Related
techspy said:
Well, I installed on my Jamin and all the options show up etc. Now I am in the hunt for a stereo headset to try the AD2P.
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?p=255844#255844
Still dont have a a2dp headset to try it out. However, I removed the patch as I was getting an error about not being able to start audio recording device when I would try to record video with audio. Not sure if was related, but the problem went away after restoring a backup from several days before installing the patch. I will install it again when I get the headset to see if it works.
Just tried.. I didn't get my headset to work..
Waiting for another patch or another solution..
Pasci said:
Just tried.. I didn't get my headset to work..
Waiting for another patch or another solution..
Click to expand...
Click to collapse
You're sure you set it up right?
What was it like?
I'm not sure if I've done all correctly..
I installed the cab as usual, or is there something else to keep in mind?
I got the option in my bluetooth settings as shown in http://forum.xda-developers.com/files/img_0270.jpg
The bluetooth recognized my HP-Headphone but when I'm playing music then the sound didn't play on headphone, still on ppc's speaker..
Any ideas?
Pasci said:
I'm not sure if I've done all correctly..
I installed the cab as usual, or is there something else to keep in mind?
I got the option in my bluetooth settings as shown in http://forum.xda-developers.com/files/img_0270.jpg
The bluetooth recognized my HP-Headphone but when I'm playing music then the sound didn't play on headphone, still on ppc's speaker..
Any ideas?
Click to expand...
Click to collapse
Follow these instructions
http://msmobiles.com/news.php/4679.html
Are you using an A2DP headset?
Yes, i checked with two different A2DP Headsets..
Done as shown in the link..
Doesn't work.. You can't connect to the headset..
Another Bug is that the WMP no longer want to play files after installing the cab..
Pasci said:
Another Bug is that the WMP no longer want to play files after installing the cab..
Click to expand...
Click to collapse
There volume is probably on 0%.
Edit: Doesn't apply.
27 said:
Pasci said:
Another Bug is that the WMP no longer want to play files after installing the cab..
Click to expand...
Click to collapse
There volume is probably on 0%.
Click to expand...
Click to collapse
No.. There is an error message, that it can't play some songs.. (tried different filetypes..)
Pasci said:
No.. There is an error message, that it can't play some songs.. (tried different filetypes..)
Click to expand...
Click to collapse
There's a way to un-install the patch without doing a hard reset. Look through that thread on the magician forum.
A2DP for Magician do not compatible with Prophet becaus of audio driver. I faund this: http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=6376&catid=26, may be it will helps. I going to check this out right now.
27 said:
There's a way to un-install the patch without doing a hard reset. Look through that thread on the magician forum.
Click to expand...
Click to collapse
Hard reset didn't matter.. I installed it on a development device..
bombomtr said:
A2DP for Magician do not compatible with Prophet becaus of audio driver. I faund this: http://buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=6376&catid=26, may be it will helps. I going to check this out right now.
Click to expand...
Click to collapse
Links doesn't work for me.. Waiting for a (positiv) feedback about your attempt..
I try this: Widcom150AMD. Unfortunately, it not works on my S200. Bluetooth won’t start and audio turns off. I'm afraid we have to wait HTC release proper Bluetooth stack extensions for Prophet.
bombomtr said:
I try this: Widcom150AMD. Unfortunately, it not works on my S200. Bluetooth won’t start and audio turns off. I'm afraid we have to wait HTC release proper Bluetooth stack extensions for Prophet.
Click to expand...
Click to collapse
Do u know when? I'm using Dopod 818 Pro + BT Headset iTech Clip S38 now... I'm awating for that 'coz I want to use stereo ability from my BT
heaset now...
Theerayuth said:
Do u know when?...
Click to expand...
