Database Users

[APP] WM6.5 SmartLock / WM6.1 csdevctrl low memory wm device lock

Try it just get this from others forum and it's free....
Auto Lock v6.06 (CSDEVCTRL)
The locking can be activated at the following events:
1. After a specified period of idle time (no screen tapping or touching the keyboard).
2. After the device has waken up.
3. During a call ("In-Call Locking" Partial or Full).
4. Gesture Left or Right to unlock
WM6.5 SmartLock
1 WM 6.5 use new lockscreen . gray when in wm6.1 or older
2 lockscreen when startup
3 lockscreen when standy
it works well after reboot.

Auto Lock v6.06 (CSDEVCTRL) looks very nice... many options in setup as
executing application after unlock (with command line parameters), locking keyboard, unlocking while slide-out (for raphael i guess), setting right sip, flashing, vibra, etc. ... rly Nice...
but for me LockMeLite is better... (with build in - slide 2 answer option while ringing) cheers
thanks for upload... !

lucasjohny You're the best! Thx. for find this apps.

Hi,
please can you tell me what im ment to do with this?
do i need to install the cabs from the 2 links or just the autolock cab?
Thanks in advance
MG

I'd follow the links to the main thread as both of these apps are on XDA and both have been updated significantly since the OP started the thread.
There are also much more in depth descriptions.
The attached cab files are also outdated. Don't use either of them if you want the latest/greatest.

very nice app!!! I have wanted this for a long time

http://thewingster.com/smartlock.aspx

Thank you very much

I'm wondering whether I can disable the tiny and short sound when I receive a call during the device is locked and turned to silent or vibrate mode? I don't want to disable all sounds of this app, but just this because when the device is turned to silent, it shouldn't make any sounds, should it?
The lock sound is off when I turn the device to silent mode.

harky said:
http://thewingster.com/smartlock.aspx
Click to expand...
Click to collapse
super! thks bro

[REQ] WM 6.5 lock slider

Hi everyone!
can someone change WM 6.5 lock, so when I slide it to left it opens start menu and when i slide it to right it opens home screen, or tell me how to do it?
does something like that already exist?
thanks for reply!

I see there is no interest in this thread...

i did not heard about it yet...

Don't know if it's possible without the lock API opened up.

blaz.andrejcic said:
Hi everyone!
can someone change WM 6.5 lock, so when I slide it to left it opens start menu and when i slide it to right it opens home screen, or tell me how to do it?
does something like that already exist?
thanks for reply!
Click to expand...
Click to collapse
its has something to do with the CPR of the lockscreen

xda2_haseeb said:
its has something to do with the CPR of the lockscreen
Click to expand...
Click to collapse
can you tell me exactly which file do I need to edit?
I'll try to do it myself...I know basics of programing (finished 4 years of computer science school)

\Windows\LS_LockScene_480x640.cpr
(the filename depends of course on your screens' resolution)
I'm going to look into it myself.

Double LockScreen Issue with S2U2 - SOLVED

People I am at loss. I have been trying to find the menu item to completely disable any default lockscreen in WinMo 6.5 on the LEO (Dutch version)
Problem is that S2u2 works fine, but when slidiing to unlock, the"default
WinMo lock screen is also present. I want it out, dead, obliterated!
However, searching through the menu's (anyone building a 6.1 WinMo rom?)
I couldn't find the correct place to do so.
Any help greatly appreciated. I've searched the forum at Modaco and also here, but the tips point to menu's that do not exist in my version.

i had the same issue so i have uninstalled s2u2 until someone knows the registry tweak to disable auto lock for windows screen lock.

Look in the stickies. I think it's hack 27...

The registry line from hack #27 isn't exist in my HD2 (ROM limitation?!)...

Did you try simply adding it?

Hmmm... Interesting...
Tried and it works - thanks !

You're most welcome!

Yes, I downloaded that cab a while ago but forgot to update this post - SOLVED

Hi at all,
i have the same problem with my HD2 (Leo), that I have a double Lockscreen. One from S2Us and one from Win Mobile. I Have installed S2Us 2.30 and also the Disable Auto Device Lock.cab
First it worked and only the S2U2 Lockscreen was there.
Then after a Softreset the Win Mobile Lockscreen was back and I don`t know how I can switch it off.
In the registry the value DeviceLockWhenSuspend is 0.
I hope you can help me.

