I recently have been given a 2nd hand Atom Pure, but when i insert any valid simcard, the atom won't get a signal.
I don't know if locked or unlocked, but I didn't get any warning like " Invalid Simcard " or something else, the atom just can't get any signal ( tried 3 different simcard from 3 different operator )
Anyone have any idea to repair it ? maybe reflash the Radio part ?
I have simmiliar problem with old Qtek smartphone which can't get off the "Flight Mode", tried reflash it didnot work, sent it to warranty and come back healthy ( the seal did not even teared, so maybe it can be done via software ?? )
I can't send it to warranty, cause my friend give it to me from out of country, and I even didn't know that my atom still in warranty period or not.
Please help, It would be a waste if I can't get the GSM part work again
BTW, the ROM 20060426B1WWE.
Thank you
did you tried to reflash ROM?
No, not yet.
I'll try it, as soon as I finish downloading, I'll post the result
Thank you
I download :Xda-Atom-ENG-20060426-MOT0822_1.exe
Flashed the ROM, another problem appear !!
Upgrading Image Rom .......... Succeed
Upgrading BootLoader........... Succeed
Upgrading Ext Rom............... Succeed
Upgrading Radio Stack........... Succeed
Burn Radio Stack.................. Connection Error
Now I stuck at Utility Update screen ???!!
Tried to flash it second time, still got the error
Any idea to fix this ????
Please Help. Thank you
try to flash the older rom
tried to reflash it again, with another PC new active sync 4.2, still the same problem.
Tried to download official rom update fromm seeo2.com, it says there's no update rom for my atom (based on IMEI number, already preloded with the latest ROM), so I can't find the link to download.
@kropotov
Thank you so much for helping me in short notice, If you don't mind would you please give me the link to the older ROM ?? Can't find it here in forum.
Thank you
Try this:
Xda-Atom-ENG-20060105.exe
http://www.rapidshare.ru/91168
@kropotov
Thank you !!, I'll post the result !!!
Just reflashed again with official rom (Xda-Atom-ENG-20060426.exe), "Connection Error" Again ! (tried on three different PC)
Is there another way beside reflashing the ROM ?
Thank you
Xda-Atom-ENG-20060105.exe the result is the same ! tried on 3 different pc.
Is there any way that I can update it via Mini SD card ?
Any other way ?? please help
I thing the problem - the radio stack is locked by operator.... Try to serch for "unlock radio stack"
see here
http://forum.xda-developers.com/showthread.php?t=266758&highlight=unlock+radio
I've read above link you gave me, but it seem all the tools must be used in healthy state or at least can enter in to bootloader mode. while mine can't do anything, stuck in update utility screen (tried all button combination known to man)
I found a way to enter in bootloader mode, but when enter bootloader with mini sd inserted (dummy) it says "Start downloading". what I'm asking which way downloading proccess ?? atom to SD or SD to Atom ?
I found WM5 tool for dumping rom, it not specified for certain device. If I enable to dump healthy image rom to SD (from another and the same version rom of Atom), Is there any way that I can flash it to broken atom without in boot loader mode ??
I will keep reading above link you give me, I will be waiting your next suggestion and help.
Thank you so much.
http://forum.xda-developers.com/showthread.php?t=276664
the problem is I can't get into bootloder mode, always stuck in Upgrade Utility????. tried all button combination though
thank's
Found a way, use rec + camera + reset button.
In DM mode choose Exit DM, and my Ayom live again !!!!!!
BUT, Can't find any GSM in Wireless Setting, WTF !!!!!!
Tried to reflash it again
Thanks
reflash it in normal mode, result GSM gone. reflash it second time in bootloader mode, result good, GSM setting come back, but still can't find any signal ?!
Do I get GSM hardware error ?? or something ??
Thank you
there's a Selftest app. in the programs group, should use it to see what result will return after a GSM module test.
Already did, Self test in program menu and in Diagnostic menu. All result OK.
Just can get signal, I can't make Emergency call either.
Opened the Atom, Antena ok, all seems normal.
Nice thing happened to my hermes200: before christmas I upgraded it to the shap's rom, following the instructions... Everything was great until 2 weeks ago: without doing anything special the phone was not working anymore and the rest of the device was working very slowly. I tried several times a hard-reset but nothing changed. After this I tried to flash the rom with the original htc wm6 but it's impossible: at 12% everything freezes and the wizard says that there's a connection error ..From that moment I tried other several rom from different sites, some are faster and some slower, but every single one has the same problem: the phone doesen't work (It also shows "no GSM" every boot). Other interesting thing is that if it goes in standby, it's impossible to turn it on again and I have to soft-reset it.
But the best and amazing thing I found yesterday is this: if I go on the "device Information" of my device, with ANY rom there's NO RADIO VERSION, NO PROTOCOL VERSION and NO IMEI!!...
I tried to look on the net if someone had the same problem but, up to now, i didn't find any.