Click to collapse
Unfortunately, I don’t know when HTC release A2DP for Prophet. I think they wait till Microsoft released ‘Windows Mobile 5 Adoption Kit Update 2.0’ by end of first quarter 2006 (which is over already). So it could happen any moment. I can’t wait also, because I’d like to use my Plantronics Pulsar 590 in full scale.
bombomtr said:
Theerayuth said:
Do u know when?...
Click to expand...
Click to collapse
Unfortunately, I don’t know when HTC release A2DP for Prophet. I think they wait till Microsoft released ‘Windows Mobile 5 Adoption Kit Update 2.0’ by end of first quarter 2006 (which is over already). So it could happen any moment. I can’t wait also, because I’d like to use my Plantronics Pulsar 590 in full scale.
Click to expand...
Click to collapse
thanks for your response. So, i think that both of us
are under the same situation....
waiting for never ending story..... :?: :?: :?:
anyway, please update me when u have latest info... :idea: :idea: :idea:
I KNOW I KNOW, WIDCOMM stack...but what I want to know is basically can I route audio properly to my mono plantronics headset. I used to do this with my Wizard, and the headset routes audio fine during phone calls. Why can't a small program force this connection for streaming music. I don't care if it sounds like crap, i just want to be able to listen to it. ARGH this is driving me crazy. Any help would be nice.
If you are just going to say "try the widcomm stack" please don't. I read it doesn't play well with MS Voice Command and I use VC too much to not be able to have it function properly. Thanks in advance...
I used BTAudio Toggle with my 8125 and the 640 (to listen to MP3's off of TCPMP or WMP). Have you tried it on your current phone?
scharnet said:
I used BTAudio Toggle with my 8125 and the 640 (to listen to MP3's off of TCPMP or WMP). Have you tried it on your current phone?
Click to expand...
Click to collapse
yes, none of these programs seem to work with the 8525...but they did work with the 8125...
I know you don't want to hear it, but upgrade to WM6, and then apply Widcomm stack and MS vc 1.6. Works great. As a matter of fact, I installed it because Ms VC didn't seem to work right with ms bluetooth stack. Now, plantronics 640 works great, all audio is routed and MS Voice Command works flawlessly....
I have found all you need is the bbs_hermes_03.cab file (can't remember the exact name) from this post. the other files were not needed by me. Ran the cab file and everything worked
http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72
Yeah th BBS_Hermes_03 works, it reroutes audio to bluetooth once activated. But the down side is DUN and Bluetooth active syn don't work no more.
hksmr2 said:
Yeah th BBS_Hermes_03 works, it reroutes audio to bluetooth once activated. But the down side is DUN and Bluetooth active syn don't work no more.
Click to expand...
Click to collapse
Sorry, I did not know about that. I don't use bluetooth DUN, or Bluetooth Active Sync. Bluetooth is much to slow for that to me..
eagle 1 said:
Sorry, I did not know about that. I don't use bluetooth DUN, or Bluetooth Active Sync. Bluetooth is much to slow for that to me..
Click to expand...
Click to collapse
hrmmm, i'm running wm6. I'll give that a try later today. I didn't read anyone saying that in the thread. I'll give it a try.
I got a weird one. I connected my pda to my pc via High Quality Audio profile.
Now when I play a music file on my PDA, I get no sound from my speakers, but, upon going into Sounds Control Panel in Vista, I see the Bluetooth Microphone is receiving the data. When I stop the song, the data stops. When I play, it starts. How do I reverse this so that when I play a song, it shows up on my PC as output and not input, this is strange...
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
hksmr2 said:
Yeah th BBS_Hermes_03 works, it reroutes audio to bluetooth once activated. But the down side is DUN and Bluetooth active syn don't work no more.
Click to expand...
Click to collapse
I installed this but it does not work AT ALL. I can't even use my bluetooth to talk on the phone.......wtf?
gthing said:
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
Click to expand...
Click to collapse
Apologies and apoplexies for the OT.
Hello gthing: Can you point me to a tutorial on using mortscript for us mere "mort"als? (The root "mort" sure is weird - dead man writing?
