Hi.
I am having problems with the mute and communication with a Parrot CK3100 handsfree. Either it doesn't mute the car music equipment nor receives the voice from the Niki, sometimes both sympthoms at the same time. Any idea about the reason?. I have upgraded the Parrot version to the latest one.
Thanks for the help.
There is know problem with Parrot handsfree and touch. I had a problem with htc touch dual and parrot MK6000. After contact with parrot support I got sollution. It works know. If you are stil looking for fix let me know I can search the link I got.
In short you doe following (remove first all pairings betwee your parrot and touch):
1. pair with some other bluethooth phone (I used nokia 6230).
2 disconnect first phone (shoot down bluethooth).
3. now pair with your touch.
Seems very rear but it works wel.
We have the CK3100 running the latest firmware.
The only problems we have had is the occasional ghost call when starting the car.
The kit will just say Call in progress, but nothing on the phone and it is not actually dialing.
A reboot of the phone fixes it.
I also have the same issue with My Kaiser witht he 3100 and the 3400 GPS in my car.
Same problem for me with parrot rytm'n blue
i'll try this solution...pairing with other model....
Thanks for the answers, will follow asmanm recomendations to see if it works and post results (fingers crossed...)
sancarabo said:
Thanks for the answers, will follow asmanm recomendations to see if it works and post results (fingers crossed...)
Click to expand...
Click to collapse
Hi.
IT WORKS with some restrictions!!
What I did:
1) I paired my old but reliable Nokia 6310i with the Parrot CK3100.
2) Switched off the Nokia BT.
3) Paired the HTC Dual and done.
Problems:
1) I got the ghost call when I enter into the car but after some minutes dissapears.
2) Sometimes gets crazy and hungs, mainly when I dial from the Parrot. If you dial from the phone, then no problems.
Hope it helps.
sancarabo said:
Hi.
IT WORKS with some restrictions!!
What I did:
1) I paired my old but reliable Nokia 6310i with the Parrot CK3100.
2) Switched off the Nokia BT.
3) Paired the HTC Dual and done.
Problems:
1) I got the ghost call when I enter into the car but after some minutes dissapears.
2) Sometimes gets crazy and hungs, mainly when I dial from the Parrot. If you dial from the phone, then no problems.
Hope it helps.
Click to expand...
Click to collapse
Hi .. I use the Dual with both CK3100 and LS3200. It works flawlessly. At first I had same issue with a ghost call just after connection: I solved it completely just activating the flag under [programs] --> SAP Settings.
problem with minikit
Hi all,
I have a problem with the dual touch and the parrot minikit.
- the connection between the two devices is ok
- when I'm called or I call someone, I hear very well my correspondants but they don't hear me, I have to use the mute mode and use my phone to continue the discussion.
I have already tested the solution purposed on this thread but it doesn't work aith my dual touch
F6Typhoon said:
We have the CK3100 running the latest firmware.
The only problems we have had is the occasional ghost call when starting the car.
The kit will just say Call in progress, but nothing on the phone and it is not actually dialing.
A reboot of the phone fixes it.
I also have the same issue with My Kaiser witht he 3100 and the 3400 GPS in my car.
Click to expand...
Click to collapse
same prob here
got touch dual w mk6100
it doesnt work pretty good.
the ghost call happens once in a while, but can be repaired w a call and hung. its fast.
sometimes i can hear some interferences when listening to music.
to make better calls i prefer to use the voice dialing from the dual. pressing the green button on remote control mk6100 starts the voice dialing in the dual. didnt try the mk6100 though.
it is very important the parrot disconect, i had some issues coz it didnt say "bye", pretty stupid but it is important.
i still have some issues w the 100ms stop music. (music stops every now and then for less than a second)
i gotta say they dont hear me pretty good. dont know why yet.
till searching on satparrot.com
I too am having trouble connecting with CK3100.
emailed HTC Australia who were less than helpful, with this :-
"Bluetooth should be universal or is marketed as universal although it is far
from the truth. Certain chipsets conflict or are incompatible with others. If a
device is not fully compatible it will not offer all features or possibly not
connect at all.
