Related
Any brave soul try using mkrom in conjucntion with the 2003 ROM? I think I might give it a shot here in a bit but wanted to know if anybody had tried it yet...
I've managed to build a 2003 ROM. It's extremely tricky though. I'm working on customizing a ROM similar to the XDA Developers SER - as soon as I get some free time
I'd like to acknowledge all the help given to me by Developer Itsme in this endeavor.
Let me know any suggestions you may have for the new ROM.
sheran_g,
i didn't know u could use mkrom with 2003 rom image. can u please post how u did it? i created a special version based on SE 1.1 rom but would like to put the same programs into the new rom. any help is appreciated.
thanks
alex
sheran_g said:
I've managed to build a 2003 ROM. It's extremely tricky though. I'm working on customizing a ROM similar to the XDA Developers SER - as soon as I get some free time
I'd like to acknowledge all the help given to me by Developer Itsme in this endeavor.
Let me know any suggestions you may have for the new ROM.
Click to expand...
Click to collapse
What's tricky about it...?
The modified registry file you make does not get picked up at the device startup. You need to manually inject the memory address of the modified registry file into the ROM in order for it to get picked up.
my latest romtools can be found at romtools
now it calls dumprom to find and fix the filedata offsets.
I think they should now build 2003 roms.
sheran_g,
can u post the steps that u take to buid it? i'm trying right now and its not working. i'm having little problems. can u post ur default.reg and initobj.txt? any other help is apreciated.
thanks
alex
Ok. Here they are in a nutshell:
Get the latest romtools.
Make the following dirs: romfiles, cfg, tmp, out, files, files1, files2
Split the ROM into Bootloader, bootimage, OS image, xipchain into the 'cfg' dir.
Dump the files in the OS image into a 'romfiles' dir.
Get the default registry file, initobj & initdb files into your 'cfg' dir.
Make changes to your default.reg and initobj.txt
Place any files you want loaded in the ROM into the 'files' dir.
Run 'mkrom.sh'
You should then have your new ROM. I'm sorry if it's extremely brief; you'll have to make do with this and the README file in the romtools archive file for now. You'll find my default.reg and initobj.txt files on my site: www.zensay.com/qtek/mkrom
sheran_g,
Have you created a decent working custom WM2003 ROM?
If so what Apps have you added?
How much ROM space does it use?
I've not added any apps to my ROM. I have only added a carrier logo file and made some changes to the registry. So I cannot comment on ROM space yet. The ROM works fine.
sheran_g,
what command did u use to extract rom files? did u do it under windows or unix?
I'm having problems trying to dump the rom image. I don't know if its too much to ask, but can u zip ur directory and post it somewhere so i can download it? or if u can post commands that u ran to dump the 2003 rom?
thanks
alex
Hi,
could you include "O2 home zune" to the 2003 image, like in the 2002 3.19 GER. Its for Germany interested only!
AR :?:
home zone depends on specific 3.19 rilgsm features. which are not in 4.*
okay, used dumprom -4 -d files -q nk.nbf and extracted all files. Got could not find pointer for ofs 00000000 ERROR but all the files seem to be there. Trying to figure this out. Saw the above abreviated directions but am fumbling around. Anyone have concise directions?
Val
Anyone? Just give me a good hint then please.
Hi all!
When i overwrite the rilgsm.dll file in the t-mobile 4.0.10 image with the rilgsm.dll from the O2 GER 3.19 image, i could use the "O2 home zone" option with the hz.exe in Starup directory? rilgsm.dll from german image hes 'at+creg=2' string in it. probably the RIL_GetCellTowerInfo call is now implemented. When it can work, how could i write the german rilgsm.dll to the image? I haven't linux, could somebody cook the image for me?
here is the germen rilgsm.dll and the hz.exe for the "home zone" funktion! http://www.nokiaprog.de/XDA/home_zone.zip
THX
PS: Sorry, my english! ;-)
AR
the homezone enabled rilgsm.dll depends on other dll's and exe's.
probably ril.dll, stk.exe, cell*.dll and maybe more, I have not tried
replacing all.
you don't need to build a new rom in order to experiment with this, you
can just copy the desired files to \windows, to override the rom versions.
And I don't think it works with the RIL_GetCellTowerInfo call,
but adds some notification events.
to change the CREG setting you need to call RIL_DevSpecific with parameter 25 ( to turn it on ) or 26 ( to turn it off )
even though that does not seem to be how hz.exe does it.
