Database Users

Error 270

I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.

diacronic said:
I really hate to make a bad first impression but...
No matter what I do I get this error. I was trying to HARDSPL the phone, I put it into boot loader mode, I installed all the .cab's . It starts the progress bar up gets to about 3% and the phone screen goes black and restarts and then ERROR 270 shows up in the RUU. I searched around but found nothing for the Herald about it. Just asking for any help as to what I can do.
Thank you in advance.
Click to expand...
Click to collapse
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?

dougstoner said:
Have you tried going to start/system/usb to pc and enable advanced network functionality? What rom are you running?
Click to expand...
Click to collapse
ok that was disabled. I enabled it, same problem.
Seems to be running Open Touch 5.0.
Just bought it off ebay.

Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.

If it had OpenTouch 5.0, it might have already been HardSPLed. Either way, I'm glad you found the answer yourself. It shows that you actually did your research.

diacronic said:
Ok think I got it. Seems to be very hard to find a newbie guide for first timers of this sort of thing.
Found some files by ivanmmj and sifted through them. Found a USPL program that SID unlocked the phone, after that I was able to run HARD SPL, and everything was fine. Now my next step is to try to flash a ROM on it , wish me luck.
Think after all this work I'm going to try to write a guide for first timers like me to explain this stuff a little better.
Click to expand...
Click to collapse
That's really not a bad idea. I know I was EXTREMELY confused the first time I flashed my rom. It took me a lot of reading to finally understand RUU stood for rom update utility. You do know for some roms, it's not necessary to hard spl. I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?

There's a walkthrough by me somewhere in the forums.

dougstoner said:
.... I went from stock rom to open touch 3.0. What rom are you thinking about flashing to?
Click to expand...
Click to collapse
Just downloaded ivan's kitchen , but I'm having problems getting it to run. Going to use that to probably make my own and get used to the programs that are out there.

[REQ]Rogers HTC Bricked - Please Help (Advanced User)

Hello Everybody,
Let me start off by saying that this is the worst phone I've ever used. I had great expectations from this phone but never mind - I'm going to stick to my Excalibur.
This is the first time in my life that i actually bricked a phone. I installed a couple of cooked ROMs and everything went fine. I have experience with CID Unlocking and flashing ROMs. Anyways, all I did was try to flash back to the original Rogers ROM from the Original Shipped ROMS thread and that's when my phone got bricked.
I have searched and done everything possible so far and NOTHING WORKS!
So far I've done this:
1) I have tried flashing the Chinese ROM/Dopod WWE Asia ROM as their official HTC ROM's.
2) Done a hard reset
3) Loads into Boot Loader and the boot loader version is
IPL - 2.21.0002
SPL - 2.21.0000
4) Ran MTTY and i got gsecuritylevel=FF (which means install shipped ROM)
5) Tried running USPL but no luck
6) Tried installing Rogers ROM from the original shipped ROMS thread, still no luck as it gets to 3% and reboots
I seriously don't know what else to do. This is just ANNOYING!! Ive been sitting here for the past 4-5 hours trying to get this damn thing to work.
Is there a way to downgrade the SPL so I could flash a ROM?
Is there a free permanent CID Unock available?
Is there ANY WAY out there to unbrick a Rogers HTC TOUCH
(DAMN ROGERS !!!)
Finally, I'm trying the SD Card ROM Update method and hoping it works.
Mods, if you see this and know of a way to help me out, please do or anyone else who knows what to do so my life is back to normal, please help. Thanks in advance.
EDIT: Ok, I tried the SD Card method, it says Checking SD Card Contents and nothing happened, all i see is a tri color screen. The SD Card is 2 GB, is the only file present on the card and it was renamed accordingly (the .nbh file).
Please help as I'm going nuts trying to fix this.
Best Regards,
lukybandit

Anyone at all?
I've done all the searching I could and everything I've tried so far has failed on me.
I can get into the bootloader, get into the hard reset and even can run a mtty session and no matter what I do, it gets stuck at the HTC logo.
In addition to this, all ROM's that I have tried so far keep getting the Error 270 (Obviously due to not being able to even temporarily CID unlocking it).
I did notice a lot of people have bricked their devices and I figure if i can get into the boot loader screen then at least SOMETHING can be done.

