Hello, everyone i did a hard reset and cleared all data but the PRI still says flipz_01 and prl is 60663 how do i fix this back to stock?
Mdawg112 said:
Hello, everyone i did a hard reset and cleared all data but the PRI still says flipz_01 and prl is 60663 how do i fix this back to stock?
Click to expand...
Click to collapse
Flash Fresh 1.1 or Damage 1.0. Get into dialer and press ##786# Then press menu and select reset. Next enter your MSL. Phone will then factory reset and the PRI will be back to 1.70 and you can let it boot and update your PRL if it still isn't 60663. Lastly, you nandroid back to whatever your daily driver is.
Thank you so much =]
Related
when fresh released his 2.0d i flashed over to that the first day it was released, now everything was working fine until last night. i woke up in the middle of the night and the phone was on roaming, didnt think anything of it and went back to sleep. i awoke this morning to the phone still on roaming so i took the batter off put it back in, and nothing still roaming. i removed the battery again, and again nothing still roaming. so i went into recovery did a data wipe, then rebooted nothing still roaming, wiped again and installed 2.0d again, and again nothing. i wiped the phone one last time, and flashed over damagedtrev, and again still roaming what are my options besides doing an ruu or is that pretty much my best option.
what does it show as your PRI and PRL? and are you with sprint? Might need to update PRI and PRL...
Mine did the same thing. I had the latest PRL and a PRI of 1.70 and I after about a week of running fine I could not get out of roaming. I went back to stock rom.
prl 27392
pri version it says flipz_01 but i was at 1.70.....
and yes im with sprint
wow ok i did a prl update. and it works now that was stupid thanks!
what happens wen u disable roaming?
yeah prl with sprint should be 60663 for anyone else who runs into this
This happened to me but when I did the PRL update nothing would change so I went and hit it with the RUU and used the kitchen to reroot and it worked the next time. I seriously also broke my phone because I did EVERYTHING to not have to set it back to factory. I did so many NAND and BART backups yet nada worked. NOw im running fresh again and loving it =]
this actually happened to me last night. Couldnt get it out, tried putting in airplane mode and the just stuck. so I restarted the phone, it booted up in airplane mode, turned off airplane mode, and all was good again
Joecrack305 said:
and yes im with sprint
wow ok i did a prl update. and it works now that was stupid thanks!
Click to expand...
Click to collapse
you should update your OP to state the solution.
Can someone please tell me what to do to delete this last update. i have a stock evo but it screwed up my keyboard. It types Q continuously random times and i even types it when my finger is above the Q on the keyboard but not even touching it. Any thoughts?
Did you try a factory data reset? Settings, Privacy, Factory Data Reset. Don't know if this will remove the update, but it might at least clear up the problem for you.
i wiped it and now my keyboard is more screwed up typing things i dont even touch and freezing up any other ideas?
youre not the only one thats having problems after the update, as of current there isnt a way to downgrade. sorry
jokerpt50 said:
i wiped it and now my keyboard is more screwed up typing things i dont even touch and freezing up any other ideas?
Click to expand...
Click to collapse
hey if you did the factory data reset tell me whats the software information
Bloodsville said:
hey if you did the factory data reset tell me whats the software information
Click to expand...
Click to collapse
I factory reset, thru the privacy > factory reset data menu
firmware
2.1-update1
baseband
2.05.00.06.10
kernel
2.6.29-789bf291
[email protected]#1
build
1.47.651.1 cl195459 release-keys
software
1.47.651.1
browser
webkit 3.1
pri
1.40_003
prl
60667
have not done any other rooting or modifying flash/recovery etc other than unrevoked 1, which still does not work even after the reset.
yesterday my 4g was going in and like crazy, before the update it was pretty rock steady.
the reason I factory reset was because my 4g radio was stuck in 'starting' and would not turn on or shut off.
now my 4g is working again, albeit still going in and out.
One more question, im not to sure of this program ODIN, but i remember i did a factory reset to get my GPS working a few weeks ago. I followed this post
""Fixing the GPS no fix issue on the Samsung Epic 4g requires you to do a manufacturer's reset by obtaining the MSL code from Sprint. Once you get the MSL Code, remove the SD Card and Enter ##786# on the dialer keypad. You will see two options: View and Reset. Tap on the Reset option and you will get a prompt to enter the MSL code. At this point you will be asked if you want to do a manufacter's reset, enter yes. The phone will shut down and reset itself after a few seconds. Once the process is complete, the phone will go through a hands free activation. After the activation process, updates may be downloaded and installed. Now that all updates have been performed, you may check to see if your GPS is working by going to Google Maps. You should be able to lock in GPS signal in under 10 seconds. Thats it. Your GPS woes are over."
After i did that and got a GPS lock, i went to CWM and did a ADVANCED data restore, and i back on DK28 and had GPS lock when i went into maps. COuldnt i jsut do the same factory reset, then open up CWM, flash the DEOXED eb13, and then do a advanced data restore??
Major question would be if i did ADVANCE, would it bring me back to DK28, or would i just do a DATA restore.
I really was hoping there would be a easier way to go from Dk28 to EB13, but this way seems alittle easier then ODIN.
Flashing the DK28 rom will NOT update the modem to EB13. Use Odin or samsung updater program. Both are very easy, just follow instructions.
Well to answer my own question, it says it does a MASTER RESET, but it DOES NOT!!! I ended up resetting my phone without my data but still am on DK28 with the ROM i flashed. And to make matters worse, somehow i ended up wiping all the data off my SD Card in the process, not sure how, Good thing i copied all my info to my laptop earlier today. I am now putting everythign back aswell as the DEOXED EB13 rom which im going to try and FLAsh the zip via CWM. worse case scenario i just advance rstore back to my CW backup from today and its like i didnt do any of this. ugg
If you are trying to get back to Stock (not rooted) just use the Samsung tool for EB13.
