G1 Won't Fully Boot - Backlight Only - G1 General

Hey there. I've found some similar threads, but nothing exactly matching this situation, so I thought I'd post:
G1, running Cyanogenmod, though I'm not sure of the version. Latest update notice said there were 11 updates available. ( i know, but i couldn't upgrade my sd card yet)
Issue: Phone was fine, but then battery was accidentally removed while powered on (was cleaning camera lense).
Now, Phone will begin booting, and get to the skateboarding android screen, but after that it will just hang, black screen with backlight on.
Home+Power boot will go to control menu. Power + Camera goes to correct screen, also.
Is there any way to fix other than a restore? I can restore if needed, would just rather not since it's always a bit of a pain to set it back up.
thanks for any info! Other issues like this seemed to be posted in this forum, which is why i chose it. please let me know if it should appear somewhere else.

robsclone said:
Hey there. I've found some similar threads, but nothing exactly matching this situation, so I thought I'd post:
G1, running Cyanogenmod, though I'm not sure of the version. Latest update notice said there were 11 updates available. ( i know, but i couldn't upgrade my sd card yet)
Issue: Phone was fine, but then battery was accidentally removed while powered on (was cleaning camera lense).
Now, Phone will begin booting, and get to the skateboarding android screen, but after that it will just hang, black screen with backlight on.
Home+Power boot will go to control menu. Power + Camera goes to correct screen, also.
Is there any way to fix other than a restore? I can restore if needed, would just rather not since it's always a bit of a pain to set it back up.
thanks for any info! Other issues like this seemed to be posted in this forum, which is why i chose it. please let me know if it should appear somewhere else.
Click to expand...
Click to collapse
just goto recovery "home + end key" and wipe data + cache + ext and reflash everything. or you cant goto console in recovery and try fix_permissions. it might help

thanks for the suggestion! Trying to do the restores and permission fixes, I've realized that the issue was with the SD card. Apparently it's died on me :-/
partitioning a new SD card got the phone to boot again with all my settings intact, but unfortunately none of my apps.
I hear that the common problem with sd cards is the controller stopping working; does anybody know what my options are for trying to recover the data on it?
Thanks again for the help