Hi,
I opened the image file in the Hex editor and renamed the file there rilgsm.dll. Then I flashed the image, which was phone probably deactivated, because rilgsm.dll was missing. Then I copied over ActiveSync the German rilgsm.dll into the Windows directory, XDA reset and he not accept the file. I assume because the file was not in the EPROM memory! Therefore I wanted to have rilgsm.dll first times in the image!
AR
XDA developer Itsme said:
my latest romtools can be found at romtools
now it calls dumprom to find and fix the filedata offsets.
I think they should now build 2003 roms.
Click to expand...
Click to collapse
Is there any other way i can access this site or I can download this files, the sites are block here in my country, Please Help
Ronnie
Hi All,
I need some help with CAb files and such.
I'm working on a "self healing" solution for some customers of ours, so that if their device runs out of battery power, when charged, it will rebuild itself and reconfigure itself, so there is minimal user intervention.
What we do is put all our CAB files in the EXROM, and that's how we get it done.
I have an issue with our encryption software in that it's install CAB can't be run from the EXROM, it needs to be run from the root of the device. But it also has to be paired with a license file.
So what I need to do is build a CAB file, that encompasses the Pointsec install CAB and the license file, that copies itself to the root of the device upon running my CAB and runs them from there.
how do I get these files to execute once i've told them to be copied to the root?
I though i'd also put a shortcut to the install CAB in the \windows\startup folder
but once the install CAB is run, the shortcut remains, and therefore upno soft-reset it throws up errors that the file no longer exists
here is a copy of the INF file i wrote to do this.
bear in mind, i'm new to this, so it may be incorrect.
============================================================================================
[SOURCE FILE]
Name=Pointsec_Shortcut.cab
Path=C:\Documents and Settings\build\My Documents\Pocketpc\corporate soe v1.3a\EXTRACTED\new folder\Pointsec_Shortcut.cab
Type=Original
[Version]
Signature="$Chicago$"
CESignature="$Windows CE$"
Provider="Pointsec"
[CEStrings]
AppName="for Pocket PC 2.3"
InstallDir="\"
[CEDevice]
ProcessorType=0
VersionMin=0.0
VersionMax=0.0
BuildMin=0
BuildMax=0
[SourceDisksNames]
1=,Source1,,"[INSTALLDIR]"
2=,Source2,,"[License]
[SourceDisksFiles]
"Pointsec_for_Pocket_PC 2.3.cab"=1
"InstProf.ppp"=2
[CopyFiles1]
"Pointsec_for_Pocket_PC 2.3.cab",,,0x20000003
[CopyFiles2]
"InstProf.ppp",,,0x20000003
[CEShortcuts1]
"Pointsec.lnk",0,"Pointsec_for_Pocket_PC 2.3.cab"
[DestinationDirs]
CopyFiles1=0,"\"
CEShortcuts1=0,"%CE4"
[DefaultInstall]
CEShortcuts=CEShortcuts1
CopyFiles=CopyFiles1
===========================================================================================
Is there a registry entry, like in win2k/XP where I can get this to "runonce" or anything like that ?
Any help would be greatly appreciated.
you should put the cab in the ExtROM, and then.
In config.txt:
add lines to copy the cab to the root
add a line to run the cab from the root
Syntax: http://forum.xda-developers.com/viewtopic.php?t=6648&highlight=config+txt+syntax
cheers edsub,
I wasn't aware of the EXEC command for the config.txt.
that will save me from having to build a CAb file to do this !
for future reference though, is there an execute command you can put into a .inf for theCAB file?
or is that where the setup.dll comes into play ?
yup, thats the allmighty setup.dll.
problem is with that: If you havent build it, you dont know what it does . . .
damn, looks like i have to brush up on my C++ skills
thanks again !!
The WM5.0 emulator is working on my PC.
Japanese Emu, S-Chinese emu, and T-CHinese, emulator. also english.
i want dll, mui, exe files from them, to make Japenese or chinese WM5.0
on my Himalaya with english WM5.
Hope someone can help to dump it or make dump tool.
i have a dump tool my friend made for WM2003 emulator, so not worked for WM5.0.
if need emulator image from WM5.0 SDK, i will upload i them.
Please help!
ms would be pretty stupid if they made it possible for one to unload a real rom image from an enulator
as far as i know then all roms have to be 100% made / "compiled" for each pda to work
so unless that emulator was using an 100% image of the rom for the device you want to upload it to later
i doubt it would work
Rudegar said:
ms would be pretty stupid if they made it possible for one to unload a real rom image from an enulator
as far as i know then all roms have to be 100% made / "compiled" for each pda to work
so unless that emulator was using an 100% image of the rom for the device you want to upload it to later
i doubt it would work
Click to expand...
