Related
Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Yep, got exactly the same on my BMW 630....
Can t find any tweak but....
I am a heavy email user (thru BlackBerry connect) and I noticed that
the higher the number of messages stored, the higher disconnections appears.
At the same time, the TyTn is slower and slower....so my idea that this is related to some timeouts somewhere....
For your complete info, the MS bluetooth stack in my previuos S100 have able to.....immobilize my 630 !!!!!!!!! yes, incredible...
The MS stack messed up with the BMW bt ...and this later would stay ON for ever...even after switching car s power off.
This was sucking the car s battery untill the car would start !...
BMW could not reset the BT module unless disconnecting battery....but...then the active steering had to be re adjusted with the proper BMW computer...
This is a real story.
johnmclean said:
Hi all,
I know there are plenty of threads about the TyTN bluetooth issues, but my questions differs in two ways which I have yet to come across:
I do NOT have M$ VoiceCommander installed (and don't want to install it)
My bluetooth issue relates to my car's handsfree feature - my TyTN randomly connects and disconnects. Apparently Audis, VWs, BMWs, and Acura's all suffer from this this problem.
The situation:
When I start my car, the phone will successfully merge with my TyTN. Approximately 30 to 60 seconds later, the connection will be lost. Shortly after that the connection will re-establish itself, then it will disconnect itself a short period later. This pattern repeats endlessly.
I've tried each of the following Tweak programs but none have helped.
jetwaremobile
Tweak2k
HTweakC
I've heard that there is some kind of registry tweak that will prevent the bluetooth stack from disconnecting from my car's handsfree feature, but after looking for about 2 days now, I can't find it. Can anyone help?
thanks.
jm
Click to expand...
Click to collapse
I have the same problem with a CK3100 kit, don't have a solution, but would like one, didn't have this problem with a Jasjar nor Wizard
TyTN bluetooth | random disconnect when using car handsfree - more details
Thanks for the replies so far.
Although the following thread did not help me with my problem, it might help one of you. If you're having problems mostly related to issuing voice commands using M$ VoiceCommander, I think there *might* be a solution in that other thread for you.
Just to reiterate my problem; my TyTN keeps randomly connecting and disconnecting from my car's built-in hands free bluetooth device.
There was a time when if i managed to made a call after first starting the car - before the first random disconnect - the phone would remain connected until the next time I started the car. That no longer appears to be the case.
-jm
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Has anyone tried a ROM with aku 3.3?
jasonrhcastle said:
Has anyone tried a ROM with aku 3.3?
Click to expand...
Click to collapse
Yes.
And on my CK3100 I now no longer get disconnects. I did have to uninstall jetware as it wasn't reliable. My TyTN now connects perfectly and no longer drops.
One thing I did find is that the TyTN hates it when more than one handsfree device is in its trusted list. Make sure that the ck3100 is the only handsfree device paired.
http://forum.xda-developers.com/showthread.php?t=247520&highlight=bluetooth+keeps+disconnecting
ajax007 said:
I solved the BT problem with my Orange SPV M3100 by setting it to never switch off the display automatically (only switching off the backlight after 20 seconds or so). I also use an in-car charger to power the TyTN. The car is an A6 with RNS-E (BT enabled) and TyTN works fine and never loses the BT connection as long as the display is active.
This is a mid-term solution though and I'm still eagerly waiting for a ROM update that will solve the problem for good.
Click to expand...
Click to collapse
I've tried changing the automatic switch off setting and it made no difference on my SPV M3100 (with Parrot CK3100) - I reckon that the external power is what fixed your problem (this has worked for others too).
Sadly it's not a convenient fix as I like to leave my phone in my pocket when I'm in and out of the car. Orange say there is no 'issue' so there's no sign of a ROM update but HTC know of the problem but I have to wait for Orange to release their ROM update. I can't use the HTC update. If only us Orange users could tell them enough times they might listen now that some AKU 3.3s are being released. Orange technical department won't speak to end users like me - they have actually refused to discuss it with me and just pass messages back and forth from customer relations. Any other ideas?
A solution - thanks to Parrot
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
587dan said:
Yippee - thanks to Parrot I have got a solution to the TYTN / CK3100 problem (my phone is the Orange SPV M3100).
