These may be newbie questions, but does anyone know if the unlocked phone is compatible with Cincinnati Bell's 3G network?
If I choose to unlock via tmobile....I'm guessing I can go back to tmobile and mainain an account there?
Thanks!
3G
Well Cincinnati Bell uses the 2100 band for its 3G along with AT&Ts bands. T-mobile uses 1700/2100, but I believe the majority of its 3G is handled on the 1700 band. You could use it in G/E data modes. T-mobiles 3G is spotty up where I live. Check out this link for a thread on this.
http://www.howardforums.com/showthread.php?t=1447793&page=3
I hope this helps.
fhaines
Thanks for the info. Requested the unlock code from Tmob. Once that comes in I'll be able to test on cinbell and see how it goes.
jlimoco said:
Thanks for the info. Requested the unlock code from Tmob. Once that comes in I'll be able to test on cinbell and see how it goes.
Click to expand...
Click to collapse
ok...unlock complete! I can call out on the cinbell sim card, but I cannot get any data.
Under data I only have tmobile options.
Does anyone have any ideas?
yo
have you figured it out yet? I have the settings you need if your still on the lookout
i need the settings. can someone help me? I'm a noob...
Go to a CinBell Wireless Store
If you go to a Cincinnati Bell Wireless store, they should be able to provide the data connection settings. They have been advertising that the Nexus is compatible with their bands and I know they are partnered with T-Mobile for 3G.
If the clerks are clueless, you should be able to check the access points on a demo phone.
i've tried the nexus one settings from the cincinnati bell wireless page, but with no luck. i've seen on howard forums that it may be wap.gocbw.com and that doesn't work either.
got data working!
settings for HD2 data:
settings -> connections -> connections -> add a new modem connection
Enter a name for the connection: CBW Internet
Select a modem: Cellular Line (GPRS)
next
Access point name: wap.gocbw.com
next
(the following fields are left blank)
username:
password:
domain:
finish
proxy settings tab -> check this network connects to the internet -> check this network uses a proxy server to connect to the internet -> advanced
http proxy: 216.68.79.202:80
ok
ok
ok
ok
x
thats it. may need to reboot phone when this is done. i'll be working on mms next.
Related
I have t-mobile service and just bought a pocket pc phone that was supposed to be t-mobile but was an [email protected] ppcphone. The phone is unlocked and I put my SIM card in and the phone works fine. My question, is there a way to get online to the t-mobile unlimited service with this [email protected] phone or do I have to get another phone from t-mobile. I've tried entering t-mobiles access point info but it doesn't work. Can anyone help on this.
tdoman :x
hi
i have the same problem, my htc was and o2 xda, had it unlock ed and my tmobile wap settings wont work.
Yes, it should work with no problems... Key information points:
Modem: Cellular Line (GPRS)
Access point name: internet2.voicestream.com
Username, Password and Domain are blank
Also, under proxy settings:
Check "This network connects to the Internet"
Clear "This network uses a proxy server to connect to the Internet"
Clear "Proxy Server:"
Note that these settings have only been tested by me in the US.
Robert H.
still having problems
it just keeps taking me back to the user name and password page. what should I do?
tdoman
Do you have the Internet access from T-Mobile? This is a different access type from what you would have had with a regular phone. I believe it is reffered to as T-Mobile Unlimited access (Shows up on my bill as T-Mobile Unlmtd)
If you don't have this plan on your account it will prompt you for username and password. That is the only situation that I know of which will generate the problem you are reporting.
Robert H.
true! i had the same problem with tmobile at first.
it turned out they signed me up for Tzones and not the unlimited internet.
it works fine now , with those settings in the post above.
it dont matter what ppc you have... i rewrote my ppc with many systems, tmobile, att, o2, asian... then back to tmobile.
money
how much is this unlimited service and is it avalible in the uk?
I have searched around but can't seem to find this info, does anyone have it? and does everything work (except the 3g of course)?
Sorry to resurrect a dead thread but I thought it would be better than making a new one. Well then let's get to my story
I've recently moved here to the Philippines for school(actually I moved yesterday) and I brought my G1 with me which I got unlocked from T-Mobile. I have a Globe SIM card now but it seems like the 3G antennae won't work and the icon won't even show up. It's like as if my APN was disabled by APNdroid but it's not and I can turn it on and off with APNdroid but still no 3G/EDGE icon. I'm running cyanogen 4.2.15.1 and using that upgraded radio found on this forum if that helps any. Could someone help me connect to the internet here in the Philippines with a Globe SIM card on a G1? BTW I'm in Dumaguete.
