someone help im a noobie - JAMin, XDA Neo, S200 General

i want to install the touchflo II ROM ive looked at every guide but i just get confused lol.... with the whole hardSPL and stuff
the way i see it is
find out if my device is G3 or G4
select the right one
then run HardSPL
Then Flash the ROM using prophet tools?
the soft reset after everything is done
Am i along the right tracks ... cheers
Darkzy

...
why does no one reply .... 45 views and nothing???

Bequause you give yourself the right answer.

ok
ok cheers

do i have to hardSPL after the rom flash... and do i have to flash using xp or can i use sevem
also hardspl should i take sim out for the process of everything cheers

Darkzy55 said:
do i have to hardSPL after the rom flash... and do i have to flash using xp or can i use sevem
also hardspl should i take sim out for the process of everything cheers
Click to expand...
Click to collapse
if you flash the nvid rom you wont have hard spl but if its any rom other than that you will still have your hard spl.you can check if you still have hard spl when you switch your phone on. Its easier to flash with xp but in the new wm6.5 roms it will have the option to choose the vista option.select the vista option because its the same with seven.i personally take the sim and memory card out.hope this helps

Related

Upgrade Instructions!

Hi,
Just wondered if anyone could please give even some brief instructions on how to go about flashing an XDA Orbit with Artemis_Touch_4.01_Full.
I have searched but there just doesn't seem to be any step by step guide. I'm running WM6 and have a Vista based pc with the above ROM downloaded, but can't figure out how to go about flashing and don't want to brick my phone.
Any help woud be greatly appreciated!
Cheers
Ok its pretty easy enough. First u gotta make your Orbit "unlocked". This is done by flashing USPL to it (which I guess stands for "Upgraded Service Provider Lock" or something like that). This will also make it CID unlocked (which I guess stands for "Country ID" or whatever). Anyway doesnt really matter what they stand for.
Once this is done, you can now flash your ROM to your Orbit because there shouldnt be any locks in the way stopping you.
....Meschle has made these steps pretty simple in all of his ROMs.
1 - connect your Orbit to your PC and make sure it connects to ActiveSync OK
2 - if the ROM is in a .rar then extract it and run "STEP 1 - activesync then uspl cid unlocking.bat"
3 - once thats done and you have followed the instructions that appear and your Orbit has been reset (or rebooted, whatever), reconnect to PC and ActiveSync again, then run "STEP 2 - activesync then flash artemis touch rom.bat"
....and there you go, once everything is finished and your Orbit is rebooted, you now have a brand new ROM on your Orbit. This will wipe your data (much like formatting your hard drive with a new operating system) so make sure to backup. And maybe try running "STEP 2 - activesync then flash artemis touch rom.bat" two or three times, sometimes it helps.
thanks fubofo for easy instruction, i have orbit with wm5 and to unlock i use this
http://forum.xda-developers.com/showthread.php?t=311403
but how i can be sure that it is CID unlocked and USPL what is this? and how to unlock it?,
i just dont want to risk my xda as if its not cid unlocked it can be
once again thanks for your help.
wasim21k said:
thanks fubofo for easy instruction, i have orbit with wm5 and to unlock i use this
http://forum.xda-developers.com/showthread.php?t=311403
but how i can be sure that it is CID unlocked and USPL what is this? and how to unlock it?,
i just dont want to risk my xda as if its not cid unlocked it can be
once again thanks for your help.
Click to expand...
Click to collapse
I think SPL means Service Provider Lock (like O2 or Orange) or something like that. USPL is basically a patched SPL that you write to your Orbit. Just follow the instructions on that post and when your Orbit restarts, just check (at the very start, in top left corner in red font) that the SPL displays 1.11. If it does then your unlocked and ready for flashing new ROMs
thanks fubofo for your instructions,
i done that and its working perfect, just one more question, what if i want to change with some other rom can i do this?
wasim21k said:
thanks fubofo for your instructions,
i done that and its working perfect, just one more question, what if i want to change with some other rom can i do this?
Click to expand...
Click to collapse
Hey, glad everything worked out OK. Yeah, now that your USPL is 1.11 you flash whatever ROMs you like whenever you like. Trust me it gets a bit hectic at times, so many new ROMs every week or so lol.
fubofo said:
Hey, glad everything worked out OK. Yeah, now that your USPL is 1.11 you flash whatever ROMs you like whenever you like. Trust me it gets a bit hectic at times, so many new ROMs every week or so lol.
Click to expand...
Click to collapse
this only thread i seen tonight that tells you so simply how you know if yuor CID unlocked the only otherone i saw you had to run NHtool that didnt work for me anyway so thanks alot that was such a useful bit of info
LOL thanks, although there are definately alot of other posts that describe flashing ROMs

