Hi,
i don't know wht happen. After I have flash cook rom, my screen look strange after i reboot it.
But it becomes normal after i press the power button and on it again.....
No peoblem in flashing stock rom......
IT's so strange........
(Flash ROM using USPL 2.5)
Are you sure your phone is an original HTC Touch HD device? There are lots of good copies of this phone in Asia which I have seen with similar problems when flashed with non stock roms.
stuntdouble said:
Are you sure your phone is an original HTC Touch HD device? There are lots of good copies of this phone in Asia which I have seen with similar problems when flashed with non stock roms.
Click to expand...
Click to collapse
Ha Ha Ha Ha Ha.......
I bought it from HTC and it is normal when i flash the stock rom
is it because i am using USPL???
FWIW mine did the same after flasing EnergyRom the other day. It's a T8285 that's Telstra branded. No problem once I turn the screen on and off but it was a bit unsettling.
You need to have your SPL (bootloader) to 1.56. Something in the initialization of the palette changed about a year ago in the various MS ROM updates.
I seem to recall the way to upgrade (for stock SPL, you can also go with custom HSPL) is by simply applying the most recent factory ROM update.
So, if you went from (old) stock ROM to a custom ROM, you would see this. If next you go from custom ROM to a new stock ROM and then back to the custom ROM, the problem is gone.
Or thats how I recall this, it has been a year since I had this problem.
If you already have newer SPL, then I do not know what the problem is.
You need to have your SPL (bootloader) to 1.56. Something in the initialization of the palette changed about a year ago in the various MS ROM updates.
I seem to recall the way to upgrade (for stock SPL, you can also go with custom HSPL) is by simply applying the most recent factory ROM update.
So, if you went from (old) stock ROM to a custom ROM, you would see this. If next you go from custom ROM to a new stock ROM and then back to the custom ROM, the problem is gone.
Or thats how I recall this, it has been a year since I had this problem.
If you already have newer SPL, then I do not know what the problem is.
Click to expand...
Click to collapse
thaank you!! You are right! it is normal now. thanks maybe this issue should post it in wiki.
Related
Hi guys,
this is my first post in this forum.
A couple of days I've already been browsing through the forums and the wiki, and now I have a few simple questions regarding flashing of roms.
I'm the owner of a BLAC100 in the O2 Germany version (Rom:1.14.207.2 (241011) GER, Radio: 1.09.25.14)
As O2 has not (yet) offered their version of the 1.56.407.2 Rom I was thinking of flashing the generic version using USPL.
Ultimately I'm hoping to run a fully working Android on the device, but till then I'll probably have to wait a little longer.
Is it possible after flashing a different rom to completely restore the device to factory settings? (Is there a rom available?)
What happens to the software installed on SD?
I guess I'll have to reinstall that too?
THX in advance,
Kayoz
Welcome to the forum!
I assume the BLAC100 is the Blackstone?
I also have the touch hd originally from O2 Germany.
If you want to flash a new ROM, but you still want to keep the original SPL, then don't install an HSPL, but instead use USPL. Of course, if you were to use HSPL, you could always go back and put the original SPL for warranty purposes. It's really up to you. I've always only used USPL.
If one day you want your original stock ROM, then download it from this list here.
Wiki: Stock ROMs
Just scroll down to the Germany section, and pick the one that applies to you.
There are some great instructions on flashing ROMs here.
Follow them closely - especially if you want to flash a 1.56 ROM - you'll need to first update your SPL/HSPL/USPL to a 1.56 version. It is all explained in that tutorial.
I use Dutty's 3.7 XT ROM and it's great. I have used his ROMs since v2.1.