As Orange and HTC can't find any solution I kept asking Parrot for ideas. Their excellent customer service department tried various settings which made no difference until I was offered a trial of some beta test software called VCF creator. Once you have the VCF from the PC's Outlook you just need to beam it by BT across to the CK3100 and alter some settings (takes 5 minutes maximum). The small sacrifice is that you don't have auto-synchronisation so if your numbers change a lot you will need to do another VCF upload. The extra bonus benefit is that all your numbers will be grouped together. So, for example, you access someones name and then you can see their mobile/home/work number rather than having a separate line in the main list for each phone number. The problem is a result of how Windows Mobile phones provide the data. With this bonus you can then use voice activation to input a name followed by a keyword mobile, home, work etc. Fantastic!
Click to expand...
Click to collapse
If you use the Jetware BT software you can do the same thing e.g. beam the whole contact list in one go and then set the Parrot to not sync by choosing the Ericsson No Sync profile. This is how I have mine set up, also with the Jetware software it sends over the Service Provider, Battery and Signal strength settings to the Parrot, something which the native stack doesnt do.
Solution for this
Hey all, i have purchased a parrot 3100, the software in it was 1.6, i had the same problems but it's greatly and successfully solved using the new jetware 1.3 . i don't know if i can post some linx here, but here you go, if this is illegal for this site please remove them
http://rapidshare.com/files/30296941/JetWare_1.3.rar
http://www.megaupload.com/?d=PL5UX5KC
Hi.
I am having problems with the mute and communication with a Parrot CK3100 handsfree. Either it doesn't mute the car music equipment nor receives the voice from the Niki, sometimes both sympthoms at the same time. Any idea about the reason?. I have upgraded the Parrot version to the latest one.
Thanks for the help.
There is know problem with Parrot handsfree and touch. I had a problem with htc touch dual and parrot MK6000. After contact with parrot support I got sollution. It works know. If you are stil looking for fix let me know I can search the link I got.
In short you doe following (remove first all pairings betwee your parrot and touch):
1. pair with some other bluethooth phone (I used nokia 6230).
2 disconnect first phone (shoot down bluethooth).
3. now pair with your touch.
Seems very rear but it works wel.
We have the CK3100 running the latest firmware.
The only problems we have had is the occasional ghost call when starting the car.
The kit will just say Call in progress, but nothing on the phone and it is not actually dialing.
A reboot of the phone fixes it.
I also have the same issue with My Kaiser witht he 3100 and the 3400 GPS in my car.
Same problem for me with parrot rytm'n blue
i'll try this solution...pairing with other model....
Thanks for the answers, will follow asmanm recomendations to see if it works and post results (fingers crossed...)
sancarabo said:
Thanks for the answers, will follow asmanm recomendations to see if it works and post results (fingers crossed...)
Click to expand...
Click to collapse
Hi.
IT WORKS with some restrictions!!
What I did:
1) I paired my old but reliable Nokia 6310i with the Parrot CK3100.
2) Switched off the Nokia BT.
3) Paired the HTC Dual and done.
Problems:
1) I got the ghost call when I enter into the car but after some minutes dissapears.
2) Sometimes gets crazy and hungs, mainly when I dial from the Parrot. If you dial from the phone, then no problems.
Hope it helps.
sancarabo said:
Hi.
IT WORKS with some restrictions!!
What I did:
1) I paired my old but reliable Nokia 6310i with the Parrot CK3100.
2) Switched off the Nokia BT.
3) Paired the HTC Dual and done.
Problems:
1) I got the ghost call when I enter into the car but after some minutes dissapears.
2) Sometimes gets crazy and hungs, mainly when I dial from the Parrot. If you dial from the phone, then no problems.
Hope it helps.
Click to expand...
Click to collapse
Hi .. I use the Dual with both CK3100 and LS3200. It works flawlessly. At first I had same issue with a ghost call just after connection: I solved it completely just activating the flag under [programs] --> SAP Settings.
problem with minikit
Hi all,
I have a problem with the dual touch and the parrot minikit.
- the connection between the two devices is ok
- when I'm called or I call someone, I hear very well my correspondants but they don't hear me, I have to use the mute mode and use my phone to continue the discussion.
