Database Users

has anyone ever got this error message...?

i did it!!i can t believe i managed to upgrade to the new t-mobile rom using xdatools without any problem.it went smooth like a glass of oil and now it reads:
ROM Version 4.01.16 ENG
ROM Date 02 04 04
Radio Version 4.21.00
Well done to me( ...and all those people working hard behind this site)!!
it was much less problematic and complicated than i expected and i d like to say to all newbies and not expert people same as me that if i managed to do that, everyone can.just spend an hour or two reading through all the posts in this forum and you ll learn how to do it.
Question: as soon as i soft reset my device there is this error message coming up in the today screen:"This program only works with windows mobile 2003 (4.20.1081).now what program is it referring to?if i press ok to that error window to close the message everything works fine and i don t really know where the error is.has anyone experienced the same?
thanks

...sorry...
....sorry guys...i was trying to post this into the t-mobile 2003 official rom page but i must have entred post new topic rather than post a reply by mistake.i will post it there cose it makes a bit more sense and if someone replys to me it might help some others that just updated to t-mobile 2003 .
developers you might want to delete this post here and i apologize again for the mistake.
ciao

Where did you download the rom? It is possible that if you cooked a rom in one of the kitchens you may have checked a program that will not run under wm2003 so when it atempts to initialise from rom it gives the error. Now you know how its done maybe you should cook another rom and pay particular atention to the additional software options available to you, if the text next to the program says 2002 only then it should be unchecked when building a wm2003 rom.

Re: ...sorry...
emm053 said:
....sorry guys...i was trying to post this into the t-mobile 2003 official rom page but i must have entred post new topic rather than post a reply by mistake.i will post it there cose it makes a bit more sense and if someone replys to me it might help some others that just updated to t-mobile 2003 .
developers you might want to delete this post here and i apologize again for the mistake.
ciao
Click to expand...
Click to collapse
emm053,
I also posted this on the other thread, but thought I'd copy it here in case someone is interested as well:
-------------------------
Yes, I found the same problem. After a little trial and error, I found that the file wm03hotfix.exe in the Windows\Startup folder was the culprit. I moved this file out of Startup into a backup location (just in case), and the problem went away.
Don't know what this file is supposed to do, but I guess we don't need it.
-Jason-

"This program only works with windows mobile 2003 (4.20.1081)"
Had this problem also. what i did was remove the start up programs from the start up folder (all the t-mobile apps) and it doesn't come up any more... again this is what i did to remove the error. i'm not sure this remove it from your XDA.

It's the update for WM 2003
I had the same problem. There's an update in the Startup folder (Found in \Windows\startup) called update.exe or something. Just delete that and it'll sort the problem.

It's the update for WM 2003
I had the same problem. There's an update in the Startup folder (Found in \Windows\startup) called update.exe or something. Just delete that and it'll sort the problem.

Hi mates,
the error mentioned here will occure if you checked "fix multiple reset bug" while cooking your ROM.
the supplied s/w (wm03hotfix.exe) gives this error message. there is another perfect tiny s/w to solve this WM2003 bug and it's called clear_notify.exe
simple search and you will find .. just put it in \windows\startup directory.

Jbed error

I have a samsung i730 (wm2003 sp2), and I tried installing the jbed, it seems to install successfully, and I even try reinstalling whereupon I am told it was already installed. I DO get a message saying it might not display properly as it was designed for a previous version of windows mobile. When I try to run it I get the message that 'jbed' is not a valid pocket pc application.
Any help would be appreciated. I used the package available here:http://forum.xda-developers.com/showpost.php?p=1483665&postcount=24 (direct link - http://forum.xda-developers.com/attachment.php?attachmentid=49222&d=1188897204)
Sorry for the double post- I thought that making a new thread might be wiser than posting it under a different thread. If a mod would delete my post in that other thread that is fine. It didn't belong there and I realize that belatedly. My appologies.

ROM Upgrade & Windows Update

First problem i have, whenever i try to use the windows update i get the following message:
Connection to update server was not available. Check our data connection settings and ensure the device date and time are correct.
Click to expand...
Click to collapse
Date & time is correct, mobile connects to websites ok so i dont see why it wont connect?
while googling this, i found theres a ROM upgrade for the phone aswell, do i need it? the phones 6months old and has ROM version 1.56.405.1
The main reason im wanting to use windows update is because i've tried to install a couple of apps and it tells me i need an upgraded .net framework, is there any other way to do this? and how can i find the latest version?
thanks if anyone can help.

dont waste your time...
in short ,dont waste your time with windows update,it is not used ,at all.
windows update (according to interviews on FACEBOOK..windows mobile, with relevant persons from MICROSOFT.....) is only for very crictical updates and they have never used it ,(as far as i know...?)
best is to navigate to htc website ....
http://www.htc.com/mea-en/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
..make sure to select your country ..top right of webpage ,
note, above link i provided... is for htc middle east and africa...and upgrades might not be applicable to your country...!!!!
the .net issue is seperate issue..has got nothing to do with upgrade..!!..
it is used for certain applications to function...
, google for ..something like ...."netcf 3.5 download "....or/
try this link and make sure it is what you are looking for.....!!!!!
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
follow link..it will take you to microsoft web page (dont worry, it is a free applications ) ,but be aware ,the application is about 33 megabytes,and download it to your pc.
afterwards , you have to connect phone to pc and install from pc.to phone..reboot phone and you application should work.?
( do not try and install from phone ,it wont work )
good luck
willcor

