Related
Well i have the Telus version of the HTC Touch Diamond. And sadly enough it does not have a light sensor (for some stupid reason). So i was wondering if somone could make/find a tweak that could make it so when you aare in a call the screen would not become useless but you just have to put a bit more pressure than you would normally. Because my cheek always touched the end button and it pisses me off. So you would just have to push a little harder to press the end button.
Also i dont like how you cant use ringtones as SMS/TXT sounds. Well you can but it just plays till the ringtone is over. I was wondering if there is a way that you can make it so when you recieve an SMS/TXT than you all you have to do is either tap the screen wthout anything happening from pressing it(unless you press the message tab), or to touch the center button (cause its touch sensetive) also without anything happening.
anyone??
the second one is just a sugestion
the 1st is a request please
destinddule said:
Well i have the Telus version of the HTC Touch Diamond. And sadly enough it does not have a light sensor (for some stupid reason). So i was wondering if somone could make/find a tweak that could make it so when you aare in a call the screen would not become useless but you just have to put a bit more pressure than you would normally. Because my cheek always touched the end button and it pisses me off. So you would just have to push a little harder to press the end button.
Click to expand...
Click to collapse
Use one of the cooked ROMS with the Phonelock Shade/Slider
As for the second request...could you please elaborate
pistonripper said:
As for the second request...could you please elaborate
Click to expand...
Click to collapse
Pretty sure he wants to stop the ringtone manually. As opposed to letting it play a full song of 3mins.
Dude, use the MP3 trimmer and trim an MP3 down and set that as your SMS tone. Thus no more verses and choruses, only a portion of the song.
To stop the sms ringtone, you can press the call end button, but it switch you to the home page if your doing anything on the phone.
Yes Dickenz
Thats what i want but i used the trimmer but i always use the main chorus of a song
and thats to long eveytime i get a txt
So i can just press the end button?
Hi,
I have a WM6.5 rom and when someone is calling me I get a simple popup window and two softkeys at the bottom: accept, reject. I read that when the screen is locked, there is a different incall screen, where you have to slide to answer or ignore. I do not lock my screen, so would it be possible to have the better incall screen by default?
Thanks a lot for the replies.
The app being mentioned is A_C's S2U2 and it provides a full screen pop-up for contact pictures.
I ran without a screen lock for a while until my pocket made a call and used up the £15 of just applied top-up. Now i use S2U2 and have yet to have any problems.
Thanks, will try it tomorrow
Kamill said:
Hi,
I have a WM6.5 rom and when someone is calling me I get a simple popup window and two softkeys at the bottom: accept, reject. I read that when the screen is locked, there is a different incall screen, where you have to slide to answer or ignore. I do not lock my screen, so would it be possible to have the better incall screen by default?
Thanks a lot for the replies.
Click to expand...
Click to collapse
you can also try this one, i think this is what u are really looking for http://forum.xda-developers.com/showthread.php?t=493593 the latest version is on post 20.
Thanks, but I've found an ideal solutiuon - AutoLock. Now the screen is locking on an incoming call and I get the sliders
Usually when a call comes and the phone is inside the pouch (good for protection), there are several ways of messing up by accepting or rejecting the call even b4 its completely out of the pouch as blelow:
On screen:
1) U can press the on screen message but which will send an auto sms to the caller and end the call
2) U can press the answer key
3) U can press the ignore key
Off screen (hardware)
4) U press the answer key
5) U can press the end key
Incredibly, all 5 options are simultaneously active. The screen can be locked by S2U2 etc. but I cannot find any option of locking the hardware keys.
Any help will be appreciated
Firstly thanks for Omnia i8000 support on XDA..
Now I feel secure..
Secondly even I'll lyk to disable my hardware keys for call ans/end..
is there a registry tweak or something we can do to disable it..
s2u2 has that option... go settings/phone and u have S2A Hard ans/end key...
Search 542482 - there's an app for that over in the Mobile Apps & Games forum
Solution found!!!!
The issue was really troubling me and I finally found a solution. Install a small program called Incall lock which locks the call & end key. But that will totally disable u from accepting calls under WM6.1. So install s2u2 and enable screen response and voila!! U have. Both these are available elsewhere in this lovely forum.
Note:- The whole process during inplementation is quite messy as u will first have to install .net compact & samsung SDK software (both freely available).
4 software to do a simple thing which should have been taken care of by the OS. That's life under our billy, the goat.
Hope this help. I would be glad to give something back to this site, i have greatly benefited from.
TouchLockPro works great.
(I can't post a link yet...search for it in the Omnia 2 section at Modaco).
ad720 said:
TouchLockPro works great.
(I can't post a link yet...search for it in the Omnia 2 section at Modaco).
Click to expand...