Click to collapse
thanks for your comment,
but plese dont worry i want just take the resourcese from dll or exe, to make mui files to pretend interface of OS.
i used this way to make japanese OS on my Blue Angel with PPC2003se.
Mr, Mamaichi teached this way to me in the past.
for your refference
http://asukal.seesaa.net/article/6114096.html
http://asukal.seesaa.net/article/5052836.html
Japanese site, but you can see the JPGs
ooh got a bit confused then i guess
Asukal
You can dump the ROM image from WM5 emulator with a normal dumprom tool, but first you need to convert image from B000F to the NB format with the command:
perl splitrom.pl PPC_USA_GSM_VR.BIN -wo ROM.BIN -oe 0x82000000
and then dump it as a normal rom:
dumprom.exe ROM.BIN -5 -d C:\ROM_DUMP
I've tested that on english version of emulator.
you'll need splitrom.pl script and a new build of dumprom tool from itsme.
Mamaichi>>>
thanks for your information!
i will try it!!
Thanks Mamaich!
after i got your private message and done it!
i got dumped roms files form mnu!
@Japanese OS image
@Simple chinese OS image
@Smart phone (WM5) japanese image
after succesfull them, the splitrom have error on following emu image.
@English OS image
@Traditional OS image.
i dont know why???
may try to restart windows system and try again
any way, i got it!
thanks!
hi Asukal,
can you please give me the links to your emu images?
i'm too lazy to search.. ;o)))
thanx
buzz
Yes, why not!
Here it it!
http://www.asukal.jp/ROMs/PPC_USA_GSM_VR.rar
20MB <not dumped yet>
i could dumed english image also.
here it it!
http://www.asukal.jp/ROMs/SDK_ENG.rar (17.32MB) dumped files
i dont know why i couldnt up load this as attachment???? :shock:
so i must use my own server :?
Asukal said:
after succesfull them, the splitrom have error on following emu image.
@English OS image
@Traditional OS image.
Click to expand...
Click to collapse
what is the error text? I've dumped english ROM without errors
to mr,mamaich
i got successfult to dump english SDK emu rom after that.
But i took Bin from SDK in another computer.
I guess Bin file which i tryied dump at beggining was broken or have some problem??
or i have already opened and drove this emu image on the Emulator many times so it was not default already.
i have never tried again about T-CHinese Bin.
i think it can be possible if i took out another T-Chinese bin from another SDK.
the error text was...... cant remember exactry because i left that computer coz i am trip in europe now.
maybe.....
This image files has incorrect(or invalid) boot image.....or some like that.
sorry my late rplay.
I am in Germany now and have to visit Milan and paris after here.
thanks
MUI's in wm2005
Hi, everybody!
I followed this thread and successfully created some MUI's for 2005 (I think) but I can't get the device to load them. I tried changing the registry settings (worked for 2003se) but it didn't help.
No changes I made are visible and the files can be deleted, so I guess they are just ignored for some reason.
Can anyone help please :?:
Thank a lot!
that is true, also cant do that.
keep on studying now.
Something different from WM2003!
MUI security signature?
Hallow again!
I think the problem might be with the digital signature Microsoft now requires. :idea:
Also I made the following experiment:
I put the resources in 2003SE MUI officeres and btres and it did load, but when I tried it with shellres or coresres it didn't work.
I think it won't load unsigned system files…
Any ideas?
Any leads will be greatly appreciated!
:lol:
Re: MUI's in wm2005
levenum said:
Hi, everybody!
I followed this thread and successfully created some MUI's for 2005 (I think) but I can't get the device to load them. I tried changing the registry settings (worked for 2003se) but it didn't help.
No changes I made are visible and the files can be deleted, so I guess they are just ignored for some reason.
Can anyone help please :?:
Thank a lot!
Click to expand...
Click to collapse
because on 2003, files are copied to RAM. on 2005 are used directly from ROM.
buzz
Re: MUI's in wm2005
buzz_lightyear. 2005 can also load dlls to RAM, for example when they are started from storage card or built-in storage.
There maybe one more reason. The DLL may be not loaded if your resource DLL does not have some resources that the original DLL has. Or if your DLL is somehow incorrect. You should make a program that calls LoadLibrary() for your MUI DLL and check the error code if it does not load.
