2 questions pls - HD2 General

hey guys i have 2 questions for u ...i'll be glad if u'll be able to help me .
1st Q- sometimes im listening to music using my earphones. im putting the phone itself on vibrate , and then changing the volume of the song by pressing on the volume buttons on the side of the phone . i see the tab which has 2 parts - system and ringer . im changing the system only , and the ringer is still on Vib. but when i have a phone call its ringing .. am i doing something wrong ?
2nd Q- on the main screen , on the middle,there is the clock and weather.
when pressing on it , i can see 2 options :" my current location " and also the name of the city where i am. sometimes , instead of writing the name of the city ,, its writing " my current location " and i have to change it.
i doiwnloaded a fix someone posted here , but it helped me only for the weather tab , to remove th current location from the locations list.
how can i fix it also regarding the clock ?
sorry for the length i was trying to make it as clear as possibe

there is an option in the sound menu to make volume control for system and ring the same i would suggest you do that then when you put your phone on vibrate you will only have to do it once

Related

XDA Mini S does NOT ring anymore!

Hey everyone,
My XDA doesn't ring anymore when someone rings me.
If I go into phone options, I can change the ring tone, and they work in there using the play button. They are very low though, even when I put the phone's volume on max.
Then I go back to the home screen, try to ring my phone and it doesn't ring. The vibrate function still works and it still makes a noise when I get a text. Just nothing when it rings.
Any ideas? Cheers.
May be You already did it, but if your phone switched to "vibrate only"
mode?
fresh123breeze said:
May be You already did it, but if your phone switched to "vibrate only"
mode?
Click to expand...
Click to collapse
Nope, but thanks anyway mate.
Anyone? It's doing my nut in now!
OK, obvious things to try / questions etc:
Have you tried to soft reset?
Do you have a "profile changer" installed (pocket zen phone for example)
Is the ringtone selected on (tick in the box) (dumb question i know, but...)
Are you using a default tone? or one you have added youself?
If its a custom one, edit on PC and increase the amplitude (make it louder) - try again - any better?
Have you one anything / installed anything etc which caused this problem? if so what
Is the phone & master volume at max? if not try with them both up all the way
Beeble
Really good trouleshooting procedure!
Beeble said:
OK, obvious things to try / questions etc:
1. Have you tried to soft reset?
2. Do you have a "profile changer" installed (pocket zen phone for example)
3. Is the ringtone selected on (tick in the box) (dumb question i know, but...)
4. Are you using a default tone? or one you have added youself?
If its a custom one, edit on PC and increase the amplitude (make it louder) - try again - any better?
5. Have you one anything / installed anything etc which caused this problem? if so what
6. Is the phone & master volume at max? if not try with them both up all the way
Click to expand...
Click to collapse
Thanks a lot for this mate.
1. - Yes
2. - No
3. - Yes
4. - Tried both and tried making my custom one louder
5. - No
6. - Right, this is where we made some progress. I usually have my master volume set on the level above nothing (i.e. very low) and my phone setting on the lowest one. I assumed that this was the in-call volume. But I put it up a notch and the ringing was back. Yeah! So I assume it's the whole phone functions' volume and not just the in-call volume. I can see the logic but I'm not completely sold.
Anyway, you are a legend and I thank you very much.
bsterngillet said:
Beeble said:
OK, obvious things to try / questions etc:
1. Have you tried to soft reset?
2. Do you have a "profile changer" installed (pocket zen phone for example)
3. Is the ringtone selected on (tick in the box) (dumb question i know, but...)
4. Are you using a default tone? or one you have added youself?
If its a custom one, edit on PC and increase the amplitude (make it louder) - try again - any better?
5. Have you one anything / installed anything etc which caused this problem? if so what
6. Is the phone & master volume at max? if not try with them both up all the way
Click to expand...
Click to collapse
Thanks a lot for this mate.
1. - Yes
2. - No
3. - Yes
4. - Tried both and tried making my custom one louder
5. - No
6. - Right, this is where we made some progress. I usually have my master volume set on the level above nothing (i.e. very low) and my phone setting on the lowest one. I assumed that this was the in-call volume. But I put it up a notch and the ringing was back. Yeah! So I assume it's the whole phone functions' volume and not just the in-call volume. I can see the logic but I'm not completely sold.
Anyway, you are a legend and I thank you very much.
Click to expand...
Click to collapse
IIRC to adjust the in-call volume you must be in a call and then use the slider on the side of the wizard. i'm not 100% sure but this is as good as my brain can manage today
bsterngillet said:
Hey everyone,
My XDA doesn't ring anymore when someone rings me.
If I go into phone options, I can change the ring tone, and they work in there using the play button. They are very low though, even when I put the phone's volume on max.
Then I go back to the home screen, try to ring my phone and it doesn't ring. The vibrate function still works and it still makes a noise when I get a text. Just nothing when it rings.
Any ideas? Cheers.
Click to expand...
Click to collapse
hi, bsterngillet,
im also new to this here. just got my o2 min s last week. i just started tweaking it. i experienced the same situation as yours, and seemed to have figured out the problem.
with the original rom, AND without any program installed, the volume sliders behaviors are:
Master volume slider adjust Ringer, Notifications, Tap
Phone volume silder adjust Phone
however, upon installing "certain" programs (in my case, a language translation/inmput software "Monster Chinese 5.1"), the volume sliders behaviors altered as:
Master volume slider adjust Notifications, Tap
Phone volume silder adjust Ringer (but ALSO as a subset of Master Volume --- so it's like a old school mixer, master volume has an effect on the whole scheme of things)
The phone volume can then be altered during a call.
So, my settings now is:
Master volume slider = Halfway
Phone volume slider (i.e. ringer) = First click down from Max
Phone Voice volume= adjust as needed
hope this helps .... and hope this is correct.
I had a problem with this before...
I had been using my headphones prior to this though and when I put them back in and out it worked fine
Thanks to your thread i have been able to sort out exactly the same problem regarding vibrating but no volume. It did my nut in too, funny how there is usually a simple answer just around the corner.
Cheers
fergus