From what I can see you already currently have the latest ROM upgrade that is also available via HTC's website, so there is no need for you to download and install it again. At the time, the ROM was released to improve the overall functionality of the phone and fix some existing issues with it.
Here is what the ROM upgrade contained:
Improved Functions and Fixes
1. Updated the Connection Setup Database.
2. Improved emergency call connections while using Airplane Mode.
3. The GPS position updating speed has been enhanced.
4. A Title bar display flicker in TouchFLO 3D has been corrected.
5. Fixed multiple browsing issues.
Go to this link, and download and install the NETCFv35.Messages.EN.wm.cab to your device. After you installed NETCFv35.wm.armv4i.cab, reset your phone.

thanks alot guys, appretiated

Since installing this, im getting quite a few error reports
"A problem has occured with... please tell microsoft about this program"

Reflashing the rom might help.

lemzip said:
Since installing this, im getting quite a few error reports
"A problem has occured with... please tell microsoft about this program"
Click to expand...
Click to collapse
In that case, (if i was in your shoes) i would try to hard reset first then install the .NET cab first and then any other programs you want afterwards. Then hopefully those nasty errors will disappear

hi, I'm a noob with a question about my HTC tilt 2. Help please!

I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.

drehustler said:
I installed a few apps on my HTC tilt 2 with at&t from some sites. Everything was working fine for a while until my phone started slowing down and freezing alot, so I did a soft and hard reset and it fixed the freezing problems but when I run most of the apps, I get this message, ' This application requires a newer version of the Microsoft .NET Compact Framework than the version installed on this device.' Then it says quit and I hit it and this message comes up in a box, ' .NET CF Initialization Error ' and in the box it states, ' The application failed to load required components. If the .NET Compact Framework is installed on a storage card, please ensure that this card is in place and launch the application again. If this fails, a re-installation of .NET Compact Framework is recommended. Support info: -2147483643 (80000005)' So i downloaded it and get a message saying, ' NETCFSetupv35.msi' and in the box it states, 'There is no application associated with "NETCFSetup35". Run the application first, then open this file from within the application.' I don't know what I'm doing wrong but any help or advise will be appreciated. I don't know much about my phone but I'm pretty sure I did everything right. It all worked before when I installed the apps? Thanks in advance for your help.
Click to expand...
Click to collapse
Yeah it sounds like you had CF 3.5 on there before but somehow it didn't stay after the hard reset (which indicates it was installed sometime after the phone was first purchased).
The file you downloaded is to install it from your PC, not the phone. Put the cab file I attached here on your phone, run that, and it should resolve the issue

Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.

run this from your computer. http://www.microsoft.com/downloads/...49-3c6b-42f1-9fd9-0041345b3385&displaylang=en

drehustler said:
Thanks for your response, when i click on it it get a message saying, 'FIle download failed The requested header could not be located.' i've actually been getting that message a few times with other downloads too. would you know what that means? thanks again for your help.
Click to expand...
Click to collapse
Hmmm no, never heard of it, and basic searching turns up nothing but lists of odd HTTP error codes, that one included. My guess would be an issue with your browser on your PC, but I really couldn't say for sure.
You can also just run the file Rhodium500 linked to above, it's the same .msi file you put on your phone in the first place but couldn't get to run from there...it's an automated installer that just handles everything from your PC instead of you putting the cab on the phone manually.

thanks alot guys, still have no luck and since my phone is under warranty, i'm gonna get a new one. I got 2 htc tilt 2's and only mine is doing this? i'll be back.

dude getting a new touchpro2 wont help... i dont think... like the guy who posted the attachment said, just install it and it should work. if u cant download it use your friend's computer or the library

Dude I had the same problem and if you wait a few mins Ill find it in the microsoft website so you can try downloading from there. Just run it on your computer, then connect your phone with active sync. Go to programs> More> Add/Remove programs and click on the little box there. (I am not sure if the menu goes like this, im actually sure that it doesnt, but for some reason my phone wont connect the WMDM right now so i cant tell u) anyway dont return the phone just because of that cuz the new one might have a problem thats actually harder to fix
I dont remember where I got it from but Ill try to find the original place where I found it.
Heres the file
Microsoft Website
You can download it straight from their website. Its free and it doesnt hurt

thanks, just tried it and had no luck?? i can't even return my phone until the 12th so i'm still trying to figure it out.

hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.

drehustler said:
hey everybody, I reset my sync center/active sync and re downloaded that from the microsoft website and it seemed to have fixed the problem. I appreciate your help very much.
Click to expand...
Click to collapse
Just a hint; it seems that either resetting the device or ActiveSync seems to solve a lot of problems sometimes. Had the same that my device didn't want to accept new Exchange-settings I made on my PC. After resetting both, it worked flawlessly.

[Q] Advanced Config has been revoked by Microsoft

Advanced Config has been revoked by Microsoft please uninstall it.
Anyone else had this?
Big brother is watching you
mmmmmmmmm
same for chaosHUD

all apps that i install have this problem!!!!

Ignore message. Re-Unlock Phone. Install "unlockit.xap" found on this forum and you will never see this msg again

TheOnly1 said:
Ignore message. Re-Unlock Phone. Install "unlockit.xap" found on this forum and you will never see this msg again
Click to expand...
Click to collapse
Thanks for that, it was all the apps i downloaded before i activated it
all the market one's are ok, thanks again for the heads up.

I have searched the entire site and found no unlockit.xap. Could you please provide a link to it. I can use ChevronWP7 but it will only lock again. Thanks!

mr_brew said:
I have searched the entire site and found no unlockit.xap. Could you please provide a link to it. I can use ChevronWP7 but it will only lock again. Thanks!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=10605588&postcount=1

Can not re-unlock
Keep getting a message saying having trouble communicating with the phone.
-make sure it connected by USB
-please start the zune program
I have checked with zune and it is connected.
Have reinstalled the certificate
restarted the phone and computer.
Any ideas?