Bricked Cruise? Need Help.

Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!
Bricked Cruise
hansdekker said:
Okay, so I'm an idiot. I'm completely lost now. Here's the basic facts:
Hard-SPL install was unsuccessful, but I didn't notice. So I'm still with original SPL.
I started upgrading the ROM with original SPL, which of course crashes at 3 percent.
Now I can't get back into WM. It's stuck at the 'smart mobility screen'.
So the problem is: it won't let me install any ROMs because original SPL is still on there. I can't change to hard-SPL anymore either. The ROM that's on the machine doesn't seem to work anymore. When I try to install an original ROM it says I can't use this utility. I think I need to download an official ROM + installer, but I can't find any from HTC.
Alright, so skip all the noob and idiot comments please, I already know. But where do I go from here?
Please help!
Click to expand...
Click to collapse
First you can try a hard reset!
Here you can download the original shipped rom with installer.
ftp://xda:[email protected]_radio_sign_25.65.30.04_1.58.21.23_Ship.exe
kr.,
Frepke
Update
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.
Three colour screen info
Pola100
Spl-1.25.0000
Cpld-2
hansdekker said:
Update
Okay, so I did the hard reset as described here. No luck.
So I went back to the bootloader screen (original SPL) and tried the original rom and installer from the download link. Again, no luck. It says "Error [294] Invalid Vender ID. This utility cannot be used for your PDA phone. Please check your update utility." The phone was unlocked when I bought it, it's HTC branded. Is there another installer out there?
I've also tried loading several roms by putting them on SD, renamed as POLAIMG.nbh. (including the orginal rom, extracted from the downloaded installer). For the original Rom, it will say 'loading...', then 'checking...' and then it will tell me: "00028002 - not allow". Then it goes back to the three colour spl screen.
There's also a link here on the forum which I'm not sure is good advice.
Click to expand...
Click to collapse
Hi
Ths info I posted relates to the Kaiser (kaiser [nearly] equals Polaris in terms of hardware) and the MTTY is from the ELF forum.
"set 16 0" to tell bootloader to boot the OS after reset.
"task 8" to get your device formatted
I suggest the set 16 0 and a reset to see if that helps, I do advocate you searching for these commands and checking they are applicable.
The info was from this KAISER thread
http://forum.xda-developers.com/showthread.php?p=2103884
HTH
Leon
MTTY
Thanks for your advice guys.
I tried the "set 16 0" command + reset. Still same situation.
Any other tips anyone?
Darn
No more reponses?
It is probably bricked then.
So what's my next move...trash it?
hansdekker said:
No more reponses?
It is probably bricked then.
So what's my next move...trash it?
Click to expand...
Click to collapse
try flashing using sd card
Tupac_Shakur said:
try flashing using sd card
Click to expand...
Click to collapse
I think he wrote already that he tried to flash some ROMS using SD card... (POLAIMG.NBH). Not sure though if he tried re Hard-SPL'ing using the SD flash method...
So I would suggest to retry the HardSPL using the POLAIMG.NBH method (just as if the HardSPL's .NBH file was a normal ROM) if this hasn't been tried yet...
Hey you must careffuly read mtty in kaiser thread.....mtty can brick your device for entire life.....my advice to you is pm GSLEON3
he's the master of using mtty and lot of kaiser user saved by him...
Hope this can help you
cheers
The Facts
When I try to hard-spl through the SD-card, it just says "Loading..." and that's where it stays - Even if I leave it till the battery dies. I tried the 2.10 and 1.10 versions on this page.
Are you sure? This Hard SPL suit for Hermes. You have to use this: http://forum.xda-developers.com/showthread.php?t=375338
TB
Hard-SPL through SD
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
How to flash your Polaris using the microSD card [Guide]
hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
Hi,
Try this thread :
http://forum.xda-developers.com/showthread.php?t=384084
How to flash your Polaris using the microSD card [Guide]
TB
It's starting to seem really hopeless
Thanks.
Same result. The screen just says "Loading..." and stays there.
hansdekker said:
Thanks.
Same result. The screen just says "Loading..." and stays there.
Click to expand...
Click to collapse
unplug usb and replug it
hansdekker said:
You're right; I did notice that - however
I had to take an nbh from this page. The reason is that the HTC Cruise Hard-SPL program I found on this page won't let me extract the rom.
I need the rom file to put in on SD!
The Hermes one probably wouldn't work anyway though, thats a good point Where to get the Polaris separate rom nbh? I haven't found it on the forums. Maybe I'm going blind...
Click to expand...
Click to collapse
1. You can not flash hard-spl with microSD method! (hard-spl flash use jumpspl to ignore cid-lock. But with microSD card method you will not use jumpspl, so you can not flash hard-spl! (and to use microSD method you have to have hard-spl on your pda)
2. If you unzip hard-spl on your pc will be an RUU_signed.nbh. This is the rom file, but you can not to flash it with microSD.
3. Your device is bricked, I think. Take it to repair!
after an unsuccessful flash, u shud never try to flash again, high chance of permanently bricking your pda. go contact GSLEON3, he saved my kaiser from bricking when i made the same mistake as u. helpful fellow. make sure u donate lol
Accepted Defeat
Hi
I accepted defeat and exchanged the unit.
Thanks for all the help.
H