I have already tested the solution purposed on this thread but it doesn't work aith my dual touch
F6Typhoon said:
We have the CK3100 running the latest firmware.
The only problems we have had is the occasional ghost call when starting the car.
The kit will just say Call in progress, but nothing on the phone and it is not actually dialing.
A reboot of the phone fixes it.
I also have the same issue with My Kaiser witht he 3100 and the 3400 GPS in my car.
Click to expand...
Click to collapse
same prob here
got touch dual w mk6100
it doesnt work pretty good.
the ghost call happens once in a while, but can be repaired w a call and hung. its fast.
sometimes i can hear some interferences when listening to music.
to make better calls i prefer to use the voice dialing from the dual. pressing the green button on remote control mk6100 starts the voice dialing in the dual. didnt try the mk6100 though.
it is very important the parrot disconect, i had some issues coz it didnt say "bye", pretty stupid but it is important.
i still have some issues w the 100ms stop music. (music stops every now and then for less than a second)
i gotta say they dont hear me pretty good. dont know why yet.
till searching on satparrot.com
I too am having trouble connecting with CK3100.
emailed HTC Australia who were less than helpful, with this :-
"Bluetooth should be universal or is marketed as universal although it is far
from the truth. Certain chipsets conflict or are incompatible with others. If a
device is not fully compatible it will not offer all features or possibly not
connect at all.
This is hardware related and not a software issue. This will not be effected by future update for the handset."
Parrot were more use, with this :-
"Hello sir ,
Indeed we notice several compatibility issues with ck3100 and htc touch dual
That's why we haven't listed this phone in our compatibilty list
Our technical engineers are currently on this issue inorder to find the solutions , when it be solved this phone will be listed at this adress below :
http://www.parrot.com/documents/en/support/ck3100_notes_new.txt
Moreover we have several feedbacks from our clients , who informed us that windows mobile 6 works better with ck 31OO software version
4.15
if you are intrested you can use 4.15 software version which is in enclosed mail"
Will try when I have time.
Tom
osmanm said:
There is know problem with Parrot handsfree and touch. I had a problem with htc touch dual and parrot MK6000. After contact with parrot support I got sollution. It works know. If you are stil looking for fix let me know I can search the link I got.
In short you doe following (remove first all pairings betwee your parrot and touch):
1. pair with some other bluethooth phone (I used nokia 6230).
2 disconnect first phone (shoot down bluethooth).
3. now pair with your touch.
Seems very rear but it works wel.
Click to expand...
Click to collapse
OSMANN,
I need any clarification regarding you procedure:
1. pair with some other bluethooth phone (I used nokia 6230).(Ok done)
2 disconnect first phone (shoot down bluethooth);means:leave other phone pair on kit car parrot but turn off the bluetooth on other device or what else....:
1)switch the connection from Other device to HTC Dual (leaving the connection beetwin kit car parrot and other device )
2)Remove the connection pair between other device and Parrot
3. now pair with your touch.(ok done)
please let me know your comments
parrot CK3100
can anybody tell me how to pair Blackberry Bold 9700 to the parrot ihave tryed everything the phone can fined the parrot but the parrot won,t accepet it
mickwillo said:
can anybody tell me how to pair Blackberry Bold 9700 to the parrot ihave tryed everything the phone can fined the parrot but the parrot won,t accepet it
Click to expand...
Click to collapse
Delete all the paired devices listed in the Parrot, and try again.
Regards
I can connect the HD2 to my new MINI with bluetooth carkit fine via headset profile.
However, the phonebook does not sync with the car.
Ir worked fine with the HD with the Microsoft bluetooth-stack.
Is there any solution for that?
bill340 said:
I can connect the HD2 to my new MINI with bluetooth carkit fine via headset profile.
However, the phonebook does not sync with the car.
Ir worked fine with the HD with the Microsoft bluetooth-stack.
Is there any solution for that?
Click to expand...
Click to collapse
With TouchHD i did sync Phonebook to my nissan car without problems (winmobile 6.1)
I think this program will work on HD2 also (winmobile 6.5)
http://www.handango.com/catalog/ProductDetails.jsp?productId=183981&platformId=30
regards nico
No, that does not help.
