Related
In one hand, using the Wifi router is simple. On the other hand, Wifi draws more battery power than bluetooth...
How long do you intend to use it for as, in my opinion, both are a poor long-term solution due to the power draw.
Also, bluetooth may use less power but it will also create a bottleneck that will mean that you have to use it longer.
Yes both will eat power. Cable is much better, however if you have no choice then I'd use bluetooth it consumes a bit less power than wifi.
That said if you use Linux, as I do on some laptops, (and maybe Mac? I dont use.) you might have some trouble getting internet to flow through bluetooth, in which case wifi is better.
I would use WiFi, much easier to setup and use on the fly just as any wireless router is. In either case, I believe your best bet is to have it plugged in during use as power usage will be high either way!
The Wifi router of the HD2 only supports WEP.
That's a "no go" for me...
Jack Daniel's said:
The Wifi router of the HD2 only supports WEP.
That's a "no go" for me...
Click to expand...
Click to collapse
Why not? What secrets do you have on your pc....and do you live in an apartment block surrounded by hackers?
I can plug my hd2 into my laptop and surf the net via mobile web. But how do i set it up so I can use the hd2 as a WiFi modem ?. Even with WiFi on, it still uses mobile web. Updating my laptop via my hd2 takes hours lol.
BTW I have WiFi router in my home.
fallenmonk said:
I can plug my hd2 into my laptop and surf the net via mobile web. But how do i set it up so I can use the hd2 as a WiFi modem ?. Even with WiFi on, it still uses mobile web. Updating my laptop via my hd2 takes hours lol.
BTW I have WiFi router in my home.
Click to expand...
Click to collapse
You have to have the WiFi router app. Google XDA WiFi router for Windows Mobile you will find it. Oh and by the way just because it is WiFi does not mean it will increase the speed. The speed is dependant on your cellular data signal you know Edge or 3G.
I have never used the wi-fi app, and have had no need to do so so far. Bluetooth works two different ways--through DUN or PAN.
However, I could see certain situations where that could come in handy. FOr instance, with a device that cannot BT tether, but can access wi-fi--for instance if one has an Ipad
Hi,
I live in Australia. I bought a SGS from UK. It has nothing changed in firmware its the same as it comes from the box. (just a few games and apps installed from the android market).
My problem is when I connect the SGS to my laptop through the USB cable and I chose "PC INTERNET" I get a connection but i get a lot of drop outs, I would say being honestly every 5 minutes my connection drops. I live right in the city and my phone has good reception so its not the reception.
I haven't tried teethering (i dont wanna teether coz mobile plans says, NO teethering).
What can I do to fix the drop out connection problem.
if you are using your internet via the LAPTOP over the USB cable, then you need to figure out WHY your LAPTOP is not connecting properly to the Internet.
it takes about 1 min to connect and when it connects i choose HOME connetion. than it works good for 5 mins and it drops out and reconnects itself.
Correct me if I've read your post incorrectly but isn't what you're doing tethering?
From Wikipedia: "Tethering is the use of a mobile device such as a mobile phone to supply Internet access for another device which is otherwise unconnected, using the mobile device as a modem. This can be done through Bluetooth wireless technology, Portable Wi-Fi hotspots, or cables (such as USB)."
well yes and no...
it is teethering but carriers cant prove that.
however
if i do select teether on my phone it says something like this option will use black hole date or something (from my understanding is that it will use different data to my free date) so i choose to try the cable connect than select interent connection.
anyways the problem is still there... has anyone got any solutions or give me some ideas?
thanks
are you trying to use your phone as a modem or not?
if you are, then we can help you there are many ways to do it.
but if you are doing the opposite, using your laptop internet, for your phone to access internet (which doesn't make any sense at all) then we can't help you as it's a laptop problem.
im trying to use my phone as a modem but in a way without carriers finding out im actually using my phone to teether.
my problem is that my connection keeps droping every 5 minutes for 10-30sec.
I use my Galaxy as a modem and I had nothing but hassle when connecting using the cable. I found out its far better to go into settings then wireless settings then switch mobile AP on. Your phone sends the connection over wifi to the pc and gives me no hassle at all.
I reckon the only way your service provider would know is by looking at how much data you use so just be careful and you should be fine. Or find out what your monthly limit is and put a data counter on the phone, I use Netcounter, its free and simple but gives the info you need like daily, weekly and monthly usage
yup, the wireless method is by far the easiest one, and best of all it is build in!
as for your cell phone provider finding out, regardless of what you do, they don't care, they only check how much data you used up, and charge you that amount
well im on 1gb per month. Plenty of data there.