>internet here in the Philippines with a Globe SIM card on a G1?
>
Hello,
I was just using it for the first time here.
Here is what I did:
Menu -> Settings -> Wireless controls -> Mobile networks -> Uncheck .. only 2G .. -> Access Point Names -> Menu -> New APN
Name: Globe inet
APN: http.globe.com.ph
User name: none
Password: none
Click Back button
Now, in order to disable this so any service on the phone will not connect without knowledge, I created a dummy APN with
Name: none
APN: none
Select the dummy when you are done with your internet usage.
As for Smart, I think you need:
APN: internet
Username: leave blank
Password: leave blank
or else try with none / none
You can also check a friends Nokia (and probably others) phone settings for APN settings and duplicate them.
Does philippines have a 3G network? I can't seem to get any...
Yes, there is 3G most places, and 3.5G in and around most cities.
Both Smart and Globe have good coverage, but Sun is mostly Manila / Luzon based regarding 3G and 3.5G.
Sun has awesome 3G / 3.5G unlimited internet. Both in speed and price.
If my DSL fails or I am not at home, I use Globe. Only if that is too slow, I try Smart.
It all depends on the carriers coverage in our area, of course.
For my android lg p500 optimus one with globe tatoo prepaid works perfect
Name: myglobe internet
Apn: http.globe.com.ph
Authentification: pap or chap
All other fields blank except default for
Mcc: 515
Mnc: 02
Difference globe and smart:
Min 15 min. (Smart 30)
Hsdpa in hotel room manila (h2o), smart no net
Robert
robert.vienna said:
For my android lg p500 optimus one with globe tatoo prepaid works perfect
Name: myglobe internet
Apn: http.globe.com.ph
Authentification: pap or chap
All other fields blank except default for
Mcc: 515
Mnc: 02
Difference globe and smart:
Min 15 min. (Smart 30)
Hsdpa in hotel room manila (h2o), smart no net
Robert
Click to expand...
Click to collapse
Can you send mms with this settings..?
have you tried testing the speed using speedtest?
3g network for xperia x10i
does anyone know how to open a 3g connection? i bought my phone in taiwan.. but when i came back here in the philippines, i dont even have any 3g network ..
my phone is SE xperia x10i running on 2.1 .. tnx a lot.. any help wud be highly appreciated
Has anyone been able to send an mms on their G1 & have a good 3G connection?
da_vi0l8er said:
Does philippines have a 3G network? I can't seem to get any...
Click to expand...
Click to collapse
yes, there is a 3G Network here in the Phils. (surprisingly so)
you just have to create an APN with the correct proxy settings, and voila! you now have 3G Network reception. just make sure that you've set up a dummy APN so the open 3G won't eat up credits while you're not using it.
eiblew said:
yes, there is a 3G Network here in the Phils. (surprisingly so)
you just have to create an APN with the correct proxy settings, and voila! you now have 3G Network reception. just make sure that you've set up a dummy APN so the open 3G won't eat up credits while you're not using it.
Click to expand...
Click to collapse
My plan was to disable data under settings and use 2G only to save battery. Any additional benefit to using a fake apn?
help
I've wasted so much load on trying to get the internet to work on my HTC Desire S.
Does anyone know the proper settings?
I've tried all the stuff that was given to me online and i can't figure out the problem.
HElp Help
Snaproo said:
I've wasted so much load on trying to get the internet to work on my HTC Desire S.
Does anyone know the proper settings?
I've tried all the stuff that was given to me online and i can't figure out the problem.
HElp Help
Click to expand...
Click to collapse
hi there, the settings above have posted the correct values already
and here are some guidelines:
Name: myglobe internet
(you can actually put any name here, as this is just an identifier for the APN setting for your phone, much like how you can rename your Local Area Network on windows)
Apn: http.globe.com.ph
(take note its a <dot> that succeeds http and not a <://> remember this is not a protocol but an access point name)
Authentification: pap or chap
(there is a "pap or chap" option, this does not mean choose any between "Pap" or "Chap", as the former means both)
All other fields blank except default for
Mcc: 515
Mnc: 02
APN type: internet (please select this explicitly, its labeled "internet")
I've even tried those but still no success. I don't know why.
Happen to be in the USA at the moment and have not gone to sleep yet.
Here is the info I had saved. I believe it matches the other post. you might see if you can set up internet using another carrier, just to verify that the problem is not elsewhere in your phone settings or a hardware problem.
