmous BEWARE of downloading random. Nbh files,,,, if that link is to a non tmous stock rom and you flash it, the phone will be bricked.

mahgninnuc93 said:
Thanks Marv, will I be able to to that with the SD card method? I can't get into bootloader holding the volume button.
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Yes, but you have to rename the downloaded file from .exe to .zip .. then unzip it, locate the .nbh file, extract it then rename it to LEOIMG.nbh and proceed.
@sam he's downloading off htc.com, could they provide an incompatible radio (in a rom) ?

Marvlesz said:
@sam he's downloading off htc.com, could they provide an incompatible radio (in a rom) ?
Click to expand...
Click to collapse
Absolutely. Until very recently, when a tmous download page arrived on HTC.com, EVERY rom on the htc site would brick a tmous.
Every non tmous stock rom, whether generic unbranded or operator branded, will brick a tmous because of the radio it includes. They all contain x.xx.51.xx radios whilst tmous roms ALL contain x.xx.50.xx, and a few minutes reading will tell you that ANY ..51.. radio will instantly kill a tmous. Unfixable without JTAG or new mainboard.
The only exceptions to the 51/50 rule are radios 2.04.50 (included in the UK O2 1,43 rom, for example), 2.05.50 (and i think 2.06.50) which, although they are ..50.. radios, are actually regular hd2 radios and will still brick a tmous.
As for the 2.15.50 radio that comes with ver 3.14 roms, that radio wont brick a tmous, but the regular 3.14 rom will not boot on a tmous, it will hang at the splash.
The regular hd2, on teh other hand can take any hd2 radio, 50 or 51, plus the tmous roms will boot fine on a regular hd2.
mahgninnuc93 said:
will I be able to to that with the SD card method? I can't get into bootloader holding the volume button.
Click to expand...
Click to collapse
no, you need to be able to enter bootloader to start a flash.