Related
Guys, I was just asked how to prepare a cab file containing registry settings, to save you having to configure your registry manually each hard reset.
Anyway, the process is (relatively) easy!
Purists and coders would generally do this by writing your own installer cab. For this route, follow this thread and engage brain to OverDrive!
http://www.pocketpcdn.com/articles/setupdll.html
However, the easiest way is to grab a copy of WinCE cab manager.
Install that app. Find any existing cab that you've used to install an app before. Load it into CabMan. Using the interface, remove all existing files and registry settings etc. Set your own Cab name, company name etc in the settings.
Then, you'll see on the file menu, there's an option to import a .reg file.
So: export all the registry settings you want to rebuild from your PDA, using a good registry editor. I recommend Kilmist Registry Editor .
Save each exported tree as eg 1.reg, 2. reg, etc.
Then, copy them onto your pc, open each file in notepad and copy and paste the contents of each into 1 large file, eg RegCompiled.reg. (You don't need to do this step, but for your own reference you may want them all in one place)
Then, import that into CabMan. Now, it may not work - I think you need to have a valid reg file, which is basicaly the same thing you've already got, but with a first line header saying:
"Windows Registry Editor Version 5.00"
No speech marks.
Grab this line for yourself by exporting something from your pc's registry using RegEdit, then load into notepad and grab the first line.
Ok, CabMan should now show the number of imported registry entries on the tree on the left.
That's it! Save, and then run on your PDA.
Try a test run first before relying on it for life and death!
V
vijay555 said:
Then, you'll see on the file menu, there's an option to import a .reg file.
So: export all the registry settings you want to rebuild from your PDA, using a good registry editor. I recommend Kilmist Registry Editor .
Click to expand...
Click to collapse
I'm using for this purpose two regeditors - both freeware:
PHM registry editor [Philippe Majerus] v0.70 - for its search feature
TRE registry editor [TascalSoft] v0.90 - for import/export and ability to edit MULTI_SZ values.
There is one great utility: SSnap
Run SSnap before and after installation and compare files. Use any diff program or [my choose, but comercial] UltraEdit
baniaczek: thanks for the alternatives.
PHM is very good, but unfortunately at least in the previous versions, the export wasn't very helpful.
A good reg editor is a fairly essential tool, so use what you get on best with!
V
I have a question, is there anyway to make it so that the cab will also delete a registry key on the phone? any help would be appreciated. thanks.
vijay555 said:
Guys, I was just asked how to prepare a cab file containing registry settings, to save you having to configure your registry manually each hard reset.
Anyway, the process is (relatively) easy!
Purists and coders would generally do this by writing your own installer cab. For this route, follow this thread and engage brain to OverDrive!
http://www.pocketpcdn.com/articles/setupdll.html
However, the easiest way is to grab a copy of WinCE cab manager.
Install that app. Find any existing cab that you've used to install an app before. Load it into CabMan. Using the interface, remove all existing files and registry settings etc. Set your own Cab name, company name etc in the settings.
Then, you'll see on the file menu, there's an option to import a .reg file.
So: export all the registry settings you want to rebuild from your PDA, using a good registry editor. I recommend Kilmist Registry Editor .
Save each exported tree as eg 1.reg, 2. reg, etc.
Then, copy them onto your pc, open each file in notepad and copy and paste the contents of each into 1 large file, eg RegCompiled.reg. (You don't need to do this step, but for your own reference you may want them all in one place)
Then, import that into CabMan. Now, it may not work - I think you need to have a valid reg file, which is basicaly the same thing you've already got, but with a first line header saying:
"Windows Registry Editor Version 5.00"
No speech marks.
Grab this line for yourself by exporting something from your pc's registry using RegEdit, then load into notepad and grab the first line.
Ok, CabMan should now show the number of imported registry entries on the tree on the left.
That's it! Save, and then run on your PDA.
Try a test run first before relying on it for life and death!
V
Click to expand...