This is hardware related and not a software issue. This will not be effected by future update for the handset."
Parrot were more use, with this :-
"Hello sir ,
Indeed we notice several compatibility issues with ck3100 and htc touch dual
That's why we haven't listed this phone in our compatibilty list
Our technical engineers are currently on this issue inorder to find the solutions , when it be solved this phone will be listed at this adress below :
http://www.parrot.com/documents/en/support/ck3100_notes_new.txt
Moreover we have several feedbacks from our clients , who informed us that windows mobile 6 works better with ck 31OO software version
4.15
if you are intrested you can use 4.15 software version which is in enclosed mail"
Will try when I have time.
Tom
osmanm said:
There is know problem with Parrot handsfree and touch. I had a problem with htc touch dual and parrot MK6000. After contact with parrot support I got sollution. It works know. If you are stil looking for fix let me know I can search the link I got.
In short you doe following (remove first all pairings betwee your parrot and touch):
1. pair with some other bluethooth phone (I used nokia 6230).
2 disconnect first phone (shoot down bluethooth).
3. now pair with your touch.
Seems very rear but it works wel.
Click to expand...
Click to collapse
OSMANN,
I need any clarification regarding you procedure:
1. pair with some other bluethooth phone (I used nokia 6230).(Ok done)
2 disconnect first phone (shoot down bluethooth);means:leave other phone pair on kit car parrot but turn off the bluetooth on other device or what else....:
1)switch the connection from Other device to HTC Dual (leaving the connection beetwin kit car parrot and other device )
2)Remove the connection pair between other device and Parrot
3. now pair with your touch.(ok done)
please let me know your comments
parrot CK3100
can anybody tell me how to pair Blackberry Bold 9700 to the parrot ihave tryed everything the phone can fined the parrot but the parrot won,t accepet it
mickwillo said:
can anybody tell me how to pair Blackberry Bold 9700 to the parrot ihave tryed everything the phone can fined the parrot but the parrot won,t accepet it
Click to expand...
Click to collapse
Delete all the paired devices listed in the Parrot, and try again.
Regards
Related
hi.. i hve a skoda, octavia 2, it has factory installed bluetooth car kit, i can easily connect my Herms , but it keeps disconnecting and reconnecting every few minutes, I tried to upgared to WM6 and its same, I cange my bluetooth control unit at Skoda , and its same. the car kit works fine on any other phones like Nokia or SE. the problem is only with HTC devices. any idea ?
not a single reply !!!
This is a common problem with the TyTn, there are plenty of other threads here with exactly the same problem. I have a Parrot C3000 Evolution car kit and am using a LVSW WM6 ROM (see sig) which works most of the time (better than other ROMs in my experience) - although I experience the following all the time;
Bluetooth turns itself off (on the TyTn)
Bluetooth is on, but the phone won't connect to the car kit
Connection to the car kit gets lost after making a call
Connection to the car kit gets lost when dialling a number
In most cases going to connection manager and turning bluetooth off then on usually works, sometimes (rarely) I have to soft reset the phone and once in a while I have to soft reset the phone and the car(!). When it does all connect it works very well, I also use MS Voice Command and with the various fixes applied I get announcements, voice dialing etc. all working perfectly.
My problems with bluetooth are limited to the car kit though, I also have a TomTom bluetooth GPS dongle which works perfect all the time.
thanks forza
thanks a lot, at least I don't feel lonley with my problem.
i found this, which works great with my car kit.
www.jetwaremobile.com it costs, but there is a 30 day trial to see if it will work with your car kit.
m15chief said:
i found this, which works great with my car kit.
www.jetwaremobile.com it costs, but there is a 30 day trial to see if it will work with your car kit.
Click to expand...