For MS Smartphones there was a registry key that allowed to run unsigned applications. Maybe the similar method exists for WM5.
Asukal. I've attached the program that would try to dump shellres.dll of your device to \storage card\shellres.dll. I've tested the program only under emulator, on the real device it may crash.
If it would not crash - you should look into the produced DLL to examine its resources. This dumper would produce DLLs that are unable to load (they have no relocations information), and their size is larger than it should be, but resources should be extracted correctly.
PM me if the program crashes. And it probably would crash. I'll try to do something.
Mr,Buzz and Mr,Mamaichi!
thanks your comments, and i have just back from Paris and too tired to try mamaichi`s testwm5.exe
aftre sleep while, i will try it! (i dont afraid crash! glad to be sarifice!
I'd recommend you to try this tool - http://forum.xda-developers.com/viewtopic.php?t=23520&start=25#152044
To mr,mamaich
The first attached testWM5.exe dumped only dump.dll(?)
the second TESTWM5.exe of the link can extraxt installed files also, and RAM files can be dumped.too.
but not crashed.
i will remake MUI file and test it!
Thanks!
hi.
How can extract files from a mpx200 rom? I tried to use tools from the forum but with no success. Mpx200's rom is a file with .img extension. As i see so far in forum, rom's file extension for pda is .nbf. Is there any way to convert .img file into .nbf so i can use er2003edit program? Any other idea-guide that could help to extract the rom from my mpx200(wm 2003) would be very welcome. I couldn't find any resources on the web about extracting mpx200 rom and that's why i posted in this forum. I hope that i'm not totally off topic.
Thank you.
Nikos
I had a play with this a while back, to try to get MPX300 compatibility with VJCandela.
I believe the rom files have have a "B000FF header" (open it with a hex editor). Apparently splitrom can reassemble them into a rom we can play with, but it became more urgent to finish VJCandela then continue with this, so I put it aside. If you get anywhere on this, please PM or post so that I can see if I can make VJCandela cross compatible.
Many thanks!
V
I can upload a dumped mpx200 WM5 ROM to xda-developers FTP if needed.
These IMG files are somehow non-standard B000FF, I was unable to use splitrom to convert them to normal file.
You should dump ROM from a device, then remove a hole in the middle (probably MPx200 has 2 ROM chips at different addresses), then edit it manually because some idiot incorrectly edited that ROM to remove DevAuth.exe and broken its internal structure. After that you'll get a complete dump with broken ril.dll and gx.dll.
I wonder how that incorrectly patched ROM can even boot.
That would be interesting Mamaich. I'd appreciate it if you can.
Can we dump a live rom normally then? I'll try to speak to a guy with an MPX300 to get it dumped if possible, and try to upload it if he's successful.
V
hi.
I found so far that it's possible to convert the .img file, which is
used to update mpx200, into a .bin file. I opened the .bin file with a
hex editor and it starts with B000FF as you said. I don't know where i
can use this information or what it means. As you said it's the
header. When i try to dump rom with dumprom.exe i get an error message saying "unable to determine loading offset for out.bin". Looks like i have to find this offset myself and give it to dumprom. Could you help
me somehow on this?
Also where i can read a few things about the rom structure, xip and
stuff to understand what's going on.
Thanks!
EDIT1
Also tried with splitrom.pl.
With command splitrom.pl out.bin it gives me the following
B000FF entrypoint: 00000000
!!! your rom is not known to me: md5:
68847f4d859a242753798d9d0e205144
!!! your bootloader is not known to me: md5:
ea25e7468c09bf09a384a94cb4dcc67c
no operator rom found
no bitmap found
xip regions not found: 82d80000=LANG, 82040000=SMARTFON,
82d00000=OPERATOR, 82f2
0000=OE
And a lazy question. If i finally do it, i will get a folder in my
disk with all windows components unlocked and ready for modification?
EDIT2
Reading a few things about splitrom it says that it can handle bin
files with B000FF header. In our case(mpx200) we have a bin with
B000FF header. Right? So we can use splitrom to make the nk.nbf file.