Click to collapse
I tried tpro but it did not work for me. I am using wm6.1 under samsung touchwiz. Cud it b because of that ?
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
captkkk said:
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
Click to expand...
Click to collapse
See, even if no software was there u wud have to press a key or tap something to answer anyway. With S2U2 and incall lock, the only point of access is the slider (in my case) with which i can either accept or reject calls. So if i swipe to ans, the lock opens and i can straight away start talking. So there really is no extra step involved. Whereas, if I do not lock the key, I will have to be careful not to press the keys accidentally which is difficult as I often put it in my pocket and more so inside the pouch. I think the swipe to answer is the killer option.
bimboybimboy said:
See, even if no software was there u wud have to press a key or tap something to answer anyway. With S2U2 and incall lock, the only point of access is the slider (in my case) with which i can either accept or reject calls. So if i swipe to ans, the lock opens and i can straight away start talking. So there really is no extra step involved. Whereas, if I do not lock the key, I will have to be careful not to press the keys accidentally which is difficult as I often put it in my pocket and more so inside the pouch. I think the swipe to answer is the killer option.
Click to expand...
Click to collapse
Slide to Answer is great option to traditional Click to Answer, that is very true, however, that option has been adopted in 6.5 and some 3rd parties phone app as well, so if in i8000 case, the phone interface can be omitted and use the 6.5 or simply use those better and more feature phone apps
captkkk said:
Slide to Answer is great option to traditional Click to Answer, that is very true, however, that option has been adopted in 6.5 and some 3rd parties phone app as well, so if in i8000 case, the phone interface can be omitted and use the 6.5 or simply use those better and more feature phone apps
Click to expand...
Click to collapse
Well, as I said I hv 6.1 & 6.5 not yet available in my country. so...
Hi,
I installed Throttle Lock.. Nice lock... it has slide to answer..
secondly it does not interfere with the touch player, lyk s2u2 does..
Are you using Omnia II with WM6.1 ?
Because throttle lock is not saving the settings on my phone. And yes, I am clicking the "ok" button at the top right and getting a message "changes saved". And my slide to answer is ON but no slide is displayed. All I can see is the default lock screen which opens when I click on a button on screen but that certainly does not solve my problem. Using ver .07 (latest).
I have even registered myself. Hell, the config.xml file shows Calllock is on but its not even locking when the call comes. That should be the very basic default function. Sorry, back to s2u2.
I am using WinMo 6.1 original Rom...
I installed it on Storage memory.. and its workign fine.. It does interfere with the Samsund dialer when the call comes in... but I will try disabling the samsung dialer and check... back to your issue.. Try re-installing it.. and it should work.. iam able to save all my settings..
And when the call comes in My hardware keys are lock as well and I get option to Slide to Answer or reject..
Aafi-rocks said:
I am using WinMo 6.1 original Rom...
I installed it on Storage memory.. and its workign fine.. It does interfere with the Samsund dialer when the call comes in... but I will try disabling the samsung dialer and check... back to your issue.. Try re-installing it.. and it should work.. iam able to save all my settings..
And when the call comes in My hardware keys are lock as well and I get option to Slide to Answer or reject..
Click to expand...
Click to collapse
Thanks. I unistalled S2u2 and installed again. Still no. Yet the program was working when I clicked on it. So, luckily having some working knowledge of windows, I found that the program is not putting a link in the start menu or start up folder. This I had to do manually. But thats unclean.
And what happens when a call comes is funny. There is a brief fight between the throttle default , the windows splash & the lock screen itself. Luckily, the lock screen is winning every time. But again unclean or is it the links I have placed.
Currenly, I have links to both thottlelock & throttlelockdemon in the startup & lockdemon in the start menu. How is it with u?
Also in the setting under samsung default setup, the options like lock mode & incoming are white on white. What are your current settings ?
Think this program was designed for HTC. But is definitly smaller and though not neat...working. Thanks
I have mapped it to a hardware key, so when I want to lock I press the hardware key..
Aafi-rocks said:
I have mapped it to a hardware key, so when I want to lock I press the hardware key..
Click to expand...
Click to collapse
Use incall lock for locking the keys when call comes. Works perfectly.
Tried the throttlelock for 2 days. Sometimes, the default wm screen was coming up and the look is messy. So more experiements......but till date s2u2+incall lock looks the cleanest. Will keep looking...
captkkk said:
TouchLockPro is the answer, however, if both touch screen and the keys are locked on all in-coming calls, how the hell do you answer the phone? First to unlock it then answer it? A bit troublesome.
Click to expand...
Click to collapse
I'm using TouchLockPro. It's much faster and less memory consuming than S2U2 and it has multiple ways to unlock your phone!