IPAQ 6940 - LONG Vibration

Hey everyone,
Had a question,
My phone, when on vibrate, does a good 10seconds for any text message, phone call, or what not - any ideas how to edit this - it's WAYY to long of a vibration and I end up needing to have the phone on silent.
Thanks,
~Maciek
if you have a 3prt profile app chack if there are settings regarding this issue ,you can also try diff ring and ring settings of the phone ,most likely you have a software that dose it ,try also to check on start/settings/sound & notification /notification if the settings are ok (play with it) as last option you can always backup your device prform hr and check this function (to know your device is ok) good luck with finding it
maciekl said:
Hey everyone,
Had a question,
My phone, when on vibrate, does a good 10seconds for any text message, phone call, or what not - any ideas how to edit this - it's WAYY to long of a vibration and I end up needing to have the phone on silent.
Thanks,
~Maciek
Click to expand...
Click to collapse
Yeah i find the vibrations to be way too long also. I wish there was a way to change it.

[Q] ringtone problem mute

sometimes when my phone rings i cant hear the ringtones only vibration i check this and the call volume is high i try to move the ringtone from sd to storage and the same problem.
i have noticed that my phone does that when it is turned over but i have disable the option from motions - turn over - mute,pause.
what can i do? please help me i have the phone 2 weeks and i update to 4.3 thnx u
Knowing the volume is high, what u can do is:
- Go to Apps, Settings, My device, Sound, Ringtones and click there
- Here u can add the ringtones u wish coz u have a button there called "Add"
- Add the tone u wish being in your SD Card or External Card and select it
- Try again to receive one call
- Click THANKS button if I could help ya
i have already custom ringtone and i put it like you say i try 3 deference ringtones Example in 10 calls 1 call is silent only vibrate and the other 9 calls is good high sound of my ringtone i dont understand it

Volume of microphone

Hi there.
How can I increase the volume of the microphone?
Can I adjust it in the service menu ?
The microphone is very quiet!
Many people do not understand me well because I'm so quiet ...
DönerXXL said:
The microphone is very quiet!
Many people do not understand me well because I'm so quiet ...
Click to expand...
Click to collapse
Hold the phone closer to your mouth when speaking? Especially if this happens when you use the phone in noisy environments. You can also go to the settings menu and try disabling the (call settings) noise suppression option.
The built in microphone has an automatic level control, so an external mic will do a lot better in unusual situations like this. You can set the mic gain in the service mode menu but it may have undesirable consequences, so you should leave that as a last resort. Moreover you still have to contend with the auto level if you are using the internal mic, so raising the mic gain would not be expected to help if there is high background noise levels.
.
Thanks for your answer.
Can you tell me how can i adjust it in the service menu ???
Change the setting in the "audio" submenu of the service mode page.
http://forum.xda-developers.com/showpost.php?p=53016274&postcount=50
.
So yes, I must say that I have the mini s5.
I have asked the question here because there here are more user.
I hope the menu is just the same.
So, I'm in the menu but how do I get into the submenu.
Hope you understand me.I writing all this with the google translator ...
Edit:
Need I root for the sub-menu ?
Menu - Back
Menu - Key Input - Q
Menu - Key Input - 0000
It opens nothing...
DönerXXL said:
So yes, I must say that I have the mini s5.
I have asked the question here because there here are more user.
I hope the menu is just the same.
So, I'm in the menu but how do I get into the submenu.
Hope you understand me.I writing all this with the google translator ...
Edit:
Need I root for the sub-menu ?
Menu - Back
Menu - Key Input - Q
Menu - Key Input - 0000
It opens nothing...
Click to expand...
Click to collapse
I am in the same situation ... i would like to open the "audio" submenu of the service mode but any of the key combinations i am trying work ... did you find any solution?

My Oneplus changes my choice of tone and sound

Hi everyone....
I have Android 11. In Settings-Sound and vibration-Ringtone SMS vibration and in Default notification sound.
I change both sections by putting the tone or sound that I like the most but curiously, whenever I connect the mobile to the bluetooth of my car, it changes these two tones of both sections and always puts the same .... "flyer". This tone is in the folder that belongs to the alarm sounds on the clock (CURIOUS, CURIOUS !!).
I have tried to modify everything, to change for other tones, to reset Fabirca twice, to clear cache for recovery. None of these things have worked for me.
Anyone who has (which I doubt) or has gone through a similar story with their terminal ?. Say that Android 10 did not happen to me.
I wait for answers ..... Thank you very much

Categories

Resources