I am not highly technical, but want to understand some of the things I run across in the forum better.
Thanks
Ben
gthing said:
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
Click to expand...
Click to collapse
Not sure if it's the same mortscript I'm using, but in the MS VC Bluetooth thread there is one posted as well.
Using the steps there, I'm quite easily able to switch from VC to mono audio routing.
Someone summed the steps up quite nicely, do a search for my name pkley towards the end of that thread...
BigBen said:
Apologies and apoplexies for the OT.
Hello gthing: Can you point me to a tutorial on using mortscript for us mere "mort"als? (The root "mort" sure is weird - dead man writing?
I am not highly technical, but want to understand some of the things I run across in the forum better.
Thanks
Ben
Click to expand...
Click to collapse
Just install mortscript (find RC9) and then the mscr files will run as applications. You can put them in your applications folder and even run them using voice command if you have it.
If you want to write your own scripts, it comes with documentation, and you can find a few examples at gthing.net/scripts <----would really appreciate more scripts on that site if anyone has any they can upload.
gthing, thanks for the reply! I am going to look into this!
Ben
Ok, none of these things help...in fact the wicomm stack doesn't work with my bluetooth headset (plantronics 320) and I can't even un-install the damn thing. It just locks up my phone in the endless spinning rainbow wheel, or literally freezes. More-over none of these replies help as far as routing all sound from my phone to a MONO bluetooth headset...
gthing said:
Here is a mortscript I wrote to accomplish this:
http://gthing.net/scripts/index.php?option=com_docman&task=doc_details&gid=8&Itemid=2
Works on my 8525
Click to expand...
Click to collapse
Thank you - works perfectly !
I am in the process of moving from a TP to a TP2, and am configuring the latter, however (and I have seen this problem elsewhere regarding this phone) I cannot get my bluetooth headset to play nice with MSVC. Specifically the button to initiate the call.
I have tried the steps listed by bengalih and all should work. From what I have read, they are using a different bluetooth stack for the TP2 which is the issue.
So I have a few questions.
1. Has anyone got the headset button to activate MSVC successfully?
2. Is there a way to change the bluetooth stack without changing the ROM
3. will changing the ROM fix this? Any way I can tell which ROMS will have a working bluetooth stack?
I have Vodafone UK branded model.
This is I think the last thing that I need to make the phone 'functional' for my daily use, and so would be really grateful for any advice.
crazyC said:
[...]
1. Has anyone got the headset button to activate MSVC successfully?
2. Is there a way to change the bluetooth stack without changing the ROM
3. will changing the ROM fix this? Any way I can tell which ROMS will have a working bluetooth stack?
[...]
Click to expand...
Click to collapse
1. Yes, with certain headsets that will allow a verrry loooong press without turning off.
2. I suppose it's theoretically possible, but I do not know for sure.
3. Yes. Some of the cooked roms work fine with MSVC and bluetooth headsets on the TP2.
Could you give examples of the cooked roms that work?
Cheers
C.
any trick or hack we can borrow from "bt-MSVCworking roms" and transplant in stock roms? maybe a skilled dev might try to do something.... PLEASE guys!
crazyC said:
Could you give examples of the cooked roms that work?
Cheers
C.
Click to expand...
Click to collapse
NRGs Genesis ROM works for me. http://forum.xda-developers.com/showthread.php?t=553506
Gordon
Flashing now and will confirm experience with my two headsets shortly.
EDIT:
Only had time to test the specific problem identified at the start - both headsets work fine now. Hurrah. I do not know the specifics behind why, or if this will apply to all 6.5 based roms. But for anyone desperately seeking a resolution the headset initiation of MSVC, using the ROM above does fix it. And so far the NRG ROM does seem good.
crazyC said:
Could you give examples of the cooked roms that work?
Cheers
C.
Click to expand...