Im using S2U2 2.34 and has installed the .cab for post #27, and the registrykey i set to 0. But when i shake my HD2 the Windows Lock screen locks the phone.
I have disabled the Windows lock screen in sS2U2 settings.
Any ideas solve the problem?

AnGo76 said:
Hi at all,
i have the same problem with my HD2 (Leo), that I have a double Lockscreen. One from S2Us and one from Win Mobile. I Have installed S2Us 2.30 and also the Disable Auto Device Lock.cab
First it worked and only the S2U2 Lockscreen was there.
Then after a Softreset the Win Mobile Lockscreen was back and I don`t know how I can switch it off.
In the registry the value DeviceLockWhenSuspend is 0.
I hope you can help me.
Click to expand...
Click to collapse
Got the same problem, don't know what to do, any solutions here?? Thanks

the_onstone said:
Got the same problem, don't know what to do, any solutions here?? Thanks
Click to expand...
Click to collapse
This solution works for Pocketshield, maybe also for s2u2
http://jdbp.mobi/phorum/read.php?2,10361,10509#msg-10509

jkolner said:
im using s2u2 2.34 and has installed the .cab for post #27, and the registrykey i set to 0. But when i shake my hd2 the windows lock screen locks the phone.
I have disabled the windows lock screen in ss2u2 settings.
Any ideas solve the problem?
Click to expand...
Click to collapse
i have the same friggin problem, this is what is happenning to me too, please someone help!!!! Asap!!!

Need help with original WM6.5 lock screen resources

Dear all,
I installed Dusk 6.5 Lockscreen 6.5 but after a while I decided to go back to standard WM6.5 lock screen (the "new" one, with the slider). After uninstalling the Dusk Lockscreen, I cannot get the original Windows lock back. No matter what I set in Settings/Lock/Display, I have the "old & ugly" lock with left soft key.
Can anyone send me or post here the original HTC_LS_LockScene480x800.cpr, HTC_LS_LockScene_800x480.cpr, LS_LockScene480x800.cpr, LS_LockScene_800x480.cpr and all related registry entries for the Windows Lock application?
Many thanks,
Radu

yeah that would be great. i need this, too

Ditto - can't get the original slide to unlock method back either. =(

That's because what you are looking at IS the HTC lockscreen and yes it's mega ugly.
The one you want is the WM/WP lock screen and it is a pain to restore. But here is how you do it:
1. Delete the entire Key: HKLM\Security\Shell\Lock
2. In HKLM\Software\Microsoft\Shell\LockScreen\* (SMS,EMAIL, etc)
2.1 Delete each entry for "application command line"
3. HKLM\Software\Microsoft\Shell\LockScreen\Notificat ions\SliderFocus, SliderNotif and SliderNotifFocus edited the value to remove 'htc_'
4. Install TPC default_lockscreeen_enable.cab
5. Soft reset
This will get you back to the default Windows screen with the roundish keys and the three radio buttons (unlock, contacts, email).
Hopefully that is what you were looking for.
Credit for this goes to TwoPumpChump (TPC) he found it for me.
Russ

thanks a lot

Appointments on the Lockscreen

Hi
Are there any options to show more appointments on the lockscreen than ONE?
One event is a little bit less for a good overview.
Thanks for help.

Hi!
I don't know much about WM 6.5 default lock screen. But I use S2U2 and you can configure it to show several (I guess it's up to 7) appointments in its lock screen.

i mean the HTC Sence Lockscreen:
http://www.tracyandmatt.co.uk/blogs...ivewriter/htchd2review_b4f2/lock-screen_4.jpg
regards

cms said:
i mean the HTC Sence Lockscreen:
http://www.tracyandmatt.co.uk/blogs...ivewriter/htchd2review_b4f2/lock-screen_4.jpg
regards
Click to expand...
Click to collapse
They know what you mean, which is why they suggested slide2unlock. It's a replacement for the WINDOWS lock screen (not HTC), that does what you ask.