Click to collapse
can you please advise how to setup the jetware ??
forza said:
This is a common problem with the TyTn, there are plenty of other threads here with exactly the same problem. I have a Parrot C3000 Evolution car kit and am using a LVSW WM6 ROM (see sig) which works most of the time (better than other ROMs in my experience) - although I experience the following all the time;
Bluetooth turns itself off (on the TyTn)
Bluetooth is on, but the phone won't connect to the car kit
Connection to the car kit gets lost after making a call
Connection to the car kit gets lost when dialling a number
In most cases going to connection manager and turning bluetooth off then on usually works, sometimes (rarely) I have to soft reset the phone and once in a while I have to soft reset the phone and the car(!). When it does all connect it works very well, I also use MS Voice Command and with the various fixes applied I get announcements, voice dialing etc. all working perfectly.
My problems with bluetooth are limited to the car kit though, I also have a TomTom bluetooth GPS dongle which works perfect all the time.
Click to expand...
Click to collapse
I have found that my 3200LS Color works great as long as I have unlocked my phone BEFORE turning ignition on. Have you updated your Parot firmware to latest version?
timbouk said:
I have found that my 3200LS Color works great as long as I have unlocked my phone BEFORE turning ignition on. Have you updated your Parot firmware to latest version?
Click to expand...
Click to collapse
Firmware is the latest version for my device, but will try unlocking as you suggest and see how that goes, thanks for the tip.
parrot ck3100 and spv m3100 with wm6 dutty v2... it works perfect... i had black 3.0.1... it all went well untill a call in or out was made... but with dutty v2 it is al perfect... i am amezed myself when i see all the problems others have...
Well....
I happiness owner of XDA Orbit 2 (same as HTC Polaris at other form factor).
All work very fine, but one thing just kill me.
Orbit not work propertly with BT handset (Jabra JX10). I tried all posible ROMs: Bepe, BlackWidow, Rus 6.1, original HTC Polaris (WM6.0), original Germany ROM from O2. With all ROM behavior of BT handset was the same:
1. HardReset
2. Search BT device and connect it
3. Tried make call to anybody (I call to my second phone, but it doest matter)
4. First 1-2 calls all good. Sound good, mic work.
5. Tried incoming call.
6. At handset normal alarm tone, press button and..... first 2-3 sec normal sound good - then just noise (as white noise) and mic blocked.
7. All other calls like char.6. Noise after 2-3 sec.
I tried to changed all posible value. BitPool, BitRate, WaveDev and all other.... Tried stoped many service who can block BT (OBEX, ActiveSync via BT). Nothing change.
I think about hardware malfunction, but when I tried connect other BT device like external GPS reciever or HP notebook - I get normal work via BlueTooth. So, it mean hardware of bluetoth works good and with BT not work only handset.
Please, help me.
I got the same problem, but slightly different: the first 2-3 phonecalls are perfect, then there will be no sound. I tried with my 2 blue tooth headser.
with my headset, it happens 2-3 tims also.
But I met once the phone is not working when I trying normal phonecall without BT ot any headset.
I tried different ROM, it remains the same.
Similar problems with HF Jabra SP5050
Hands-free functioning with my previous cheep Nokia was excellent. Now the same Jabra SP5050 with Polaris: TRAGEDY !!!
qinyugang said:
I got the same problem, but slightly different: the first 2-3 phonecalls are perfect, then there will be no sound. I tried with my 2 blue tooth headser.
with my headset, it happens 2-3 tims also.
But I met once the phone is not working when I trying normal phonecall without BT ot any headset.
I tried different ROM, it remains the same.
Click to expand...
Click to collapse
That is.
I tried all BT headset which I have, it Jabra JX10 and Jabra BT10. The same....
Janhura said:
Hands-free functioning with my previous cheep Nokia was excellent. Now the same Jabra SP5050 with Polaris: TRAGEDY !!!
Click to expand...
Click to collapse
You mean Nokia BT handset worked with Polaris very well?
What model name its handset? I try to test with my smartphone.
updt. It seems I understood what you mean. So, it my situation. Both Jabra BT headset works good with all my Nokia phones and not work with Orbit 2 (Polaris).
Henry_Lee & others:
Try turn off and on again (5 sec later) Bluetooth on Your Polaris when headset is on. Is it working?