As far as going back to DI18 2.1, you will be better off with EB13 flashed, not the update.
im trying to go back to DK18 and stay rooted, to update to EB13.
urirx98 said:
im trying to go back to DK18 and stay rooted, to update to EB13.
Click to expand...
Click to collapse
Why not just use the samsung update tool, then use CWM 2.5.5
http://forum.xda-developers.com/showthread.php?t=770388
to root it. You will get a clean install (recommended) and root.
ok, so i actually was able to FLASH the DEOXED version of FROYO EB13 ontop of my DK28 , dont ask me how, it told me it didnt work, but it did. Now i tried to CWM my data and its saying its a non match. THis is not making me happy. I heard people had probs with this, any way to fix it??
Edit, i actually accidently swapped SD cards when i was copying and pasting and when i replace it with the correct card, i had no problems doing a FULL DATA restore.
I KNOW HAVE SUPERNOVA 2.2.2 EB13 Kernal version 2.6.32.9 running Firmware GENOCIDE 0.3a EB13 OC/UV kernal
Its KICKASS!!
I would odin to stock eb13 and if you really want everything to work try ACS FROZEN rom. Ive never been so happy with my device it ALL works
I got an evo that i had flashed to boost and my son factory reset and i need to fix the evdo settings but idk what the working evdo settings for boost are for my evo does anyone have them ?
I don't understand why a factory reset would do this because those settings are in the phone itself, a factory reset wipes your ROM back to it's original state, wipes cache and all that good stuff if I'm correct.
Either way I've reset mine and never had to reenter any settings. But if you do then you would just need to get them off your donor phone and reenter them as you did when you originally cloned the phone.
Not sure on this way. Running Stable 4.2.2 Google Edition and had 0 problems until a few hours ago. Went out after dinner, tried to google a phone #, but had no data. Rebooted (just for kicks), and still nothing and no voice. Trying to make a call I get "Mobile network not available". I tested using my daughters G3 and worked perfect so I know it's not that.
So, I would like to try 1 of 2 options, open to either.
1. Revert to the stock 4.2.2 and wait till the 4.3 comes around
2. Upgrade to test a newer ROM. I am reading up on the MF9 but a little unsure, if I am running an MD9, can I simply flash a newer MF9 ROM onto what I have?
I don't want to brick this phone, so what's the best way to move forward and hopefully fix this issue.
Thanks
Wipe your phone and flash a touchwiz ROM. Update prl and profile.
Sent from my SPH-L720 using Tapatalk 4 Beta
daniel4653 said:
Wipe your phone and flash a touchwiz ROM. Update prl and profile.
Sent from my SPH-L720 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Thanks. Looking here http://forum.xda-developers.com/showthread.php?t=2303917 there are plenty, but as I said, I am still on the MDL ROM, so I would assume pick an MDL touchwiz, no?
Actually I have a blu-Kuban (touchwiz) nandroid, I restored to that backup, and had the same issue. No voice, and the PRL, etc. all failed to update. I am downloading the stock deoxed MDL, and will try a wipe/clean install of him.
Tnx again
xlancealotx said:
Thanks. Looking here http://forum.xda-developers.com/showthread.php?t=2303917 there are plenty, but as I said, I am still on the MDL ROM, so I would assume pick an MDL touchwiz, no?
Actually I have a blu-Kuban (touchwiz) nandroid, I restored to that backup, and had the same issue. No voice, and the PRL, etc. all failed to update. I am downloading the stock deoxed MDL, and will try a wipe/clean install of him.
Tnx again
Click to expand...
Click to collapse
I'm actually running Blu Kuban as well and I do not have this issue. Try turning the cell data toggle off and back on. Also, make sure you aren't in airplane mode. I have noticed that sometimes the toggle is on while the airplane symbol will not show in the status bar.
jaywaka2713 said:
I'm actually running Blu Kuban as well and I do not have this issue. Try turning the cell data toggle off and back on. Also, make sure you aren't in airplane mode. I have noticed that sometimes the toggle is on while the airplane symbol will not show in the status bar.
Click to expand...
Click to collapse
Thanks, but since I did try a restore, that would ensure airplane mode was not the case as I don't use it nor would I have 2 ROM's both doing the same thing. I did do a wipe/restore with no luck, so now going to do a wipe/flash. If still nothing, will have to resort to going to stock and taking it to a local sprint shop!
Thanks
xlancealotx said:
Thanks, but since I did try a restore, that would ensure airplane mode was not the case as I don't use it nor would I have 2 ROM's both doing the same thing. I did do a wipe/restore with no luck, so now going to do a wipe/flash. If still nothing, will have to resort to going to stock and taking it to a local sprint shop!
Thanks
Click to expand...
Click to collapse
if restore fails.. try ##786# > reset on stock rom. you need your SPC/MSL for this.
if the 786 reset fails.. let me know in about device > status if your phone number is still listed.. and what PRL is shown.
autoprime said:
if restore fails.. try ##786# > reset on stock rom. you need your SPC/MSL for this.
if the 786 reset fails.. let me know in about device > status if your phone number is still listed.. and what PRL is shown.
Click to expand...
Click to collapse
BAM. Worked like a charm. Naturally have all my spring bloatware and such, but I can at least make a call! Not sure how/why that happened, but it did re-activate fine, so looks like were back in business!
Thanks for all the read/replies!