When you flash a new ROM, you'll most likely need to install the programs on your SD card again (at least - I have always had to). You can use a program like spb Backup to make an image of your device after you are done installing all your programs and adjusting all your settings. If you have to hard-reset, you can just restore that backup file and in no time you'll have all your programs back. However, if you flash a different ROM, that backup file will likely not work with it.
restore the device to factory settings == the rom you flashed's factory settings
there is no behind the screen rom you can always revert to after you flash your device
if change the rom you change the rom
only way to go back to how your phone was bought is to flash it again
with the rom version it came with like you would any other rom
Thanks for the quick replys!
Chris Cross said:
Welcome to the forum!
I assume the BLAC100 is the Blackstone?
Click to expand...
Click to collapse
yes indeed.
I also have the touch hd originally from O2 Germany.
If you want to flash a new ROM, but you still want to keep the original SPL, then don't install an HSPL, but instead use USPL. Of course, if you were to use HSPL, you could always go back and put the original SPL for warranty purposes. It's really up to you. I've always only used USPL.
Click to expand...
Click to collapse
As I already mentioned I was thinking of using USPL, but here comes one more question will i have to replace SPL with the newer SPL to install the latest roms?
Is it possible to do that using USPL and is it possible to revert back to the original SPL
If one day you want your original stock ROM, then download it from this list here.
Wiki: Stock ROMs
Just scroll down to the Germany section, and pick the one that applies to you.
Click to expand...
Click to collapse
There seem to be 3 different O2 roms (all of them appear to be homemade) which is the right one/what are the differences?
Or is it possible to create an image of the rom i have on the device atm, and revert back to that later?
There are some great instructions on flashing ROMs here.
Follow them closely - especially if you want to flash a 1.56 ROM - you'll need to first update your SPL/HSPL/USPL to a 1.56 version. It is all explained in that tutorial.
I use Dutty's 3.7 XT ROM and it's great. I have used his ROMs since v2.1.
Click to expand...
Click to collapse
I'll have to read some more into cooked roms and their pros and cons, for now i think i want to stick to the stock roms (just to get the feeling for successful flashing...)
When you flash a new ROM, you'll most likely need to install the programs on your SD card again (at least - I have always had to). You can use a program like spb Backup to make an image of your device after you are done installing all your programs and adjusting all your settings. If you have to hard-reset, you can just restore that backup file and in no time you'll have all your programs back. However, if you flash a different ROM, that backup file will likely not work with it.
Click to expand...
Click to collapse
That's what I thought.
Thanks again
As I already mentioned I was thinking of using USPL, but here comes one more question will i have to replace SPL with the newer SPL to install the latest roms?
Click to expand...
Click to collapse
yes, you need to go from 1.14 to 1.56 if you want a new ROM based on 1.56
Is it possible to do that using USPL
Click to expand...
Click to collapse
yes. I did it and I have never used HSPL. I just followed the instructions in that tutorial link.
and is it possible to revert back to the original SPL
Click to expand...
Click to collapse
as far as I know - yes.
There seem to be 3 different O2 roms (all of them appear to be homemade) which is the right one/what are the differences?
Click to expand...
Click to collapse
Correction: Hmm, I just looked into it. Some do seem to be "homemade" or altered roms. (for example see this discussion). Thanks for pointing it out. I was under the impression they were 100% original stock roms.
I can't tell you what the differences are. It looks like the O2 roms are all the same. This table shows you the various stock roms in each country (scroll down). There it only shows O2 germany as having ROM 1.14.207.2(24011)
Correction: (old info erased) My original O2 rom was 1.14.207.2(24011). The 1.14.407.3 was once I flashed later.
Check your phone right now. Go to settings, system tab, device information and look and see what version it says you have. You can also look at the red numbers when you start your phone. Write those down, as they say your ROM and radio info etc...
Or is it possible to create an image of the rom i have on the device atm, and revert back to that later?
Click to expand...
Click to collapse
Making an "image" doesn't mean you are saving the whole ROM. I'm not a cook, so I can't tell you how you could do that. But maybe these links will help:
Instructions 1
Solution to one possible error
I'll have to read some more into cooked roms and their pros and cons, for now i think i want to stick to the stock roms (just to get the feeling for successful flashing...)