Here is what i have learned.
I have the Rogers Touch, and i said SCREW IT, and going to pick up an AT&T Tilt.. I already have 2 S621's, 1 Tytn 2, and i need another phone for my dad.
I had the touch for 1 week and had the same problem as you. Here is what i gather.
1. YOU CANNOT - install the original ROM if you flashed the incorrect ROM
2. Because there is no HARD SPL, i used the USPL, which on reset will result in a CID relock.
3. In this condition, the only way to reflash if you can't get back into the regular today screen is a custom SPL, by Olipro or something.
But Olipro (i keep forgetting his name), charges 75 GBP which equates to $160CDN or so. I bought my HTC Touch used for $200CDN. Makes no sense to fix it. So i am going to try and sell this phone to someone who wants to fix it for cheap.
Sorry man, i looked EVERYWHERE for a fix, and there was NONE to be found, unless you use this guy , who has succesfully fixed everyone elses phone.
Honestly, if my phone was worth alot more than $200, i would pay him with no issue, but because the fix is the same as buying the same phone again, it makes no sense.

Are you serious?!!!
So there's no way for me to fix this piece of ****? frig man.
I paid for this and now I can't fix it?
Can Rogers find out that I tried playing around with the phone or not? I hope not because It's been only 3 days since I got this and it's been barely used.
If there's a fix, please let me know.
That's not even worth it. If there's someone out there that can fix it, please help - Thanks
P.S: Thanks for your response.

Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html

http://forum.xda-developers.com/showthread.php?t=347700
treid that?

Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
Yes, I think I did do a hard reset but I will try again in 5 mins. It was a bad flash cause it stopped in the middle I think.
Yup Both SD Card & SIM Card Removed.
Im guessing the only way I could fix this would be - get the original shipped ROM but so far I was only able to find a dump and not an actual update installer.
My SPL & USPL is 2.21 - So what do you recommend. upgrading the SPL and then trying to re-flash..
Would the TMobile ROM work because my phones Rogers branded and no Canada does not have the Vogue.
In answer to your question, it doesn`t go more than 2-3 % and then gives me an Update Error (270)
ahhh...this is driving me insane.
Thanks so much for the help so far. Really hope you guys can help me out here.

The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.

Noonski said:
Did you to a reformat/Hard Reset on phone first and then tried to reflash?
Worked for me once when i ****ed up badly.
Reset Button and hold down Both call Buttons.
And maybe i should not ask this but you have removed both SD and SIM card?
I'm uploading a 2.26 Rom at the moment.
Doesn't Canada have Vogue devices like the US? (this is a real question i don't know)
Attached is a 2.26 SPL only.
How far does it get in the Flashing screen (45%)?
And here's Full T-Mobile NL Rom with 2.26 http://rapidshare.com/files/122419910/RUU_signed.nbh.html
Click to expand...
Click to collapse
I just performed a hard reset and tried reflashing but still no luck. It gets to 3% then reboots.
In regards to what you attached, how do I go about doing it? Let me know. I downloaded the 2.26 SPL and the NL ROM.

Noonski said:
The main thing is if it flashes SPL only in general or if it does the same thing.
You might even try just flashing the SPL 1.11.11 from Pof from bootloader.
Or just flash the original SPL.
If it doesn't I don't know a way of unlocking in Bootloader.
But more heads will pop up with some Flashing Nightmares experiences soon.
Click to expand...
Click to collapse
Original SPL being Rogers (Can't find it anywhere except a dump)?
k I'll try flashing the SPL 1.11
- Any other thoughts, bro? Thanks!

Did u tried SD card flashing??

Yeah, I did.
I tried the .nbh from the Rogers Dump and it says Invalid Certificate. I tried this other .nbh which said Dead_Elfin, still no luck and the Dopod Asia
I'm so mad/upset and I've tried so many methods to fix it. Is there no way I can get the Rogers dump to work in any way?

Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!

kokotas said:
Hey man!
Somewhere in this thread (2nd page) a guy refers to a ROM that revives your half-dead Touch, "if you trust him"!
But you don't have anything to lose at this point,
so check it out! The link to the ROM is still alive.
Good Luck!
Regards!
Click to expand...
Click to collapse
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.

lukybandit said:
I tried that but it didn't work but I'm trying once more now. Hopefully it'll work.
Click to expand...
Click to collapse
EDIT: Didn't work, updates to 3% then reboots. Just Great !!! This is so annoying.

Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.

Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
yeah, i meant the dumped Roger's ROM.
This is the most annoying thing I've ever had to deal with in terms of owning all my phones. I am selling this phone or returning it back the moment I fix it.
And I'd threaten but he hasn't done anything lol
I hope he does help me out.