Do it every time you start using headset. Need patch from HTC.
dj_nsk said:
Henry_Lee & others:
Try turn off and on again (5 sec later) Bluetooth on Your Polaris when headset is on. Is it working?
Do it every time you start using headset. Need patch from HTC.
Click to expand...
Click to collapse
Yep, its work. Thanks for that. But it black magic and not good solution.
updt. It work until to first sleep (power button) longer than 5-10 min.
Then again needed reboot BT on device. F...k.
So you said you tried all kinds of ROMs. There are some ROMs out there which include the test version of the Radio ROM. I'm a strong believer of the thought, that the Bluetooth part of the test Radio is flawed and leads to results like the one you suffer.
If I were you, I'd check my Radio ROM version and if it doesnt match the shipping one (which tops out at 1.58.21.23) I'd search for that version and flash it. After the flash, a Hardreset might not be the wrong thing to do.
schaggo said:
So you said you tried all kinds of ROMs. There are some ROMs out there which include the test version of the Radio ROM. I'm a strong believer of the thought, that the Bluetooth part of the test Radio is flawed and leads to results like the one you suffer.
If I were you, I'd check my Radio ROM version and if it doesnt match the shipping one (which tops out at 1.58.21.23) I'd search for that version and flash it. After the flash, a Hardreset might not be the wrong thing to do.
Click to expand...
Click to collapse
I wrote later that I tried flash original ROM for O2 Orbit 2. It ROM contain radio 21.23. And nothing changes.
But, I not wish change radio ROM. Last radio ROM very well and good quality of GSM and fast GPS more important for me. The more so because, BT still not work.
up.....
At me and many my friends (with Cruis) a similar problem. The first, second call - all is good. Then - break of BT communication. Works with SE is better, the Jabra is worse
andykha said:
At me and many my friends (with Cruis) a similar problem. The first, second call - all is good. Then - break of BT communication. Works with SE is better, the Jabra is worse
Click to expand...
Click to collapse
Yep, tha same ****.
Today I tried Motorola H680, it good work with O2....
I think, Orbit2 or Polaris not work with BT headset with bluetooth version 1.1-1.2. Only BT v.2 and it headset just last 1-2 year ago.
Is the problem solved ?
Hi everyone !
I've got the same problem with my Jabra BT Headset. But i've found a way to make it work : in fact you have to get your headset already powered-on when you launch BT on your Cruise. Then, you can have regular calls.
Sometimes, it seems to disconnect by itself, don't know why. You have to power off everything, reconnect BT Headset, then re-launch BT service on Cruise.
Have a try and keep in touch !
It seems to me, a problem not only in version BT 1.2 or 2.0. I speak so since has bought SE 712 w/BT 2.0 and has dug into the same problems.
Have you got some news about BT & Cruise ?
Plantronics 590E with Orbit 2 works flawlessly... Distance, sound quality and voice command function is perfect without any issues..
...and A2DP, AVRCP function is same also... with mp3 or movie files... (..need registry tweaks.. i'm find these tweaks in this forum..)
Sorry for my poor English... :|
Does any one have one of these bluetooth car kits and if so does the HD pair successfully?
Yes works not problem with mine - much better that with my tytn ii. calls fine both from parrot & phone answer and hang up & contacts all OK.
you should try the THB CC9060
works very well with my HD and you can A2DP the music to the audio input of the ICE
CK3100
I have S2U2 installed, and use a Parrot CK3100 Kit, and have no problems whatsoever making or receiving calls! I've used several WM devices on the same kit and never had a problem!
Hi,
I have a parrot and I also do not have any connection at all. The parrot keeps asking me for a password.
I have read that you can update the parrot device with bluetooth, so I will try it and I will let you know...
Yes S2U2 installed and no problems, if you have never updated the firmware on the parrot it may be worth looking at that, I had to upgrade it when using my tytn ii as it kept dropping - after the upgrade problems disappeared.
I have 3100,HD and S2U2 and no problem at all.
But I updated to the last rom of Parrot's hads free (look for in his web).
It has few improvements, one of the with WM phones and an other one, very important for me is the possibility to increase the characters cize (for the contacts) in the screen (they were too small before).
