Database Users

Questions From ex-Treo650 user

OK I had gotten board with the lack of wifi and decent web browser on the Treo 650 that I decided to make the move to the 8125. I knew about the speed difference and some of the other issues discussed in these forums because I researched the device for months before making the move. Therefore I wont say much about that. Unfortunately I have a few issues that I can't seem to find answers for in this forum and I was hoping other users out there could help.
1. Is there any way of making the navigation pad useful? I cant access anything on the taskbar and it would be great if I could. I installed magic button so I can close apps and switch back to home when I want. Furthermore there is almost no documentation on how to use the nav pad. All application instructions say tap the icon. It's very convenient to have one handed use. for example i have yet to figure out how to get back to the location bar in Pocket IE so I can enter a url without having to tap the screen.
2. Is it common that some applications just freak out when you switch to landscape mode (scroll bars not working and such)?
3. As mentioned I installed magic button but is there an application that will pop up a list of running tasks so I can switch between them easily with the navigation pad.
4. Backup. I may be very wrong on this but I fear that active sync does not actually backup my entire device like palm does. Could someone clear this up and if I'm correct is there a way for active sync to do this. I have more programs on this device than what is on my add/remove prog screen.
5. Notification reminders. I see a feature to have the led for a period of time but it would be nicer if it could be set to play its sound also. Like the pagers of old.
6. Notification of lost service. This phone never tells me I have no cell service. Last thing I want is battery draining searching or worse assuming I have service and miss all calls.
If anyone could provide some info on the above it would be a great help. i have already found many other programs that make up for the lacking features. Below is a list of what I have installed please make any suggestions you think would be helpful.
1. AnthaVPN - easiest and fastest to install
2. TN520 by mochasoft
3. Pocket Putty SSH client
4. Eyes On Call - Callfilter like program with many features still limited but the developer is very quick in implementing suggestions.
5. Info sharp - same developer as above but this provides sms capabilities that are very impressive. He almost has chat style sms with the way this program works.
6. OMAPclocker - for clocking to 220. I actually see the difference.
7. IM+ - Sametime/AOL instant messenger client.
8. Info apps I have Metro, Ereader, Bdicty, VadeMecum
9. TCPMP
10. Registry Wizard
11. Calc98 - the built in calc app is a joke.
12. Xpressmail - dont care what anyone says this app does what it says it will do. Pushes email to your phone.
Thank You
- Richard

sorry, you are in the wrong forum. This here is the Universal, not the Hermes (or whatever the 8125 is)

thx
wow didn't notice I posted on universal forum. well at least I can correct the typos and vgrammer before posting on wizard.
-Richard

Zumobi - new browser beta available

Zumobi lets you access and share web-based content on your mobile phone in an innovative, new way. It’s totally free and our Beta is ready for you to download now!
This is available at http://www.zumobi.com
However, there is no direct cab available for download. Instead they send you the download link to your mobile number. Being in India, my 12 digit mobile number (with country code) doesn't fit in their input field.
Could someone please post the cab file here after download.

Here ya go: http://rapidshare.com/files/76581523/ZumobiPocketPC.cab
It doesn't seem to play well with Kaiser though!
I take that back. NOTE***** DO NOT USE WITH KAISER. SCREWED UP MY START MENU ROYALY!!!! CANNOT ACCESS PROGRAMS PERIOD!

What is it exactly?? A full browser or limited to specific sites/content??
Any first impressions?

It's very limited. It's basically like an interactive RSS feed. You have to download individual modules for content. It's very slow & the content is seriously limited.
This totally screwed my start menu & I couldn't access the settings or programs menu. The site said it doesn't yet support the tilt & I read simillar problems with the MSM7200 version of the touch. My impression is that it's a seriously slow bit of eye candy with unnecesary content. If you load it up with contrent it runs at about 4megs. Alot for a crippled fancy RSS.