Noonski said:
Erro 270, wasn't that image corrupt error.
Damn Olipro can't you help a Mod out yous.
Threaten to ban his ass.
When you say Dumped Roger's rom, you prolly mean dumped Roger's rom, then repacked with HTCRT right?
And not the official full Exe installer.
Click to expand...
Click to collapse
i think its time we make it clear to everybody that XDA means SHARING to help everyone out and not to ask for money in return for something. XDA should only be for those ppl who can work hard for everyone without asking for money.

This phone was the biggest mistake I ever made in my life. I'm sick and tired of this already and I still haven't been able to get it fixed.

LukyBandit
I tried everything that these guys told you to do, NOTHING WORKS.
We have an operator branded device and do not have an ORIGINAL ROM to load in other than a DUMP.
Thats why we are stuck.
I am looking for someone local GTA that might charge less, but yes your TOUCH is fukked unless you are willing to pay OLIPRO $160CDN to fix a phone thats worth $200ish.
I am buying a TILT today, its not worth the stupid touch to fix.
What a waste of money that was. I am so happy my TYTN2 and my soon to purchase TILT has a HARD SPL to it.

hermes brick... no rom.. wont boot using PB

my friend owns an 8525 and all of a sudden it stopped working (cant make/recieve calls and text messages). i tried doing a hard reset and it didnt work. he called att and the tech guy told him that his phone needs to reinstall the rom, which also didnt work. he bought a new phone and gave me the hermes so that i can play around with it. i tried installing wm6 on it and at 15% the update stopped.. and the phone reset itself. now.. it doesnt have a rom installed and keeps on going to the tricolor screen. i tried the unbrick method (in the wiki) several times and still no luck. it keeps telling me that i dont have enough ram but the booting still wont start. what are my other options for fixing this?... my kaiser was bricked before and i did the unbrick method for that and it work.. i havent tried that yet but is there any chance that it will work..?..
he doesnt need the phone anymore but hes hoping that itll be fixed so he can use it as a backup phone.. so.. yea.. any other ideas for ressurecting an old friend?
thanks!!

Sounds like the radio rom is dead.... Whats the SPL? You have a chance if it has Hard SPL installed - should say SPL - 2.10 olipro.
If so, try flashing a stock rom first, then a radio only rom. If you get no love, flash a cooked rom on it. I'd do it using the sd card method.
It should work as a PDA if you can't flash the radio, but its a brick cos no more phone calls...
If he doesn't want that, he could sell it on ebay for spare parts...
Cheers...

I just went through a similar situation last night. I am running dvh_79's v16 (build 19965.1.2.3) Lite. I added his HTC Today Plugin from the sdauto zip file but didn't like how the Today plugin slowed down my phone, so I uninstalled it and that's when my radio took a dump.
I used the instructions in the Hard SPL forum post #116 to unbrick it using the same rom and radio .nbh files and it went off without a hitch.
The first thing anyone should flash onto their phone is Hard SPL v7. Even before any skins. It won't make you 100% safe from bricks, but I'm damn glad I had it on there this morning while I was reinstalling my phone.
BTW ultramag69, I saw a lot of posts by you in various threads talking about unbricking a phone, and correct me if I am wrong, but if I have olipro 2.10 SPL on my phone (which I do), is it possible to initiate an install of a ROM image without being able to successfully boot the OS on the phone? Does Olipro automatically look for HERMIMG.nbh on the SD card? That was a point of confusion for me at first until I ran the HARDSPPL.exe file, but then again my phone didn't brick to the point I couldn't boot the OS.
What are the choices if you cannot boot OS? Are there any that can be performed from the bootloader itself?
Thanks.

well.. i did the kaiser unbrick procedure.. the mtty thingy.. it kinda worked. after that i installed the dopod wm6 rom... it handled the wm6 well---for a while.. after booting, the phone would turn off by itself (w/ 100% battery of course) or even restart itself..
sometimes it will stay on and be "fully functional" (w/o the calling and messaging still...) but somehow freezes when i look at the device information, specifically in the page where it displays the imei (which is missing btw...)..
the "phone" function doesnt work either, as it doesnt show the dialer.. and then after a few minutes, the phone finally freezes...
idk why this happens.. i tried installing other roms but the rom update always freezes. i tried 4 different roms already... so i had to do the mtty thing again...
(i have hardspl installed)