An example on how to use splitrom.pl is the following.
perl splitrom.pl cfg/rom.nb1 \
-rm tmp/xda1.bin:0x81740000 \
-rm tmp/xda2.bin:0x81b00000 \
-rx tmp/xipchain \
-rb cfg/bootimage.bmp -ob 0x81ec0000 \
-rl cfg/bootloader.nb0 \
-wo nk.nbf -t nbf -n PW10A1-ENG-4.01-007
On the above, he opens rom.nb1 which is his rom file. Probably the
plain rom image format, i don't know the type. Then he refers to
another 2 files xda1.bin and xda2.bin. In my case i have only one
file, out.bin . He also uses bootloader.nb0, i don't have it or
something similar. Finally he writes nk.nbf file and gives it a
header. In my case i will give a B000FF header.
End.
nicktgr15, for extract files from 2002 and 2003 firmware you can use tools from http://onk.nm.ru/mpx200
Great site my friend onk. Great site. I hope i'll find something. Thank you.
Hi nicktgr15!
Any luck with the ROM extraction for MPx200?
Anyone here on this board can comment too.
I went to the link http://onk.nm.ru/mpx200 but can't really get thinks going with the WM2003 for MPx200.
I've the ROM but using dumprom.exe, I got something like 'can't determine the memory offset'.
So...where so I start?
I really need the SIMManager & Resource Manager for my WM5 MPx200.
Also, would like to have the SIM Tool Kit working on my phone since there's no way to interact with the SIM features.
Thanks anyone!
Please Upload the Dumped WM5 MPx200 Rom you are saying about!It will be a huge step!!!We can edit it,fix some bug,even make it work without the need of the SD Card...!!!
I've uploaded ROM dump to uploads/mpx200_dump directory on xda-developers FTP.
Buildimgfs tool is useless on this ROM, because 2 files in it are broken. Maybe addfile/delfile would work (but they would break data in imgfs_removed_data.bin). And of cause you have to manually remove hole inside ROM before working, and inject the removed data back before flashing. And figure out the format of imgfs_removed_data.bin and recreate it yourself.
For dump WM5 files you can use tool http://buzzdev.net/index.php?option=com_remository&Itemid=100&func=fileinfo&id=83
You must create directory "\Storage Card\" on SD and run this program on smartphone
I think this program work on many other devices with wm5
PS. you can read http://www.wce.by/forum/viewtopic.php?t=1517 (Russian language) about tools for firmware
Onk nice site but i can understand a thing!!!
Have you made a fixed version of wm5 for Mpx200?If yes where i can download it?
My goal is to make a cut down wm5 version that can fit on the 32MB ROM of MPx200...can that be possible?
I'm downloadl WM 2005 for MPX200 smartphone Build 14343 from sendmefile , but link id dead ;(
after extract files from archive, I convert part2.bin and part3.bin to CMCS IMGAGE (use BINtoIMG) and flash images to mpx200 (use Motorola Upgrade Wizard 1.8.x)
wm5 for mpx200 used SD card like /Storage on wm2003 and wm2002 (for save config, datafiloes, program etc)
Internal flash used only for firmware
for replace some files from firmware you can place it to /Windows on SD card
BUT! This build of WM5 work on 80-90% of mpx200 devices ;(
some devices can't run wm5.
And the speed of operation WM5 strongly depends of speed used SDcard (x80..x132 recomended)
Your file mpx200_wm5_bin_B00FF.7z (17460816 Bytes) is now online.
Your Download-Link: http://rapidshare.de/files/14495499/mpx200_wm5_bin_B00FF.7z.html
for extract files you must use 7zip archiver www.7zip.org
what?is this a fixed wm5 version?
does it works without the need of the SD?
NO
this version NEED SD
is there ANY chance to remove some files (Images,Sounds,maybe some prorams) from the WM5 ROM and make it work without the need of the SD?
I believe then,the OS would be STABLE and work Faster.
Let's make a Try!!!
What do you think?
part1.bin сontains magneto with use built-in flash memories (WM5 build 14122)
It is necessary to correct a little. Find in an firmware
Code:
0BFC440: 65 6D 72 65 67 69 73 74 │ 72 79 2E 64 6C 6C 00 44 emregistry.dll D
0BFC450: 65 76 41 75 74 68 2E 65 │ 78 65 00 62 74 68 61 74 evAuth.exe bthat
and change DevAuth.exe to AuthDev.exe for disable Device ID check
But this firmware contains one more "protection" - works before some date.
If before flashing set date 2004 - works normally. If the current date - show a modal system window with the message that is the version for developers.
How to disable this "protection" - it is not known yet
And it is not known about locking the register in this firmware
PS: In Firmaware structure ROM similar 2002/2003 is used. Use dumprom for extract files
PPS: my page is updated. Added simple manual about firmware and tools
mamaich said:
I've uploaded ROM dump to uploads/mpx200_dump directory on xda-developers FTP.
