Everytime when I plug in the charging usb cable to phone, the phone will change to Landscape mode when there is incoming call!
Is there anyway to disable this function?
Hi, I can't replicate your problem, sorry. Do you have additional screen rotation software installed which you could disable? maybe its a glitch that would be fixed with a soft reset? (red button inside back cover or remove abattery for 10 seconds).
cMMY69 said:
Hi, I can't replicate your problem, sorry. Do you have additional screen rotation software installed which you could disable? maybe its a glitch that would be fixed with a soft reset? (red button inside back cover or remove abattery for 10 seconds).
Click to expand...
Click to collapse
I haven't installed any other rotation software, my ROM is HKCSL stock rom and I believe that this is the default settings.
did you try plug in the usb charging cable then press the phone button? I believe it will change to landscape mode.
Related
Hello,
When I turn on my PPC, the Flight Mode is automatically ON by itself, that means the Phone is OFF, but I didn't activate the flight mode before I turn off my PPC... However, if I just soft-reset the PPC, this problem didn't occur.
What's wrong? Please help!!
Thanks.
Raymond
Anyone help??
Thanks!
Known issue. I believe this will be corrected in the upcoming batch of ROMs.
That's nice to know! It's been annoying me for quite some time ><
it happens only when you turn off the device(during the shutdown).
did you try using a soft-shutdown?
I began to sufer this problem when I add the "change default keyboard workarround". The initial phone panel to enter the pin opens and automatically close in less than one second.
And if I disable this keyboard trick the problem dissapear.
I will try to add a delay in the opening of plugins and trick (maybe with memaid) and report....
"Default Keyboard workaround" Are you referring to SIPChange?
elivne said:
it happens only when you turn off the device(during the shutdown).
did you try using a soft-shutdown?
Click to expand...
Click to collapse
If I turn the PPC off (by press and hold the power button 5 seconds), then turn it on again, this problem occur.
But if I just restart/reset it, no problem.
---Sleuth255: "Default Keyboard workaround" Are you referring to SIPChange?
Yes, I mean your anyway fantastic SipChange program, but at the time of answer I don't remember the name.
Thanks for it. And a appologize about my poor english
can I plug and unplug the keyboard without turning off the Athena every time?
Why not ? When you plug in the keyboard, it will turn on the Athena, and change to landscape mode automatically
Yup, it snaps on and off whenever you like.
Mmm, magnets.....
Hello.
Problem with SPV M5000, power button don´t turnd device off
Vhere is the problem can be, soft or hard?
Thanks!
MazdaGTI said:
Hello.
Problem with SPV M5000, power button don´t turnd device off
Vhere is the problem can be, soft or hard?
Thanks!
Click to expand...
Click to collapse
Hardreset and try, if not reflash ROM
Good luck,
Hard Reset I tried earlier but did´nt work.
You do realise the SPV doesn't actually 'switch off' ?
Your power button will merely switch the display off and send the unit into sleep mode. If you want it 'off' you'll need to pull the battery and put it back in. The unit won't power up again until you press the power button.
Sometimes my screen goes blank, other times I can still see the text etc.
I started to use a shutdown exe from my Wizard. It seems to do a better job.
At least, when my Uni is connected to Windows Mobile Device Center, I hit the power button and the backlight goes off, WMDC stays connected. If I use the Wizard's exe it disconnects.
Attached for you to try anyway.
Thanks
If I understund right, this PDA can turn off only with removing battery thats stranger
I've never understood the reasoning behind it either. I suppose you have to consider that it was probably always intended for people to use these as their main phone (I don't - never have) and most people never turn their phones off. I know my main phone is never off. Still, it DOES have the option to turn it off if need be, whereas the SPV only has a sleep and flight mode.
Did you try the exe?
I've got a weird problem with my Diamond and i can't figure out a solution. I think it's due to .net 3.5 but i am not sure.
When i plug in the factory handsfree ( wired ) i can't turn off my screen. The light fades to 20% but the screen doesn't turn off. This is killing my battery.
The only fix i could think of is starting WMP , hitting play, screen off and then plugging in my headphones. This seams to work. But it's not a real solution.
If someone can help.. I would greatly appreciate it.
Flash my last ROM, V3 23049 and your problems will disappear, read readme first.
OR
You can try to install DiamonTweak and set "3.2 Audio booster" from "Disabled (Default)" to "Enable"
Power button?
dark2y said:
I've got a weird problem with my Diamond and i can't figure out a solution. I think it's due to .net 3.5 but i am not sure.
When i plug in the factory handsfree ( wired ) i can't turn off my screen. The light fades to 20% but the screen doesn't turn off. This is killing my battery.
The only fix i could think of is starting WMP , hitting play, screen off and then plugging in my headphones. This seams to work. But it's not a real solution.
If someone can help.. I would greatly appreciate it.
Click to expand...
Click to collapse
... do you mean when you hit the power button, the screen stays on? My screen doesn't switch off automatically with the headphones in. I press the power button to turn the screen on and off
I diden't try to flash it because it would be the third time this month. I can't take another reinstall! I was hoping on a registry hack or a fix cab or something. I really don't think it's the ROM's fault.
Setting "3.2 Audio booster" to enabled didn't work.
grahamkdt said:
... do you mean when you hit the power button, the screen stays on? My screen doesn't switch off automatically with the headphones in. I press the power button to turn the screen on and off
Click to expand...