Click to collapse
4 reg hacks u can also use my way and i think it is a lot faster
http://forum.xda-developers.com/showthread.php?t=547339
btw i cannot upload the ppt file 2 xda (dont know way it is only 3m) if someone can it will be great
tnx
The WinCE CAB Manager is the ultimate utility for developers of applications designed for the Windows CE operating system. But it's not freeware!
You might build the CAB online: http://www.supware.net/CabGen/
I have created small utility Called VipRegExport.
Requirement : .netCF 2.0 higher
What Utility Do
It reads input ini file and create registry export per section for every values in that section. It saves registry in .reg file.
Sample ini file
# Secion name will file name to be export registry values in it
# this is how you can comments
[MyKeys]
F01=HKLM\Software\Microsoft\Shell\Keys
F02=HKCU\Software\Microsoft\Today\Keys
#Setting for all third party software
[MySoftware]
F03=HKCU\Software\HButton
F04=HKCU\Software\waku
F05=HKEY_CURRENT_USER\Software\TodayAgenda
F06=HKEY_CURRENT_USER\Software\pocketMax
F07=HKEY_CURRENT_USER\Software\AlenSoft
F08=HKCU\Software\Microsoft\Shell\TaskSwitch
F09=HKLM\Software\ThrottleLauncher
F10=HKEY_CURRENT_USER\Software\Parlingo
F11=HKEY_CURRENT_USER\Software\Mort
F12=HKEY_CURRENT_USER\Software\Ghisler
F13=HKEY_CURRENT_USER\Software\FdcSoft
F14=HKEY_CURRENT_USER\Software\CallCalendar2
F15=HKEY_LOCAL_MACHINE\SOFTWARE\SHEALD
F16=HKLM\Software\HTC\HTCHome\Weather\Settings
F17=HKEY_LOCAL_MACHINE\Software\Pointui
F18=HKEY_LOCAL_MACHINE\Software\WiFiFoFum
F19=HKLM\Software\Apps\VicSoft ClearTemp
F20=HKEY_LOCAL_MACHINE\Software\Saman
[MyExtention]
F21=HKEY_CLASSES_ROOT\.mscr
F22=HKEY_CLASSES_ROOT\.mortrun
F23=HKEY_CLASSES_ROOT\MortScript
F24=HKEY_CLASSES_ROOT\.mbi
F25=HKEY_CLASSES_ROOT\MortButtonInfo
F26=HKEY_CLASSES_ROOT\.reg
F27=HKEY_CLASSES_ROOT\regfile
F28=HKEY_CLASSES_ROOT\.pdf
F29=HKEY_CLASSES_ROOT\AdobeReaderLE.2
[MySetting]
S01=HKLM\Software\Softick\Card Export\RunTrayClientAtStartup
S02=HKLM\Software\HTC\PHONE\BatteryIconLevel
S03=HKLM\Software\HTC\PHONE\bShowBatteryIcon
S04=HKCU\Software\Microsoft\Internet Explorer\Main\Default storage location\All Files
S05=HKCR\SystemFileAssociations\image\shell\save\Save Location\Default
S06=HKCR\SystemFileAssociations\audio\shell\save\Save Location\Default
S07=HKCR\SystemFileAssociations\video\shell\save\Save Location\Default
S08=HKCU\Software\HTC\Camera\4.00\Strings\Save Location
S09=HKLM\Software\HTC\Camera\General\EnableDCIM
S10=HKLM\Software\HTC\SUPL AGPS\EnableAGPS\Assisted GPS
S11=HKLM\Software\HTC\SUPL AGPS\EnableAGPS
S12=HKCU\ControlPanel\Phone\ShowSIM
S13=HKEY_CURRENT_USER\ControlPanel\BackLight\QKeyLedTimeout
S14=HKLM\Software\OEM\Power\ShowMovingChargeBar
S15=HKCU\ControlPanel\Sounds\RingTone0\Sound
S16=HKCU\ControlPanel\Sounds\RingTone0\script
S17=HKCU\ControlPanel\Sounds\RingTone0\Category
S18=HKLM\Security\Policies\Policies\0000101a
S19=HKLM\Software\Microsoft\Shell\ShowTitleBarClock
S20=HKCU\Software\Microsoft\Today\Skin
S21=HKCU\ControlPanel\Keybd\DefaultKeyLock
S22=HKLM\Software\HTC\HTCHome\TabSetting
Click to expand...
