Yesterday my SD card decided to "damage" itself. So the phone prompted me to format it. So I did. It will write from the phone for beautiful widgets and the like but when I try and load up some wallpapers from my computer it "damages" itself again when ejecting. Im assuming I just need a new mem card and it has nothing to do with the ROM I am running (Fresh2.0d) Also I am not running apps2sd.
Sounds like a bad card to me. Hopefully it was not a 16gb class 6 Micro SD card, those suckers are expensive!
It wasn't thank god. Just a class 2 8 gig.
Sent from my HERO200 using the XDA mobile application powered by Tapatalk
put your card in your phone and go into recovery mode
1) create ext on the sd card
2) format from recovery mode
then it should fix the problem, this happend to me and what I just wrote fixed it for me. Windows would not even recognize it.
Related
Other people have probably already discovered this but I thought I would share this information.
I was using an SD build of Android on my HD2 and had problems with it losing files during USB connection. I switched to a NAND build with data on SD card.
The corruptions on my SD card caused system errors, force closes and mismatching system UI numbers.
This got sooooo bad that I had resigned myself to buying a new (and bigger) SD card.
However, whilst browsing the ext4 partition threads I read about the Panasonic SD Formatter V2.0
Apparently formatting an SD card using windows isn't good enough for SD card standards. The Panasonic app sorts that.
So I copied all my files off, formatted the SD card (takes about 10 mins) with complete erase on the Panasonic app, copied them back and re-flashed my Android build.
I have now been using the card without error for over a week and am blissfully happy with Android on NAND.
Damn, I love this forum!
(Might still buy the bigger card though! )
Cheers,
GG
http://panasonic.jp/support/global/cs/sd/download/index.html
GodsGift said:
Other people have probably already discovered this but I thought I would share this information.
I was using an SD build of Android on my HD2 and had problems with it losing files during USB connection. I switched to a NAND build with data on SD card.
The corruptions on my SD card caused system errors, force closes and mismatching system UI numbers.
This got sooooo bad that I had resigned myself to buying a new (and bigger) SD card.
However, whilst browsing the ext4 partition threads I read about the Panasonic SD Formatter V2.0
Apparently formatting an SD card using windows isn't good enough for SD card standards. The Panasonic app sorts that.
So I copied all my files off, formatted the SD card (takes about 10 mins) with complete erase on the Panasonic app, copied them back and re-flashed my Android build.
I have now been using the card without error for over a week and am blissfully happy with Android on NAND.
Damn, I love this forum!
(Might still buy the bigger card though! )
Cheers,
Click to expand...
Click to collapse
I had exactly the same problem, it began with corrupted files, constant errors, FC and restarts. At the end it was so bad that neither device nor PC could not read the card. Panasonic SD formater the only thing helped. However from the 2nd attempt, quick format didn't work long I.e. problems came back in few days. After full format everything seems to work OK. It's been OK for 2 weeks now
BTW card is Sandisk 8gb class 2
Sent from my HTC HD2 using XDA App
excuse my ignorance
but...how exactly do you use the panasonic reformatter? I downloaded it to my computer but after that i am lost. I tried to reformat sd card through usb connection but does not work i am at a lost now. Again please excuse my ignorance and be kind.
Put the sd card in a larger adapter card and put it in a laptop or external cardreader
Sent from my HTC HD2 using XDA App
Ive been able to put my sd card into a camera and format when I have had trouble like that and it worked.
For some reason, I've put clockworkmod on my device and always use it to flash.
I have a 16gb Sandisk memory card, which at first worked fine with it.
All of a sudden, a Gingerbread ROM claimed the card to be corrupt?! So, I used Gingerbread to format.
Tried to do an update, and now the card isn't recognised by the A2SD setting of MAGDLR 1.1. I have to use a 4gb to flash now.
I tried formatting the 16gb card in windows (fat 32, 32k sizes), reapply the cwkmd files to the card, but still, MAGDLR won't load it.
Any ideas :-/
jonboyuk said:
For some reason, I've put clockworkmod on my device and always use it to flash.
I have a 16gb Sandisk memory card, which at first worked fine with it.