artemis USPL - improvements

I was asked to patch USPL for ROM size checking when flashing via RUU, so this version does not check size even when flashing via USB. (original SPL skips the size checks only when SD flashing.)
I did this a few days ago, but didn't get around to posting it
download from attachment, enjoy! donations are always appreciated to the "To Cmonex" link in my signature
how to use it: if you already have a version of artemis USPL installed, simply flash this new version using RUU or from SD (ARTEIMG.NBH on FAT32 formatted SD)
in bootloader (tricolour mode) it should then say version: 1.11.cmon
for instructions on installing any USPL if you have no USPL yet - check out: http://forum.xda-developers.com/showthread.php?t=311403 until I have more time/motivation for userfriendly packaging
more plans: if I get time/motivation I might upgrade this to be full HSPL (overwrite protection)
Well done Cmonex..!
Thanks so much.
Peoples of Artemis forum wait it long times already.
Thread Sticked.
Cheers ..!
cmonex said:
.......
more plans: if I get time/motivation I might upgrade this to be full HSPL (overwrite protection)
Click to expand...
Click to collapse
Then with full HSPL, i see a lot of bricks coming to "life".
Hope u get motivated enough.
Thanks Cmonex, excelent stuff.
Thanks !
But I dont really understand. Can Flash under vista ou seven with no drivers ?
it's the same process.
The difference is that you can flash any rom without size limits.
Before you only could do this with SD Card method.
not working
its not working
it gives the same error : invalid size
canu explain step by step plzzzz
Is you bootloader showing SPL 1.11.cmon?
i have replaced the nbh file of artemis uspl with this one
then started uspl after that once it gets over i started
ruu upgrade utility
thats the way how it is done or something else
during this process no bootloader screen comes
And where is the response to my question? ....
drlalitbida said:
i have replaced the nbh file of artemis uspl with this one
then started uspl after that once it gets over i started
ruu upgrade utility
thats the way how it is done or something else
during this process no bootloader screen comes
Click to expand...
Click to collapse
you need to enter the tricolour screen to check version.
fhcoolos said:
Thanks !
But I dont really understand. Can Flash under vista ou seven with no drivers ?
Click to expand...
Click to collapse
does artemis have an issue with vista? tell me what kind of problem please
thats what i have written
no bootloader screen comes in between the upgrade process
drlalitbida said:
thats what i have written
no bootloader screen comes in between the upgrade process
Click to expand...
Click to collapse
you have to manually go to bootloader to flash the image
cmonex said:
does artemis have an issue with vista? tell me what kind of problem please
Click to expand...
Click to collapse
Usb drivers while u enter bootloader.
http://forum.xda-developers.com/showpost.php?p=1312109&postcount=118
Cheers.
I want to thank you very much for this useful work. However I couldn't try it yet Because at the end of the rom update utility application (I mean %100) it gives a error 270 udate error image file corrupted. Please check your update utility I have tried all these attempts while my phone is at the bootloader mode.
Thank you in advance
Can I just replace the RUU_USPL_signed.nbh file with the one from the "Artemis Update SPL (USPL) v.01 - Another way to flash *ANY* rom to your device" thread?
oh!thanx!it's funny!
sean777 said:
Can I just replace the RUU_USPL_signed.nbh file with the one from the "Artemis Update SPL (USPL) v.01 - Another way to flash *ANY* rom to your device" thread?
Click to expand...
Click to collapse
Yes. All other files are the same.. infact you need to because zip does not have start_uspl.exe
need urgent help........
hello everyone ....i want to upgrade my o2 orbit wm6 to wm 6.1 or any cooked rom currently i am using wm6 but the problem is my active syncro is not working is there any other to start uspl without acive syncro.....give some suggestions ...thank for ur time...
Hello!
Is there any way to load USPL from bootloader (without ActiveSync)?
Regards!