With this app you can only send contacts and so on to another device.
But here, everytime you connect the device via bluetooth with the car, the car should read the contacts from the phone.
That worked without problems with the microsoft-stack.
I am having a similar issue, paired phone with Mercedes HFP and first time contacts came across. Next time back in the car and it reconnects, the contact memory is empty? Can still make and receive calls but no contacts. If I re-pair the phone by resetting HFP in car then contacts come across? Software issue on phone or car kit driver issue? Previously had HTC S710 and had no problems. Very annoying so any help would be appreciated.
Thanks
Same here - I even ca`nnot get the car be paired with HD2 - why ?
Hello,
here is my issue with the BT connection: I have a Pioneer F900BT unit in my car. With my previous Nokia E66 everything worked just fine.
Now, when connecting with HD2, connection works ok, phonebook is downloaded ok, BUT: when there is a call, the music in the car is not silenced automatically; what's worse, it seems the phone doesn't send any call identification to the headunit, since all the history (outgoing, incoming calls) is empty. So, I cannot redial or see who's calling me.
I did try the fix in the registry described on another thread (setting HKLM\Software\Microsoft\Bluetooth\sys\COD=5374476, but it doesn't help.
Any idea?
Thank you.
It works perfectly with my Mercedes Command with Bluetooth Adapter, it does not transfer all of my 800 contacts because it use to make a new entry for each tel. number (Home / Works, etc.) therefore it says "memory full" at about 75% but I can understand. At least I can call/recognize up to the "S" beginning contacts.
Anyhow, since I used to have this problem in the past, you could try Jetware, it worked for me with my Cruise.
dfulgo said:
It works perfectly with my Mercedes Command with Bluetooth Adapter, it does not transfer all of my 800 contacts because it use to make a new entry for each tel. number (Home / Works, etc.) therefore it says "memory full" at about 75% but I can understand. At least I can call/recognize up to the "S" beginning contacts.
Anyhow, since I used to have this problem in the past, you could try Jetware, it worked for me with my Cruise.
Click to expand...
Click to collapse
Jetware unfortunatly does not work with the widcomm-stack used in the HD2.
jma050 said:
I am having a similar issue, paired phone with Mercedes HFP and first time contacts came across. Next time back in the car and it reconnects, the contact memory is empty? Can still make and receive calls but no contacts. If I re-pair the phone by resetting HFP in car then contacts come across? Software issue on phone or car kit driver issue? Previously had HTC S710 and had no problems. Very annoying so any help would be appreciated.
Thanks
Click to expand...
Click to collapse
To follow up, I have found that its the pin lock (mentioned in another thread) that is causing the problem. If you unlock your phone before you pair up then contacts are coming across every time. May not work for everyone if their problem is different but has for me so wanted to share. If anyone knows how to bypass security issue with paired device I would like to know but as a workaround its better than no contacts!
I have this problem with my BMW iDrive too. No problems getting the address data on the HD but not working for me on the HD2. Can pair and make calls though. Any solution?
phonebook does not sync
I have a BMW with the bluetooth feature. From what I have noticed there is a connection started to the phonebook and it starts sending (and receving some) information but after about 110k it stoppes and the phonebook is disconnected. I would be happy to assist in any further analysis if anybody has any ideas.
I have no problem making and receiving calls in through this setup, but, as stated, the connection to the phonebook is not possbile. This was previously possible throgh the HD
//Awi
aszotten said:
I have a BMW with the bluetooth feature. From what I have noticed there is a connection started to the phonebook and it starts sending (and receving some) information but after about 110k it stoppes and the phonebook is disconnected. I would be happy to assist in any further analysis if anybody has any ideas.
I have no problem making and receiving calls in through this setup, but, as stated, the connection to the phonebook is not possbile. This was previously possible throgh the HD
//Awi
Click to expand...
Click to collapse
read my previous reply, its because your phone is locked whn it connects. If you unlock it before you pair up it should work.
jma050 said:
read my previous reply, its because your phone is locked whn it connects. If you unlock it before you pair up it should work.
Click to expand...
Click to collapse
OK. I tried to just unlock it, but this did not work. I will try to unpair, then unlock and then pair again, and see if this then works.
