ive been searching for a thread on this subject, and i havent found precisely the answer to the problem im having. i am unsure of the cause, but every so often, my phone, by itself, tried to call the last number i dialed in rapid succession, dialing and then hanging up and re-dialing. i often have to soft reset or close out everything for it to stop.
any ideas or suggestions on what it could be or what to do to prevent it??
Enable devicelock so the buttons are disabled till you want them enabled.
Every time i call someone, when they answer the call the screen turns off.
If i want to end the call or do anything else i have to turn the screen back on before i can press end.
Is there a way to stop this happening?
I have tweak_HD and changed all the settings on that but it still does it.
You have a soft key down to the right for ending calls. The screen turns off so you can stick the phone between your shoulder and ear if you must do something with your hands while in a call and thus not click something with your ear or face
The same problem.
Tweak HD did not resolved this issiue. Any other ideas cause it's relly annoying from mu point of view
already discussed
this is aproblem discussed many many time, is an energy setting. with HD tweak i think you can solve problem. but when you are in a call and screen goes to sleep tap on the on/off button of the blackstone and your screen retake from sleep.
pitt1983 said:
this is aproblem discussed many many time, is an energy setting. with HD tweak i think you can solve problem.
Click to expand...
Click to collapse
I got Tweak HD and like I said before - it did not solve this problem
pitt1983 said:
when you are in a call and screen goes to sleep tap on the on/off button of the blackstone and your screen retake from sleep.
Click to expand...
Click to collapse
I belive we're looking for solution which doesn't involve any buttons
The best solution should be to use the "light sensor" to turn on the screen soon as we remove the phone to our ear
I have heard that S2U2 (freeware) automatically turns the screen off when a call is connected and then automatically turns the screen back on when the call is disconnected. If you want to use the screen during the call, you need to slide your finger on the screen to unlock it.
I'm not sure if this directly addresses your problem, but it might be an option to try out. I have never used S2U2, so unfortunately I cannot confirm what it can and can't do or how well it does what it does.
MonteCristoffOn said:
After searching all day long (and testing too)... Good news for #1.3! I've found it!!! (poor HTC guys who want to hide all their tweaks...)
So, I will publish a new version tonight with this and some other minor corrections.
Don't forget to ckeck it via AppToDate (thanks again Paul, for this great neat app).
Click to expand...
Click to collapse
from Tweak HD thread
Well, we will check it in the evening than
Hi,
As some of you may know I've recently got a HD2, and had a few gripes. Some have been issues with the phone, some have been just me not being used to HTC and/or Windows mobile. I must say the support on here has been nothing short of excellent
Anyway here are my remaining issues, I've searched for answers but can't find them. I have found other posts relating to my issues but not resolving them. I've tried wiki, and hints and tips.
1.Sometimes while making a call the screen turns back on and my ear presses all kinds of functions, and ultimately hangs up the call. I know a few people have had this issue, but has it been resolved, and if so how?
2.Sometimes when I'm typing and press 12# the cursor jumps to the middle of the text. Again I know a few people have had this issue, is there a fix? I must admit, I think I've noticed it happens more typing email rather than SMS.
3.And finally, the call volume. I find that the call volume is very loud and I have to have it on it's quietest setting, and still sometimes it distorts/crackles on certain words/letters, depending on how the person on the other end is talking. The other problem with having to turn the volume down is that when it's connected to my parrot handsfree in my car the call volume is too low and so have to turn it back up on the phone again.
Issues 1 & 3 are very irritating, and I must say pretty poor for a phone of this calibre. Issue 2 isn't major, but still annoying. Are there any fixes or workarounds for these????
snerkler said:
Hi,
As some of you may know I've recently got a HD2, and had a few gripes. Some have been issues with the phone, some have been just me not being used to HTC and/or Windows mobile. I must say the support on here has been nothing short of excellent
Anyway here are my remaining issues, I've searched for answers but can't find them. I have found other posts relating to my issues but not resolving them. I've tried wiki, and hints and tips.
1.Sometimes while making a call the screen turns back on and my ear presses all kinds of functions, and ultimately hangs up the call. I know a few people have had this issue, but has it been resolved, and if so how?
Click to expand...