Click to collapse
I currently use EnergyROM version 20090822 (Titanium) with MSVC 1.6.21040.
Thanks to those above for their help.
thank you for the contribution, but for who is keeping stock rom, any possible solution??? I would sell my soul for this...
A "stand alone solution" for Touch Pro2s with an original ROM would be great. Possibly one of the ROM cookers can extract it for us.
Thanks a lot in advance,
Klaus
that would be really appreciated!!!
Got it to work, but...........
Hi I have a TP2 with MSVC installed. I got it to work by editing the regsitry and swapping SDDialer.exe with voicecmd.exe. It works great. I press the button on my bluetooth headset and MSVC is invoked.
The only problem is that the voice commaned that i say has to go through the TP2 microphone not the bluetooth headset microphone. Any one knows how to direct the audio input to the headset microphone???
I am using Miri cooked ROM 23017 with manila v2.5
rgd
Raed
this bluetooth activation is a real bugger!! does the audio from VC go to the device loudspeaker, or BT headset? that would be a beginning, somehow...
any luck with cyberon voice commander yet?
cyberpunk627 said:
this bluetooth activation is a real bugger!! ...
any luck with cyberon voice commander yet?
Click to expand...
Click to collapse
Well I have the Voda version of the TP2 and I also have a spare to play with (I cracked the screen on my first one and got a new one but they never asked for the old one back - it works fine) so I loaded the EnergyROM from a link elsewhere on this thread on to it. My bluetooth headset does not work with the Cyberon Voice speed dial program which I prefer - although this ROM does alow you to put all sounds through the headset. It worked fine on my old TyTn from Voda. Like you said, this is a real bu**er!
Barry
mmmh I'm becoming more and more obsessed with this. I googled everywhere but found anything... someone reports msvc and cvc as working, someone else not.. but nobody says it's working from BT headset... blame on htc that forgot such an important thing!
cyberpunk627 said:
mmmh I'm becoming more and more obsessed with this. I googled everywhere but found anything... someone reports msvc and cvc as working, someone else not.. but nobody says it's working from BT headset... blame on htc that forgot such an important thing!
Click to expand...
Click to collapse
It's all true
I understand that on the Telus ROM MSVC works with Bluetooth out the box
MSVC and CVC do work, UNLESS you want to use Bluetooth, when they don't (with stock ROMS in the EU) ;-)
I'm using MSVC on NRGs Genesis ROM and it works from Bluetooth as it should. If I get a Chance I'll install CVC and give it a try and report back.
Gordon
it would be nice if someone can mange to transplant needed files... I like the bluetooth stack on TP2, really better than usual, but this thing needs more attention from HTC and the 3rd party developers.
msvc is 3 years old as of now, no newer versions, same as cvc... too bad, technology evolved a lot it 3 years, and these programs might improve really really much!! especially the recognition algorythm, and functions.
well, I hope the new wm6.5 will bring some BT improvements for TP2 then...do not want to stick with custom roms yet. keeping my fingers crossed!
should you manage to try, let us know about cvc and make a little comparison for us! you lucky! ;-)
cheers
I´m usign Smaberg´s Touch X "HERO" EDITION and VC works just fine.
GordonTGopher said:
I'm using MSVC on NRGs Genesis ROM and it works from Bluetooth as it should. If I get a Chance I'll install CVC and give it a try and report back.
Gordon
Click to expand...
Click to collapse
As my touch screen has died I am without a TP2, so I can't do this for the moment
Gordon
I've had this problem sometimes on my VZW CDMA Touch Pro 2. my solution has been to turn off the headset and turn it back on. It seems the problem starts for me when I have the headset on when rebooting the phone. Possibly MSVC doesn't detect the presence of the headset or something to that effect.