Click to expand...
Click to collapse
I had my stock ROM for several weeks. And once I flashed Dutty's ROMs I never went back. I use his latest ROM right now (3.7 XT).
I made quite a few changes to my previous post, so you might want to read it again. I had some mistakes in there. I also included some new links with info if you are interested in backing up your current "true" stock rom. It would be really helpful for the rest of us too, since apparently the "stock" roms provided in the wiki are not 100% stock. I don't know if the altered stock roms in the wiki would be recognized as such and therefore void the warranty.
Chris Cross said:
Check your phone right now. Go to settings, system tab, device information and look and see what version it says you have. You can also look at the red numbers when you start your phone. Write those down, as they say your ROM and radio info etc...
Click to expand...
Click to collapse
As I already mentioned in my first post these are my versions:
Rom:1.14.207.2 (241011) GER, Radio: 1.09.25.14
Making an "image" doesn't mean you are saving the whole ROM. I'm not a cook, so I can't tell you how you could do that.
Click to expand...
Click to collapse
In my understanding making an image of the rom (dumping the rom) is basically saving all the contents of the rom.
If not please tell me what would be missing.
I had my stock ROM for several weeks. And once I flashed Dutty's ROMs I never went back. I use his latest ROM right now (3.7 XT).
Click to expand...
Click to collapse
Maybe you can point me to some page with more info on that rom and what makes it differ from the stock rom(s).
thx, kayoz
In my understanding making an image of the rom (dumping the rom) is basically saving all the contents of the rom.
If not please tell me what would be missing.
Click to expand...
Click to collapse
Yes, I believe you are right, but I am not sure if there are any hidden files or boot files that you need to make sure are included in there. And then, once you dump it, you have to make it "installable". My knowledge is not good in that area, so I don't want to give you information that could be wrong or misleading.
The best thing would be to post a thread in the Blackstone ROM Development forum.
Maybe you can point me to some page with more info on that rom and what makes it differ from the stock rom(s).
Click to expand...
Click to collapse
Here is a link to Dutty's latest ROM for WM 6.1
It is faster and more user friendly and nicer design than my original stock ROM. It also has the new Manila version with the new contact cards etc... You can also use Manila in portrait or landscape mode.
It has extra useful apps without making the ROM a big bloat.
Check out the thread for details.
EDIT::::::::::::::::::::::
Here is a thread devoted to ROM extraction and creation.
:::::::::::::::::::::::::::::
ok, so I've read some more material and successfully dumped my rom, now working on reconstructing it so it can be flashed back onto the device.
I also did (my first) hard reset and I noticed after the hard reset the protocol version of the device changed from:
52.49a.25.26U
to:
52.49a.25.26H
anyone knows what that means?
kayoz said:
ok, so I've read some more material and successfully dumped my rom, now working on reconstructing it so it can be flashed back onto the device.
I also did (my first) hard reset and I noticed after the hard reset the protocol version of the device changed from:
52.49a.25.26U
to:
52.49a.25.26H
anyone knows what that means?
Click to expand...
Click to collapse
Cool! Great to hear. It looks like we might now have a true 100% stock ROM for O2 Germany. (Assuming you'll share it with us )
Unfortunately I don't know the difference in protocols. Maybe someone else can help.
So, I've been playing around those last couple of days trying to reconstruct my rom.
I've been unsuccessful so far. When I'm trying to do nbsplit on a stock rom and then run imgfsfromnb on the payload i always end up with an empty imgfs.bin.
I also tried using Part02.raw as imgfs.bin directly then it only tells me not to use the created imgfs-new.bin.
anyone might know what i could be doing wrong?
kayoz said:
So, I've been playing around those last couple of days trying to reconstruct my rom.
I've been unsuccessful so far. When I'm trying to do nbsplit on a stock rom and then run imgfsfromnb on the payload i always end up with an empty imgfs.bin.
