Database Users

Speaker 2 loud!

When I receive a call and put the phone to my ears, the speaker is too loud even set to minimum, Is there a hack that can adjust this?
If I put everything on speaker phone, the speaker is also too loud but not so anoying, but on the other hand people complain they don't hear me, so the mic
is set too low.
How can I modify this, help needed.
10x
Vid

Why not just lower the volume. Better too loud than too soft... right?

The volume is set to minimum and is still shouts.
And I keep asking people to speak a little bit more quiet and thay say they speak normal.
So my speaker is ultra I suposse, but can I shut it up a bit?

Have exactly the same problem with all 3 M3100's that I've had. Is yours an M3100 too?
I notice that on hard reset, when the extended ROM is executed it runs an application called something like AdjustAcousticProperties. I wonder if this is doing it?

andyf1 said:
Have exactly the same problem with all 3 M3100's that I've had. Is yours an M3100 too?
I notice that on hard reset, when the extended ROM is executed it runs an application called something like AdjustAcousticProperties. I wonder if this is doing it?
Click to expand...
Click to collapse
... whereas on the stock HTV Tytn, the volume is too low! If there's any way of extracting this AdjustAcousticProperties, it might be a real plus for us Tytn owners for whom the volume is too low.
Thanks!

Yes, mine is SPV M3100 too. I will look at the extended rom folder If I have that file.
Any solution?

The file would be great, thanks.
The only solution I can think of is a hard reset and an interrupt when the extROM cabs are loading (eg, don't let the AdjustAcousticProperties load)

Donno about you guys .. but my TyTN .. on speakers .. even with the lowest volume .. SEEMS WAY TOOOOOO LOUDD ...

Yes, on speakerphone, but we're talking about the earpiece volume here, I think...

PLEASE! if you can extract this file I'll like to try it out.
My earpiece of the tytn is SSSHHHIIIIITTTTEEE! its way to soft for me also.
I'm sorry your having the complete opposite problem that some of us are. I wish i could offer a solution for you but if you can offer a solution to some of us, that would be greatly appreciated.
Cheers and thanks

I can post the CAB's somewhere if somebody else would like to take a dig around inside of them?
[edit] Just realised the Orange Extended ROMs are on the site already -
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms

I'm using a Vario II with the same problem.
With speakerphone turned on, even when it is set to the absolute minimum, the speaker screeches....it's that loud!

andyf1 said:
I can post the CAB's somewhere if somebody else would like to take a dig around inside of them?
[edit] Just realised the Orange Extended ROMs are on the site already -
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtendedRoms
Click to expand...
Click to collapse
Hmm, can't see the CAB for AdjustAcousticProperties in the list anywhere, unless I'm being blind...
Anyone help? I'd love to increase the earpiece volume on my Tytn

I presume it's a .exe file buried inside one of the CABs. not sure how you go about decoding the contents of them though as all the files are renamed.
[edit] Just been looking around inside the CAB's using 'Wince cab manager' and nothing appears obvious. I'm sure I'm not dreaming... maybe the application is buried in there somewhere but the name isn't obvious as I have definitely seen it displaying something very close to 'SetAcousticParams' or 'AdjustAcousticProperties' during the execution of a contents of the extended ROM.
If I get time tomorrow I'll do a backup and then do a hard reset to check.
Andy.

Andy,
Great, many thanks!

Just did a hard reset - First thing it does when running the Extended ROM is at the bottom of the screen it says "Running SetAcousticParam.exe /Run..." which takes about a minute to run. Then when it installs the other CAB's you see "Installing ...... " at the bottom of the screen instead. Not sure where the exe is coming from now to be honest as it *doesn't* appear to be in the CAB's.
Andy.

Hmm, interesting. Don't suppose this file is buried somewhere in you windows folder heirarchy is it?
Thanks for helping out here!

Isnt there a reg key u can change the quality level and other things for speaker and speaker phone ,
I rememmber it on my htc wizard.