Does anybody know how to improve sound quality for playing music over A2DP profile with Parrot handsfree? On Rhodium i applied some tweaks for quality improve and it was clear and nice to listen, but Leo is not so nice to hear
Thx a lot
I had to tweak my diamond too, looked for tweaks on the HD2 but couldnt find them, but the sound quality is way better on my HD2. I dont think it needs the tweeks tbh.
If i take both, TP2 and HD2 to my car, let play the same song and im switching between HTC's then has got TP2 much more clear and brilliant sound, without any quiet cracklings from tweeter speaker like it is on HD2 :-(
Same problem here, sound quality for a2dp is not what it should be. I tried adding the LineSpeed registry setting, it did improve the overall quality, but did not remove the cracking noise - and in my case I still have frequent skipping and gaps in the audio playback. Have not yet had a reply for Tech Support, and if/when I do, I don't think it'll be a very intelligable one...
Yop, i think too, that the answer will be unusable, or maybe they tell you that u should do a Hard rst :-D
First time i connected it to HF and let music play i thought that is a bad quality song, but it isn't :-(
Anyone idea?
I know there are some settings to definately improve the sound of A2DP. I've added them on my previous HD, and worked perfectly after that! I just found some things you might try (I just applied them myself as well, but havent tested them yet; I'm almost sure they'll work):
http://forum.xda-developers.com/showthread.php?t=308752&highlight=A2DP+settings+bitpool
If I'll find the previost post which I applied in the past on my HD, I'll let you know. If the one I just posted will work, I'll let you know as well of course, because the litteral and figural crappy sound of A2DP is something I hate as well...
Edit:
Take a look at those settings as well from J-A-J-O at page 6:
http://forum.xda-developers.com/showthread.php?p=1677577#post1677577
Again, I don't know exactly if it were those settings, but they sound familiar to me. I'm also busy trying to get the best sound quality via bluetooth out of my HD2
More info about the settings:
http://forum.xda-developers.com/showthread.php?t=310438
Kind regards,
GreenFrog
The XDA tweaks are rubbish and do not work. I currently have a call out with HTC.
I have removed all reg tweaks from my HTC and now can get A2DP working on my parrot ONLY in the following situation:-
(1) Reboot HD2 (hold end key and select off. then switch on)
(2) Allow to connect to Parrott (will connect handsfree first)
(3) Open bluetooth from settings and select stereo audio and select connect.
(4) select handsfree and select disconnect.
(5) Press PLAY on the parrott kit
By doing this I get no skipping at all and the quality is good. I have no tweaks running.
This is obv crap and is why I have been speaking to HTC all week.
Steps 1-5 have to be strictly followed for this to work.
The BT tweaks mentioned on this forum do not work. They only appear to work as you have rebooted. After using the HD2 for a while and then connecting A2DP, skipping will occur again.
Try steps above and it will work.
Interesting! I'll try that on mine. Greenfrog all of those links and bitpool settings relate to the Microsoft Bluetooth stack. However the HD2 uses the Widcomm stack so those registry settings can't be made.
I too am fed up of the bluetooth sound quality. How can they assume we'll be happy with this mediocre sound?! I can't see why with a 1Ghz processor it skips.
Have you guys tried the A2DP with the latest 1.61 ROM? I'm still on 1.43....
When I find my 'goldcard' that I made I'll try it on 1.61 and let you know
We'll get there in the end....this is really my only bugbear with the HD2, so it would be good to get it fixed!!!
There got to be a way!
I, too, am really p***ed off by the bad audio quality i get using stereo blutooth. It's really an issue with the HTC HD2 and apparently no pro reviews pointed it out!!! I use it with the sony DR-50 which are one the best A2DP headphones out there, but the sound is horrible Please help...
I'm too suffering from the A2DP situation...
The Linespeed registry hack helps me on some devices ( HKML\Software\Widcomm\Plugins\AV add DWORD Linespeed with value between 64 and 512, the higher the better sound but higher probabilty for skipping).