I also tried using Part02.raw as imgfs.bin directly then it only tells me not to use the created imgfs-new.bin.
anyone might know what i could be doing wrong?
Click to expand...
Click to collapse
Kayoz,
I was wondering, were you ever able to reconstruct your ROM?
Im looking to flash a different ROM onto my phone, but I am unwilling until I have a copy of my current ROM on my THD.
Does anyone know if it matters if two ROMs are identical in all aspects except for the protocol versions?
My ROM comes with
ROM version: 1.18.707.3 (23358) WWE
ROM date: 12/10/08
Radio version: 1.09.25.14
Protocol version: 52.49a.25.26W
Click to expand...
Click to collapse
But the closest that I was able to find was the RUU_BlackStone_hTC_Asia_WWE_1.18.707.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe which has a slightly different protocol.
Cheers.
I wasn't sure if this should go under Rom Development, as it doesn't really relate a cooked ROM.
For a number of reasons, I'd like to load the stock HTC ROM onto my HD. I really appreciate the work that is done by the cooks here but I feel that a lot of the focus is on ROMs that include the latest and greatest functionality (imported from other devices, like the HD2), and I'd rather run the HD with the software that it was designed to run (6.1, TF3D HD (not sense), etc.) so that I know I can rely on everything to function correctly. I'll probably go back to the cooked ROMs eventually, just have different needs right now.
Long story short, is there a way to load the latest stock HTC ROM without removing the current radio I have on my device (1.17 I believe)? Would I need to use a "dumped" version of the ROM, if so, where could I find such a thing?
Also, my device is already security unlocked, etc. I don't want to undo that.
gsvnet said:
I wasn't sure if this should go under Rom Development, as it doesn't really relate a cooked ROM.
For a number of reasons, I'd like to load the stock HTC ROM onto my HD. I really appreciate the work that is done by the cooks here but I feel that a lot of the focus is on ROMs that include the latest and greatest functionality (imported from other devices, like the HD2), and I'd rather run the HD with the software that it was designed to run (6.1, TF3D HD (not sense), etc.) so that I know I can rely on everything to function correctly. I'll probably go back to the cooked ROMs eventually, just have different needs right now.
Long story short, is there a way to load the latest stock HTC ROM without removing the current radio I have on my device (1.17 I believe)? Would I need to use a "dumped" version of the ROM, if so, where could I find such a thing?
Also, my device is already security unlocked, etc. I don't want to undo that.
Click to expand...
Click to collapse
You dont need to revert to stock radio or spl you know just to use a stock rom, you only really need to do that if your sending ur device back under warranty, your best bet is to go to the htc e-club and download the latest us stock rom, and just flash it as normal
mancsoulja said:
You dont need to revert to stock radio or spl you know just to use a stock rom, you only really need to do that if your sending ur device back under warranty, your best bet is to go to the htc e-club and download the latest us stock rom, and just flash it as normal
Click to expand...
Click to collapse
Right, but wouldn't loading the stock ROM (shipped) from HTC overwrite the current SPL and radio with the defaults?
gsvnet said:
Right, but wouldn't loading the stock ROM (shipped) from HTC overwrite the current SPL and radio with the defaults?
Click to expand...
Click to collapse
nah it wont, you can always flash them back afterwards if you want,
I upgrade the ROM fairly frequently on my Blackstone, usually with the latest Dutty release. This was fine up til yesterday. I installed Dutty's Holy Grail R0 ROM, and after installation, after about an hour, the device completely locked up. I pressed the reset button, and the device Hard-resetted, removing everything and going back through the setup screens. This happened a couple of times, so last night I put on a different ROM, Dutty's WM6.5 R15. The device locked up after about an hour, and wouldn't get past the "smart mobility" screen when restarted. This morning I loaded the stock (Orange UK) ROM back onto the device. I haven't had the chance to check if this problem will re-occur, but when I turn on the phone the colours are flipped (putting it to sleep and turning it on again fix this problem, but on a soft-reset it happens again). Seems I can't get anything right at the moment, can anyone suggest what might be up? Tech specs below:
UK Touch HD on Orange
USPL - used exactly as per the Dummies Guide.