Try it
Yup, I have an HD with S2U2 and no problems.
I updated the firmware of the CK3100 about a year ago. When was the last firmware update released?
I have a Parrot 3200 in my car and it took several attempts to get it to hook up. Used to have a 3100 in the wifes previous car - IIRC my diamond took a few goes hooking up to that also (the p/w is 1234 for those IIRC) I found that after an unsuccessful attempt, a soft reset then try again and it worked first time - might be worth a shot?
Here you will find the info to update:
Software program:
http://www.parrot.com/uk/support/downloads
Instructions+info:
http://www.parrot.com/uk/support/onlinehelpguides/parrotck3100ck3300ck3500
Latest version is:
CK3100 : version 4.18b
Hi,
Found the solution to my problem. I had already 5 phones in the list .
Removed one and paired the HD Touch without any problems...
Hi,
I also used the parrot ck3100 in combination with Touch HD. First it didn't work. Also had already 5 paired devices ;-). After removing one it still didn't work. Updated the Parrot with my laptop and the Parrot update device and now it works splendid!
twilsens said:
Hi,
I also used the parrot ck3100 in combination with Touch HD. First it didn't work. Also had already 5 paired devices ;-). After removing one it still didn't work. Updated the Parrot with my laptop and the Parrot update device and now it works splendid!
Click to expand...
Click to collapse
great to hear, same problem, just downloaded the software will let know results.
Is it not possible to upgrade using our HD's? I'm not sure the Bluetooth will work on my laptop with it having Windows 7 on it...
petest said:
Does any one have one of these bluetooth car kits and if so does the HD pair successfully?
Click to expand...
Click to collapse
I have got 3200color. it's paired successfully. But for the contacts i am not sure since I have it transfered to 3200Color before.
Okay, it all worked fine. That's actually the second time I've updated the firmware... not sure I notice any differences.
Has anyone used the VCF creator?
http://www.parrot.com/uk/support/downloads
I just recently acquired a stereo bluetooth headset from dell model number BH200 and so far the stereo music quality is superb, but the moment a call comes in or I pick up a call it immediately disconnects itself. My question would be if any of you guys have any experience with this issue. the Stereo bluetooth and handsfree profile are both set to active. Any suggestions or hints?
I'm going to go on a limb here and assume that you guys haven't had access to the aforementioned bluetooth and i'm short out of luck here... right?
p.s. SAY IT AINT SO!!!!
Hi, I also have the same headphones and the same problem - only on HTC Universal flashed with WM6.
I search a bit on Google and it seems that the problem is with MS Bluetooth stack - it was working correctly for WM5 (but no A2DP), now in WM6 A2DP works, but handsfree does not.
Right now I'm testing alternative BT stacks - started with UniBT (it's Broadcomm stack modified for Universal) - now A2DP works flawlessly (before that, it didn't), but handsfree/headphones mode does not. At least trying to receive the phone call doesn't turn the headphones off.
i tested my fuze with a jabra bt2010 and it works fine. I'd prefer to not carry 2 bluetooth devices so i'm trying to find a way for it to work. I've been suggested to use a widcomm bluetooth stack as well but i dont know how to change my stack. If anyone here does know how to do it, please do enlighten us.
It's been nearly a month so I'm going to bump this thread in hopes of someone might possibly have some insight into this.
Push/bump.
I got the S9 now, it works for both functions but craps out completely when i'm outside, really bad signal reception as well as "muffled sounds" according to my audiophilic and audiophobic friends.
I think it has to be something to do with the actual firmware inside the bh200 that is wreaking some unknown havoc.
Dell bluetooth headset BH200 not working with Sony Xperia X1i
I have a Dell Bluetooth headset model BH200 and in A2DP mode, works flawless but the moment it is used with handsfree mode for call, the connection is broken and the headset switches off itself. This headset works very well with other non WM6.1 devices. Any clues with anony one what should be done in this case, some people have suggested JETware Hands-free Extension , any one tried on this.