APN Settings for Globe
Postpaid APN: internet.globe.com.ph
Prepaid APN: http.globe.com.ph
Prepaid APN setup 2: http.globe.com.ph
Authentification: pap or chap
All other fields blank except default for
Mcc: 515
Mnc: 02
APN Settings for Smart Bro
Postpaid APN: smartbro
Prepaid APN: smartbro
APN Settings for Smart Buddy, Smart Gold
APN: internet
APN Settings for Sun Cellular
Prepaid
APN (static): minternet
Authentication: PAP
IP address: dynamic
Postpaid
APN (static): fbband
Authentication: PAP
IP address: dynamic
APN Settings for PLDT WeRoam
Postpaid: WEROAMPLAN
PS A good source for APN's in general is http://code.google.com/p/cyanogenmod/wiki/APNlist
PPS If you are in a location with a large mall, you could go the globe, smart or sun location and ask. Once you have one internet setup the second apn is not a big deal. You do have settings/mobile network settings/data enabled and settings/mobile network settings/2g only unchecked correct?
If it doesn't work does that mean the phone is messed up? WiFi works on the phone and everything else is fine. Just I can't seem to get any connection with my supersurf50..
Thanks
Snaproo said:
If it doesn't work does that mean the phone is messed up? WiFi works on the phone and everything else is fine. Just I can't seem to get any connection with my supersurf50..
Thanks
Click to expand...
Click to collapse
My guess is that it is some setting in your phone.
Are you connecting to the internet but they are charging you incorrectly? Have you confirmed that you are signed up?
SUPERSURF STATUS and send to 8888
Explore3 said:
My guess is that it is some setting in your phone.
Are you connecting to the internet but they are charging you incorrectly? Have you confirmed that you are signed up?
SUPERSURF STATUS and send to 8888
Click to expand...
Click to collapse
it says i am currently registered to supersurf.
i reset to default. its the postpaid apn.. and went in to edit it again.. but no E, G or H symbol next to the network connection icon...
ahh headache.
Snaproo said:
it says i am currently registered to supersurf.
i reset to default. its the postpaid apn.. and went in to edit it again.. but no E, G or H symbol next to the network connection icon...
ahh headache.
Click to expand...
Click to collapse
Have you played around with these settings:
settings/mobile network settings/data enabled
settings/mobile network settings/2g (you want this off when you want data access)
settings/mobile network settings/network mode (see what happens when you choose WCDMA only, this would at least show that you have a 3G signal, try a different location)
Good luck!
PS I do not have an HTC Dream, so I do not know if there are any phone specific settings that you can do.
PPS I hate to ask the question, have you verified that this phone operates on the 3G frequency (2100Mhz) used in the Philippines?
Snaproo said:
it says i am currently registered to supersurf.
i reset to default. its the postpaid apn.. and went in to edit it again.. but no E, G or H symbol next to the network connection icon...
ahh headache.
Click to expand...
Click to collapse
i had this issue last month
where it says i am registered to supersurf but even when i say supersurf stop
it still persists
turns out the supersurf promo is no longer active
and only power surf is now offered
i wonder why the supersurf is still not considered as an invalid keyword for 8888 service number
darn globe, they should be reprimanded again for this
Did a search and checked all FAQ's but i cant seem to find anyone with the same problem as me.
Phone keeps telling me i have no network but im getting 2-4 bars of signal. I cant go on the internet, youtube, facebook ect... unless i turn wifi on.
Phone details:
Im rooted and sim unlocked.
Im up in Canada, on the FIDO network
In the mobile network settings, it says EDGE, but i should be getting 3G.
TMO Vibrant SGH-T959
firmware 2.1 -update 1
kernal 2.6.29
Service state says "in service" but mobile network state says "disconnected"
For some reason im on roaming even if im no where near the border.
I have set data roaming to ON to see if internet would work but it didnt.
This is my first android phone and im very new to all the menu's and settings! Any help is appreciated!
Thanks!
TMO Vibrant SGH-T959
Fido
This explains all.
only Wind mobile uses AWS(1700/2100) same as T-mobile.
Their 3G phones don't work with Rogers(Fido)/Bell/Telus.
Ah man no way!!!
So there is nothing i can do to make this work then?
boravr6 said:
Ah man no way!!!
So there is nothing i can do to make this work then?
Click to expand...
Click to collapse
Best thing you can do is to switch to wind.