Click to collapse
There are three command line arguments supported
argument 1 : <inifilename including path> if not given then default is VipRegExport.ini
argument 2 : <Output Folder name including path> If not given default Application Folder
argument 3 : <slient Option> Default is 'N'. If you want to run in slient option then pass third parameter as "Slient"
What is slient option : It will not display any error message like "Registry key does not exist to export" and exit application after export completes.
GUI also gives ability to select input file as well output Folder.
HKEY_LOCAL_MACHINE\Security\Policies\Policies\000010a will export just one key 0000101a in HKEY_LOCAL_MACHINE\Security\Policies\Policies
where as F03=HKEY_CURRENT_USER\Software\HButton will export all keys and subkeys under that registry.
Basically if you want to export full registry including all subkeys and values then put actual key name in value If you only want to just export single keyvalue in specific registry then put keyname\valuename.
It also support HKCU, HKLM, HKCR, HKUS formats as well.
Restriction : Currently export can not export some new registry type like reg_multi_size etc but so far none of my registry values that I needed to export are of those type they mostly String, int, and binary value they all are supported.
Above restriction is removed. Now utility support all types of Registry. Credit Goes to Elemris craetor Kheb. ELemris Thank for helping me out on and sharing your code.
Uploaded new version
Now you can export entire registry with below in INI file
[MyFULLRegistry]
F01=HKLM
F02=HKCU
F03=HKCR
Version 8.0
Fixed "\" in key reported in post # 10
Version 9.0
Quick Fixed "@" in key http://forum.xda-developers.com/showpost.php?p=8347552&postcount=10
If you like my work then please consider donating
FAQ:
Do we need to put F01, F02..... what's happening if I have 2 F01?
F01, F01, F03 is just key in ini File It is not used any where in Program but it is needed in ini file as they are part of ini like section , key and value
Posted Version 4.0
Posted Version 4.0
posted new version 6.0.
Completely working. no restriction any more.
Interesting, thanks.
just one question, then.
So using:
[MyKeys]
F01=HKLM
F02=HKCU
F03=HKCR
will make complete registry dump? in one file?
I wouldn't ask, but i just cannot test it at this moment..
Can not export all reg's at present but i will include in next version
pupakota said:
Interesting, thanks.
just one question, then.
So using:
[MyKeys]
F01=HKLM
F02=HKCU
F03=HKCR
will make complete registry dump? in one file?
I wouldn't ask, but i just cannot test it at this moment..
Click to expand...
Click to collapse
New version can export entire registry
Strange,
F50=HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Manila\Configuration
returns an empty key
I have a question:
Do we need to put F01, F02..... what's happening if I have 2 F01?
F01, F01, F03 are basic part if inin and they are needed.
romualdrichard said:
Strange,
F50=HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Manila\Configuration
returns an empty key
I have a question:
Do we need to put F01, F02..... what's happening if I have 2 F01?
Click to expand...
Click to collapse
F01, F01, F03 is just key in ini File It is not used any where in Program but it is needed in ini file as they are part of ini like section , key and value
F50=HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Manila\Configu ration
Click to expand...
Click to collapse
notice that space between configu
and
ration
here.
Tipo here only. I found that it tries to write this key but I have:
[HKEY_LOCAL_MACHINE\SOFTWARE\HTC\Manila] instead and empty.
Maybe the key is locked or something like that.
\\ are not written correctly I think in name of keys?