Using Win7 x64 (yes, I've got the drivers installed correctly for USPL)
ROMs mentioned in post:
Dutty's Holy Grail R0
Dutty's W6.5 R15
I suppose you didn't install the stock ROM prior to installing the Dutty ROM. You MUST flash a stock ROM before you flash a home cooked ROM, since they work a bit differently when it comes to erasing data. USPL doesn't seem to be the best way either. I had similar problems like you when I used USPL.
So try the following:
Flash your SPL to OliNex
Flash your device with a stock ROM
Use HSPL to flash the Dutty ROM of choice
Ogredani said:
I suppose you didn't install the stock ROM prior to installing the Dutty ROM. You MUST flash a stock ROM before you flash a home cooked ROM, since they work a bit differently when it comes to erasing data. USPL doesn't seem to be the best way either. I had similar problems like you when I used USPL.
So try the following:
Flash your SPL to OliNex
Flash your device with a stock ROM
Use HSPL to flash the Dutty ROM of choice
Click to expand...
Click to collapse
not sure where you got your info, but, you DO NOT have to flash a stock ROM before flashing a cooked ROM. if you're having issues, they could be solved by flashing a STOCK rom. i'm sure i've flashed my HD over 60+ times and never flashed a stock ROM before doing so. i have not had any issues at all. in the original poster's case, it could be that the STOCK ROM he flashed requires an older SPL.
not sure where you got your info, but, you DO NOT have to flash a stock ROM before flashing a cooked ROM. if you're having issues, they could be solved by flashing a STOCK rom. i'm sure i've flashed my HD over 60+ times and never flashed a stock ROM before doing so. i have not had any issues at all. in the original poster's case, it could be that the STOCK ROM he flashed requires an older SPL.
Click to expand...
Click to collapse
Could it be the SPL? Does USPL work with every ROM? The confusing thing is having flashed a stock ROM (the Orange UK ROM), while the device seems fine (apart from having to use 6.1!) it does suffer from the bizarre colour problem while starting up. If I were to flash the SPL to HardSPL, would I be able to undo this? I don't really want to get the phone to a state where I can't return it to the stock ROM/SPL if I need to return it.
cortez.i said:
not sure where you got your info, but, you DO NOT have to flash a stock ROM before flashing a cooked ROM. if you're having issues, they could be solved by flashing a STOCK rom. i'm sure i've flashed my HD over 60+ times and never flashed a stock ROM before doing so. i have not had any issues at all. in the original poster's case, it could be that the STOCK ROM he flashed requires an older SPL.
Click to expand...
Click to collapse
lol i was gunna say exactly the same thing
fredley said:
Could it be the SPL? Does USPL work with every ROM? The confusing thing is having flashed a stock ROM (the Orange UK ROM), while the device seems fine (apart from having to use 6.1!) it does suffer from the bizarre colour problem while starting up. If I were to flash the SPL to HardSPL, would I be able to undo this? I don't really want to get the phone to a state where I can't return it to the stock ROM/SPL if I need to return it.
Click to expand...
Click to collapse
maybe you should try hspl rather than uspl, its a lot easer and more convient, and its eaaasy to go bk to your original spl if you need to
cortez.i said:
not sure where you got your info, but, you DO NOT have to flash a stock ROM before flashing a cooked ROM. if you're having issues, they could be solved by flashing a STOCK rom. i'm sure i've flashed my HD over 60+ times and never flashed a stock ROM before doing so. i have not had any issues at all. in the original poster's case, it could be that the STOCK ROM he flashed requires an older SPL.
Click to expand...