Click to collapse
My doesn't turn off for nothing. I press the power button and the light fades to half, but the screen isn't turning off. I have to unplug the headphones , press power, the plug them in again.
Fixed
I figure it out. I flashed with a ROM that dosen't include .net CF 3.5 . It worked and i don't have this problem anymore.
bogy16 you were right. Switching the ROM was the solution
The screen is broken. I cannot see anything and cannot unlock the phone.
But I am sure the phone is work because I can still using the web Whatsapp.
Is there any adapter without app installing can output the screen to TV?
Or any dock / adapter support hdmi out (without app installation / usb debug mode enable) and mouse control so that I can backup the data?
I installed AnyDesk in my PH-1 but it only available when the app is open
Howerver, I cannot unlock the phone to open it
zckh said:
The screen is broken. I cannot see anything and cannot unlock the phone.
But I am sure the phone is work because I can still using the web Whatsapp.
Is there any adapter without app installing can output the screen to TV?
Or any dock / adapter support hdmi out (without app installation / usb debug mode enable) and mouse control so that I can backup the data?
I installed AnyDesk in my PH-1 but it only available when the app is open
Howerver, I cannot unlock the phone to open it
Click to expand...
Click to collapse
So you have black screen of death (BSD) ie software or you think it's actually physically broken eg screen cable disconnected etc?
Anyhow, have you tried forced reboot (Press and hold the Volume Down and the Power keys together for up to 10 seconds ) which will perform the simulated battery disconnect, also try without SIM card as this used to sometimes fix black screen issue on other phones.
You could try using a mouse with a USB OTG adapter with talkback turned on (long press both volume keys at the same time for 3 seconds, you might have to try a few times) ... then you should be able unlock phone & turn on anydesk. ,(Basically you move around by swipe right or left, or click mouse pointer once to move that area & once you hear the option you want then double click anywhere to select) (I'm assuming the otg mouse will still work with talkback on)
[if it's software issue then maybe screen will work in recovery ... but if screen doesn't work you'll have to be very very careful not to select a wrong option!]
zckh said:
The screen is broken. I cannot see anything and cannot unlock the phone.
But I am sure the phone is work because I can still using the web Whatsapp.
Is there any adapter without app installing can output the screen to TV?
Or any dock / adapter support hdmi out (without app installation / usb debug mode enable) and mouse control so that I can backup the data?
I installed AnyDesk in my PH-1 but it only available when the app is open
Howerver, I cannot unlock the phone to open it
Click to expand...
Click to collapse
You can use most any USB-C to HDMI adapter. If it works for a MacBook Pro with USB-C it will probably work for you.
No special software needed. It automatically mirrors the screen.
IronRoo said:
So you have black screen of death (BSD) ie software or you think it's actually physically broken eg screen cable disconnected etc?
Anyhow, have you tried forced reboot (Press and hold the Volume Down and the Power keys together for up to 10 seconds ) which will perform the simulated battery disconnect, also try without SIM card as this used to sometimes fix black screen issue on other phones.
You could try using a mouse with a USB OTG adapter with talkback turned on (long press both volume keys for 3 seconds, you might have to try a few times) ... then you should be able unlock phone & turn on anydesk. ,(Basically you move around by swipe right or left, or click mouse pointer once to move that area & once you hear the option you want then double click anywhere to select) (I'm assuming the otg mouse will still work with talkback on)
[if it's software issue then maybe screen will work in recovery ... but if screen doesn't work you'll have to be very very careful not to select a wrong option!]
Click to expand...
Click to collapse
Thanks for your reply. I am sure my phone is working because I can capture the screenshot and wait for auto upload to google photo.
OTG Mouse and keyboard is working, but no screen so I cannot unlock the phone.
tech_head said:
You can use most any USB-C to HDMI adapter. If it works for a MacBook Pro with USB-C it will probably work for you.
No special software needed. It automatically mirrors the screen.
Click to expand...
Click to collapse
Thanks for your reply. Just order it from Amazon.
zckh said:
Thanks for your reply. I am sure my phone is working because I can capture the screenshot and wait for auto upload to google photo.
OTG Mouse and keyboard is working, but no screen so I cannot unlock the phone.
Click to expand...
Click to collapse
so did talkback work with mouse pointer? You don't need to see screen it will "talk" to you so you know where you are on screen. Though using the HDMI adapter would be easier
IronRoo said:
so did talkback work with mouse pointer? You don't need to see screen it will "talk" to you so you know where you are on screen. Though using the HDMI adapter would be easier
Click to expand...
Click to collapse
No. Cannot active the talkback function by press Vol Up & Down
I tried to connect Travel Inspira usb-c => hdmi adapter with my broken PH-1 or new PH-1 (updated to Android P version). Both of them no signal show on TV / Monitor.
The PD power supply is necessary? Any setting should I set in PH-1?
zckh said:
No. Cannot active the talkback function by press Vol Up & Down
Click to expand...
Click to collapse
It worked with mine but maybe I changed the settings, as shown in screenshot, when I was messing with using the accessibility settings with an automation app, I can't remember what the default was now. Sorry.
Hope you get it working with usb adaptor.
[Update]
My broken's PH-1 does not work but OK for the newest PH-1
I get another adapter which is for Nintendo Switch use and it is work
However the screen is too narrow.
I guess it is because my screen is broken, the resolution goes wrong. (width of resolution was set to 130px)
By adjust the font text to smallest and go in "Developer Option", it is more better by changing the width of resolution to 400px
But it still have a navigation bar at the right hand side of the screen