I tried to backup F10=HKEY_CURRENT_USER\Software\FdcSoft (pimBackup settings) and found that the custom list (folders list) does not have \
I have "\Windows\Rings\*.*"=dword:00000001 in the backup reg
But after, in the reg I have WindowsRings*.*
Looks like, the import (from sktools) needs \\ to save \...
Actuly it was fixed in version 7.5 but i did not released it.
It is now fixed in new version 8.0
Hi,
May be a good option would be to have an information in the .ini to set the export directory when you load the ini.
romualdrichard said:
Hi,
May be a good option would be to have an information in the .ini to set the export directory when you load the ini.
Click to expand...
Click to collapse
I will add in next version. Right now planning to add WAP export e.g emails setting, wi-fi setting etc exported to xml
Hi v3patel,
stuff like this must be a sticky, because it helps us devs a little bit. Ok there are more other things, but not based on a ini file. With that and mort i have done now two tests and they look really good. I hope you will support it further. And when i read your last post (top on my one) then it is very interesting. Thank you for sharing with us...
Hi,
I´ve got an issue that i can´t set an icon to task manager and messages in start menu/settings/System. See the pic below. I use a cab file to apply these icons.
i just make a pkg with my reg entries and pics i want to use at the end of my kitchen. open up your reg with reg editor and see if it looks like this...
Code:
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Settings\cplmain.cpl,1]
"Rank"=dword:000002BC
"Icon"="[COLOR="Red"]\\[/COLOR]Windows[COLOR="Red"]\\[/COLOR]Start_Icon_Lock.png"
notice the \\, it must be that way in registry...a single "\" wont work. also you could try assigning rank, but i dont really think that is necessary for the pic to show.
twopumpchump said:
i just make a pkg with my reg entries and pics i want to use at the end of my kitchen. open up your reg with reg editor and see if it looks like this...
Code:
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Settings\cplmain.cpl,1]
"Rank"=dword:000002BC
"Icon"="[COLOR="Red"]\\[/COLOR]Windows[COLOR="Red"]\\[/COLOR]Start_Icon_Lock.png"
notice the \\, it must be that way in registry...a single "\" wont work. also you could try assigning rank, but i dont really think that is necessary for the pic to show.
Click to expand...
Click to collapse
Thanks for the tip. I made an OEM of my cab to make it easer. This is what reg i have for the task manager, but it dosnt work.
Code:
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Settings\System\cplmain.cpl,30]
"Icon"="\\Windows\\Start_Icon_TaskMgr.png"
EDIT: Btw, how is rank determined? Dont really understand what ""Rank"=dword:000002BC" means..
I'm a noobie so forgive me if I make any mistakes.
But... Try adding some "zzz"s before the package to make it run at the end of the build process. If it still doesn't work, search inside all files (most probably the .provxml files) in your kitchen folder for "Task Manager.lnk" and see if another file is assigning a different icon to it. I use EVK's built in search engine to do jobs like that.
I hope I helped
EDIT: About Rank, icons are ordered from highest to lowest rank values in the start menu. I think "000002BC" is a hex value for the normal integer value that the rank is set to.
EDIT2: WOW! Awesome icons! Did you make them?
seeM_ZA said:
I'm a noobie so forgive me if I make any mistakes.
But... Try adding some "zzz"s before the package to make it run at the end of the build process. If it still doesn't work, search inside all files (most probably the .provxml files) in your kitchen folder for "Task Manager.lnk" and see if another file is assigning a different icon to it. I use EVK's built in search engine to do jobs like that.
I hope I helped
EDIT: About Rank, icons are ordered from highest to lowest rank values in the start menu. I think "000002BC" is a hex value for the normal integer value that the rank is set to.
EDIT2: WOW! Awesome icons! Did you make them?
Click to expand...
Click to collapse
Thanks for the tip. I have the folder to run last in customization. I understand thats its some sort of hex value or whatever, but i dont understand it so i can place the icons where i want them.
The icons are made by dlink ithink.