Help! my dopod is fUBAR

Hi all,
I'm a newbie here so sorry of this type of problem has previously been solved in a later thread. If so I couldnt find it.
Several months ago I returned from China to Germany with my Dopod C858 with stock windows in English, I found a link on how to upgrade the PDA to a cooked rom ( I cant quite remember which one but I worked fine and looked quite smart compared to the standard windows layout) nedless to say several days later I was not quick enough with the charger and let it run flat. After charging nothing worked anymore!! I can get boot loader (ISPL 1.09.0001 SPL 1.09.0001) and thats it. I have tried every possible way appart from gold card to reinstall a rom but always have either error 240,264,300 take your pick its different every time. I am running vista 32 (Prophet tools vista driver ). Please help with some suggestions or guidance how I can restore it..
Ps Active sync or even widows mobile device centre doesnt recognise it though if I go into Properties/Device Manager it comes up as a HTC Mobile device
Many thanks
You need to flash your original carrier ROM. Go into bootloader, hook up your phone via USB and flash it. Then you should have an updated IPL/SPL of 4.xx.xxxx, after which you can then apply HardSPL and flash another custom ROM if you like.
1. This is NOT a ROM Development thread. I moved it. Please post in the correct sectio next time.
2. It has been covered many times.
3. You flashed using USPL or HardSPL but your SPL is below 4.0 They're both incompatible with your SPL.
4. Your only fix will be a gold card. Search for it and you will find detailed instructions on how to fix it.
Moved?
Where did you move my thread to please?
It was moved here.
ivanmmj said:
It was moved here.
Click to expand...
Click to collapse
LOL, wow.