Click to collapse
I never had this but read in other posts, that message receiving will activate the screen when set as wakup on.
snerkler said:
3.And finally, the call volume. I find that the call volume is very loud and I have to have it on it's quietest setting, and still sometimes it distorts/crackles on certain words/letters, depending on how the person on the other end is talking. The other problem with having to turn the volume down is that when it's connected to my parrot handsfree in my car the call volume is too low and so have to turn it back up on the phone again.
Click to expand...
Click to collapse
I also have the problem. what works for me is in a call, take phone from your ear adjust volume 2 clicks up and then completely down. this will reduce the volume in a call further when it was already set to mimimum. about the handsfree system i dont use that.
snerkler said:
2.Sometimes when I'm typing and press 12# the cursor jumps to the middle of the text. Again I know a few people have had this issue, is there a fix? I must admit, I think I've noticed it happens more typing email rather than SMS.
Click to expand...
Click to collapse
I get this too! I thought it was just me.
Hopefully there will be a fix soon, I never got it on the stock o2 ROM 1.43. So far I've only noticed it on the 1.61 ROM and 1.48 Rom WWE which Im using now.
wilcovh said:
I never had this but read in other posts, that message receiving will activate the screen when set as wakup on.
.
Click to expand...
Click to collapse
Do you mean the sceen will activate if there's an incoming message? Mine activates whether there's a message or not Where can I find the setting for wakeup on/off?
Also I'll try that trick with the call volume. Shouldn't have to do it though, bad flaw imo
snerkler said:
1.Sometimes while making a call the screen turns back on and my ear presses all kinds of functions, and ultimately hangs up the call. I know a few people have had this issue, but has it been resolved, and if so how?
2.Sometimes when I'm typing and press 12# the cursor jumps to the middle of the text. Again I know a few people have had this issue, is there a fix? I must admit, I think I've noticed it happens more typing email rather than SMS.
3.And finally, the call volume. I find that the call volume is very loud and I have to have it on it's quietest setting, and still sometimes it distorts/crackles on certain words/letters, depending on how the person on the other end is talking. The other problem with having to turn the volume down is that when it's connected to my parrot handsfree in my car the call volume is too low and so have to turn it back up on the phone again.
Click to expand...
Click to collapse
1. For some ppl, this is due to the hair intermittently covering the sensor. Would be cool to just press a button to turn of the screen in the call.
2. The new SMS-fix from HTC (released today?) apparently fixes this issue. There is a CAB available in one of the threads, if you are on a cooked ROM.
3. You can find a reg edit here to try: HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2". >One of them is "5"
ZekeWolf said:
1. For some ppl, this is due to the hair intermittently covering the sensor. Would be cool to just press a button to turn of the screen in the call.
2. The new SMS-fix from HTC (released today?) apparently fixes this issue. There is a CAB available in one of the threads, if you are on a cooked ROM.
3. You can find a reg edit here to try: HKCU\ControlPanel\SoundCategories\inCall AND InCall2
Change the value of InitVol to "2". >One of them is "5"
Click to expand...
Click to collapse
1. I don't think the hair issue is a problem for me lol
2. What is a cooked ROM?
3. Do you change InitVol to 2 on both, or just the one that's 5?
snerkler said:
1. I don't think the hair issue is a problem for me lol
2. What is a cooked ROM?
3. Do you change InitVol to 2 on both, or just the one that's 5?
Click to expand...
Click to collapse
2. A cooked ROM is one released by other source than HTC, normally newer versions of Betas, e.g. from one of the Chef:s here on XDA-developers.
3. 2 on both.
ZekeWolf said:
2. A cooked ROM is one released by other source than HTC, normally newer versions of Betas, e.g. from one of the Chef:s here on XDA-developers.
3. 2 on both.
Click to expand...
Click to collapse
OK, I've changed the initvol so will see how that works next time I take a call. Many thanks for your help
I have had issue 1 & 3. I upgraded to ROM 1.61 and that solved all of the issues that I had with my phone and also increased the speed too. Issue 3 was very annoying for me and I sent my phone back to o2 for a replacement and got the replacement yesterday. I imediately flashed to ROM 1.61 which solved any issues I had, but the crackling at high frequencies still remain. I guess I have to live with it until some fix comes out. The high call volume is still an issue.
snerkler said:
OK, I've changed the initvol so will see how that works next time I take a call. Many thanks for your help
Click to expand...