All of a sudden, a Gingerbread ROM claimed the card to be corrupt?! So, I used Gingerbread to format.
Tried to do an update, and now the card isn't recognised by the A2SD setting of MAGDLR 1.1. I have to use a 4gb to flash now.
I tried formatting the 16gb card in windows (fat 32, 32k sizes), reapply the cwkmd files to the card, but still, MAGDLR won't load it.
Any ideas :-/
Click to expand...
Click to collapse
Did you do a quick format or a full format? If Quick, plz do a full, and try again.
Also, don't use the right-click format method. Go into disk management and do it there. Not promising anything - it's just better.
I found a bug in MAGLDR in my case. It would try and load CWM by K:\Recov\zImage then would write S and boot back to MAGLDR main menu. So here's what I did:
- Boot MAGLDR
- Click Load AD SD (Fails)
- Remove SD card while booted
- Click Load AD SD (fails again obviously)
- Put SD back in
- Click Load AD SD (Works)
Try that. Seems like an MAGLDR bug to be honest, because after setting the SD path, you can't edit it again... Even after flashing MAGLDR back to the phone (I've tried). I guess flashing stock WinMo then flashing back MAGLDR could fix the issue, but I haven't bothered.
I seldom have problems with MicroSD Cards, then again, I usually tend to buy Class 2 MicroSD cards that perform higher than Class 2 in terms of sequential writes. So, my MicroSD card writes at 7.x MB/s although it is a Class 2.
Anyways, try using a WIPE application, something that ZEROES out the whole card. Like the SD Formatter 3.0 (Beta) for SD/SDHC/SDXC. For me, I prefer to use [email protected] Disk.
Once the card is ZEROED out, just use your GParted to Partition it, if you need to. If not, just do a full format in Windows.
Ultimate Boot CD is an ISO which has a USB Script. So you just extract the ISO, then run the CD2USB script to make a bootable USB Flash Drive with a lot of useful tools.
LiFE1688 said:
Anyways, try using a WIPE application, something that ZEROES out the whole card. Like the SD Formatter 3.0 (Beta) for SD/SDHC/SDXC. For me, I prefer to use [email protected] Disk.
Click to expand...
Click to collapse
I had the same issue - 8GB MicroSD. Tried manual formatting, re-setting the card TNA. [email protected] Disk did not work either, but SD Formatter 3.0 worked perfectly!
Thanks a lot for this tip!
There are a few steps you can try to get your card working again.
1 - Full format, I know it has been mentioned but it is surprising how much a full format can help
2 - Try a non Microsoft tool like 'Panasonic SD Formatter', google it. I wipes out any partitions as well.
3 - 'Partition Wizard' for Windows. This is a great alternative to Gparted but for Windows and free.
4 - If all these fail, then it dont hurt to try Gparted, I dont see it will help but you never know.
All of those failing and it is a new card, get a refund.
I recently bought a 16GB from Ebay and they sent refund without even asking for the card back so I know you can get some dodgy Micro SD Cards.
Good luck
Yep - the Panasonic SD formatter fixed it using a Full 0's write! Many thanks to all.
update your magldr to 1.12 and try it it worked for me using 16gb class 2
YOU MIGHT want to RESET your device in NAND
that could also help when troubles arrive
nokn956120 said:
There are a few steps you can try to get your card working again.
1 - Full format, I know it has been mentioned but it is surprising how much a full format can help
2 - Try a non Microsoft tool like 'Panasonic SD Formatter', google it. I wipes out any partitions as well.
3 - 'Partition Wizard' for Windows. This is a great alternative to Gparted but for Windows and free.
4 - If all these fail, then it dont hurt to try Gparted, I dont see it will help but you never know.
All of those failing and it is a new card, get a refund.
I recently bought a 16GB from Ebay and they sent refund without even asking for the card back so I know you can get some dodgy Micro SD Cards.
Good luck
Click to expand...
Click to collapse
I had a problem getting CWM to load also. It finally worked once I deleted the volume name and reformatted.
Good morning,
I recently tried to upgrade to a kingston class 4 32gb card in my evo running cm7. I have tried everything to make it work. Under storage settings, it will read the card on boot up and I can see the files in file manager. If I try to input and remount it says unsupported file system. Sometimes in the camera it says failed to access sd card. Can anyone help?