Thanks for everything, mediomat.
I too have the same problem with the device information settings. The version tab is displays no version, the Call Duration tab displays incoming and outgoing as unknown, the Identity tab only displays the proper Platform while Model No and IMEI are blank, and Hardware tab displays garbled text. Though, on the Hardware tab, it shows the RAM and Flash size as xxxxxxx MB.
I haven't had any luck either finding a solution to this.
Solution:
1. Check your SPL and flash HardSPL if you don't have it
2. Flash your shipped ROM
3. Repeat step #1
4. Flash back some Hermes cooked ROM
5. Done. Check Device info, if you don't believe me
Best regards,
aDEO
If the radio rom has been corrupted this STILL may not work... Its a brick... Sorry...
Still, no harm in trying....
My phone boots with No GSM displayed on boot and cannot perform GSM functions, and also cant read its own IMEI. Flashed one of schapp's OS to it with no success. I tried a forum post here that explained how to fix it and had some procedure of unlocking the phone, but when it tried to write to the sector for the GSM. it failed at 0%. I was using HTC_Hermes_SIM_CID_Unlock_v3a to do this.
Suggestions?
No GSM Signal and SD card not install
My phone boots with No GSM displayed on boot and cannot perform GSM functions, and also cant read its own IMEI.
pls help....
First try taking out the battery and putting it back in repeatedly until the radio ver. appears on boot screen. If that doesnt work then try doing a hard reset. If that doesnt work then try to do a full official rom and radio flash. It might get stuck at 11% but just keep trying to flash it.
Please help me, my device Dopod 838 Pro start booting with No GSM displayed on bootscreen. No signal and cannot perform GSM functions, what should I do? Please?
I did downgrade my radio from 3.42.50 to version 1.x using SPL 0.41
like someone's thread on xda to get standalone GPS.
Now I have an issue, seems like as u said, some portions of radio aren't overwritten.here some symptoms I got :
1. when booting, WM6 said "Phone Off". in comm manager its status is Flight mode. when I turned on the phone, a pop up shown "Phone is off, do you want to turn it on?" I press yes, but the radio shown no signal. when I tried to make call, phone was turned off again. Can't make any calls at all.
I try with some of official and customize rom.Result is the same.
2. when I enter EPST ##778 and make some changes and then press OK, it said "Turn on LPM failed. Press OK to reset device".
Software and Firmware version can't change
It still 3.09.666.1 and radio rom is 3.42.50.
CDMA setting/EPSt show the item "EVRC enabled" is out of range.
EVRC Enabled: Disabled
Home page: Wild
Home Orig: EVRC
Roam Orig: .......
Can't change anything...It will stop with Written Item "..." error
3. when I use QPST to make PRL changes then press Write to phone, the gauge bar showed 100% but then the device automatically reset (soft). The QPST then showed message something like "Writing process not finished".Same problem shown when I tried to back to 3.42.50 with SPL 2.31.
So, any ideas to help this noob?
Thanks a lot
I am quote this word form
edimonoarfa
http://forum.ppcgeeks.com/showthread.php?t=26082
Dangers of downgrading after installing GPS radio (and a little on signing)
Please help me...
I try to solve this problem for a week.
I read in this forums and xda.., I couldn't find the solution.
What should I do?
Anyone can help,
plz contact by E-mail
plz help , or give me an advise
You shouldn't have downgraded the radio. If you got your hands on ImCoKeMaN's guide, you probably should have read it fully before doing anything. In any case, try flashing the Bell rom, which has 3.42.50 on it (it is a stock rom, so you might be in luck). That might help...
Hey did you fix your problem??
im having the exact same problem. any help anybody?
chrisonline909 said:
im having the exact same problem. any help anybody?
Click to expand...
Click to collapse
Did you read my post?
Hello,
I have a tytnII orange france radio 1.27.14.32.
I update my rom to MyPPC_MLs_K3.1_0816.zip using jump_1_56 because I can't update without it.
So the phone started normaly but the sound, camera not ok.
So I read that I must update also the radio. I downloaded the Kaiser_Radio_1.71.09.01 from http://webftp.myppc.it/index.php?dir=Kaiser/Radio/
I have found two methods :
the first is http://forum.xda-developers.com/showthread.php?t=393182
I tried it but when the phone is in the bootloader screen, he disappear and make a white page with a blue 'loading...' in the top,
I wait for 10 minutes and nothink ...
So I stopped the procedure, and the phone retart normaly with no problem.
I tried twice, the same problem.
So I start the second method, using the KAISERCustomRUU.exe, and of course jump_1_56 to get the bootloader screen with jump, so the procedure start with no problem until 99% ................. and here .............. ERROR ...
And now when I try to start my mobile phone, I have only t he bottloader screen with my old radio and STOPPPPPP.
In this point I try another time the first procedure with the sd card and radio 1.27.15.32 and nothing ...
NEED HELP PLEASE
original spl 1.81.000