I tried another method today: turn bluetooth on and connect through bluetooth and that seem to works perfectly. I was online for 3 hours without dropping once.
Now I`m wondering why was it dropping with the cable connected? And not even once through bluetooth!
I understand your Problem, but at time i reading your last Post i have an question.
I understand your Posts that you dont use Wireless thether becouse your Carrier dont Allow Laptops to Acces Wireless conections right?
But it makes no difference if you use the cable or a wireless conection to thether your Internet. If you surf under the radar you dont getting into troubles. And there is no blackhole Data when you tether wireless. Its a gprs, edeg, 3g or umts Connection and your Phone manage this automaticly. So now comes my question. Why you dont use the build in wireless tether function which is the fastest and easiest way to connect. You dont need the phone directly near the laptop, you can give it to the point of best data connection, okay and a powerstrip for the akku. But its much faster then the Bluetooth connection, becouse of wlan.
Sent from my GT-I9000 using Tapatalk
"And there is no blackhole Data when you teether wireless"
From now on I will use the AP to connect. I thought the carriers (OPTUS) might find out. But since they can't find out than this is the best option. Thanks for confirming they cant find out weather I connected my laptop or just used the date from my phone.
This remind my at the old days where you share your internet connection thru a soho rooter or just another pc with 2 network cards built in. In these early days the Provider says its forbidden to use the connection for more pcs than one. But in fact they never could meassure this and no one ever gets an letter from them or an contract decline/service interuption. The truth is, that there was a kind of law process against them and now the isp's is forbidden to limit the usage of your internet connection to only one device. So that means not that you get unlimited numbers of ip adresses, but you can NAT as much devices you want. Now you get from every ISP a Preconfigured router if you like.
And the same will hapen over a pariod of time to the wireless providers as well. Its your connection so you can use them the way u like it. Its already happend here, you can buy umts router for your home.
Where i live there is no question like this. Just do it. But maybe its becouse of our mentalogiy. If somone says no the typical austrian will do it anyway and gives no dime to what others say. If no one forbid you something then its allready allowed to do. ;-)
Greetings to Australia (the country with the kangaroos) like we here in Austria say. lol
Sent from my GT-I9000 using Tapatalk
Thanks for that info. That takes my concerns/stress away. Just didn't wanna receive a thousand dollar bill that's all I cared
So the if the phone connects over wifi it drops the data connection that might've been present on your phone network connection. Is it possible to configure your phone to maintain both wifi and 3G/HSDPA connections at the same time?
I require this because my operator provided (H3G UK network) Skype application only runs on 3G and I have to keep turning off wifi for it to work.
Funny, I find this feature great!! With my WM phones I never knew if it was using wifi or my data connection....even if you can do this how do you make one app use one connection over the other?
Sent from my GT-I9000 using XDA App
Good q, i'd also like to know if it's possible...
Sent from my Samsung Galaxy S! ^_^
You can try droid wall, and configure it to block wifi for skype, it may solve your issue.
Sent from my GT-I9000 using Tapatalk
Hmm, doesn't sound like that will work, because the phone has already dropped the phone network data connection as soon as I get back home onto my home wifi network (due to prioritisation?) I want the phone to maintain both so I can receive incoming Skype calls at home with fiddling with my phone. I understand why the phone does it and it is sensible for it to do so in most cases, but just not for my usage requirements!
Is it a software/hardware limitation that wifi and phone network data connections can't be open at the same time?
Install Nimbuzz. It supports Skype without that bulls**t restriction. It doesn't support group chats though.
Tundraswan said:
So the if the phone connects over wifi it drops the data connection that might've been present on your phone network connection. Is it possible to configure your phone to maintain both wifi and 3G/HSDPA connections at the same time?
I require this because my operator provided (H3G UK network) Skype application only runs on 3G and I have to keep turning off wifi for it to work.
Click to expand...
Click to collapse
if WiFi is on, and 3G is on
the phone automatically uses WiFi first
AllGamer said:
if WiFi is on, and 3G is on
the phone automatically uses WiFi first
Click to expand...
Click to collapse
I lose the "H" or "3G" notifier when the phone connects to wifi, that's why it looks like it's purposesly dropping the data connection once it picks up my wifi, I can't see a way to maintain both simultaneously.
I'm using "Skype for 3" provided by my network, it has special integration on the 3 network which allows me unlimited Skype usage (inbound and outbound) without it eating into my data plan. So with this benefit I don't really want to use an alternative app.