2BC = 700. The rankings go from 0-999, and most are higher, which is why that one appears on the low side. The easiest thing is to just arrange everything on the phone (drag and drop), then export the entire start menu registry key and just put that into your start menu EXT. I'm not sure exactly how the values vary left to right and top to down.
I heard somewhere that the built in start menu 'drag n drop' messes with the ranks? I'm probably wrong though
I believe the ranks go in this order.. 1 being highest, 8 being lowest. Please correct me if I'm wrong. I hope NRG doesn't mind me butchering his start menu with my awesome paint skills
Hey... i dont think you are patching and i dont think you are trsut sign the cab... or making the image PNG...
but if you are "cooking" you dont need the cab... just make an EXT PKG with the icons ins the "file" folder... and the REGS in "app.reg" file making the path to the image, if you are patching you must to set the image as "read only" simple slash and be sure that CPL is teh correct one... and for the New TEXTMesage be sure you are using the path to.. tmail.exe i couldnt give you my EXT PKG with the paths cause im not in my home right now
+ Que PPC said:
Hey... i dont think you are patching and i dont think you are trsut sign the cab... or making the image PNG...
but if you are "cooking" you dont need the cab... just make an EXT PKG with the icons ins the "file" folder... and the REGS in "app.reg" file making the path to the image, if you are patching you must to set the image as "read only" simple slash and be sure that CPL is teh correct one... and for the New TEXTMesage be sure you are using the path to.. tmail.exe i couldnt give you my EXT PKG with the paths cause im not in my home right now
Click to expand...
Click to collapse
Thanks for the help + Que PPC. The PNG is ok as it works in start menu. Btw, i made a package, instead of an cab. Much simpler to edit. What is the correct CPL for task manager in start menu/setting/System?
I have no clue on CPL or how to determine posistion
Ok i have the stock image for Taskmanager in my startmenu in position #24
Hex = 35A4EBEC
DEC = 900000748
So it seems that in the strat menu you can rank the icons as you want... by this 100 to 900 valu but in settings and for CPL icons the thing is.. they are arranged authomatically by name
(look at the attached image)
and this is the reg for cpl 30
Just this string in: Start menu settings system screen[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Settings\System\cplmain.cpl,30]
String value named Icon
with this: \Windows\Start_Icon_TaskMgr.png
BEsure there is the image in windows folder
so... in your EXT pkg it must be like this:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Task Manager.lnk]
"Rank"=dword:35A4EBEC
"Icon"="\Windows\Start_Icon_TaskMgr.png"
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Settings\System\cplmain.cpl,30]
"Icon"="\Windows\Start_Icon_TaskMgr.png"
+ Que PPC said:
Ok i have the stock image for Taskmanager in my startmenu in position #24
Hex = 35A4EBEC
DEC = 900000748
So it seems that in the strat menu you can rank the icons as you want... by this 100 to 900 valu but in settings and for CPL icons the thing is.. they are arranged authomatically by name
(look at the attached image)
and this is the reg for cpl 30
Just this string in: Start menu settings system screen[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Settings\System\cplmain.cpl,30]
String value named Icon
with this: \Windows\Start_Icon_TaskMgr.png
BEsure there is the image in windows folder
so... in your EXT pkg it must be like this:
Code:
REGEDIT4
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Task Manager.lnk]
"Rank"=dword:35A4EBEC
"Icon"="\Windows\Start_Icon_TaskMgr.png"
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Settings\System\cplmain.cpl,30]
"Icon"="\Windows\Start_Icon_TaskMgr.png"
Click to expand...
Click to collapse
Only need to learn hex editing to position the icons then
I´ve tried theese, but none of them works.