Click to expand...
Click to collapse
Can you please upload this dump somewhere once again? as it seems /mpx200_dump is already deleted from FTP.
VipMSCRexe is a utility to run MortScript without Assigning .mscr extension to MortScriptexe.
How to Use it
Rename exe to your scriptname.exe e.g if your script name is sashimi.mscr then rename this VipMSCRexe.exe to sashimi.exe
This utility will first find MortScript.exe in Current directory and Sub directory under it
if not found then look in \Program Files and sub directory
if still not found then look in \Storage Card\Program Files
if still not found then look in root directory.
Once MortScript.exe found then find <exename>.mscr in same above fashion.
Once script found then execute command like MortScript.exe scriptname.mscr parameter1 parameter2 etc.
Advantages of this Utility
you can have only one installation of MortScript and may be all your script in one another folder.
Now if you want to call any of script copy this exe and rename to your scriptname.exe
Basically if you have script name sashimi.mscr then copy this exe and rename to sashimi.exe and put it in any folder
Root or storage card any where and run exe will execute your script you do not give any path or tell where it located etc.
To me MortScript.exe only support one parameter where as this Utility support multiple parameter
Version 1.0
Initial version
Version 2.0
Make changes so that Arguments are passed properly
Performance Improvement using config file
Version 3.0
Performance and Special Chars Handling in Mortscript's Path
Version 5.0
Performance improvement Using registry values
Version 6.0
Fixed Langeuge issue
Fixed Error Handling Routine
Very interesting. I have several uses for this right away so I'll download it and test. Many thanks for sharing!
Just want to note that although this is a fine tool (I'm using it for SASHIMI), if you DON'T need to pass parameters to your program you would be better off to use a renamed Autorun.exe file from the MortScript download.
The only reason I say this is becuase of the delay that VipMSCRexe has when locating/opening the script.
But, if you need to pass parameters to your script, this is the tool!
Don't work in my PC "System.ArgumentException: URI formats are not supported"
In smartphone with WM6.1 is the same error
hurtavy said:
Don't work in my PC "System.ArgumentException: URI formats are not supported"
In smartphone with WM6.1 is the same error
Click to expand...
Click to collapse
Don't work in my PC "System.ArgumentException: URI formats are not supported"
Only Supported for Pocket PC's not for desktops
In smartphone with WM6.1 is the same error
SmartPhone and WM6.1 I am not sure you have smartphone or Wm6.1
Can you please let me know which phone you have?
I have Motorola MPx200 with WM6.1 Standart Russian.
Error message is in russian language. Translate:
System.ArgumentException: It is not possible to show the error message, since it is impossible to find its containing additional assembling of resources in System.IOath:InternalCombine()...
Do you have .netCf 3.0 installed?
hurtavy said:
I have Motorola MPx200 with WM6.1 Standart Russian.
Error message is in russian language. Translate:
System.ArgumentException: It is not possible to show the error message, since it is impossible to find its containing additional assembling of resources in System.IOath:InternalCombine()...
Click to expand...
Click to collapse
Do you have .netCf 3.0 installed?
v3patel said:
Do you have .netCf 3.0 installed?
Click to expand...
Click to collapse
No. Only .NETcf 2.0
I do not have smartphone to test but can you try changing your languegue to english and then try. I just want to see is it languege problem or somthing else.
Posted Version 6.0
Posted Version 6.0
v3patel said:
Posted Version 6.0
Click to expand...
Click to collapse
You Can make it run in Win-CE ?
Great App.
But I have a same problem, it delayed 3-4 second before running a script.
Hope that you can fix it!
Thank u.
blue1311218 said:
Great App.
But I have a same problem, it delayed 3-4 second before running a script.
Hope that you can fix it!
Thank u.
Click to expand...
Click to collapse
Me too, I know that you may have heavy code inside to do like path checking & etc., may be another version with just execute the .mscr in same folder as MortScript.exe & <VipMSCRexe>.exe ?
Many thanks for this great app.,
Thanks, that the thing I need~~~
Hope you can me help
Hello,
i have program in the startup of my WinCE 5 Falk GPS. After the Hard Reset, has a Error. And the text:
Script \Temp\0084Script.mscr not found, waiting for existence (Storage Card not Initializied?)... After 3 sec. my falk stops.
Sry for bad english, im german.....