In the newest version, you can unlock your phone by using the proximity sensor (and our Omnia II has one )
So if your phone wakes up in your pocket our pouch, it won't unlock, but if it wakes up in your hand or on your desk, it will unlock immediately!
Consequently, if you have an incoming call and the phone is in your pocket: It will remain locked until it's out of your pocket so you don't have to manually unlock before answering
I love it!
maardiweb said:
I'm using TouchLockPro. It's much faster and less memory consuming than S2U2 and it has multiple ways to unlock your phone!
In the newest version, you can unlock your phone by using the proximity sensor (and our Omnia II has one )
So if your phone wakes up in your pocket our pouch, it won't unlock, but if it wakes up in your hand or on your desk, it will unlock immediately!
Consequently, if you have an incoming call and the phone is in your pocket: It will remain locked until it's out of your pocket so you don't have to manually unlock before answering
I love it!
Click to expand...
Click to collapse
I hv omnia 2 with wm6.1. Tried touchlockpro and was absolutely useless. How is it possible ?
Can u plz put in the download link.. Iam sure its somewhere on XDA itself, but I am kinda lazy to search today.... I'll download it once I reach home..
Im running MattC Leo Sense which uses a slide/lock for both the phone lock and to answer phone calls. I was able to change the phone lock slider from up/down to left/right but I want to do the same with answering phone calls.
What happens with incomming calls is someone calls me and I pull my phone straight up and out of my pocket. When I do this, the phone rejects the call because the phone rubs against my inside pocket and slids the answer/slide to reject phone call. If I could change the answer/slide from up/down to left/right then this wouldnt happen.
Does anyone have this issue and/or know of a fix?
Thanks
saabguy123 said:
Im running MattC Leo Sense which uses a slide/lock for both the phone lock and to answer phone calls. I was able to change the phone lock slider from up/down to left/right but I want to do the same with answering phone calls.
What happens with incomming calls is someone calls me and I pull my phone straight up and out of my pocket. When I do this, the phone rejects the call because the phone rubs against my inside pocket and slids the answer/slide to reject phone call. If I could change the answer/slide from up/down to left/right then this wouldnt happen.
Does anyone have this issue and/or know of a fix?
Thanks
Click to expand...
Click to collapse
you can just set a screen lock on it and it doesnt show up until u unlock the screen lol.. thats wat i have or else it answers or ignores people in my pocket.. so with the connect the dot screen lock it just rings and shows u who it is until u unlock the screen...
Can you please tell me how you changed the unlocker from up/down to left/right. I would really appreciate.
Sent from my HD2
same problem here, i've tryed the lockscreen tactic. but i find that very annoying. I have no program skills but there must be some guy who can make a small apk that deletes the slider and replaces it with nothing =) so i can just use the hard buttons on my HD2...
Just to bring the issue up again im still having massive problems with calls being ignored or answered (depends on which way the phone is in my pocket)
Anyway have any idea, ive tried widget locker but that only seems to apply to lock screen and not phone call screen.
This issue had anoyed me for a while as well. I have tried widget locker and that works great for the phone lock, but as mentioned earlier in this thread - not for the incoming call locker.
If someone fixes this for the sense based ROMs, they will be my hero!
cyanogen mod ROM includes the "slide to answer" from lockscreen window similar to "widget locker" app. i just wish they would include the option to add widgets and shortcuts to the lockscreen like widgetlocker does
saabguy123 said:
Im running MattC Leo Sense which uses a slide/lock for both the phone lock and to answer phone calls. I was able to change the phone lock slider from up/down to left/right but I want to do the same with answering phone calls.
What happens with incomming calls is someone calls me and I pull my phone straight up and out of my pocket. When I do this, the phone rejects the call because the phone rubs against my inside pocket and slids the answer/slide to reject phone call. If I could change the answer/slide from up/down to left/right then this wouldnt happen.
Does anyone have this issue and/or know of a fix?
Thanks
Click to expand...
Click to collapse
I have the exact same problem, and looking for a fix.
same problem here
people hung up on me because phone answered in my pocket and they would hear noise while I'm removing it from my pocket/case >.>
setting a lock screen is so annoying, now I remove my phone carefully so I don't answer by mistake.
[edit] I've searched around the net, and downloaded a few new lock screens. there's one called "simply lock screen" it has an option to disable the slide to answer, and it will be replaced by the normal answer buttons you get when the device is not sleeping. it might work, but there's still chance that the answer/dismiss buttons will be pressed when you remove the device from the pocket
same problem here... no one has a clue yet?
the problem is htc sense...to avoid this problem i have switched to stock android builds...
There are a couple of apps out there that can help, the best I have found is Easy Answer Button. It is a bit tempermental, but if you install it as your last app after a fresh flash, it tends to work better - at least imho.