With Linespeed = 320 sound is great and I have no skipping with a Sony DR-BT160AS. But: My Motorola S9 badly skips unless I have it very close to the HD2. Linespeed = 256 is working ok with both devices...
BUT:
I also have a blueLino A2DP Receiver which has a bad quality on both settings, at least on some songs. That's really disturbing.
Just a quick update, I've just flashed to 1.61 and it makes no difference. Default A2DP sound quality is unacceptable. Grr
purnelld said:
The XDA tweaks are rubbish and do not work. I currently have a call out with HTC.
....
The BT tweaks mentioned on this forum do not work. They only appear to work as you have rebooted. After using the HD2 for a while and then connecting A2DP, skipping will occur again.
Try steps above and it will work.
Click to expand...
Click to collapse
-----------------------------------------------------
Well, first I have to say I don't have the 'skipping' issue at all. I have my HD2 connected via bluetooth to my Pioneer DEH-P7100BT car radio. I have a clear connection when calling, but when playing music via bluetooth, I have the 'hissing' issue.
Next is that I have to admit that when I changed the settings according to my previous solution, did work a little, but not as it supposed to. When I had my previous Touch HD if found a link which worked perferctly for me! When I changed to those settings, the hissing were gone completely and the sound quality improved to CD level. Although, I'm still searching those ones again for my HD2 at the moment....
So, conclusion this far is that it totally depends on the hardware which you are connected to as well.
Regards,
GreenFrog
@Greenfrog:
I guess the bitpool settings which worked well on my HD as well, only work when using the MS Bluetooth stack. The HD2 uses the WIDCOMM Bluetooth stack, I haven't found a noticable difference.
The LineSpeed registry setting does improve overall audio quality, but I still have skipping and playback gaps. Very poor performance for the performance beast the HD2 is. I urge everyone to report this to HTC (I did) - this is really unacceptable.
I will also report this to HTC. I am so frustrated by it tbh
As Moses posted...I had linespeed set up on my TP2 and the sound was great, but now i have no time to test it now, can someone other test regitry key?
Bluetooth settings
Can be found here HKLM\Software\WIDCOMM\
A2DP Tweak Provided by R_phAn (Please note this will not work with all devices)
As we know from the past, each device has it's own preferences and capabilities (So you'll have to play around)
Managed to improve soundquality by adding DWORD 'LineSpeed' to HKLM\Software\WIDCOMM\Plugin\AV\ with a value of 320.
it is posted here for TouchPro2: http://forum.xda-developers.com/showthread.php?t=524655
Edit: I tryied it tomorrow morning and it is still the horrible quality, poor music quality and during the call skipping :-/
jonboyuk said:
...all of those links and bitpool settings relate to the Microsoft Bluetooth stack. However the HD2 uses the Widcomm stack so those registry settings can't be made.
Have you guys tried the A2DP with the latest 1.61 ROM? I'm still on 1.43....
When I find my 'goldcard' that I made I'll try it on 1.61 and let you know
We'll get there in the end....this is really my only bugbear with the HD2, so it would be good to get it fixed!!!
Click to expand...
Click to collapse
Okay, thanks a lot for this update! I was really unaware about the different stack, so I don't have to look further for the the previous links anymore... I'll try to add linespeed as well to see if it works with my Pioneer car radio. I hope it will...
There should be an answer for sure for this issue. I also cannot understand why it have to be this difficult. The previous solution did work very well. Why have they changed to the other stack anyway? Does someone know that?
I'm running the 1.48 ROM btw.
GreenFrog
I found one thing, i'm using SPB Radio for online streaming, when im listening in my car streamed radio then the sound quality is excelent...? How is that possible?
That's a very good question.
I experimented a bit with different quality settings during mp3 encoding. I found out that there indeed is a connection between the quality settings of the mp3 file and the badness of the sound quality, at least to a specific degree.
The most important setting seemed to be the stereo setting. If I set a song to "Joint Stereo" its by far better than normal stereo, although not perfect, yet. That's very confusing.
