Ciao, sono nuovo nel forum.
Volevo un aiuto per il mio qtek 9090
Ho cambiato la rom da inglese a italiano 1.13 solo che appena lo accendo mi dà la scritta NO GSM il telefono non si accende.
Qualcuno mi può dire cosa fare e come fare?
welcome to the forum!
please post in english!
which exact build are you using, what are you planning on doing? in what moment does that NO GSM error appear?
what radio rom are you using?
did you, by any chance, try and soft reset the device by removing the battery instead of using the reset pin on the bottom (a common mistake that results in your situation)?
I have installed rom the 1,13 michy. after hard reset it appears to me " not gsm" vers.1.13 I have tried to install other version rom 1,40 ita I do not succeed to install error 101 and error country
gioco.68 said:
I have installed rom the 1,13 michy. after hard reset it appears to me " not gsm" vers.1.13 I have tried to install other version rom 1,40 ita I do not succeed to install error 101 and error country
Click to expand...
Click to collapse
Please refrain from opening new threads in this section. Opening new threads only for contributions to the forums (roms, kitchens, skins, fixes, etc). Next time, please use the Q&A thread in this forum to ask questions. I have transferred your question there. Thanks for understanding.
Related
What can i do to resolving my receivig problem? I have original Rom 1.12.408.1 ITA, Rom Radio 02.67.90. I don't want lose my original rom and my programs.
In italiano: chiedo scusa x l'inglese approssimativo...ho seri problemi di ricezione; quando mi kiamano, spesso nn sono raggiungibile (wind). Ho visto ke esistono degli aggiornamenti x la rom radio, come faccio ad installarli? Ho scaricato USPL, ma quando procedo all'avvio, mi richiede di installare una nuova rom; nn posso installare solo l'aggiornamento radio?
ilcontefabio said:
What can i do to resolving my receivig problem? I have original Rom 1.12.408.1 ITA, Rom Radio 02.67.90. I don't want lose my original rom and my programs.
In italiano: chiedo scusa x l'inglese approssimativo...ho seri problemi di ricezione; quando mi kiamano, spesso nn sono raggiungibile (wind). Ho visto ke esistono degli aggiornamenti x la rom radio, come faccio ad installarli? Ho scaricato USPL, ma quando procedo all'avvio, mi richiede di installare una nuova rom; nn posso installare solo l'aggiornamento radio?
Click to expand...
Click to collapse
give me a clue what are the problems....
magpie2000k said:
give me a clue what are the problems....
Click to expand...
Click to collapse
if anybody try to call me, I am not reachable and then after minutes suddenly i receive message of lost call incoming
HELP!! I can't use USPL! I have error 270 and i can't install radio rom upgrade!
One can face this problem at any ROM and any Radio version.
The most frequent cause is: your task manager switches off the process named "cprog.exe" whenever you press "switch off all apps".
Solution: Just put this process to the exclusions list of your task manager.
Ciao. Bona fortuna!
ilcontefabio said:
if anybody try to call me, I am not reachable and then after minutes suddenly i receive message of lost call incoming
Click to expand...
Click to collapse
This problem have a lot of T-Mobile users in the Netherlands.
T-mobile has of now not yet a solution for this problem!
I get It....perhaps!
After that i remove some programs and i re-dowload Artemis_USPL.exe, i have got SPL 1.11.0000 (but IPL 1.12.001)...but my device, after "congratulations" has a soft reset. And now? What do i do to install new radio?
..........After 15 minutes........ I GET ALL!!! I installed New Rom Radio 2.93.90! I win vs Error 270!!
Hallo, I am the (fortunate ?) owner of an italian P4350 (WM5 stock, unblemished).
While marvelling at the multitude of options for modding, I don't fully understand the details of flashing, and I worry that things may not go as expected if I try to use any random cooked ROM.
Hence my query: are there any fellow italian P4350 users who have gone successfully through all the paces and which wouldn't mind to maybe give me 5 minutes over an IM or via PMs to compare software versions and clear some doubts ?
Thanks
Ciao, sono il (fortunato ?) possessore di un P4350 italiano (comprato su ciao.it, con WM5).
Se da una parte trovo molto interessante la possibilità di provare mod e ROM differenti, dall'altra mi preoccupo che qualcosa vada storto (un prerequisito mancato, una versione del software inadeguata, o che so io, non sarebbe la prima volta che uso software/hardware localizzato IT che poi si rivela incompatibile con alcune funzioni disponibili world-wide).