Codevyper, IF YOU HAVE hARD SPL INSTALLED, yes you can run the os flash. Just put the sd card in and reset. As the Hermes is going to the bootloader anyway it will recognise the flash file "hermimg.nbh". I've successfully fixed my phone when thats happened.
akosiryan, it sounds like you may have a corrupted radio rom. This is not gonna make you happy but this is ,at this point, almost 100% unbrickable. You could try to flash a radio only rom - no os, just the radio - but if it gets stuck and you've tried the stock rom then it looks like its a permanent brick...
You should be able to use as a PDA if you don't play with the phone functions though...
Just as a last shot, you could always use MTTY to check for bad blocks BUT this requires you to downgrade the SPL to 1.10 olipro to fix if you do. Please note though that sometimes the carrier does give you a couple of bad blocks to "brand" it as theirs...
Best of luck.

ultramag69 said:
Codevyper, IF YOU HAVE hARD SPL INSTALLED, yes you can run the os flash. Just put the sd card in and reset. As the Hermes is going to the bootloader anyway it will recognise the flash file "hermimg.nbh". I've successfully fixed my phone when thats happened.
Click to expand...
Click to collapse
Thanks ultramag69! I am indeed running olipro 2.10 on my phone so it makes me feel better knowing that if I can get the nbh on the card, then I can flash the ROM that way.

oh well.. me and my friend decided to sell his phone on ebay or sumthin..lol.. so its not a problem.. ill try to do one last step tho.. like flashing the radio only rom to see if itll work.. but i dont really care anymore.. lol.

No problem... If the Ebay from where you're from is like Aussie ebay, you should get approximately 1/2 to 2/3 the price that the working models go for. Generally the price goes up about 6 hours before the end of the auction with the price skyroketing in the last 10 mins... I'd probably give it a few days on Ebay to make sure people see it....
If you do get the radio rom working, Hermes (jasjam/dopod 838 pro) go for about $250 - $350Aud in Oz.
Cheers...

ok then! thanks

got hardspl now i'm stuck

a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!

lilguy227 said:
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
Click to expand...
Click to collapse
ok as from my knowledge you dont necessarily need to do task29 if its ur first time flashing (cuz i didnt and i got very good results) so i think u messed up in tht part.. but its ok, now you prolly want to first --> do a task29 again... second ---> get the nrg rom and flash it.... third -->get a radio of 2.10 or higher and flash tht....and just to play safe flash everything using custom ruu (i got better results using them...just saying)... also when u do each flash and its suspenseful dont boot up the phone, just take out the battery and back into bootloader.
hope this helps... report back lol

^thanks man
Okay so heres how it goes, my phone is def not bricked
custom ruu has only worked once for me
now whenever i try to use it it always gets stuck at 8%
i found that if i flash it at night and hard reset. wait til morning and turn on the phone
then it loads past the nrg screen and into the OS.
i'm currently trying to get it back to stock and i downloaded the tmobile update
but it doesnt seem to work, it also keeps stopping at 8%
i disable the anti virus stuff and i plug it in to the back of my computer

sounds like a defect
sorry to bust your bubble bro but it sounds like you got a classic case of a defective leo, i too did the same steps you did and it turns out my main board wasn't any good and the phone kept overheating, turns out when flashing custom roms they tend to put more pressure on the snapdragon then a regular stock t mobile rom. i know this sounds crazy but i believe it to be true, so with that said you got two options, one get back to t mobile customer care and get a replacement. or do what i did and find a repair shop and let them know that your leo either needs a new mainbaord or a new heatskin like mines did, it cost me 80 dollars which wasnt bad since my leo was a gift and i couldnt give it back to t mobile... hope that helps in some way
p.s. sorry for the edit but if you cant do either of those of what i suggested, try this get yourself a nice icepack nthe size of your phone and mount the leo on top of it whenever your using it, so that sucker wont overheat. once again i hope i helped

[Help] Phone wont boot.

Hi, after hours of researching to find the problem, i cant find it so as my last resort i will ask the mighty forums if there is anything they can do about it.
The problem is that its stuck in a boot loop, i can get in to bootloader and Hboot.
When i press to go in to recovery its just goes to the HTC logo and stays there.
When i try to do a factory reset same thing happened.
Anyway, the facts.
Its a DHD it used to have leedroid latest as rom, atm i have no idea it is supposed to be 1.32 stock rom for rooting and RADIO-26.14.04.28_M, kernel was also leedroid recommended but i guess that also is 1.32 stock.
It was ENG S-OFF but then i tried some PD98IMG and it changed to SHIP S-OFF
Things that i have tried.
Tried different PD98IMG to get the recovery working but nothing same thing happened there.
Tried patched/flashed the recovery part only with no luck.
Tried to get into recovery through pulling the battery inserting the usb and then inserting the battery again, no luck.
The odd thing is when i try to charge the phone and the led goes orange and when i pull the usb out it stays orange, it should turn off.
I suppose i ****ed something over but i have no clue of what that is?!?
Help would be most appreciated