Hi!
I have totally opposite problem; my original handsfree is too quiet when listening music via Media Player. Every sound setting in the device is at maximum; Media Players volumebar is set to 100%, I scroll devices overall volume to max and slide that little knob at the HF to max. Yet it aint as loud as I would like to. And no, I´m not half deaf or such.
Allso while listening music without HF, I would like to have the device more louder.
Any hints about good 3rd party equalizer programs out there? Like such that the WinAmp (for Microsoft XP) EQ is.
Karzi, yes theres these regkeys which enables one to adjust the quality of the audio, but not it loundness. So I keep searching for programs what would allow to adjust even music loudness, ie equalizers. Anyone?

thetechnogeek said:
Hmm, interesting. Don't suppose this file is buried somewhere in you windows folder heirarchy is it?
Thanks for helping out here!
Click to expand...
Click to collapse
It *appears* to be... but I can't seem to find it. Found a script called preconfig.txt in \windows which seems to govern what happens on the first powerup after a hard reset, which contains the following:
LOCK:Enabled
EXEC:\Windows\SetAcousticParam.exe /Run
EXEC:\Windows\SetHSDPA.exe /Enable
EXEC:\Windows\cusTSK.exe \Windows\Orange2006.tsk
CAB: \Windows\MP_CVSDcpl_20060503.cab
CAB: \Windows\MP_MMS3.2_Hermes_OrangUKWWE_060601.CAB
XML: \Windows\PP_Cerfiticate.xml
XML: \Windows\PP_Generic_Conn_Setting.xml
XML: \Windows\PP_Generic_UI.xml
XML: \Windows\PP_Others_Conn_Setting.xml
XML: \Windows\PP_others_UXC.xml
Hide:Enabled
EXEC:\Extended_ROM\autorun.exe
LOCKisabled
RST: Reset
Looks like it does loads of stuff before it executes the extended ROM. Still can't find the exe though!

Ringing tone volume, Arabic messages

Guys,
Good day all,
I'm very sorry in advance if this is a repeated topic but actually i found a lot of threats that talks about the ringing tone problem.
I wonder if anyone would provide me here with the cab. file that fixes this problem, i'll be very thankful.
Also i'm from Egypt and i bought SE X1 from UK so the arabic language is not enabled in it.
so would you please send me also this program as i need to have this feature enabled in my mob.
reading the arabic message is very important
so please HELP
thanks guys a lot in advance.

:/ next time kindly search..
http://forum.xda-developers.com/showthread.php?t=446711

billybobjones said:
:/ next time kindly search..
http://forum.xda-developers.com/showthread.php?t=446711
Click to expand...
Click to collapse
thanks dude
i tried it already and it didn't work!!!
don;t know why, anyways let's download it again and see
so what about the ringing tone issue??

Dears,
Good Day,
Any help here???

Dears experts,
is the ringing tone problem, a problem with no solution or what?

Well, the arabic support file works fine with, im using US-en interface but sure can send/receive messages in arabic.
>> http://forum.xda-developers.com/showthread.php?t=446711
Regarding the ringtone volume, what's exactly the issue you need to fix?
I did not read about it here, at least recently as i recall. Have you?

DaHiA said:
Well, the arabic support file works fine with, im using US-en interface but sure can send/receive messages in arabic.
>> http://forum.xda-developers.com/showthread.php?t=446711
Regarding the ringtone volume, what's exactly the issue you need to fix?
I did not read about it here, at least recently as i recall. Have you?
Click to expand...
Click to collapse
Dude thanks a lot for replying.
i tried this prog. but it gives me out of license error,
what can i do now?
And about the ringing tone problem, its' volume is too low
i need a program to fix this very very big problem.
i don't know how SE put a great phone in the market with a problem like this !!!

mabdelwahed said:
Dude thanks a lot for replying.
i tried this prog. but it gives me out of license error,
what can i do now?
And about the ringing tone problem, its' volume is too low
i need a program to fix this very very big problem.
i don't know how SE put a great phone in the market with a problem like this !!!
Click to expand...
Click to collapse
Hi. I didn't find any problem with my X1's ring tone. Please don't select mp3 or polyphonic ringtones that has very low recording volumes, because X1 will not be able to enhance the low volume of such tones. Try this tone, like phones.mp3, which i donwloaded from SE X1 site. This tone is very loud for me, if it is not in your phone then there might be a problem.
Note also the position of the speakers in X1, its at the bottom area left and right side, almost to the same level of CALL and END botton. When you are holding your X1 or if it its inside the pouch then the speakers are obstructed, giving you a low ring sound.

X1 after restart always on 'Ring' only!