Code:
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Settings\System\cplmain.cpl,30]
"Icon"="\Windows\Start_Icon_TaskMgr.png"
Code:
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Settings\System\cplmain.cpl,30]
"Icon"="\\Windows\\Start_Icon_TaskMgr.png"
easyst way - works great in build 23112
hello,
1. hardcodec-items
the easyst way to change the icon, is to going in the sys folder to the directory
\SYS\23112\dpi_192\COMMON\Base_DPI_192\
you find all hardcoded items in this directory (e.g. start_icon_*.png)
give your new icons the same name in your ext directory (oem)
2. customize icons
only what you need to customize icon is the following reg-keys
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Task Manager.lnk]
"Icon"="\\Windows\\Start_Icon_Task Manager.png"
-> this key replace the "task manager.lnk" icon in the root of the startmenue
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Office\Notizen.lnk]
"Icon"="\\Windows\\Start_Icon_Office_Notizen.png"
-> this key replace the "notizen.lnk" (like notice in english) icon in the customize directory "order" in the startmenue
so when you need no ranking is the simplest and fastest wayy i can explain to you...
everal said:
hello,
1. hardcodec-items
the easyst way to change the icon, is to going in the sys folder to the directory
\SYS\23112\dpi_192\COMMON\Base_DPI_192\
you find all hardcoded items in this directory (e.g. start_icon_*.png)
give your new icons the same name in your ext directory (oem)
2. customize icons
only what you need to customize icon is the following reg-keys
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Task Manager.lnk]
"Icon"="\\Windows\\Start_Icon_Task Manager.png"
-> this key replace the "task manager.lnk" icon in the root of the startmenue
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Office\Notizen.lnk]
"Icon"="\\Windows\\Start_Icon_Office_Notizen.png"
-> this key replace the "notizen.lnk" (like notice in english) icon in the customize directory "order" in the startmenue
so when you need no ranking is the simplest and fastest wayy i can explain to you...
Click to expand...
Click to collapse
- I can confirm that this works fine.
- However, this is good for lnk that have direct entry under [HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start]. But how to know which cpl index refers to which setting/program shortcut?
everal said:
hello,
1. hardcodec-items
the easyst way to change the icon, is to going in the sys folder to the directory
\SYS\23112\dpi_192\COMMON\Base_DPI_192\
you find all hardcoded items in this directory (e.g. start_icon_*.png)
give your new icons the same name in your ext directory (oem)
2. customize icons
only what you need to customize icon is the following reg-keys
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Task Manager.lnk]
"Icon"="\\Windows\\Start_Icon_Task Manager.png"
-> this key replace the "task manager.lnk" icon in the root of the startmenue
[HKEY_LOCAL_MACHINE\Security\Shell\StartInfo\Start\Office\Notizen.lnk]
"Icon"="\\Windows\\Start_Icon_Office_Notizen.png"
-> this key replace the "notizen.lnk" (like notice in english) icon in the customize directory "order" in the startmenue
so when you need no ranking is the simplest and fastest wayy i can explain to you...
Click to expand...
Click to collapse
The thing is that i dont get the icon that is in SYS, i get the on in the exe. Would not matter if i change it.
Very true i can confirm that... the CPL images for icons in settings system cant be changed... maybe is due to another reg or .ico or other kind of file in oem
+ Que PPC said:
Very true i can confirm that... the CPL images for icons in settings system cant be changed... maybe is due to another reg or .ico or other kind of file in oem
Click to expand...
Click to collapse
Could be.. Probably. I sure hope not
You should convert the rgu files to xml files.
XML always run after the RGU, So its better to use when making custom modification.
http://forum.xda-developers.com/showthread.php?t=369457 (second post)
Th e cpl's are loaded in a provxml in the oem folder (don't remember which one off the top of my head). If it's messing with desired settings, rather than loading another provxml during first boot, and slowing down first boot even more, it's better to either edit or delete the oem provxml. Personally, I'd delete it and then put your start info in an app.reg in an EXT that runs near the end of the build.
Edit: the provxml with all of the cpl's is mxip_HtcApps_translation.provxml, and it's in oem-lang 0409. It's a complete waste to run this thing, imo. Just put it in an app.reg and you'll get a faster first boot.