I actually gave up on the bh200 and got myself a jabra bt8010. it works like a charm and the sound is just as good as the bh200
Indeed... i used to have a WM device (Mio A501) and I had the WM6.1 Pro..
I bought this BT at that time and it didn't work on WM6.1 (it even didn't asked me the PIN to pair it) but, when I tried with WM5.0, everything worked great, great sound on call's music, etc.. now I have a Sapphire and I'm not able to make calls on it (music works), but since I'm not driving and people used to look like "what a crazy guy speaking in English alone, no cables, it must be a mp3 or something.. hmmm" when I was on a call, it doesn't make a huge difference
i have yet to try this on wm6.5 but I highly doubt there would be a change..i'll give an update when I do charge up the bh200
i charged the bh200 up completely and tested it out.. it was a failure.. looks like 6.5 did not do anything to help...
Maybe windows mobile 7 will work.......... maybe.
You can use BH200 on call by this way only(I tested)
1. Turn on BT
2. Accepted call(However just Turn on your BT after accept call is OK)
3. Turn on BH200
4. Pair ur PDA w/ BH200
5. Done
IS this thead still active? I have a solution
Guys..
Use Reg edit and make the following modifications in your WM device by creating a new DWORD value 0 with the parameter UseESCO. Check out the path
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\UseESCO = DWORD:0 (Dont use space between UseESCO)
Then restart the phone and delete any previous BT devices on your phone, start up the paining process and get it to work.
worked flawlessly on my Dell BH200
Thanks,
Raj.
seriously????
the fix is in one freaking registry tweak????
I'll have to wait 2 months before i can test this since i left the damn thing to rot in the US while i'm here in thailand..-_-
mputtr said:
seriously????
the fix is in one freaking registry tweak????
I'll have to wait 2 months before i can test this since i left the damn thing to rot in the US while i'm here in thailand..-_-
Click to expand...
Click to collapse
Of course Bro. I waited for 6 months myself too.. and finally found it in a microsoft forum.. well at last got it to work and my 200 sounds better than ever with its new functionality..
All the best
Raj
sweet! thanks a bunch man!
prudviraj said:
Of course Bro. I waited for 6 months myself too.. and finally found it in a microsoft forum.. well at last got it to work and my 200 sounds better than ever with its new functionality..
All the best
Raj
Click to expand...
Click to collapse
Heya, Finally got back ot he US and tested out the BH200 with the fix you mentioned. it works!!!!!
although, i'm wondering if you're having problems with the bh200 not wanting to connect to the phone automatically.
Need help for the same problem in android
I am having similar issues on my Nexus one. Dell BH200 works for music playback but stops functioning when a call is made or received. Even the connection between the phone & BH200 gets lost.
I would be really glad to get some help on this.
I have a problem where my HD2 does not work properly with my Land Rover Freelander 2 in-built bluetooth car kit.
The HD2 pairs with the car and I can search my phone book, see my last dialled number, I can even dial a number, BUT, the phone does not connect properly - the car radio should cut out and phone audio come through the car speakers, but instead the radio just continues to play. And shortly after the call is connected to the other party the line is terminated.
My Nokia phone works perfectly with my car, but this phone does not. Even my Sony Ericsson Xperia X1 did not for properly with the Freelander 2.
I did manage to make one successful call, but after I stopped and restarted the car, the problem returned!! Arghhhhhhhhhhhhhhh!
So, does any one know of a fix? Surely hands free/car kit is a standard?
Help!
same problem here. i have a bluetooth car stereo. Always worked fine with my previous HTC's. But now with the HD2 i get the exact same problems as you... I think it's software bug. i have rom version 1.43.404.1 NLD
i hope this gets sorted out cause i use bluetooth audio streaming a lot in the car....same for handsfree calling
Paired it with my Pioneer FH-P80BT on my way to sell my 3GS and recieved a call. Got the same issue as described above - just a bug i presume.
I'm experiancing similar problems. All works fine (incoming call's or outgoing call's) but they get disconnected randomly it seems. I'm using a JVX NX7000 by the way. No problem with my iPhone. Hope they fix it soon!