Da qui il quesito: c'è qualche anima pia che abbia già flashato con successo e che potrebbe dedicarmi 5 minuti su un IM o via PM per chiarire qualche dubbio ?
Grazie
First and foremost welcome to the forum...
We are one big happy family lol... Um yes I have a youtube video posted on exactly how to do this step by step...make sure you follow along though...and if you like subscribe to my videos as I create different tutorials on the regular...Ciao!!
http://youtube.com/watch?v=g4u627J0Lus
PS Can the ROM be in english?? Because Im not sure if there are any italian ROMs on here!!
Thanks for the reply.
In your last line you highlight in a way what my worries are, viz, that htc italy may use "something" (I have no idea what, or I wouldn't worry) different in the italian herald from its overseas counterpart. I am very probably wasting my Worry Points, but you never know. Hence my quest for someone with the same exact phone who's already undergone all the flashing.
About italian roms, there's the italian WM6 rom on the htc site.
Buonasera a tutto il forum...
sono un tecnico informatico ed ho ricevuto in assistenza da un amico/cliente un Trinity che va sempre in modalità bootloader appena acceso...
Il Trinity in questione è originale come rom e tutto il resto...
L'Activesync 4.5 sotto XP SP3 non lo rileva... se provo ad usare l'utility MTTY mi da che non riesce ad aprire l'USB... ho provato diverse volte ad flashare sia l'spl 1.2 che l'1.3 senza nessun risultato positivo... il display del Trinity segnalava l'avvio dell'upgrade ma dopo 1 secondo si riavviava (sempre in modalità bootloader) ed il pc dava file di aggiornamento corrotto...
ovviamente come da FAQ ho riprovato diverse volte ad effettuare questi aggiornamenti ma sempre con lo stesso esito...
Ho provato ad installare direttamente da MiniSD la ROM cucinata con il WM6.1 ma non tenta manco di installarla (ovviamente ho ridenominato il file come TRINIMG.nbh)... provando a fare l'aggiornamente alla ROM originale che avete postato qui (quella da utilizzare per mandare il telefonino in garanzia)... ed utilizzando sempre il metodo della MiniSD mi fa effettivamente l'aggiornamento... ma quando riavvio il telefonino mi va sempre comunque in modalità bootloader...
inutile dire che soft ed hard reset sono stati ampiamente provati...
Come la risolvo questa situazione?
Ringrazio anticipatamente per le Vs. risposte
Francesco Pennelli
Mod Edit:
It is a forum rule to provide an English translation - on this occassion I have done a google translate (next time the OP must provide it)
English
Good evening to all the forum ...
I am a computer technician and I have received assistance from a friend / client a Trinity that is always in bootloader mode just lit ...
Trinity in question is original as the Roma and the rest ...
The Activesync 4.5 under XP SP3 does not recognize that ... if I try to run the utility MTTY me who can not open the USB ... I tried several times to flash the SPL is 1.2 that the 1 .3 with no positive result ... the display of Trinity signaled the start the upgrade but after 1 second restart (always in bootloader mode) and the PC gave update files corrupted ...
FAQ obviously as I try several times to make these updates, but always with the same outcome ...
I tried to install directly from the MiniSD ROM with WM6.1 cooked but not even try to install it (obviously I renamed the file as TRINIMG.nbh) ... trying to do the upgrade to the original ROM that you have posted here (the one to use to send the phone under warranty) ... and always use the method of MiniSD me the upgrade ... but when I restart the phone is always still in bootloader mode ...
Needless to say, soft and hard reset have been extensively tested ...
Like I fix this?
Thank you in advance for your answers
Sorry I didn't noticed the rule about writing the questions in both Italian and English... here is the translation made directly by me about this question:
Good evening to all the forum...
I'm an IT Technician and I have a Trinity of a friendly customer of mine to check... this Trinity is always going in bootloader mode as soon as you switch it on...
This Trinity has the original rom and spl on...
MS Activesync 4.5 is not able to detect it under Windows XP SP3... If i try to use the MTTY utility I receive an "i can't open the USB port" error...
I tried several times to flash both version of SPL... 1.2 and 1.3 ... but I had no positive result... Trinity display show the start of the upgrade process but after 1 or 2 second the device reboot (always in bootloader mode) and the PC utility show the corrupted updating file error... I tried as advised from the FAQ to update again without changing anything... but i had the same result.
I also tried to install directly from the MiniSD both the cooked WM6.1 ROM or the original ROM posted on this forum (i renamed each file to TRINIMG.nbh before copying them to the FAT32 formatted MiniSD)... the update of the cooked one is not even starting... the one of the original ROM arrive until the end without any problem... but when I restart the mobile it keep going in Bootloader mode
I have of course tried to do both soft or hard reset several times...