reset Hd2 to Factory status with original rom

I'm having a little problem with the super display of my BIG(marvelous)HD2..
Now after some months of playing with roms and others, i have two stains/halos near/under the battery connectors and processor..(anyone has the same ?)
I'm thinking to deliver it in Htc center
but surely not with the AxLor 10 rom flashed in...
So to reset it in Factory condition how i have to do?
I was thinking to execute Task29, and then install the 1.66 original rom
but i don't now if its all right,probably i forgot some things..
so pleeeeeeeeeeeese
can someone help me?
Thanks!!!!!
TommyRose said:
...........
I was thinking to execute Task29, and then install the 1.66 original rom
but i don't now if its all right,probably i forgot some things..
Click to expand...
Click to collapse
That's all you need to do mate!!!
Your HD2 will be in the very first condition from HTC.
Task29 will remove the rom and when you put your original rom back on, you can do it 1 of 2 ways:
- either flash it via sd card, or
- flash via pc and then run HSPL2 and change hspl back to spl 1.66.0000
The removal of hspl is key as most service centres will check for this
Billytheking said:
That's all you need to do mate!!!
Your HD2 will be in the very first condition from HTC.
Click to expand...
Click to collapse
Guys you are great!
so the proceedure is ok..?!?!? thanks Billy
i'll make it alll from pc..
TommyRose said:
Guys your are great!
so the proceedure is ok..?!?!? thanks Billy
i'll make it alll from pc..
Click to expand...
Click to collapse
Check your spl version to make sure hspl has been removed
Sorry Clyde..
how to check?
the original rom upgrade is an exe file so, i think i will be ok the spl on tasked29 memory.. i think..
probably this afternoon i'll try all..i'll let you know!
re-thanks guys
TommyRose said:
Sorry Clyde..
how to check?
the original rom upgrade is an exe file so, i think i will be ok the spl on tasked29 memory.. i think..
probably this afternoon i'll try all..i'll let you know!
re-thanks guys
Click to expand...
Click to collapse
No, running the exe file will not replace the spl version. This can only be done if you flash the rom.nbh file via the sd card.
The easiest way though is to run the exe and then use hspl2 to revert to your stock spl. To check your spl version, switch the device off and then while holding the volume down button in switch the device on. It will boot up in a multicoloured screen and will display the spl version.
i executed the task29 by ShaDrac ( with radio....)
now when i enter in boot loader: picture it's really bad.. I have:
PB81100 HK-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
i don't think it's ok.. I'm not sure..
reading CotullaHSPL, it means it was not factory default.. or not ? bhuuuu..
the rom now is 1.66..
pleeeze it's factory default now?
its only stock once the spl ends .0000
like clyde mentioned, your next step is to run hspl2 and choose an spl that ends 0000, and that will remove the 1.42.hspl and replace it with stock.
Go for 1.66.0000 since that is the rom you are running.
thanks today i'll try now i have to gooo
thaaaaaankz
NO, the 1.66 rom comes with the 1.42 SPL, flash that.
RaiderX303 said:
NO, the 1.66 rom comes with the 1.42 SPL, flash that.
Click to expand...
Click to collapse
no, it doesn't. But it doesnt matter, they will both work.
ok.. i use the hspl2 loading 1.42.0000 and reflashing the original ITA 1.66 radio-rom..
so
it's all ok now for the factory standard staatus??
want to re-have my perfect BIG displays..
can i send it so done, in assistance?
in the image you can see (+or-) the end boot loader result..
thankz again guys
then i'm thinking to keep the original rom just tweaked with cookie's super add-onS and somethings else,preventing any problems...
yea thats fine.
ok.... i have finally got my hd2 2 the point where im happy with all apps and mods ect ect... however i am lookin 4 a way 2 restore it 2 the exact original i got out of the box... i mean everything restored... reg entrys... rom... spl... ect ect as i have changed and rechanged everything so many times i think i have a few bugs.... so my plan is 2 restore everything and set it to how i have it now in 1 go so i dont ''piss it off'' in random changes... my specs are below in my signature which look pretty standard but i have done many registry tweaks and installed many applications which i have chopped and changed many times... also tried to install duttys rom many times but that kept failing and hspl would never install so that could maybe be a small factor in the few bugs i have... the main bugs are to do with random freezing here and there... battery drain... and overall performance... im aware some of this is due to the apps i have installed but i had a very simmilar setup a short while ago and this worked fine... but as im never happy with what i have i messed around a lil more and here i am... so any advice would be grately aprieciated... and if any software is required could u possibly post the links....??? many thanks in advance... luke
2|OP|
So what happened? Could you spl to factory one?
Is there a way to get the stock .img file off the sd card? or is it not on it from htc/tmobile??
Set By Set HTC HD2 rom install
I'm new to this rom, rooting, and unlocking game...I hate what I did to the phone I want to return it to it's factory settings. What's the best way to return my HTC HD2 back to the way it was when I opened the box?!?
do ao search for it bud, loads of posts about it, best way tho is writing it off the SD!
check here http://forum.xda-developers.com/showthread.php?t=577717

Categories

Resources