I tested it with my BMW Idrive last night which is notoriously difficult and it worked fine, I was really surprised tbh! But was able to recieve and make calls, the stereo cut out and could see the phone book too. With my N82 i was only ever able to make/receive calls.
Same problem - Jaguar XF - it docks ok but I have to initiate calls from car (vs phone). Just some weirdness going on...
glenner05 said:
same problem here. i have a bluetooth car stereo. Always worked fine with my previous HTC's. But now with the HD2 i get the exact same problems as you... I think it's software bug. i have rom version 1.43.404.1 NLD
i hope this gets sorted out cause i use bluetooth audio streaming a lot in the car....same for handsfree calling
Click to expand...
Click to collapse
Mercedes brutality
I have a new Mercedes C, and when the HD2 is connected over bluetooth I get an extremely loud, strange ringtone when receiving a call. It is so loud it could really make your shoes go off.
Also it is none of the ringtones available to choose from, inside the phone - it sounds more like a BIOS beep from a PC and hits me while the normal ringtone is playing as well.
It definitely comes from the phone, not from the car stereo. I have not figured out how to resolve this, I think it is outright dangerous for unprepared drivers.
I have a Nissan Pathfinder; it paired ok, and dials from the Pathy without probs. Ringtone is ok too. Sound quality seems better than my old Tytn so all in all v happy.
Doesn't stream music, but that's Nissan's fault, not HTC.
Works fine with the Ford BT system in the Ford Focus (2009).
HTC HD2 Pairing with a Freelander 2 - SUCESS!!!
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
graemenwallace said:
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
Click to expand...
Click to collapse
Hello i have same problem with my BMW X5. Can you explain better your steps ?
graemenwallace said:
Success!!!
So far so good, I applied a known change to the HD2 registry and I am now making and answering calls without fuss!
Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys
Add the DWORD setting COD=5374476
This makes devices see the HD2 as a 'Normal' phone.
Hope this helps everyone.
Click to expand...
Click to collapse
Interesting, I have a similar problem with my 2009 BMW 3 I explain here (sorry I posted before discovering this thread) and I'll try your registry tweak.
But you say that it is "a known change" to the HD2, could you tell us where you saw it ? Is there another discussion about the BT stack somewhere or more generaly about the Widcomm implementation in the HD2 ?
The HD2 being so recent and in short supply, I'm a bit surprised something like that is "well known"
Thanks for your help.
It works !
graemenwallace, I just tried after applying your tweak and... OMG, this is AWSOME man, it just WORKS !
I still just have one gripe though, it seems that the car doesn't always receive the RF level correctly at the first connection. Sometimes it sees the phone as having no carrier at all (no bars in the RX level display), preventing the car to make any calls, but as soon as I receive a call, the level resets to full bars and I can pick the call and make calls myself after that.
When the first call comes in, I can see the display with no bars and a "?" appearing on top of it for a short time before it becomes full bars.
So there is still some compatibility problems, but at least now I can pick-up incoming calls without risking my life.
So I suppose you are a potential life saver then
Thanks mate,
Yves.
Bluetooth is working YES with JVC KD-AVX44 ADV49
After the registry tweak from graemenwallace the bluetooth connection is working properly with my car radio (JVC KD-AVX44/KD-ADV49).
The phone functions ok now (incoming & outgoing calls) Also the AD2P connection is super (very good sound)
Also the ID3 tags are functioning (didn't function with the X1 Xperia)
I see the track title now into the JVC display
Skipping etc. all is functioning. I will tell HTC about it because I have a ticket running for this issue. I think they have to solve this issue
Big thanks for this trick
By doing a little search on the net, it seems like graemenwallace suggested that this problem is not new with smartphones that identify themselves as such.
The tweak above forces the BT stack of the phone to identify itself as a standard phone instead of a smartphone.
What's puzzling is that my BMW handsfree worked with other smartphones so far, including the iphone.
Anyway, it's ok now, but I wonder what bad press this will cause to HTC.