Related

Infinite Loop

Hey all, first off, sorry if this is the wrong forum. If it is could one of the mods please move it.
OK, here's my issue. I had CyanogenMods latest build, 3.4 I think and decided to try The Dudes cupcake 1.RC1. I forgot to do a wipe before installing TheDudesCupcake but when my phone came up it worked ALMOST fine. Had a crash here and there of something, not sure what, but the phone still worked fine. Today, I had an issue with a video (is the SD Card) not being viewable with "Video Player" so I decided to remove the card and pop it back (hoping this would somehow refresh the player). Didnt unmount it so I got the error about i may loose data without unmounting. (i'd done it before without a problem). Well this time around my card was corrupted so I ended up formatting with the phone. tried going into settings to view the size of the drive not since I didnt know if the whole card was wiped or only the FAT32 partition. Kept getting an error while trying to go into settings so I decided to reboot. After reboot I was able to get into settings and saw the whole card was wiped (back to full 8GB of empty space). Thought I would wipe right there from settings since I was getting an error or 2 after reboots and since I had gotten that error when trying to get into settings and then updating back into Dudes Cupcake. (thought the wipe would get rid of any issues of going between Cyanogen to Dudes Cupcake). Once I clicked on wipe and android reboots, it's trying to do something but just keeps rebooting. I've got Cyanogens restore image v1.2 on. So I see the G1 logo, then comes up
Build CyanogenMod v1.2 + JF
Formatting DATA ....
and at the Formatting DATA part it does the reboot and goes back to the G1 logo and comes back to formatting data and reboot.
I tried doing a HOME + POWER but it just goes back to formatting data. I tried doing a CAMERA + POWER but it goes back to formatting DATA.
Any ideas would be appreciated.
Thanks and sorry for the long post, I just wanted to give all my steps.
Huascar82 said:
Hey all, first off, sorry if this is the wrong forum. If it is could one of the mods please move it.
OK, here's my issue. I had CyanogenMods latest build, 3.4 I think and decided to try The Dudes cupcake 1.RC1. I forgot to do a wipe before installing TheDudesCupcake but when my phone came up it worked ALMOST fine. Had a crash here and there of something, not sure what, but the phone still worked fine. Today, I had an issue with a video (is the SD Card) not being viewable with "Video Player" so I decided to remove the card and pop it back (hoping this would somehow refresh the player). Didnt unmount it so I got the error about i may loose data without unmounting. (i'd done it before without a problem). Well this time around my card was corrupted so I ended up formatting with the phone. tried going into settings to view the size of the drive not since I didnt know if the whole card was wiped or only the FAT32 partition. Kept getting an error while trying to go into settings so I decided to reboot. After reboot I was able to get into settings and saw the whole card was wiped (back to full 8GB of empty space). Thought I would wipe right there from settings since I was getting an error or 2 after reboots and since I had gotten that error when trying to get into settings and then updating back into Dudes Cupcake. (thought the wipe would get rid of any issues of going between Cyanogen to Dudes Cupcake). Once I clicked on wipe and android reboots, it's trying to do something but just keeps rebooting. I've got Cyanogens restore image v1.2 on. So I see the G1 logo, then comes up
Build CyanogenMod v1.2 + JF
Formatting DATA ....
and at the Formatting DATA part it does the reboot and goes back to the G1 logo and comes back to formatting data and reboot.
I tried doing a HOME + POWER but it just goes back to formatting data. I tried doing a CAMERA + POWER but it goes back to formatting DATA.
Any ideas would be appreciated.
Thanks and sorry for the long post, I just wanted to give all my steps.
Click to expand...
Click to collapse
when it says formatting data then done, are you pressing and holding home and back or just pressing and releasing. when the phone is powering on and you hold the home and back keys it will do a hard reset just like a wipe(same thing) or since there is no data to lose any more, try pulling the battery, this will not do any harm as you are not flashing anything
since you have the cyanogen recovery image you should have gone into the console at recovery and typed
fix_permissions.sh or sh fix_permissions.sh
Thanks for the response tubaking. My problem was that it didnt say done. right when the "Formatting Data...." line came up, it reboots, without saying done. And I couldnt get into the Home+Power or the Camera + power screens. Neither one would go there, just back into "Formatting Data:..." screen. After reading half way through the Brick thread I saw someone mention pulling the SIM card out, didnt think that would help but it finally dropped me back into the recovery console. Might I ask why something as simple as removing the SIM drops the loop and takes you to recovery?
thanks.