Sorry but for change icon position in start menu, cant you do it just from start menu moving that icon and then go to the right reg key and export it?
This work for Kaiser dunno if Leo,Tp2 or Topaz has different way.
hi fellow chefs
i post my question here as i thought it would be better then openijng a new thread for it
i keep marketplace in my rom but i cant set it to the internet folder
i have looked in the initflash.dat and there is nothing there about marketplace(at least not that i could find)
i have looked in the sys map from market place and found a provxml
i changed it there the same way i did for taskmanager and it still doesnt work(for taskmaanger it works)
can some one help me out where or what i need to edit to have marketplace in internet folder
i attache my provxml so you can see what i have done
Hi all,
When I open a site which is in my regional language (Indian language), I could only see squares in it.
Do I have to install Unicode fonts in to my Herald?
I have Aserg's ROM and tried to open http://kn.wikipedia.org in the IE.
Just now, I referred to the following tutorial given in wikipedia. And now I can see all the fonts in my regional language.
I can't read anything.
I can't even read the menu items. Nor the Registry keys. Nothing. I don't know what to change back.
Seems, I need to hard-reset. What a fool I am.
------------------------------------------
Unicode on Windows mobile 5.0
To Enable the fonts on Windows Mobile 5 & 6
Copy the unicode font to \Windows\Fonts folder
Download PHM registry from http://www.phm.lu/products/PocketPC/RegEdit/ (select the "Pocket PC 2002,2003 (ARM/PXA) from the dropdown)
copy registry editor cab file to device and install it.
Enable font linking by adding the below registries
Run PHM regidtry editor from programs
Go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\
Select Microsoft, go to edit > New Key and add a new key FontLink below HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\
Select FontLink and add a new key SystemLink (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink )
Select SystemLink and add a string value.
Value name - Tahoma
Value data - \Windows\Fonts\Akshar.ttf,Akshar Unicode
Note: change the "Akshar.ttf,Akshar Unicode" as per the font you have copied to the Fonts folder.
Again go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ and add one more New Key "FontPath"
Select FontPath and add a string value as
Value name - FontPath
Value data - \Windows\Fonts
Soft reset your mobile
So, the method given above just changes the font of the device (while the language does not change).
I am going to hard-reset the device.
Dear colleagues,
hope this post isn't repeated but I collect, filtered & tested information from other threads concering other HTC different devices and it works on my HTC Snap.
I syncronize a lot of emails with attachements and device memory was full. Then installed a 8GB Storage card but didn't find option to use it for messaging storage but other HTC devices as Kaiser & Backstone.
I did the following:
First of all you need a registry editor, there are many downloadable shareware on the web.
Email and Attachments on your Storage Card
Using the file manager in activesync, create the following folders
\Storage Card\Inbox\
\Storage Card\Inbox\Attachments\
(Of course u can name the folder what ever u want, but must use same nameson following configuration)
Then create the following STRING VALUES:
HKEY_Local_Machine\System\Inbox\Settings
Name: AttachPath
String: Storage Card\MAPI\Attachments
Name: PropertyPath
String: Storage Card\MAPI
Then go to HKEY_Current_User
go to Software, then Microsoft, then MAPI
Create them these entries:
a. Create “String”.. Enter name as “AttachPath” and Value:
String as “\Storage Card\Inbox\Attachments”
b. Repeat the same step for next entry… Create “String”
Enter name as “PropertyPath” and Value: String as “\Storage Card\Inbox”
Soft Reset sevice (not hard reset otherwise these changes will be restored to factory default)
Now browse to \Windows\Messaging\
Move everything in this directory to the new ones on your Storage Card.
Still checking if everything is roght but it seems it.
Regards.
DAMM!
Something is not quite good as new emails are stored at device \Windows\Messaging folder again !
Of course is able to read moved ones to Storage Card location, but this seems memory will be full if I don't move incoming msg's to Storage Card often.
Any suggestion before y crash WMM registry?
Thanks friends.