//Awi
Did not work ...
aszotten said:
OK. I tried to just unlock it, but this did not work. I will try to unpair, then unlock and then pair again, and see if this then works.
//Awi
Click to expand...
Click to collapse
Well, unfortunately it did not work. I unpaired the phone from the carkit, then removed the pin on the phone, did a soft reset, paired the phone with the carkit and saw that it started communicating with the phone book, but the communication stopped after about 110kb, as it usually does, and the phonebook was then disconnected.
Any ideas anyone?
//Awi
Same issue
I'm facing the same issue... New Mercedes, phone calls are no problem but phonebook is not accessible... I doubt that it's a lock issue... When I paired it it also didn't work but there it was certainly unlocked...
jma050 said:
To follow up, I have found that its the pin lock (mentioned in another thread) that is causing the problem. If you unlock your phone before you pair up then contacts are coming across every time. May not work for everyone if their problem is different but has for me so wanted to share. If anyone knows how to bypass security issue with paired device I would like to know but as a workaround its better than no contacts!
Click to expand...
Click to collapse
can you please direct me in the right direction...what are you refering to here?
please help
I upgraded my Vodafone HD2 to Rom 1.66 this week and have noticed many improvements, however the phone is now not operating correctly with my Range Rover.
When I select a number to dial from the phone book the radio is not cut off when dialling. The phone shows dialling then connected but neither party can hear each other when the call is connected.
My phone and the car both worked Ok on the Vodafone stock ROM. I have also connected it to a BMW idrive and as previously 1.66 still works for this.
I have now had a response from HTC re this issue. It looks like this is a 1.66 issue that was working on the Vodafone 1.43 ROM. I now cannot make or receive calls in the car!
New Response From [ Richard (UK - Ireland Support (Tech)) ]
Dear customer,
HTC knows about this issue, and we are working to build the hot fix to the bluetooth connection with the car kit. At the moment, HTC does not have any informatiuon when this will be available to download from HTC web site. We recommend to the customers to keep monitoring the web site for future updates.
Best regards,
HTC customer support team
HTC Corp. Global Service Division
Call Center at on +44 8458900079
roll back to the VF 1.43 ROM then...
EddyOS said:
roll back to the VF 1.43 ROM then...
Click to expand...
Click to collapse
I think I will wait for a solution rather than going back. 1.66 allows me to compile text messages and emails in under 5 minutes and makes the phone finally usable!
if you find a solution please post it here, because i am desperatly looking for an answer
I am mystified! I drove the Range Rover today for the first time in a month and the phone rang. Call was OK and afterwards made other calls.
Other than delete the call register I can think of nothing else I have changed or done on the HD2 to make this work.
Rich63 said:
I am mystified! I drove the Range Rover today for the first time in a month and the phone rang. Call was OK and afterwards made other calls.
Other than delete the call register I can think of nothing else I have changed or done on the HD2 to make this work.
Click to expand...
Click to collapse
been there...when I back to the car in 15 min without changing anything on the phone or car, I was back to square one
that is what drives me mad already - sometimes it DOES WORK
Similar kind of Bluetooth issues on Ford In-Car bluetooth
I have a similar issue with my phone not disconnecting from a call.. (ok not similar but a bluetooth issue nonetheless) with Ford Covers+
seems to be hit or miss whether it disconnects.. i have to literally soft reset the phone and sometimes soft reset my car to get it working again!!
would be interesting when HTC send this FIX out..
nutmegy said:
I have a similar issue with my phone not disconnecting from a call.. (ok not similar but a bluetooth issue nonetheless) with Ford Covers+
seems to be hit or miss whether it disconnects.. i have to literally soft reset the phone and sometimes soft reset my car to get it working again!!
would be interesting when HTC send this FIX out..
Click to expand...
Click to collapse
well my phone is a Toshiba TG01 so it might not be HTC issue, but WM 6.5
I think I am onto something here:
if the BT is switched on after I start the car, everything works perfect!
the only inconvinience now is switching BT on/off for each jorney (especially annoying during short trips with short stops - to the local shop, post office etc)
Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
I have exactly the same issue. The HTC HD2 works ok for calls etc but the phone book upload is "please wait" forever. Very annoying. I have the standard up to date ROM and BMW X5 2009 model. Any help would be great.