I'm suggesting everyone to give this method a try although i have no experience with it but since it can be used to recover using computer i believe recovery isn't necessary here so that you can recover the firmware using the PC.
Hope this helps

shad0wboss said:
I'm suggesting everyone to give this method a try although i have no experience with it but since it can be used to recover using computer i believe recovery isn't necessary here so that you can recover the firmware using the PC.
Hope this helps
Click to expand...
Click to collapse
Done and failed, same problem no difference what so ever.

SHIP S-OFF is OK!! U got it m8!
If you want to use your own Image do it within this way:
1. Flash this: http://www.multiupload.com/FKJ8B7Q0QM
and after this:
2. Flash this: http://www.multiupload.com/AURLLESU5V
And enjoy it! I don't know why the PD98IMG is not working on your device so I recomend to flash the RUU. Within the RUU you will also get the latest firmware for phone and wifi and so on. It's not a need, it's a must!
The 2nd ROM is same as above but it's ROOTED and contains the 4ext Recovery which will give you the option to flash whatever you want.
BUT!!! This ROM's are ORIGINAL. If you want to use a CUSTOM ROM I would recomend you will format your device by the 4ext Recovery or you are using the FULL WIPE 1.5.
Regards!

Sorry for the insane delay.
That did not work either, anyone else have any idea what to do, installing through PD98IMG.zip files seams not to work, will at this point do anything.
I'am a student so buying a new one is out of the question.

I tend to have to see things to understand them more. Maybe other people are similar. Is it possible you can video the process, put it on YouTube and some of the experts here can see it and talk you through it?

Grant Barker said:
I tend to have to see things to understand them more. Maybe other people are similar. Is it possible you can video the process, put it on YouTube and some of the experts here can see it and talk you through it?
Click to expand...
Click to collapse
Dude, I plus 1 this comment.
Doing exactly that has helped me in the past too.

Well, i am here again with some videos this time, dont really know if it will explain anything but here goes nothing.
youtube.com/watch?v=cHA-k6SadoE
Just a simple start to show what the hell is wrong with it.
youtube.com/watch?v=squwhiGNM3s
Here's me trying factory reset but failed, stuck at the same place as before.
youtube.com/watch?v=aZF1ALz0Z-w
Here is where i go into fastboot, just to show that i can do it and then back again to try recovery, same problem...
Anymore info you need, next time i will answer much faster, anyway there the problem it gets stuck on HTC logo forever, no restart no nothing...

ithen said:
Sorry for the insane delay.
That did not work either, anyone else have any idea what to do, installing through PD98IMG.zip files seams not to work, will at this point do anything.
I'am a student so buying a new one is out of the question.
Click to expand...
Click to collapse
when you flashed PD98IMG.zip does it give you a cid error?. If this is the error then a gold card needs to be made for your device first, then you flash the RUU.

Back again.
No CID error, its skips something called TP when i try to flash it.
I can use any simcard, its an unbranded phone i believe.
And also if it is to any help, when i plug my charger in the phone and then back out again, the little orange led keeps emitting light, as if it stills charging.

My English is not very good.
I want to know what did you do for it before its stuck in a boot loop?
You can get into HBOOT and connect the phone to the computer,then try to run RUU.Before you do this,make sure you have make golden card.

Try another pd zip..i came across a few corrupt ones,the answers in this site somewhere alterbatively google the sentence you want the answer to..or the key words,if the systems still working theres a 98% chance youll get it going boot loops from what i see are just a file or something causing chaos..once its gone voila.
Good luck
Sent from my Desire HD using XDA Premium App

Enter hboot and paste exactly what it says in there.
SHIP AND ENG don't matter as long as it's S-OFF. If you can't access recovery and if you're unable for some reason to flash a PDimg, download AAHK and use it to unroot. That will hopefully get you into the stock ROM and S-ON of course.
Use AAHK again to root. You will still have access to your stock ROM.
Now here's the tricky part. If the phone won't boot at all that probably means there's nothing to boot at all. Happened to me a lot of times. If you can still get into hboot then don't panic. See if AAHK will help you out.