Do you know the settings of the radio channels you can stream with good quality? Maybe that would be worth a test.
--Update--
So I had a predictably useless response from HTC. Namely 'have you tried unpairing and repairing' and 'your device may not be fully compatible, please check our website for a list of compatible devices'.
Useless indeed. Their compatible devices amount to 3 items! The phone is either A2DP or it isn't. There are no compatibility options - it's happening to us all.
So, I haven't mustered up the energy to continue onto the next pointless exchange of basic trial and error possibilities. No doubt their next reply will be "have you tried rebooting the phone"...
Anyway, I digress. I noticed something today. I put on a new album to my SD card and out of nowhere the skipping was worse than ever. Audiomanager is always on the lookout for new songs as you may have realised. When you have music playing, a small circle rotates to show the player is searching. During searches whether or not you've introduced new mp3's to your device, it always makes the skipping far worse. When my circle had come to a stop, then the audio was fine....with very rare pauses and skips.
Still there but much less obvious.
Well that's my latest update and I will continue my investigation. I wonder if this skipping occurs in other music programs? ie wmp or pocket player? Has anyone tried?
Great work, guys. Nice to see a lot of people looking for a solution. I REALLY want to get this A2DP thing working right, it is bugging me a lot, and I'd like it to be fixed when I'm going on vacation (I'll be driving to two straight days, and would love to listen to my own music then). That'll be in about six weeks, so there's still some time left.
I'll try SPB radio myself, see if that causes the same amount of skipping. It could be that it is not the BT link causing the skipping and pauzes, but the audiomanager itself. That would be a bummer, because fixing that is probably way beyond what we can do here, and we'll have to hope for a HTC fix or a custom rom with an older and better working version of the audiomanager.
In my search for possible solutions, I found the priority of the A2DP can be altered. I've added the reg Dword value "Priority256" to HKLM/Drivers/BuiltIn/BtA2dpSnd, with different values. If the value is too high (150+), nothing changes. Set it too low - I tried 60 - and BlueTooth fails to start altogether. I've now set it 149, and it seemed to work, but haven't done extensive testing to see if the skips/pauzes don't return. Will get back on that.
jonboyuk said:
--Update--
(...)
I wonder if this skipping occurs in other music programs? ie wmp or pocket player? Has anyone tried?
Click to expand...
Click to collapse
I've tried PocketMusic, qualitywise no difference. I don't remember if it had the same skipping / pauzes problem, but the problem for me was it doesn't work with the AVRCP, so I can't play/pauze/ff/rew with my remote, and having to use the screen while driving is a pain - I've mounted my device quite high. I was really hoping to use the inbuilt musicplayer
So, i use my kindle to listen to some online streams in the mornings, recently in the last build of Gede's rom and in eye candy i can no long listen to the streams, they startup perfect like they are running but no audio comes out. Audio works in everything else.. This is in dolphin/firefox/built in browser..
Mainly its the o&a stream at yourmuze.fm.. The only thing i see in common in those new builds is the beats audio crapola.. (anyone else think its just hype/marketing bs? ) anyway to remove beats to find out if thats the issue?
Icetech3 said:
So, i use my kindle to listen to some online streams in the mornings, recently in the last build of Gede's rom and in eye candy i can no long listen to the streams, they startup perfect like they are running but no audio comes out. Audio works in everything else.. This is in dolphin/firefox/built in browser..
Mainly its the o&a stream at yourmuze.fm.. The only thing i see in common in those new builds is the beats audio crapola.. (anyone else think its just hype/marketing bs? ) anyway to remove beats to find out if thats the issue?
Click to expand...
Click to collapse
Yourmuze.FM doesn't work with the SGT7 rom either.
veeman said:
Yourmuze.FM doesn't work with the SGT7 rom either.
Click to expand...
Click to collapse
Thanks, you know if that rom is using "beats" audio?