Sent from my PC36100 using Tapatalk
did you format the card with your phone or pc(sometimes when you do it with pc you accidentally do a quickformat, which most of the times gives problems(format fat32))
I gave reformatted in the computer and in the phone and nothing works. I can add files on the computer but after some time in the phone I can't do anything related to the sd card.i also ram as chkdsk
Sent from my PC36100 using Tapatalk
hi,its my 2nd day having a hd2.
I think my card isnt comaptible to wp7
its a Rdata class 6 16gb card.
I bought a used t-mobile hd2 running on stock wm6.5
and decided to dual boot on wp7 and android
the thing is when I installed LEO70 ROM everything went well.
no reboots or anything like that showing incopability of the sd card.
BUT, apparently when I was going to prepare the sd card for partitioning as I read on guide I followed.
my card reader wont pick up my 16gb rdata class 6 card. OUCH!
even my old nokia phone rejects it and says its unformatted blah blah blah.
plugged it in again on the hd2 then went to zune and zune says 0 free space.
plugged the sd card again on a card reader and still no go.
tried another card reader and still it wont pick it up.
then tried another card reader.
this time it reads but for minutes and minutes for scanning.
no drive letter.nothing.
tried a 8gb card and ALL the reader picks up.
opened sdcard formatter and it wont pick up my sd card.
MAGDLR 1.13 wont recognize it too. all I head is the sound of a hardware being connected to the pc and that's it
please someone help me here.
I will be so glad if you could help me with this problem
I wont go back to wp7 again after I resolve this.the sd was working
how DO I revive the sd card for other use?if I canr use it for wp7
I dont wanna waste another card trying though.
note: Im currently downloading a stock t-mobile MR 3.14.531.1.exe
is this safe?and if I successfully install this will winmo 6.5 be able to format my sd? please I dont have extra money to buy another card cause all of my sd cards are being used by other phone.
thanks in advance
Get yourself a copy of SDFormatter. Put the card into your PC and run this free utility. You should then be able to do a complete format through Windows.
Your sd card is not compatiable. There are many threads in xda about this and how to format, copy partitions etc. THis thread is also useful giving you links for partition/format utility http://www.techienote.com/tag/technology
Format your card and use it for something else. Have a read of the threads in the wp7 hd2 forums, there are a few threads about which cards reported that work, I use a transcend 8gb class 6, works well.
ok thanks will try reading more
and by the way I have sd formatter but it really wont pick up my sd haha
ok thanks will try reading more
and by the way I have sd formatter and easeus but it really wont pick up my sd haha
what a shame.
another wasted money
Was reading earlier somewhere on here and they were talking about a low level formatter. Then format it using regular tools. What ever that is not sure but apparently it fixes some of these problems.
Sent from my hd2 using XDA Windows Phone 7 App
hello. yesterday i had issues with my 3 years old 2gb micro sd card. it didn't mount, i got the message "it had beeb removed" , and blank sd card. i thoght it was time for an update. i bout an 8 gb micro sd card but it doesn't seem to work either. it says damaged/blank sd card and sometimes it only works when i choose to format it. i tries formating with pc and didn't work. i also tried formating data, cache and dalvik cache but that doesn't work. i want to install the 2.3 official update but since sd card is not working i can't. so i'm stuck. is there any way i can flash 2.3 withoud ex sd card? i tried using other cards, but they don't work too. if i get it to work , when i reboot the phone the same message comes up
Cybergiannis said:
hello. yesterday i had issues with my 3 years old 2gb micro sd card. it didn't mount, i got the message "it had beeb removed" , and blank sd card. i thoght it was time for an update. i bout an 8 gb micro sd card but it doesn't seem to work either. it says damaged/blank sd card and sometimes it only works when i choose to format it. i tries formating with pc and didn't work. i also tried formating data, cache and dalvik cache but that doesn't work. i want to install the 2.3 official update but since sd card is not working i can't. so i'm stuck. is there any way i can flash 2.3 withoud ex sd card? i tried using other cards, but they don't work too. if i get it to work , when i reboot the phone the same message comes up
Click to expand...