Thanks for the info... I think I'll pass this one

Wow, I installed this application and as soon as I opened it I was greeted by my first ever crash and reboot. I have the Sprint Touch, and up until now it hasn't even frozen once. NO GOOD

GSLEON3 said:
Here ya go: http://rapidshare.com/files/76581523/ZumobiPocketPC.cab
It doesn't seem to play well with Kaiser though!
I take that back. NOTE***** DO NOT USE WITH KAISER. SCREWED UP MY START MENU ROYALY!!!! CANNOT ACCESS PROGRAMS PERIOD!
Click to expand...
Click to collapse
I'm running it from my Kaiser right now, all is ok, including my Start Menu.
Regards,
Taguapire.

it is a slow. ugly and needless application. deinstalled the 5 mb monster after 2 minutes.

E_Shinobi said:
it is a slow. ugly and needless application. deinstalled the 5 mb monster after 2 minutes.
Click to expand...
Click to collapse
Totaly agree, it's the same thing in my LG ks20, but i have a little question, does anyone konw the 'tiles' is some kinde of newsgroups?
thanks

Skyfire Beta Version 0.80 Available Now

From a Skyfire Employee at the Skyfire Forums
I am happy to announce that we have just released Skyfire 0.8 Beta.
We have been working hard on this release over the last few months, and we are happy that we were able to integrate many of your suggestions into this release.
This forum has been a amazing resource for us at Skyfire, and we are grateful for the effort that has been put into this forum by all members.
You can easily get the newest release by logging into your account at http://www.skyfire.com/users/login from your desktop. You will be able to download (SOON - making sure that the download link works first) the newest release via your PC or send yourself an SMS.
Thanks for all the support and the enthusiasm that you have brought to this product. We hope that you will enjoy this release.
Additionally I would like to introduce 'omahadave' (he is actually Dave from Omaha), who will be our new ears and eyes to help you in this forum. Feel free to say hello - you will see in the forum from today onwards.
Thanks, your Skyfire team.
(Robert Oberhofer, Product Management)
----- official release notes start here ----------
Skyfire 0.8 Beta Release Notes
Released: September 24, 2008
Skyfire is a new experience that brings the full internet to your mobile. Watch videos on YouTube or Hulu, connect with your friends on Myspace or Facebook, shop on Amazon or listen to music. Can you do it on your computer at home? Then you can do it on Skyfire on the go.
Skyfire is fast, easy to use and available for free on many smart phone models.
Skyfire 0.8 Beta is a new beta release of Skyfire for Windows Mobile (version 5 or 6). This release has been enhanced with both requests from our active community and new additions that we think will make Skyfire a better experience.
We greatly appreciate our beta community. Their support, active participation and feedback on the forums at http://support.skyfire.com/ helps us to constantly improve the product.
What’s new in Skyfire 0.8 Beta:
Skyfire 0.8 Beta has been under development for the past 4 months, integrating more than 1000 fixes and enhancements. The major focus of this release was to enhance usability, make the experience smoother, increase responsiveness, and improve audio and video quality.
* Contextual Zoom: Let’s you simply and quickly get to exactly where you want to be on the page. Skyfire’s zooming capability has been improved, and now the camera corners feature shows you a match with major screen elements within its view.
* Super Bar: Use our handy new SuperBar to perform a search or enter a URL from a single field – it’s a great time and space saver that is easily accessible.
* Content sharing: You can now share web content by SMS. We even make the URL short enough that it will fit easily into a SMS text message. Especially useful for the really long URL’s used by many sites. You can now also share Skyfire itself with friends by SMS or email.
* Faster application launch: Skyfire launches much more quickly so you to get your content quicker.
* Video and audio: We’ve improved the quality of both video and audio, so you can enjoy a smoother playback experience.
* Reconnect - Skyfire will automatically reconnect, so you don’t need to restart when your wireless connection is dropped.
* Default browser: Now you can set Skyfire as your default browser. Clicking Web links in SMS or Email messages will automatically start Skyfire.