Click to collapse
Just sharing the experience from myself and several users at HTCpedia where flashing a stock ROM first is the general recommendation. You might have made it just fine with your HD without a "stock flash", but you may have different set-up of your phone (SPL, ROMs) than others. That's why I say play it safe and install the (latest) stock ROM and HSPL-OliNex. Seems to work for more or less everyone.
However, I agree that there is no definitive explanation to why you should flash the stock ROM, but it seems as if the flashing procedure of a stock ROM resets the memory completely, where a cooked ROM flash does not. Note that this well may be an issue with the wrapper and not the ROM, but that's another story.
Ogredani said:
Just sharing the experience from myself and several users at HTCpedia where flashing a stock ROM first is the general recommendation. You might have made it just fine with your HD without a "stock flash", but you may have different set-up of your phone (SPL, ROMs) than others. That's why I say play it safe and install the (latest) stock ROM and HSPL-OliNex. Seems to work for more or less everyone.
However, I agree that there is no definitive explanation to why you should flash the stock ROM, but it seems as if the flashing procedure of a stock ROM resets the memory completely, where a cooked ROM flash does not. Note that this well may be an issue with the wrapper and not the ROM, but that's another story.
Click to expand...
Click to collapse
The best thing to do is use mtty to completely format your device and totaly remove the current os and any defragmented parts of older roms left in the memory blocks before flashing a new rom
Ogredani said:
Just sharing the experience from myself and several users at HTCpedia where flashing a stock ROM first is the general recommendation. You might have made it just fine with your HD without a "stock flash", but you may have different set-up of your phone (SPL, ROMs) than others. That's why I say play it safe and install the (latest) stock ROM and HSPL-OliNex. Seems to work for more or less everyone.
However, I agree that there is no definitive explanation to why you should flash the stock ROM, but it seems as if the flashing procedure of a stock ROM resets the memory completely, where a cooked ROM flash does not. Note that this well may be an issue with the wrapper and not the ROM, but that's another story.
Click to expand...
Click to collapse
Think someone in HTCPedia was playing if safe by suggesting users flash stock rom before flashing cooked rom. Like cortez.i said above you DO NOT need to flash a stock ROM before flashing a cooked ROM. Some poeple occasionally experience issues with cooked roms and a solution can be to flash a stock rom. But like cortez.i I've flashed well over 200+ times and never flashed a stock ROM before doing so and I've never had an issue. It may be inexperienced users are doing something different which causes these issues or haven't followed the flashing process properly.
Ok, I did use the search feature and I did find information but I just want to verify that it is correct. From what I seen to update from a Custom ROM with HSPL to the Official 2.13 Update you have to do the following:
1. Flash the 2.13 Update
2. Run HSPL again but this time select (in my case) 2.08.00 instead of 2.08.00 HSPL which should flash the stock SPL onto the phone.
Is this correct? Just want to verify as I dont want to brick my HD2.
Thanks,
Mike
correct
.......
Thanks for verifying that.
if thatsvthe update from tmobile i advise against it. it messed with my sensitivity and took me a few days of work to go back to the 2.10 ROM version
Let me ask you this though, did you do a hard reset before flashing the update, as well as after flashing the update? If you did this it shouldn't have any bad effects on it. Ive heard no others say they have had this issue. Ill let you know if I have this kind of issue though. What exactly was it doing?
ssconceptz said:
Let me ask you this though, did you do a hard reset before flashing the update, as well as after flashing the update? If you did this it shouldn't have any bad effects on it. Ive heard no others say they have had this issue. Ill let you know if I have this kind of issue though. What exactly was it doing?
Click to expand...
Click to collapse
That is most definitely a wise practice when flashing ROM's...however, there are indeed quite a few users reporting sensitivity issues after flashing to the new 2.13...there's changes in the new ROM intended to improve sensitivity, but the effects aren't always desirable it seems.
Some serious efforts are underway here to get around that, you can keep up with them at the following thread (which is also a sticky at the top of this forum section):
http://forum.xda-developers.com/showthread.php?t=683192
Or......