Thanks
mrickenbach said:
Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
Click to expand...
Click to collapse
So any ideas? Now we are already two you can make happy! Thanks
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
HD2_Noob said:
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
Click to expand...
Click to collapse
I have a 2008 BMW, and I did experience this the first time..I sat there waiting for a few mins adn then got bored...but after I had turned the car off, been away and come back..it transferred straightaway.
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Works fine here with a BMW 5x from 2008.. Using miris 6.5.x ROM
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Click to expand...
Click to collapse
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
schrej said:
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
Click to expand...
Click to collapse
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
bmw
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Which ROM do you use 1.66? or earlier? With my earlier ROM I had no problems, but since I upgraded to 1.66 (German), the phonebook does not transfer...
Bluetooth auto control problem
I can’t control my bluetooth (on/off) when using Inesoft phone profiles/controls; I have also tried other programs but no success(in another program the window of bluetooth was disabled); through all programs, I could control phone, WIFI, and gprs but not the Bluetooth. The only way to turn the Bluetooth on/ off is the Comm Manager (Manually); could anyone help please. Thanks
2006 bmw
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
zipolly said:
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
Click to expand...
Click to collapse
thank you, I am glad it worked for you...you must have a newer generation ULF than me then.
Is your phone HD2? mine is Toshiba TG01..I have managed to make it work 50/50 of the times, but I do not know WHAT CHANGES are between it working and not working...it is very frustating to know (and experience it working) that it can/should work, but not being able to
I have a new HTC Mini HD and have the same problems with my 2009 BMW 3. BT Headset function works just fine, but iDrive keeps trying to sync the telephone book, unsuccesfull. Instead, my phone's battery gets drained. Anyone any sollutions?
Unfortunately I don't have an answer for your question, but it sounds like it might have something to do with the bluetooth stack used for that ROM/Radio not being recognized by the car. Perhaps the layer that deals with data transfer is removed. Sorry I can't be of more help here.
What I can do to help is to offer a warning. I am a former BMW Client Advisor, and have been told many, many times by service technicians that using phones which are not specifically approved by BMW can affect your car's ECU (brain) and if it needs to be repaired or replaced, it will not be covered under warranty. That could be just nonsense to force you into buying only phones which BMW has tested (or vendors have paid for a marketing fee), or it might be spot on, in which case you run a pretty big risk.
Hope this helps.
OK, problem solved. BMW updated my carsoftware to its newest version last week and now my HD2 works perfectly with my car (again). I can make calls AND my phonebook is synced as well.
Hint1: Try if your phonebook sync problem exists with the SIM contacts as well as with the phone contacts
Hint 2: worldwideweb.bmw.com/com/de/owners/navigation/bluetooth/compatibility_check_intro.html
a_petrov303 said:
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
Click to expand...
Click to collapse
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Hi All,
I have a BMW X5 2005 model. I can pair the phone OK but it constantly disconnects and reconnects once the transfer of the phonebook occurs. The phonebook transfers always start from scratch when this happens and nothing gets loaded to the car's phonebook.
If a call comes in, or if I make a call while it is connected (like within 5 seconds) the phone stays connected for the duration of the call.
I have tried all the Regisrty tweaks and none change the behaviour.
I also read it is because the HD2 uses Widcomm BT stack and not the MS BT Stack.
Zippolly and a_petrov303 and all those that have it working, can you please tell me which Rom you are using? I am using the latest Energy's 6.5.x rom. i noticed someone mentioned Miri's 6.5.x Rom works.
Thanks,
Rob
I have a 07 E60. The HD2 pairs fine, synchs contacts fine, but the sound quality is so bad it's not useable. Of course bmw says it's not a compatible phone, but I think there is a problem with the car as my Diamond won't find it, even though it is supposed to be supported
its mainly due to the car bluetooth, BMW etc don't make the car kit mostly siemens do and they are slow on the uptake of doing updates.
anybody found a snap-in for the hd2 yet?
I have a 7-series F01 and it is really annoying to have to deal with that usb cable...
Ontopic
I had the BT problem too, deleting the profile and repairing the phone did the trick for me...