I want to keep Skype running all the time so I can receive calls on it, but once I get home, the wifi kills the "H"/"3G" connection, which means my Skype can't receive calls.
the icon isn't there but i think the data (H / 3G) is still running in the background, incase your Wifi fails.
wifi is the... PREFERRED network?
have you tried getting your friend to call you via skype while you're on wifi?
Im trying to use the 3G hotspot, and GPS2BT to allow my tablet to access maps with data and GPS from my droid X.
But everytime I turn on the hotspot it shuts down BT, and if I re-enable it, the BT turns off 3g hotspot.
Is it possible to use both, if not, why? To much power draw using 3 radios??
You cannot use 3G + WiFi + Bluetooth simultaneously. Something to do with radio and antenna sharing, I believe.
-----
Sent from my Droid X. Powered by Big Red, customized by NATF.
The reason it wont work I believe is a result of verizon's setup. When you turn on the hotspot app, it pulls your data connection and changes your dun settings to allow the wireless adaptor to broadcast a wireless signal. You are no longer receiving data as if you were trying to.access information though an application.
I think natf is right. When you toggle bluetooth, I think it kills any other "radio" connectivity.
Sent from my DROIDX using XDA App
try making a call on a BT headset with wifi enabled, then go to a web page... its ... interesting.
Ah ok - Damn. I was hoping to share my wifi with my android and then use BT to get GPS.
Guess its one or the other.
I dont think i can do BT PAN + any other bt service can you? then i could do both with BT..
Morkai Almandragon said:
try making a call on a BT headset with wifi enabled, then go to a web page... its ... interesting.
Click to expand...
Click to collapse
I was under the impression that you can't call and surf at the same time with Verizon.
silversonic1 said:
I was under the impression that you can't call and surf at the same time with Verizon.
Click to expand...
Click to collapse
You can surf when WiFi is connected. Although I could do both over 1x with my Touch Pro2.
tl;dr: When my phone (Sony Xperia Z5 compact, Android 6) connects to a wifi with no internet, I want to use the local network on the wifi but use the internet from my mobile data. Instead what happens mobile data doesn't switch back on while connected to wifi with no internet.
I have been trying to find a solution for this since forever. My camera creates a local wifi connection which I can connect to to view the camera as well as controlling it. The downside is that while connected to this network my cellular data gets switched off, despite this wifi network not having any internet. So while using my camera I have no way to access the internet. It wasn't a huge problem up until recently when the app I use is introducing livestreaming. I really want to use it but I am unable to find any way how to keep my phone connected to this wifi network (and being able to use it), while any internet data goes over 4G. I am using android 6.0.1. I am quite sure I was able to do this on my previous phone with an older Android version but I cannot find said option (smart network switch or something?) anymore in the wifi settings. Nor any recent similar topics with people with the same question? Anyone that knows more about this?
My phone is rooted. If I need to do any system changes I can do that.
I didnt get what you were trying saying.Do you know that you cant use mobile data and wifi simultaneously unless your device is rooted.If your phone is rooted then try using "download booster"
hh950430 said:
I didnt get what you were trying saying.Do you know that you cant use mobile data and wifi simultaneously unless your device is rooted.
Click to expand...
Click to collapse
Err, sorry, lol. I have wifi network that has no internet, just a local network. I'd like to be connected to that wifi network AND be able to use internet over my mobile data both at the same time. As it is right now, my mobile data gets disabled even when the wifi network has no internet access.
I have talked to two friends of mine about it and both say this is already possible in Android. One friend sent me a screenshot of an option he has in his wifi settings called 'Switch to mobile data' which gets enabled when the wifi network has no internet. My other friend said he doesn't have this option but claims it has been a default feature of Android since lollipop. He tested it on his phone and indeed it works as expected. Both have an unrooted phone with stock Android. So now there is me with my brand new phone and Android 6 and I can't find this option nor does it seem to do what I want by default. I'm confused.
As I mentioned, my phone is rooted so if there is a way to turn this feature on using root, I can totally do that if someone knows how.
As i said try using "Download Booster" It allows you to use wifi and mobile data at the same time just google it.
hh950430 said:
As i said try using "Download Booster" It allows you to use wifi and mobile data at the same time just google it.
Click to expand...
Click to collapse
That appears to be just a download manager if I am correct? I don't need to download anything. I just want to be able to use my existing apps to use my mobile internet when I am connected to wifi (that has no internet).
This is the exactly the thing I'm after. Screenshot from my friend's phone (LG G4 with Android 6.0): (*link removed). My other friend who also has this functionality working has a Nexus 5 with Android 6.0.1.