Right now they are giving 150$ porting credit also
Make sure you also have a data package on your line, and change the APN to Fido's settings. You'll at least get the EDGE connection which is better than nothing.
Other option would be to sell the Vibrant and get a Captivate, which has Fido's 3G frequencies.
It should be possible for you to get 3G with FIDO since they use 1900 MHz and the Vibrant has a radio for that frequency
www . engadget.com/2010/08/22/confirmed-galaxy-s-unlock-codes-are-stored-in-your-phone-vibra/
http://forum.xda-developers.com/showthread.php?t=762068
Apparently the last two posters haven't been reading much on the forums lately?
Get to your APN settings first
Menu ---> Settings --> Wireless and Network --> Mobile Networks --> Access Point Names. You should see T-Mobile US.
Then hit the Menu button again and select New APN. Enter this info into the respective fields
APN1
Name: fido internet
APN: internet.fido.ca
Username: fido
Password: fido
APN Type: default
(all other fields blank)
Enter everything here, I cannot guarantee this will work, as I do not have AT&T service. But it's more than what you got now. Make sure you go back to that menu and select this APN is the one you want to use.
DO NOT delete the T-Mobile one, as you may need it at a later time.
Hope this helps
Also if you have trouble with MMS: Try these in the messaging settings.
APN2 (for MMS and such)
Name: fido mms
APN: mms.fido.ca
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.011.013
APN Type: mms
(all other fields blank)
Will try all this as soon as i get home!
Thans for keeping my hope alive!!!!
Ill keep everyone posted on how i make out.
I was about to say... its a problem with APN settings, if you have internet service on your plan, then you should be able to go online at least with EDGE... its the same as getting an iphone for tmobile
dq13 said:
I was about to say... its a problem with APN settings, if you have internet service on your plan, then you should be able to go online at least with EDGE... its the same as getting an iphone for tmobile
Click to expand...
Click to collapse
you got it!
does the vibrant phone have the capacity to go 3G even if tmobile doesnt offer it?
All 4 SGS seem to have the exact same specs... So if ATT (captivate?) has 3g, the vibrant should be able to get it right?
tmobile does offer 3g, it is just on a different band than the one from ATT, but for what has been going around these past few days, some have been successful using 3g vibrant from tmobile on ATT since there is at least one band that matches, coverage is not as great as with an original att phone, but works. I haven't tried it myself since I don't have an ATT SIM to try it
Where can i find what bands are used? I would like to compare what my fido carrier uses compared to TMO and ATT for 3G network.
AT&T uses 850/1900 for 3G
T-Mobile uses 1700(AWS)/2100
I know wikipedia has the whole list of all the carriers but most Canadian providers use AT&T bands including Rodgers/Fido.
If I remember correctly only Wind uses TMobile bands
You sir.... are a god among men!!!
IT WORKED!!!
Now i need to track down ATT users to find out what they did to get onto the 3G !!!
ty so much 0c3rulez!!! /bow!
oc3rulz said:
Get to your APN settings first
Menu ---> Settings --> Wireless and Network --> Mobile Networks --> Access Point Names. You should see T-Mobile US.
Then hit the Menu button again and select New APN. Enter this info into the respective fields
APN1
Name: fido internet
APN: internet.fido.ca
Username: fido
Password: fido
APN Type: default
(all other fields blank)
Enter everything here, I cannot guarantee this will work, as I do not have AT&T service. But it's more than what you got now. Make sure you go back to that menu and select this APN is the one you want to use.
DO NOT delete the T-Mobile one, as you may need it at a later time.
Hope this helps
Also if you have trouble with MMS: Try these in the messaging settings.
APN2 (for MMS and such)
Name: fido mms
APN: mms.fido.ca
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.011.013
APN Type: mms
(all other fields blank)
Click to expand...
Click to collapse
boravr6 said:
You sir.... are a god among men!!!
IT WORKED!!!
Now i need to track down ATT users to find out what they did to get onto the 3G !!!
ty so much 0c3rulez!!! /bow!
Click to expand...
Click to collapse
Not a problem at all, glad I could help.
Do you not have 3G on Fido?
*EDIT* I just checked Fido Bands. They are 850/1900 as well. So you are most likely in an area that uses 850(which the Vibrant doesnt have) like AT&T. If you travel around see if 3G pops up in other places.
Usually when im in the basement my iphone doesnt get 3g... but if i lay it flay on my desk and dont touch it... sometimes it will pick it up.
So i took my vibrant out for a drive yesterday just to see if i would pick up 3g and i didnt...... BUT...