Click to collapse
What ROM are you using?
By the way, android needs to format a new sdcard so it can be used to store data on.
rqmok said:
What ROM are you using?
By the way, android needs to format a new sdcard so it can be used to store data on.
Click to expand...
Click to collapse
aurora ics. i want to get back to stock 2.3.5 cause can't stand the battery drain any more but i can't as bootloader doesn't recognize the sd card
So your sdcard is pretty much completely dead? Can your computer recognize your SD card? If your pc can recognize it but your phone can not then you should send your phone to service. Also try reformatting the SD card and installing Aurora ICS by doing a clean install through your internal SD card.
EDIT: You can install zips from internal SD card using TWRP v2.5.0.0 by forumber2.
Sent from my Dragon-U8800Pro using xda-developers app
SvTeam said:
So your sdcard is pretty much completely dead? Can your computer recognize your SD card? If your pc can recognize it but your phone can not then you should send your phone to service. Also try reformatting the SD card and installing Aurora ICS by doing a clean install through your internal SD card.
EDIT: You can install zips from internal SD card using TWRP v2.5.0.0 by forumber2.
Sent from my Dragon-U8800Pro using xda-developers app
Click to expand...
Click to collapse
Hey. Thanks for your reply. Yes computer recognizes the card just fine. I tried formating the card but don't work. There are times when card is being recognized but not for too long. And that happens to recovery mode.Can u give me steps or link to flash rom via internal sd?
Sent from my U8800 using xda app-developers app
Ask someone on the u8800 forum. I have a u8800pro sorry. I'm assuming that you have to move the zip into your internal memory, then install twrp 2.5.0.0 and choose install zip from internal memory.
Sent from my Dragon-U8800Pro using xda-developers app
SvTeam said:
Ask someone on the u8800 forum. I have a u8800pro sorry. I'm assuming that you have to move the zip into your internal memory, then install twrp 2.5.0.0 and choose install zip from internal memory.
Sent from my Dragon-U8800Pro using xda-developers app
Click to expand...
Click to collapse
yeah, the thing is that i cannot use my internal memory. when i try to download the rom from my phone it asks for sd and when i try to move rom from sd to internal sd it says error. i also tried to make my internal sd card "external sd card" but when i try to safe the system/etc file it says it can't be saved
Why don't you download the ROM to your computer and move it to your internal SD card with a USB cable?
Sent from my Dragon-U8800Pro using xda-developers app
I realised it is my new sd card. Its micro sd too but a little different in shape. So I just used a tape to get it well attached to the port. Now everything works good
Sent from my U8800 using xda app-developers app
That same times hapend to me on tmc cm7.2 and now in the new version i can fix that on x5settings apk because dont apear that option. Now with aurora 5 u20 i didt have any problem...
Cybergiannis said:
hello. yesterday i had issues with my 3 years old 2gb micro sd card. it didn't mount, i got the message "it had beeb removed" , and blank sd card. i thoght it was time for an update. i bout an 8 gb micro sd card but it doesn't seem to work either. it says damaged/blank sd card and sometimes it only works when i choose to format it. i tries formating with pc and didn't work. i also tried formating data, cache and dalvik cache but that doesn't work. i want to install the 2.3 official update but since sd card is not working i can't. so i'm stuck. is there any way i can flash 2.3 withoud ex sd card? i tried using other cards, but they don't work too. if i get it to work , when i reboot the phone the same message comes up
Click to expand...
Click to collapse
search in market for (Mount SD)
there apk name multi mount sd card
may be useful
Hello.
Have same problem Froyo 2.2.2, micro-sd to phone and nothing. Show SD card space Unvailable. Done all what found in internet, formated to FAT32, factory reset, hard reset. All internal sd files still on phone, is this normal or factory reset don´t work normal? Phone works but wanna root it and install custom rom. Phone touch screen was cracked around 2 years ago, untill today it was on box and unused. Ordered new touch screen and had plan to make it working phone again but now problems. Don´t remember, is it rooted or not but recovery are not installed. Also have wifi problems but thats other topic talk.
Installed stock 2.3.5 but no changes.