1. Use an extrator program on the .exe file and then you will find that the 2.13 update has 11 files. (rename the .exe to .rar)
2. Run a Task29
3. After the 11 files are extracted you can just use the romupdate utility, and presto stock 2.13 without messing with HSPL
These steps will not overwrite the HSPL to 2.10 and if you decide to go to another custom ROM then you are good to go.
It also works the same with the 2.10 stock ROM
I had a custom went to the new tmous official and went back to a custom without having to redo Hspl.
well I just heard that the HSPL gives problems with 2.13 and you need to use the factory SPL
uhmm.... i'm using smaberg's touch extreme rom.... which is better? the tmo 2.13 update or the custom rom?
May I ask why would you consider returning to 2.13 after running a perfectly fine Custom ROM? Well, besides selling or trying to return the phone to T-Mobile... 2.13 gave me nothing but problems and freezing left and right. The music app in 2.13 took 1 minute and 25 seconds to load the songs !!!!
2.13 is the latest right? even the new custom roms are 2.13 based right? or that's old?
matyoka said:
May I ask why would you consider returning to 2.13 after running a perfectly fine Custom ROM? Well, besides selling or trying to return the phone to T-Mobile... 2.13 gave me nothing but problems and freezing left and right. The music app in 2.13 took 1 minute and 25 seconds to load the songs !!!!
Click to expand...
Click to collapse
Something is definitely wrong with your HD2. I have the latest rom and it's just as stable as the previous versions. Using Garmin Mobile XT GPS and SportyPal along with G-Alarm very frequently with no hiccups.
You sir suck at HD2.
Appreciate your response, even though it had nothing to do with you. On a second note, I'd rather suck at HD2 than suck something else... something you are very familiar with.
Hi there,
Im very new here. I have a T-Mobile HTC HD2. Both HTC and WinMO are something new for me, as previously im iPhone user. Any guide/help is very appreciate. The phone keep hanging during boot. Usually its hang during the pink box and when htc sense finish load. How do I fix this?
I would like to install android on this phone. Is it possible for me to install after I update to latest OS(WinMo 6.xxx).
Update:
My HTC HD2 keep freeze during boot. Now I want back to normal, whatever ROM is it.
Welcome to XDA and whole real world as I am sure iPanzy kept you down but thats another matter for another day. Now I am not sure what pink box you are talking about you mean the splash boot? What are you using WM6.5? In that case look below.
Now you have few choice as HD2 is true multi platform device, as we are belessed with superior dev team and support many OS. You can use dual boot WM(NAND) and AOSP(mSD) or you can use NANDROID. If you pick dual boot I say use WM6.5.X as base 29XXX is by far the most superior stable then if you want to use AOSP then download and install Android on SDCard or skip all of that and use NANDROID as native.
Pink box I mean is probably shows "Stick Together" words
Now even worse, after few second the phone boot it freeze. I`ve tried factory reset, the same thing keep happening. What should I do now? Should I flash to new offical ROM/OS?
FYI in using T-Mobile HTC HD2 with 1024MB ROM.
For now let forget installing android on but focus on the freeze.
Thanks for the help STHNS
I know you are using Leo1024 as its TMobile also I had feeling it would be that ugly logo thats why I said splash boot. Which was the first thing I got rid of when I got HD2 and put custom splashscreen.
Now it would be unwise to jump in to Android as you might want to check if your HD2 is functioning properly so later if something does go wrong you can send it back for warranty without issue. So lets be clear what are you saying? You can't load in to your WM6.5? SenseUI never loads? or your stuck at bootscreen? Is it used/new? Where did you get this device?
My phone stuck on 3 difference places. I keep reset so the phone can be use normally. Indeed very few time its successfully boot.
1. Stuck on Pink box logo"Stick Together "
2. Stuck on loading Sense UI
3. Stuck after finish loading Sense UI.
Most of it stuck on 2 or 3.