Woke up this morning and found the 3g logo on with my phone being on my desk in the basement.... like my iphone!
Good sign! Today im taking the vibrant out as my "daily driver" for the first time (with my simless iphone in my pocket as backup lol)
Ill let you guys know my findings tonight.
I think you totally got it, but just to be clear for others reading this thread, your Vibrant will work some of the time on 3G and some of the time on Edge when using the Fido network.
The Vibrant receives 3 different 3G frequencies: 1700/1900/2100.
Fido uses 2 different 3G frequencies: 850/1900.
Some Fido areas have only 850, some have only 1900, and some have both. If you are in an area that has 1900, then your Vibrant will get 3G. Wind uses 1700/2100, so it better serves your Vibrant.
On the other hand, the Captivate will receive 3G in two different bands: 850/1900. This means that when used on Fido, it will always work in 3G (where available). If it were used on the Wind network, it would always operate on Edge.
Note that all of this requires setting the carrier-appropriate APN, which you have already done for Fido.
^^^
WOW .. that clarifies EVERYTHING! Thanks so much for posting that.
Which also explains why today i saw jumps from 3g to edge ect...
Thanks for the post!
Currently experiencing "hiccup" in internet/data experience with my focus. If phone is not in 3G+ mode, i get no data.
Can someone confirm my theory;
Situation:
Purchased Samsung Focus from rogers, thus rogers network profile (preset network setting for data usage such as MMS or internet).
Unlocked and stuck in bell SIM. can send/recieve calls, and txts, use data (internet, marketplace, weather updates, etc) if phone is in 3G+ mode (seen by tapping near top of screen). Can not use MMS
Presumable:
1)Focus was initially programmed to work on Rogers network.
2)Focus/Rogers, have a GPRS & EDGE capability
Theory:
Focus is programmed to use 3G radio for data (which is more widely accessible, & consumes less power), until detects 3G+/HSPA network and switch to that HSPA radio.
Since bell does not have a GPRS or EGDE network, when phone tries to receive data through 3G radio, it get nothing because no GPRS or EGDE network.
Is this possible, can phones change network they're using?
Theorized Solution:?????
Since Bell has 3G+ network,and they offer LG quantum. Could LG quantum be initially programmed to only use 3G+/HSPA, therefore anytime data is requested it activates the 3G+ radio.
If this is true of the LG quantum, could this be programmed into the Focus as well.
Thus i ask the community is this possible and how to implement solution?????
Sidenote:
I know the easiest solution would be to change to Rogers, however, Canadian provider fees are ridiculous (i'd be incurring early cancellation fee + a new restrictive costly plan from rogers) and there are others which don't have a choice but to use bell, and should have the freedom to choose a device of there choice with a little work.
I'm hitting a similar issue on Fido. The cell side works, and data only works if I enable data roaming. I downloaded the Network Profile app, but it won't let me get anything as it tells me "The application can't be launched with your mobile operator."
colinbo said:
I'm hitting a similar issue on Fido. The cell side works, and data only works if I enable data roaming. I downloaded the Network Profile app, but it won't let me get anything as it tells me "The application can't be launched with your mobile operator."
Click to expand...
Click to collapse
I think in your case it's just a matter of adding a APN.
Follow the instruction in the follow thread:
http://forum.xda-developers.com/showthread.php?t=843517
a search for "FIDO APN" on google, and i found this;
FIDO
Name: fido internet
APN: internet.fido.ca
Username: fido
Password: fido
APN Type: default
Leave All other Settings Blank
MMS
Name: fido mms
APN: mms.fido.ca
MMSC: http://mms.fido.ca
MMS Proxy: 205.151.011.013
APN Type: mms
Leave All other Settings Blank
That should get your data working, and you wont be incurring roaming charges.
Other then that, let me know if your having a similar issue to above, i don't think you should as FIDO is a pure GSM network from day one so it'll have GPRS/EDGE/HSPA
MMS
Interesting the various issues people are having with connecting to different networks...doesn't seem to be a one-size-fits-all issue/solution.
In my case, I got a new Rogers sim card (unlocked AT&T branded Focus from Expansys), put it in, updated my APN info, and I have voice and data.
BUT, I have no texting/messaging ability! I know others have listed the MMS settings for Rogers, but the Focus seems to only allow adding *one* APN setting. No clue where the MMS settings can be applied.
Other friends who have Rogers sims were able to put it in their Focus and had no problems at all with texting, internet, etc.
