Hi guys. I'm not sure whether any of you out there have this problem. I tried adding some words to XT9 which I use often in sms but after awhile when I tried typing that word again, the word doesn't appear. I will have to type in the word using ABC because XT9 simply can't store the word in the dictionary. Any idea how do I make XT9 store the word so it'll make typing a lot faster? Thanks in advance.
Are you soft resetting every now and then? I know on my ROM the soft reset takes away saved words, but other than that do they ever show up?
Nope. It's like tt even before i soft reset. Any solution to this?
Related
Hi! I badly need your help, after i did a soft reset, my device stopped learning words for text prediction. I understand that our device should be able to \'learn\' new words after we use them a couple of times, then eventually include it in the text prediction (the word that is displayed on top of the keyboad after typing a few characters) It used to work fine but after the soft reset, this feature failed to recognize new words i entered.
and now i\'m stuck with the default words it was packaged with.
I really need your help on this..What should i do?
Would appreciate any help. THANKS!
Hello,
My Phone Pad dictionary lost all Words i learned him after a normal softreset!
Is this normal?
Again i tried to type some words in the dictionary and again all my words are gone after a softreset!
Is this normal or a bug?
What can i do?
Thanks
It is a bug (or maybe a strange feature). Who knows? ;-)
After a softreset normally all words that are teached (new) are lost.
To avoid this. After teaching new words, you have to change the input method to e.g. transcriber and back again to phone-pad
But seriously, You have a wizard, with a full querty keyboard. So why Phone-Pad? ;-)
Hi,
Just yesterday I have noticed a very strange issue. The full qwerty keyboard is permanently stuckup on number keypad which is visible when we press 123.
Any (desperate) attempts to press ABC to get the alphanumeric keyboard back just doesnt work. I tried several ways but its just not working.
I really do not want to do a hard reset for this issue. Is there any registry key that I maybe able to alter.
I dont know the source of this issue but my wild guess is it might have happened after I installed cab to skin the stock calculator.
Any help will be appreciated.
araje said:
Hi,
Just yesterday I have noticed a very strange issue. The full qwerty keyboard is permanently stuckup on number keypad which is visible when we press 123.
Any (desperate) attempts to press ABC to get the alphanumeric keyboard back just doesnt work. I tried several ways but its just not working.
I really do not want to do a hard reset for this issue. Is there any registry key that I maybe able to alter.
I dont know the source of this issue but my wild guess is it might have happened after I installed cab to skin the stock calculator.
Any help will be appreciated.
Click to expand...
Click to collapse
i posted a query about this yesterday as well as i had the same problem. search for keyboard stuck on symbols. i fixed it by leaving the battery out overnight, 60 seconds didnt seem to work, but im looking for a better fix or better a prevention. btw i didnt install any cab for the calculator
araje said:
Hi,
Just yesterday I have noticed a very strange issue. The full qwerty keyboard is permanently stuckup on number keypad which is visible when we press 123.
Any (desperate) attempts to press ABC to get the alphanumeric keyboard back just doesnt work. I tried several ways but its just not working.
I really do not want to do a hard reset for this issue. Is there any registry key that I maybe able to alter.
I dont know the source of this issue but my wild guess is it might have happened after I installed cab to skin the stock calculator.
Any help will be appreciated.
Click to expand...
Click to collapse
try change the input method to something else, then switch back (to full qwerty) to see if it defaults back to the qwerty
buggybug0 said:
try change the input method to something else, then switch back (to full qwerty) to see if it defaults back to the qwerty
Click to expand...
Click to collapse
Already tried this. Doesnt seem to work.
Frustrating ain't it?
Read post #4 here,
http://forum.xda-developers.com/showpost.php?p=3140507&postcount=4
Fixed it for me.
gadgetuk you are a life saver.
Thanks so much. It worked like a charm
very interesting,looks like lots of people are having the same problem on the same date , I have the same problem too,lucky I search here before I do a hard reset , Thanks to
"flogger
Junior Member
Join Date: Jan 2009
Posts: 1
I had the same problem when I installed HD Tweak, it started happening.
I disabled the T9 only in HD Tweak, Shut down the phone, start it again and it went back to normal. No tricky stuff. At least it worked for me."
Worked for me too. Thanks.
T9 only in HD Tweak? Where is that... I looked on options about T9 and disabled it, no go... is there something else I am looking for?
Fix for Full Qwerty Keyboard Stuck On Numbers
This happened to me sometime after I performed this reghack to change word completion behavior:
IMPORTANT: be sure that HKLM\Software\Tegic\eT9\XT9SupportMSSip has a value of 0.
Change these two registry keys under:
HKLM\system\currentcontrolset\control\layouts\e0010409
* Value of Ime File from \windows\xt9ime.dll to \windows\compime.dll
* Value of Layout Text from XT9 IME to COMP IME
To fix it, I used a registry editor to revert back to XT9 settings, soft reset, verified normal Full Qwerty Keyboard functionality returned, then switched back to COMP settings by performing the above reghack again, soft reset, and now I have the auto-completion scheme I prefer and the Full Qwerty is back.
Hope this helps!
Solution found, thread closed
Hi,
I'm wondering if anyone else has the same hair-tearing frustrations as me when using the T9 predictive text.
for example...
type in S U P P O (the start of suppose or purpose)
you get suppo and then after the last two letter to complete suppose...the options you get are
ptppmpd and purpose!!
surely suppose has to come before ptppmpd as a word??? and yes I've tried adding it, but still I get the two options above...and this happens for countless other words.
what good is predictive text if it's going to wrongly predict that I talk gibberish??
I think the first word it suggests is always the literal string of characters on the keys you pressed. I agree: it's of bugger-all use.
There are many bugs in the T9 dialler keyboard but it's still the quickest method of input for me.
SiliconS said:
I think the first word it suggests is always the literal string of characters on the keys you pressed.
Click to expand...
Click to collapse
I may be wrong as I don't use T9 now but I didn't think it was. I'd try looking in the custom dictionary by running eT9MyWords.exe in the Windows directory. My guess is the random letters have accidentally been added as a word.
Hi,
has anyone noticed (or maybe not having the same problem as me) that when using phonepad in T9 mode and writing messages, it doesn't remember the words that you have selected.
for example HE uses the same letters as IF, now...on my old HD, if I typed HE and then selected HE from the list, then type HE again and selected it from the list, next time I typed the keys for HE, the phone would remember that I have used HE the most and HE wold be the fist option in the list....I've done this countless time, but HE is still 5th or 6th in the list of words (ID, which isn't even a word is always first)
as a side issue, one of the first things I always do is edit the T9 dictionary to add my name and other words etc following this..the T9 doesn't remember any new words that I add (I thought it as supposed to do this automatically?)
thanks for reading
Same here
I ve turned T9 of due to this
actually it does.
I had this problem before and only a bit of playing around worked.
Basically, you need to go in to text input settings (can be done from the keyboard pop up menu) and turn ALL the XT9 settings on (i think one or two are off by default)
then, when typing something new, simply turn off the t9, write in the new word then tap on it on the suggestions bit and it will save it to your XT9 dictionary.
Bare in mind that for shorter things, it doesnt for some reason.... only really 3 letter words like uni or bro. for these you need to find the xt9 program, open it and add it.
Hope all that makes sense?
Oh and the HE/ID/if thing sorts itself out after you've selected them about a million times. annoying i know but haven't found a workaround for that.
It does it for me. I've very happy with the way T9 learns from me, even to the point where it's suggesting things like usernames and email addresses when I start typing them.