Just to check whether anyone tested the Slide2Unlock application on WM.5 or HD2?
I try to do a search in this forum but it seems that only the old version is available and nobody is developing that application anymore.

chongbh said:
Just to check whether anyone tested the Slide2Unlock application on WM.5 or HD2?
I try to do a search in this forum but it seems that only the old version is available and nobody is developing that application anymore.
Click to expand...
Click to collapse
Err, not true. The thread you want is in the Development & Hacking Forum. To download you need to access AC's website (the author) which is one of the download links within the relevant thread.
WB

wacky.banana said:
Err, not true. The thread you want is in the Development & Hacking Forum. To download you need to access AC's website (the author) which is one of the download links within the relevant thread.
WB
Click to expand...
Click to collapse
My friend told me that he saw some of the HTC Device using the WM6.5 have a better unlock screen than the HD2 or Leo which will show the Number of SMS and Missed Calls details on the lock screen instead of the numbering on the lock button.

Managed to find this program to replace the stock lock and unlock screen, you can display number of SMS, MMS, Emails or Missed Calls instead of the number beside the Lock Icon.
http://www.ac-s2.com/

well, s2u2 is nice for XDA Herald, but not for the HD2.
The standard-lockscreen on the HD2 is much pretty nicer than the s2u2 for me.
are there no reg-hacks on xda-developers???

I totally agree with cms. The windows mobile lockscreen is excellent but it only shows one damn appointment! Surely this has got to be possible?

airmax95 said:
I totally agree with cms. The windows mobile lockscreen is excellent but it only shows one damn appointment! Surely this has got to be possible?
Click to expand...
Click to collapse
Yeah, I too like the standard lock screen, would be nice if it showed more appointments though.
Not keen on installing S2U2.

Would be amazing if someone modded the lock screen.

I installed S2U2 on my HD2 and agreed on most of the comments. The standard lock screen looks better but is too basic. The S2U2 has all the info I needed but I cannot get rid of the standard windows one so I ended up having 2 unlock screen now which is annoying. Does anyone know how to disable the standard one?

veej said:
I installed S2U2 on my HD2 and agreed on most of the comments. The standard lock screen looks better but is too basic. The S2U2 has all the info I needed but I cannot get rid of the standard windows one so I ended up having 2 unlock screen now which is annoying. Does anyone know how to disable the standard one?
Click to expand...
Click to collapse
BSB Tweaks does that.
Or Settings>Security>block phone> untick block screen.
But in my opinion s2u2 is better, it shows the sms, mms, email, and tasks that original htc dont
regards

Just as a matter of interest, do you guys who say you don't like S2U2 know you can customise it by putting in your own wallpapers and/or gifs? You can even have the wallpaper change at regular intervals, giving you a fresh look whenever you wish.
So what you can do, if you wish, is to have a wallpaper that closely resembles the standard lock's wallpaper but sat in S2U2. You then get a better lock application with the look you are after.
WB
PS: If you knew all this but still like the standard item then ignore me.

I like the standard lock screen and would very much like more than 1 appt to be shown. I have tried S2u2 but i find it a bit bloated now, it is very capable and works but i just find it too big/bloated.
Is there a way we could tweak the MS lock screen?

toyjeep said:
BSB Tweaks does that.
Or Settings>Security>block phone> untick block screen.
But in my opinion s2u2 is better, it shows the sms, mms, email, and tasks that original htc dont
regards
Click to expand...
Click to collapse
Thanks. Interestingly I cannot find the block phone function under Security so I disable it through S2U2.

As it happens I was also fiddling with the latest version of S2U2 yesterday evening. Hadn't used it since I had my TP.
I'm running XannyTech's latest rom and when I use S2U2 as a replacement for the win6.5 lock, my Manila sliding tabs on the bottom slide behind the bottom bar where the softkeys are displayed on.
Anybody seen this before? I seem to remember that there was a little program to correct that but can't find it back.
Tried fiddling with S2U2' settings but disabling bottom and top bar did not help either.
if anybody knows how to correct that, would be great to hear.
ps: when uninstalling S2U2 and soft reset puts the manila sliding tabs back where they should be...
DicE

S2U2 is definitely the way to go if you want to configure the lockscreen to add more calendar entries. But I never got the hang of using the alert bubbles sitting in the bottom right corner of the screen as they were too hard to press with my thumb, one-handed.
I posted in the S2U2 thread about this but the suggestion there was to go back to the original WM lockscreen. Which I did.

I too prefer the standard Lock screen except would love it to show more Calendar items and perhaps Birthdays. The configure page is really limited but better this than someting too bloated for a lock screen.