* Forum doesn't let me post screenshots.. But basically in his wifi settings he has an option called "Switch to mobile data". The box says "Internet unavailable via connected Wi-Fi. Stay connected to Wi-Fi, but use mobile data. Data charges may apply."
Again, I have Sony Xperia Z5 compact with Android 6.0.1 and I can't find this. Have I bought the wrong phone or is it fixable? At this point I am more than happy to even take a custom rom route.
You cannot use wifi and internet at the same time as they are completely different hardware components, using different air waves, so there's no conflicts between them. Better use internet through your wifi or use bluetooth tethering.As for the "switch to mobile data option" it disconnectes you from your wifi if it has no internet and connects you to your mobile data so it doesnt lets you use your wifi and mobile data at the same time
hh950430 said:
You cannot use wifi and internet at the same time as they are completely different hardware components, using different air waves, so there's no conflicts between them. Better use internet through your wifi or use bluetooth tethering.As for the "switch to mobile data option" it disconnectes you from your wifi if it has no internet and connects you to your mobile data so it doesnt lets you use your wifi and mobile data at the same time
Click to expand...
Click to collapse
It actually clearly mentions that it keeps connected to the wifi. He tested it and indeed he could use the local network on the wifi side and use the internet through his mobile data simultaneously. Both friends haven't rooted their phones or anything. This is just a default functionality for them. I have now tested it also on my older phones (Oneplus One and HTC One M8) and all phones can't have both connections open at the same time.
This wifi network is created by my camera by the way and I can't change much about it. The DJI drone I control does the same thing. When I am connected to the camera or drone I lose my mobile internet connection.
I don't have any other device that has access to internet here. We don't have cabled internet, only mobile internet.
Interestingly, in the developers options there is an option called "Mobile data always active" ("Always keep mobile data active, even when Wi-Fi is active"). I've tried it many times, rebooted my phone but this doesn't actually do anything. Even with this option on when wifi is connected the mobile data gets turned off.
This is beyond annoying!
I too have struggled to find a solution to this problem. I do not have a WAN connection to my home network. It is LAN only. I have four PC's, three Sonos speakers, two hdhomerun TV tuners, and various hand held devices that all use the LAN. All I want to do is be able to use my Moto X Pure to control Sonos and file sync to my LAN via wifi and simultaneously use mobile data for WAN stuff. I know the mobile connection is active with wifi enabled because I can see it when running if config, up route show etc... I am trying to learn about the routing tables to see if I can fix this myself. I love my android devices and am loyal, but this is beyond dumb! Any suggestions????
How to fix for android
okay so for anyone who doesnt know still go into the about phone option in your phone settings, then click on kernel version, build model, etc til one pops up with a flash notification saying click so many more times and youll become a dev. once you done that go into the developer menu and scroll too wifi assist or force mobile data upon wifi connection. exit out , open your app , bobs your uncle
Thank you for the answer.
I tried with my Huawei but it doesn't work. Could you tell with which phone you made it work ? Thank you !!
Ok here we go, after 12 years this my first post.
Above suggestions related with developer options nothing to do with OPs requirement. Those option only allows the device rapidly switch to mobile data when the WiFi signal gets weak. Since you always close to your DSLR camera it solves nothing because WiFi signal is always strong.
Root cause of the problem is you can not have 2 default gateways (i.e. router address) for your networks in any operating system (Actually you can but you have to set static routes, which is a pain in the ass for regular users)
iOS handles this in a very simple way. Set your wifi connection to static IP address instead of DHCP and leave your default gateway or router address blank. Viola you can have 3G/LTE data while you connected your camera and now you can sent your downloaded pictures via Whatapp while you still connected to your camera via WiFi. (In my case Panasonic Lumix)
I stumbled upon this thread via Google since I needed the same thing now with Android. But iOS way failed. Actually I am shocked that you cannot leave WiFi Gateway address blank in Androdid 8.0! Save button grays out if you leave it blank. This is really weird. At least with Galaxy S8 Duos with Android 8.0
So anybody know how to setup a WiFi network without a default gateway, please share.
Is this phone specific or something? Never had that happen, I have no problem with wifi being on without internet and using cell data.
I don't think the UI really exposes anything like it directly but you can technically have multiple gateways; it's not something your average user will understand (policy routing)..
Having said that, if you're attached to an AP you should at least see a /24 route out your wireless interface (standard dhcp lease). It's quite common for the AP to have client isolation but are you sure you're not using something like Wifi Direct or even adhoc?
Similar Experience
I have been through this experience long ago. All I did was to sell the phone and bought a new one.