Well no problem first where did you get this device? I have a feeling its used and you got it though some type of shady deal where original owner gave you talk about blah blah lol thats why he sold it, I could be wrong
But serious matter here shut the HD2 down completely and power it back on. Then report what you see the in steps. Hopefully you got it new if something is wrong due to faulty hardware you can send it for repair or warranty. But I have a feeling you don't thats why you came here :O again I could be wrong I am just always suspicious
Its used and i bought it on eBay.
Btw how could flash to offical ROM?
What rom is on it? And why would you want official rom? If you want WM based rom go use EnergyROM WM6.5.X 29XXX base as its far more stable.
EnergyROM WM6.5
Does the installation is same as official ROM?
To test the phone, I advice to go to the HTC Website and download a ROM (you have to use your phone's serial number to guarantee to get one suitable for your phone). If I remember correctly there are 3 variations: 2.08, 2.10 and 3.14. - go for the 2.10 (just to keep away from the 3.14 version as you want to move onto Android). Flash the ROM.
After a hard reset there should be no problems, if there is then your phone has hardware issues.
Thanks for the info fred.
Where I can download the 2.14 version?
What is shipped ROM?
What the diffence between shipped ROM vs official ROM.
Sorry for a lot questions. HTC and WinMo is something new to me. Im iPhone user.
2.14? You mean 3.14?
1) Shipped rom is the default manufacture rom that comes standard on it.
2) No diff between shipped and official rom they are same thing we call them stock rom. Which is supported and maintained by the folks who made the phone.
If you want to upgrade stock rom not sure why you want to do that you can go to Tmobile website and check under wmupgrade or go to HTC website and look under support. I say you forget about WM 6.5 stock rom and go use WM6.5.X EnergyROM base 29XXX its simply superior in every aspect.
The reason I suggest you flash, for example, the 2.10 ROM is that it will flash the SPL, the main ROM and the RADIO. This will get the phone running fully on an official ROM.
The problem you have can either be modifications to the operating system software or additional software or a hardware problem. By flashing a stock (official) ROM you will have cleared the existing operating system and additional software. Now if the problem is still there then it is very likely that it is due to a hardware problem.
If after flashing the problem is gone, then by all means flash the excellant Energy ROM or flash your desired Android ROM.
If you only flash a custom ROM which does not include the RADIO (which controls all communication interaction and not just the FM Radio) then you are reducing the chances of finding out the problem.
Silly question, have you tried booting the phone up without the SD Card?
After all the problem, freeze, hang up and etc I no longer put any sd card on my htc hd2. I beleive the problem might be with the hardware. But why not we try our best before given up on it.
I had several simple questions.
1. Can radio be downgrade?
2. What radio for? Its same like baseband on iPhone
3. Where I can download 2.10 HTC HD2 US T-Mobile? Search here found nothing
StarScreamx said:
After all the problem, freeze, hang up and etc I no longer put any sd card on my htc hd2. I beleive the problem might be with the hardware. But why not we try our best before given up on it.
I had several simple questions.
1. Can radio be downgrade?
2. What radio for? Its same like baseband on iPhone
3. Where I can download 2.10 HTC HD2 US T-Mobile? Search here found nothing
Click to expand...
Click to collapse
1) Yes you can downgrade Leo_Radio's long as you use the correct one as you know there is .50 for HD2-US(Leo1024) and .51 HD2-EU(Leo512).
2) Radio is software that controls your phones wireless interfaces such as data, voice, bluetooth, gps, wifi and other power and memory related firmwares. Well never used iOS so can't say what they call it but far as AOSP goes yes we call it baseband.
3) Search for TMoUS 2.10 stock rom and you will find it or do search in this forum as I am sure someone has it archived.
3)
Answer to your question No. 1 - Yes, Radio can be downgraded and upgraded if you install HSPL prior to downgrade/upgrade. FOr the rest you have to search the forum for the answer.