Click to collapse
Remember to soft reset
ZekeWolf said:
1. For some ppl, this is due to the hair intermittently covering the sensor.
...
3. You can find a reg edit here to try: HKCU\ControlPanel\SoundCategories\inCall AND InCall2"
Click to expand...
Click to collapse
1. The problem happend to me several time, but I have boldhead, so in my case hairs are innocent
I notices twice that screen light up when I have been calling someone and pickuping phone on the other side of the line was the trigger. But this could be of course just some kind of coincidence.
3. thanks for reg entry, this is the first real reason to modifie some entry at this phone, because my calls can hear people standing next to me
First of all ... update your radio and your ROM. From my experience Xannytech is the best so far, in terms of design and stability. I3v5y is also nice, but a lil bit more buggy (not his fault, it's WM6.5.3).
And what I really think on 2. is that you maybe press the cursor button. I think the keyboard from HTC is not really developed for capacitive screens. I heard TouchPal is quite good. I dont write that much so I dont need it
snerkler said:
Hi,
2.Sometimes when I'm typing and press 12# the cursor jumps to the middle of the text. Again I know a few people have had this issue, is there a fix? I must admit, I think I've noticed it happens more typing email rather than SMS.
?
Click to expand...
Click to collapse
Could it be the sensitivity of the touch screen ??
Ive had something similar with the sms on screen keyboard.
here is the thread to get the cab to reduce the sence of the screem . works for me with the On Screen Keyboard
http://forum.xda-developers.com/showpost.php?p=5071018&postcount=430
I've suffered from issue two and its deffinately not a case of fat fingers. After I noticed this happening I was very careful about where I was pressing, yet the cursor still jumped.
I've got around this by just using the long keypress to select icons from the normal qwerty keyboard.
On a similar line to this (and I think it may, fingers crossed, have been fixed in the latest update) is when you open an sms thread from the sense interface, if you start typing the XT9/ABC toggle is switched to XT9, yet the input is standard ABC, switching it back and forth still doesn't do anything!! Just another little thing I noticed.
When I make/receive a phone call, and it has the screen with "end call", "speakerphone" and all those buttons, the screen completely stops working, no button presses work. All I can do is use the hard buttons.
End call will work from the hard button, I can get to the home screen with the home button as well, and the touch screen starts working fine again.
I have a few reg tweaks, as well as BSB installed, I can't figure out what is doing it. It's kind of annoying cuz I can't use speakerphone.
It's also annoying that this has been asked about 20 times in the last week. A simple search would have brought you the answer, and I'm half tempted not to give you the answer and make you go search.
Anyway, in BsB Tweaks turn off "Tap Time".
Lol, thanks, I used the forum search and googled it. Searched for about ten minutes....
Apparently I wasn't searching using the right words...
Thanks for your help though.
russbustah said:
Lol, thanks, I used the forum search and googled it. Searched for about ten minutes....
Apparently I wasn't searching using the right words...
Thanks for your help though.
Click to expand...
Click to collapse
You're welcome. Just try searching a bit more in future. This is a MASSIVE forum so you probably won't find the answers immediately, and there's a lot of members that remind me of The Emperor from Star Wars. The Emperor is not as forgiving as I am
I have searched completely throughout this site and over on the tmobile hd2 forums to see if i could find any information on a resolution for this. I noticed a couple days back that the call screen wasnt working but all I was trying to do was to hang up the call. I just used the end call button instead. Today i was trying to make a payment through one of the IVR systems where I had to bring up the dialing pad and I was unable to. I have the stock tmobile wm with cookies home tab on top of it. Pardon me if this topic has already been addressed.
Same here
I too have the same problem. But i notice if i press the keypad button during call for a while, the keyboard eventually comes up, but not all the time. Any one with any suggetions?
turn off the 'increase tap time' tweak in bsbtweaks, (or remove the cab if you set that tap time tweak with a cab.)
That was it! Thank you, kind sir!
samsamuel said:
turn off the 'increase tap time' tweak in bsbtweaks, (or remove the cab if you set that tap time tweak with a cab.)
Click to expand...
Click to collapse
Yep that's it. I had to play with it for like 30 minutes 2 weeks ago before realizing that was the problem
Is was driving me crazy for quite a while. Now, the problem is gone.
Thanks !!!!!