What I have to do to fix this problem?
Thanking you for your quick reply I await
Francesco Pennelli
hi, I'm looking for a performance ROM for my Polaris...
I use a lot the mail,
sometimes gps (two type of uses, one for street navigation, other for track mountain trails),
browser
facebook
music
so, at the moment i use rom (Mago manila 2d 3.20.408.8 Finale 3G) take into an italian forum (http://www.mobilehtc.net/forum/viewtopic.php?f=91&t=2190)
i wanna try another one, just give me some advice.
i just see this topic:
http://forum.xda-developers.com/showthread.php?t=548109
http://forum.xda-developers.com/showthread.php?t=459826
Guys stop creating one post for one question, jsut searcha little bit in this polaris forum there already lot of answer for your problem.
Too much new thread for nothing .
Thanks.
sorry but thers a lot of post but no one collected all rom.
only one collected all rom but is not upgraded...
i just asked to all together which is the best (for you) rom in italian...
at the moment use this one:
ilSalgo V1 2g+Light WM6.5 Build 23016
if you have some ideas i can try another one!
for me thi is good!
[ENG]
if you know the sistem to change the rom language...i've try a lot of good rom but in english
[ITA]
se conosci il modo di cambiare il linguaggio nelle rom...ho provato un sacco di buone rom ma tutte in inglese
imocattivo said:
[ENG]
if you know the sistem to change the rom language...i've try a lot of good rom but in english
[ITA]
se conosci il modo di cambiare il linguaggio nelle rom...ho provato un sacco di buone rom ma tutte in inglese
Click to expand...
Click to collapse
but exist a sistem to translate a rom? for my phone the best will be my local dialet...
One very good rom according to me
Ciao ho letto il forum, ti garantisco io una rom super-ottima stabile e senza nemmeno un bug (io la uso da un anno in versione inglese, ma il mio amico con lo stesso telefono l'ha messa in italiano, da poco disponibile).. ebbene la mia rom si basa su wm6.1 + manila 2d ed èè fantastica... si chiama 3LIT3..la trovi qui...
http://forum.xda-developers.com/showthread.php?t=459826
garantisco al 100% !!
----------------
Hello I've very good Italian Rom, it has absolutely no bug, it's' here:
http://forum.xda-developers.com/showthread.php?t=459826
@faredino WARN speak in English please or i will ban you
ok
sorry for the big late, this week end i find some minute to erase past rom and try this one!!!
i hope is good.
in th past roma after one month i have a problem of the memory on the phone full.
you have some solution for this bad event?
please help .. I'm not a noob, but this time I've probably done damage.
I installed a ROM on my HD2, probably without the radio accurate (I think I installed and I'd rather have another), once installed on the ROM cell has successfully started, I sent SMS, made phone calls, then I Google Maps 4.0 installed in phone memory I did a soft reset and now it gets stuck with the writing htc green on a white background and not charged. I do not know what to do can you help me? the phone is not synchronized so I can not do anything to flash new ROM or radio. Help please
I'm sorry for my english i use google translate
-----------------------------------------------
Aiuto perfavore.. io non sono un noob, ma questa volta probabilmente ho fatto un danno.
ho installato una ROM nel mio HD2, probabilmente senza la RADIO esatta (credevo di averla installata ed invece ne avevo installata un'altra), una volta installata la ROM il cellulare si è avviato correttamente, ho mandato SMS che, fatto telefonate, dopo ho installato Google Maps 4.0 nella memoria del telefono ho fatto un soft-reset e adesso mi resta bloccato con la scritta htc verde su sfondo bianco e non carica. non so che fare mi potete aiutare?il cellulare non si sincronizza quindi non posso fare niente per flashare nuove ROM o RADIO. Aiuto perfavore
1] Have you tried a hard reset? It is recommended that you hard reset after installing a new ROM.
2] You can load a new ROM via the MicroSD card so you don't have to have it sync'd. Have a look at the ROM upgrade section
dino_Donis said:
1] Have you tried a hard reset? It is recommended that you hard reset after installing a new ROM.
2] You can load a new ROM via the MicroSD card so you don't have to have it sync'd. Have a look at the ROM upgrade section
Click to expand...
Click to collapse
Yes i reset memory card too because i had english rom and i install italian rom....
i try with MicroSD Card now...
everything ok .. I went into boot load and I flashed the new radio ...
thanks
well if you want to delete the post ... thanks