Did Lag Fix for Galaxy S and now my phone won't boot

Just done the lag fix for my Galaxy S and it all seemed to go through fine. Tried running Quandrant benchmark to test it but it crashed. I turned the phone off and on, got the Galaxy S i9000 screen then is just goes blank, literally nothing, not even the menu or back lights. Had to then take the battery out to reboot but got the same blank screen.
I can boot into recovery but rebooting from that doesn't work either, does anyone know how to fix this? don't want to try anything for fear of making it worse
Thread moved in Galaxy S I9000 General.
Tobert said:
Just done the lag fix for my Galaxy S and it all seemed to go through fine. Tried running Quandrant benchmark to test it but it crashed. I turned the phone off and on, got the Galaxy S i9000 screen then is just goes blank, literally nothing, not even the menu or back lights. Had to then take the battery out to reboot but got the same blank screen.
I can boot into recovery but rebooting from that doesn't work either, does anyone know how to fix this? don't want to try anything for fear of making it worse
Click to expand...
Click to collapse
Try getting into the Recovery Mode with the 3 button combo
instruction on wiki http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/GT-I9000
What lag fix are you using and what firmware are you on?
wont boot..
Hi, strangely but after the 2.2 upgrade on my SGS (it was JF5 and I made the trick with the registry to JPC and upgrade via KIES) it happened to me as well.. just a beautiful "S" blinking on the screen and nothing happens. On the time of upgrade in the instructions it was written that with the 3combo trick to make factory reset.. then everything worked just fine until yesterday...
Without installing any new apps, just browsing and trying to make my AllShare working.. I decided to gave up and without reason I have decided to restart my phone just to free RAM and etc.. And by no reason at all I got the same ****ty "S" screen and no boot.. tried first to wipe the cache.. didn't help.. and just after again factory reset it worked out and the phone is okay...
So probably for you the solution is really only factory reset, however this is very strange behavior
When I first applied the lagfix from the market in apk type it required an auto reboot to see if things wokred ok (as prompted on the screen).
Anyway, my phone stuck to a black screen and I was in a very inconvenient situation not to be able to use a PC (yeah, now I know I shouldn't mess with stuff like that while I'm on-the-go).
Long story short, after a couple of manual reboots (by taking out the battery for some seconds) it came back to life and no problems ever since. So before flashing (which can be rather incovenient if you have no backups etc) try the above mentioned method.
Original JF3 firmware (yeah need to change that).

[Q] eLocity just quit...won't boot up

I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
My a7 was running well for about a week since it quit...but today when I booted up device, it failed to recognize sd card...same card used for updating to mod 1.4...same card I've been using to listen to my music, etc...but now won't recognize...I've tried two different micro sdhc cards..formatted, reformatted, but device continues to display mount sd card...all else works fine! Does anyone have any new ideas? I can't even reinstall mod since a7 can't read my cards. Thanks for any input that would be helpful. I understand these issues are ongoing for many out there...what to do?
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Mine has hung on a black screen on me. Seemed that it didn't fully come out of sleep mode.
I was able to recover by holding the power button for 15 seconds to hard power down. No data loss.
deepmagic said:
I have been running my a7 with dexter's mod 1.4 for about 1 1/2 weeks...everything has gone well. This afternoon I turned on the device and it failed to complete boot. The word Android would come up and then nothing. I tried to reboot, reset, but device would do neither...nor would it turn off completely. I kept trying to take it into recovery mode and then after several tries was able to wipe, do update again, and get everything back as before. What would cause this and should I look for this to happen again? deepmagic
Click to expand...
Click to collapse
Exact same thing happened to me this morning. Tried to reset - not happening. Hard powered down. Don't have time to try anything else right now. I'm new to the forums and new to android. Wish me luck! I've been loving my A7, and much appreciation to Dexter and all the other knowledgeable hackers/modders/posters.
hey the same thing happened 2 me twice. Once the first day after i got it, since i had only had it for 1 day i wiped it reinstalled dexter's mod 1.41 and it worked. First app i installed was backup root. Now, a week later the exact same thing is happening. This time i dont want to wipe it because of all of the apps i have installed, games ive played etc. Any ideas? Could we just try reinstalling dexter's md without wiping? Or wiping reinstalling and recover from a backup?
Also have you installed busybox? I had just installed it both times before it failed to turn on. Maybe its just coincidence but you never know..
-D
Thanks to anyone who can help! and also thanks Dexter for all your hard work as well as everyone else that has contributed to the elocity, im lovin it! (when it works )
success!!!!
I got it to work! I don't have a permanent fix but if it happens again just boot into recovery and reinstall the dexter's mod update 1.41 and it works again! No wiping required. This isn't a permanent fix but it will work until we find one
-Dylan
Hasn't happened to me (yet) but I didn't upgrade to the newest ROM. I'm still using 1.3and it has been very stable. Only issue I've had was when I tried to use Killswitch to go to sleep mode when the cover is shut (great idea) but it didn't work and froze all except the live wallpaper. Weird.
Good luck, guys.
in the event it does happen to you, you might want to check out my apx thread for reflashing the factory firmware if you can't get your tablet unstuck. theres alternatives if you don't want to get stuck again.
The method you outline seems so complex...way above my abilities, but makes me wish I had followed though on some early programming training opportunities. That was the road not travelled.
okantomi; while i wouldn't encourage others to follow thru with procedures they fear would cause more harm, i would mention that if you google up my nick you'll find i've been able to do much w/ android software and devices while not knowing anything about programming. if i can do it, anyone can. i just wanted some themes for my phone.
i'm just an android hobbyist by night (and when i get a chance during the day), and a computer tech by day. no programming expertise, but i can reasonably reverse engineer and port software and components using simple file managers like ztreewin(trialware).
don't be mistaken that the folks out there providing you solutions necessarily know anything about programming or software development. just how to chef up files at different levels. i understand this doesn't go for everybody.
Thanks for the encouragement. I'm impressed with what you've been able to do. It is also nice to read upbeat comments about the A7. There is something sort of special about a device that you really almost have to build yourself... putting so much into it... biting your fingernails to nubs with each ROM flashing. You don't get as attached to any device that is 100 percent complete right out of the box, though of course there would be a lot less aggravation.