The majority of the users are unaware of this kind of wizardry and this justs adds up to the long list of bugs of the HD2.
When I first got the phone a few days ago I was rapidly convinced to return it immediatly as it's fancy interface wasn't enough to overcome all the shortcomings. It was plain unusable as a business phone.
Now after applying most of the tweaks, it begins to show potential, but HTC really has to work on the problems we can't fix by tweaking the registry.
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
jah said:
Works fine with the Ford BT system in the Ford Focus (2009).
Click to expand...
Click to collapse
Does your Ford system have the Bluetooth audio choice?
I get my Ford Focus changed every six months coz i'm a driving instructor and it comes as part of the deal.
On my last Ford Focus my htc tytn 2 connected ok and I could make and receive calls ok.
However, when the new car was delivered the Ford system had bluetooth audio choice and ipod integration which the other one didn't.
Now my htc tytn 2 didn't connect very well at all.
Now with my HD2 it does connect only if I have the bluetooth audio profile selected.
But now the music player keeps appearing and wants to play music all the time. If I pause the music on the phone it just starts replaying.
Anyway I will try the registry tweak in this thread and hopefully that will solve the problem.
Paul.
Jolig said:
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
Click to expand...
Click to collapse
I have the same problem. I`ll try to pair my HD2 with MB C-klass using SAP but i can`t get them connected it seems like a SAP adaptor can`t activate a PIN input window on HD2 (i guess). With other phones it works perfect (tryed with Nokia 5800, 6500).
Shark_Abuser said:
I have a new Mercedes C, and when the HD2 is connected over bluetooth I get an extremely loud, strange ringtone when receiving a call. It is so loud it could really make your shoes go off.
Also it is none of the ringtones available to choose from, inside the phone - it sounds more like a BIOS beep from a PC and hits me while the normal ringtone is playing as well.
It definitely comes from the phone, not from the car stereo. I have not figured out how to resolve this, I think it is outright dangerous for unprepared drivers.
Click to expand...
Click to collapse
could you pls describe, how did get them paired? when i try to pair them, i see the device`s id, try to "call" it, see pin code and after that i hear the descending tone. and it nothing occurs. SAP is enabled, device is discoverable, what else? Any idea?
Jolig said:
I tried this also, but for me it didn't work.
But my situation is a bit different, as I am not able to connect the HD2 through the Sim Access Profile with my car, which is an Audi A6 mit Bluetooth preparation and I have also the Audi rSAP Adaptor installed in the centre arm rest.
My problem is, that I get a connection to the car, but SAP does not activate and I can't get access to my phonebook - so I only have kind of a handsfree profile...
Am I right that you all use the handsfree profile in your cars and no SAP?
Click to expand...
Click to collapse
I feel your pain, my wife has a GolfPlus and the rSAP instalation is crap.
It's overly expensive and useless if you don't have one of the few phones compatible with it.
Unfortunately, many customers are falling in this trap, thinking it is a standard handsfree, but it is not, it is a full GSM build-in which only access your phone SIM card to log into the network and download your contacts.
In the case of my wife, the dealer was honest and clearly stated that it was a mistake to order this option.
The only problem is that he had no other alternative than proposing an Parrot retrofit which wasn't really an option for me as it wasn't integrated in the car and certainly not in the navigation system.
But internet is your friend and the solution is quite simple, the Kufatec kit.
This is brilliant, it is a small box that connects to the CAN bus of many german cars and integrates perfectly into existing navigators, it uses the steering wheels command buttons and so on.
It is much better (more functions) than original BT options, is tailored to each brand so that the displays are in the same style as the original ones etc.
More interesting, it is field upgradable (just a laptop with BT) so that it is potentialy compatible with anything existing or not yet.
And it only costs a fraction of this crappy rSAP option.
In your case, the good news is that it can simply replace your actual rSAP kit for a minimal installation fee. (the CAN bus has to be reprogramed however, so professional instalation needed)
There is another solution: to replace the unit you have (it is situated under the driver's seat) by a skoda unit. This unit has the same connector but is simple handsfree instead of rSAP.
Hope this helps.