Others are Advanced Telephone (also free) and EZAnswer which will cost you a couple of bucks. (The link is to the 2 day trial).
+1 looking for left-right slide answer-reeject call, END call...
danielson84 said:
+1 looking for left-right slide answer-reeject call, END call...
Click to expand...
Click to collapse
Why don't you just delete htclockscreen.apk from system/app.
It will change sense up and down answer to left, right standard android lockscreen.
Use root explorer or the like and reboot afterwards to see changes.
Sent from my HTC HD2 using Tapatalk
Hey guys, I'm running a Sense build (Phiremod's Ace build) and having a problem with the HTC dialer's answer/reject call slider. (note that this is a problem with any of the Sense builds - not picking on Phiremod's.)
I pocket carry my HD2 and since the Sense answer/reject is an up and down slider, i always wind up answering or hanging up the phone when I pull it out of my pocket.
Does anyone have any ideas to change the incoming call behavior? I know I can remove the HTC lock screen, but the answer/reject slider is apparently part of the dialer (which I love otherwise). I used S2U2 on WinMo, and have been digging around for an Android alternative. Is there any way to get the stock Android answer/reject slider (left to right) on Sense without losing the HTC dialer?
Thanks,
Ryan
+1. Have the same problem
+1, the sense lockscreen makes no sense. Unlocking in pocket, answering can be done just by looking at it from wrong angle...HTC must come up with something quick. Can't even call that a lockscreen
Sent from my HTC HD2 using XDA App
+1
happened a lot of time to me... I'm happy to know that I'm not alone...
Im not sure why HTC made the slide up and down like that it really doesn't make any sense. On the WimMo sense it slides side to side.
Count me in Big relief to see others with the same "challange". In my case it often answers call without me knowing it when its in my pocket.
+1
This is the only reason I avoid Sense. Phone upside down with the screen facing my leg is the only position that works (ie makes it easy to check the screen by pulling it out of my pocket). Unfortunately, that also declines every call I try to answer.
+1 !!! anyone?!?!
solution found!
OK i hope you guys see this - i found a solution -
just install this .apk, it presents a screen with two simple buttons (answer\decline) instead of having to slide. works like a charm no more leg\but answering declining calls
I had this problem also. Just go to system/app and you'll see htclockscreen.apk and htclockscreen.odex. You can rename or delete them but I just moved them to a folder within system/app so they're not loaded. Once done, reboot and you'll get the stock lock screen.
hey tnx mr_dilly, i actually know that, but even after going back to the stock froyo lockscreen, when getting a call you still get the htc answer\decline slide screen which is, as mentioned, crap..
omricn said:
OK i hope you guys see this - i found a solution -
just install this .apk, it presents a screen with two simple buttons (answer\decline) instead of having to slide. works like a charm no more leg\but answering declining calls
Click to expand...
Click to collapse
You wanna printscreen that app?
Sent from my HTC Desire using XDA App
omricn said:
hey tnx mr_dilly, i actually know that, but even after going back to the stock froyo lockscreen, when getting a call you still get the htc answer\decline slide screen which is, as mentioned, crap..
Click to expand...
Click to collapse
Sorry, omricn. Overlooked that bit. I thought the slide to answer went away because I got the answer/reject buttons but apparently it changes once the phone is actually locked.
I use a android build without sense. Is there any app to unlock power button?
I often get a call while my phone is in my pocket and then accidently press my power button, so the call will be rejected.
Bib_x said:
I use a android build without sense. Is there any app to unlock power button?
I often get a call while my phone is in my pocket and then accidently press my power button, so the call will be rejected.
Click to expand...
Click to collapse
are you sure the power button is the issue? how does your incoming call screen look like? it could be the same issue that i had, the slider responded to the insides of my pocket, i dont believe the power button is being pressed unless you're wearing very very tight pants
I don´t have a sense build.
I get no slider, only the answering buttons on my screen. But hardware buttons are working too. When i put my phone from my pocket i often touch my hardware power button and then the incoming call is ended.
I use proximity screenoff, so screen is blank and i can´t touch any button on my display. If i press power button, the incoming call is rejected.
I want to have a slider on my display and hardware buttons should be locked complete. Only answering a call with something on my display, but not with hardware button.
understood.. i'll be sure to let you know if i find a solution
Hi All!
The biggest problem with Sense in my opinion is the slide for unlock/answer screen. The engineer that came up with that design should get a serious *****-slap. Replacing the lock screen is fairly simple though, e.g by WidgetLocker. Replacing the slide (up/down) to answer is not that simple because it's part of the dialer, not the lock screen.
So if you like HTC sense and the sense dialer, I think you have to stick with the slide up/down for answer. I'm sure that some clever dev eventually will iron out the problem, but currently I see no solution.
Agree with every word..