Back and Menu button not working after flash

Hoping someone can help me, but after flashing on my i9000m everything seems to work except the back button and menu button. I might have messed up something with touchwiz? But can anyone offer any suggestions on a way to resolve this? When attempting to get to the touchwiz firmware update through phone console nothing seems to happen anymore. Not even sure if this is the cause of the problem really. I have tried flashing a couple different roms (cyanogenmod 9 and 10, aokp) but the back and menu button does not work with any (and worked fine previously with stock). What is interesting is that when a new email or sms is received both buttons light up and remain that way until the message is acknowledged (like the led notification).
I have searched the forums but have not found anything helpful to this issue and was hoping someone could point me in the right direction.
darkparagon said:
hoping someone could point me in the right direction.
Click to expand...
Click to collapse
suggest you revert to stock UGKG3 for i9000M to get things back to normal before trying to upgrade to CM. Do the full wipes before and after flashing
you can get a rescue kit from My Android Collections and or a solution from My Android Solutions
But First powerdown, pull out Battery, SIM CARD, and EXT.SD card, press power button for a minute, than powerup without SIM and Ext.SD Card....Do remember to backup your contacts, data, images etc and also your EFS folder before flashing a ROM and make sure you have more than 50% battery charge before you attempt any sort of flashing.

[Q] [HELP] A very weird problem with X5 Pro

Have searched the forum and couldn't find any discussion about a similar problem to what i'm having with my phone. This is super weird.
I'm on an official B928 rom. It started some time ago. Whenever i reboot my phone it "resets" to a particular state. Which means - everything i do with my phone before a reboot gets reversed back to a particular state at which my phone "froze". If i delete sms, they come back, if i install programs they are gone, if i uninstall programs - they come back and so on..
I've tried to flash B928 and B552, but i always get an error at the second stage (have tried all possible combinations - with/without the battery, formatting the card). Pink screen is blocked - can't unblock it, because my phone deletes the necessary files after reboot. Can't install CWM for the same reason.
Is that it? I'm out of ideas. If anyone can throw any idea at me or direct me in the right direction i would be very grateful.
Thank you
reboot recovery
advance menu
format /data
take a look if it help
I only have the standard recovery, not cwm, it doesn't have advanced menu.
But even if i try the wipes in it, it does nothing, meaning it doesn't even delete my data.
Thanks
I'm having the same issue with my u8800-51. My thread is here http://forum.xda-developers.com/showthread.php?t=2331209 but no suggestions therein have helped, yet.
Ok, i see. I've seen some people restoring their phones with Acronis, but for this you need a working pink screen, which is a no-go for me..

Categories

Resources