Anyone have thoughts on this issue, please respond.
reaver_shadow said:
I think in your case it's just a matter of adding a APN.
Follow the instruction in the follow thread:
http://forum.xda-developers.com/showthread.php?t=843517
Click to expand...
Click to collapse
The instructions appear to be for the LG device, not the Samsung Focus. The code doesn't get me into any factory menu. The diagnostics screen just sits when I type in the code. I downloaded the Network Profile app but it errors out saying "The application can't be launched with your mobile operator".
Facepalm
OMG, I'm an idiot!
So apparently Rogers requires 1+area code for sending texts? Telus didn't...*sigh*...
So yes, I have texting ability (haven't tried MMS though).
Samsung's response:
http://www.wpcentral.com/samsung-our-phones-do-not-support-network-reconfiguration
Now that this issue got publicity lets see how long they keep up this attitude?
UPDATE:
COuld it be MS to the rescue?
"Microsoft is aware of the problem and it has been escalated."
Source:
http://www.wpcentral.com/windows-phone-7-unlocked-devices-and-mms-quite-mess
Not much to add other than I'm in the same situation as reaver_shadow. Bought from Rogers, unlocked it and put in Bell SIM card. Everything works except MMS and data if not on 3G+ (will work when '3G' is displayed, but I guess it's borderline). Tried playing with option *#2263# in Samsung Diagnosis (##634# + Dial), but does not fix the issue. Hoping the Network Profile will become available for changing. Using the Network Profile app from Samsung does not work. Says it does not work with my provider. Says active profile is 'Rogers'.
Update:
Probably just lucky, but I have had a steady connection since this morning. I set option 2-7 under Diagnosis option *#2263# (use all WCDMA Band). What maybe did the trick is enabling Roaming, as mentioned by @colinbo. My apn is set to pda.bell.ca.
Update:
Nope, just luck. :-(
Have you tried this:
http://forum.xda-developers.com/showthread.php?p=9709346#post9709346
That's how I got data working on SaskTel. Since we're using similiar technologies, it may work for you as well.
That's great!! I'll give it a try. Never thought about pressing the 'back' button. I should know next week if this solves it.
I was playing around with the free tethering via using a new APN and totally forgot which one of the preloaded locked ones should be chosen if not using it. Is it:
AT&T US
wap.cingluar
or
AT&T US HSDPA
phone
thanks
dperls said:
I was playing around with the free tethering via using a new APN and totally forgot which one of the preloaded locked ones should be chosen if not using it. Is it:
AT&T US
wap.cingluar
or
AT&T US HSDPA
phone
thanks
Click to expand...
Click to collapse
AT&T US HSDPA out of the box on my phone.
Mine was set to at&t US out of the box, but I was doing a shared upgrade, so I was using my old sim. Anyone else want to chime in?
just set a new custom one that was posted here for unlimited data
clubtech said:
AT&T US HSDPA out of the box on my phone.
Click to expand...
Click to collapse
this is correct
Would someone mind posting their APN Settings for US HSDPA please? Almost all the settings are blank on mine except for name: AT&T US HSPDA, APN: phone, MCC:310, MMNC: 410, and APN Type: default,supl,agps,fota,dun
edgeicator said:
Would someone mind posting their APN Settings for US HSDPA please? Almost all the settings are blank on mine except for name: AT&T US HSPDA, APN: phone, MCC:310, MMNC: 410, and APN Type: default,supl,agps,fota,dun
Click to expand...
Click to collapse
Those are the same settings I have for mine....
edgeicator said:
Would someone mind posting their APN Settings for US HSDPA please? Almost all the settings are blank on mine except for name: AT&T US HSPDA, APN: phone, MCC:310, MMNC: 410, and APN Type: default,supl,agps,fota,dun
Click to expand...
Click to collapse
Mine is also mostly blank, is it because I used my old 3g sim, or maybe these settings only work if you pay for the tethering option?
When I choose AT&T US HSPDA I don't have internet access at all.
James62370 said:
Mine is also mostly blank, is it because I used my old 3g sim, or maybe these settings only work if you pay for the tethering option?
When I choose AT&T US HSPDA I don't have internet access at all.
Click to expand...
Click to collapse
I'm using that APN with the same settings and my 3G sim out of my 3GS with no issues. You may need to validate the data plan you have with AT&T. Since I was on the Enterprise iPhone Unlimited plan, they moved me to the Smartphone Data Unlimited 4G Plan with 200 SMS. Not sure what plan you're on, but maybe that has something to do with it.....