Hello everyone!
Since always I found that on my X1i (generic_uk 3AA) the Ring and Vibrate changes back to just 'ring' after a restart.
Is there any way to make this Ring and Vibrate "permanent" even after a restart? I looked into the Registry but did not find a proper value to mess around with ....
I had now 6 or 7 of those X1s and this last one is 09W23(!) and still does that.
Help is appreciated

What is this... nobody has the same problem and/or nobody knows a registry 'trick' or other means to solve that either?

michaelthemage said:
What is this... nobody has the same problem and/or nobody knows a registry 'trick' or other means to solve that either?
Click to expand...
Click to collapse
(having that many phones wouldnt matter it would be a software bug if anything)
Just checked mine - after a restart it is still set to vibrate and ring
BUT i am running Vodafone UK - i actually prefered it to generic but since i am using a different rom i cant say properly although they are very similar - see what someone with the same firmware says.
Dont know how to fix though sorry

Hey, thanks for answering. I have voice command installed and a photo contact program that includes ring selections. Even though I don't use those, one never knows if these interfere somwhow.
But there should be some here who know a registry setting and/or have the same problem and solved it somehow.
In any case.... waiting for now....

michaelthemage said:
Hey, thanks for answering. I have voice command installed and a photo contact program that includes ring selections. Even though I don't use those, one never knows if these interfere somewhow.
Click to expand...
Click to collapse
I bet they do interfer.

Ringtone problem

Hi all,
I got my TD2 and I must say I like it very much.
Learning now for ROMs and this stuff, I was at Symbian till now .
One question: I have problem with ringtone when receiving call. No matter what ringtone I put, mp3 one, I got snaps and short empty spaces, like when you talk on walkie-talkie but not that obvious. Maybe it has something with bits, mono-stereo or something.
Anyone have same problem?

marjanot said:
Hi all,
I got my TD2 and I must say I like it very much.
Learning now for ROMs and this stuff, I was at Symbian till now .
One question: I have problem with ringtone when receiving call. No matter what ringtone I put, mp3 one, I got snaps and short empty spaces, like when you talk on walkie-talkie but not that obvious. Maybe it has something with bits, mono-stereo or something.
Anyone have same problem?
Click to expand...
Click to collapse
How about when you use a standard ringtone from HTC?
If that is also bad and you have stock rom you will have to hard reset your device.

Tom Lenferink said:
How about when you use a standard ringtone from HTC?
If that is also bad and you have stock rom you will have to hard reset your device.
Click to expand...
Click to collapse
Yes, it's the same and yes I have stock ROM.
So I'll check if hard reset helps me.
Thanks.

Same thing happened.
I updated it with new ROM (official from HTC) and same thing is happening.
My ringtone is like when you listen CD in car and hit a bump.
Anyone having same problem?

[Q] Sound, vibrator issues with wp7

As mentioned in the subject. Am new to wp7 on hd2. Wanted to know if there is any way I can stop my hd2 going haywire vibrating every time i click on a folder in touch explorer or registry editor or advanced config ..etc ..etc. etc .... And is there anyway I can increase the lousy in call volume..Its really getting to be an issue...I can hardly hear or make myself be heard while talking on the phone which kinda screws up the point of having a cell in the first place.... Why are there no options for editing the in call volume , media volume and ringtone separately as in android??? Help will be appreciated ... Thanks

irteza_h said:
As mentioned in the subject. Am new to wp7 on hd2. Wanted to know if there is any way I can stop my hd2 going haywire vibrating every time i click on a folder in touch explorer or registry editor or advanced config ..etc ..etc. etc .... And is there anyway I can increase the lousy in call volume..Its really getting to be an issue...I can hardly hear or make myself be heard while talking on the phone which kinda screws up the point of having a cell in the first place.... Why are there no options for editing the in call volume , media volume and ringtone separately as in android??? Help will be appreciated ... Thanks
Click to expand...
Click to collapse
I am having the same issue. Found a sound.fix cab file, but cant figure out how to install it. Put it in my documents and clicked through touchexplorer, but no luck so far.

I'm having the same issue, has anyone figured out how to fix this?? Thanks.

Bareslehm said:
I am having the same issue. Found a sound.fix cab file, but cant figure out how to install it. Put it in my documents and clicked through touchexplorer, but no luck so far.
Click to expand...
Click to collapse
with WP7 Update Cab Sender
http://forum.xda-developers.com/showthread.php?t=1250869
but dont except this solved your problem...

So, no solution to the awful crackling sound of some ringtones (not all of them). I am running the HD2O 2.00b ROM and has been running flawlessly in all other aspects.