* Enhanced text entry allows you to more easily complete web forms right within a page. First you can enter the text right on the page. Plus you automatically move to the next form element (text field, list, radio button, or checkbox) after you have made a form entry using the ‘OK’ or ‘Enter’ keys.
* Content download: Allows you to download images and other content from most web pages.
* Home screen integration: Allows you to add a Skyfire search and URL bar to your Windows Mobile Today screen, so you can enter what you are looking for right away without first starting Skyfire.
* Mobile site support: If a website also has a mobile version, Skyfire can optionally hint to you about the availability of a mobile alternative. With the new mobile site indicator, you’ll get a quick link to access the mobile version – then you can decide if you want the mobile or full website.
* Bookmarks have been significantly enhanced – giving you much better control.
* Additionally we enhanced the start page: have the top news items accessible immediately via a headline widget.
Downloading and Installing:
To be able to use Skyfire, you first need to sign up for a Skyfire account at http://www.skyfire.com/register. Additionally you need a supported phone, e.g. Windows Mobile 5 or 6 (for Skyfire Beta 0.8) or Symbian (S60 3’rd Edition, for Skyfire Beta 0.6). Please note: We currently only the US is supported.
If you are already registered then simply log into your existing account at http://www.skyfire.com/users/login and download the installation file, or request a SMS to be sent to your phone. Download the file and start the installer. There is no need to uninstall Skyfire first – simply overwrite the existing installation during the process. No worry: your cookies and bookmarks will be preserved.
If you are new to Skyfire and you need to register, provide at your Name, Email and Phone number on http://www.skyfire.com/register. You will be sent an Email and SMS with a URL to complete your registration. Follow this URL (on your phone or PC Browser), and complete the registration. Once registered, you can immediately download the correct installation file for your device. If you downloaded the installation file on your PC you must first transfer it to your phone. Start the installer on your phone and follow the instructions. Once you start Skyfire you will be prompted for your Email address and the password you provided during registration. This will be just once, and you will not have to enter it again (remember the password though to log into your account!)
Known Issues:
* Installation: When the client receives an upgrade notification after resuming from the background it might not successfully resume (Issue 2923). Please exit Skyfire and start again.
* Uninstall: Skyfire uninstall might not be successful or complete when Skyfire is active at the time of uninstall (Issue 1861). Please exit Skyfire first before uninstall.
* When leaving the phone idle for more than 5 minutes Skyfire will display the start page (Issue 2892)
* Downloading files with long filenames might truncate file extensions (Issue 2726)
* Myspace.com: Have to zoom in to 100% to be able to click the log-in button (Issue 2115)
* Mobile site hinting and support: some ‘mobile’ sites are rendering similar to a full web page (e.g. zoom and horizontal scroll). Often this is due to the web page not reporting itself as being mobile. We are looking for a solution.
* Playing video for a long time (> 5 min) might disconnect Skyfire (Issue 2827).
* Non standard SIP’s (Soft Input Panel, e.g. on-screen keyboard) might interfere with Skyfire operation and showing artifacts
* Very long web pages might get cut off at the bottom (Issue 2800)
* Back and Menu soft-key buttons might disappear from screen (Issue 2793). Please use the right soft-key, it usually will bring the on-screen keys back onto the screen.
* In some cases the page might scroll to a different location when entering text into a text entry field (Issue 2678, 2729)
* When Skyfire is in the background the toolbar may become visible on Windows Home screen when switching programs in windows, or locking the phone. (Issue 2732)
* Skyfire URL bar becomes unresponsive when device was in standby mode. (Issue 2892)
* Links to media files (MP3’s etc) currently only play back, and do not initiate download.
* Scrolling through very long list boxes has slow behavior (Issue 1202)
Not supported:
* VGA phones not supported yet (e.g. HTC Touch Diamond etc).
* DivX and XviD Video formats are not supported.
* Quicktime movies which require playback external of browser not supported (Quicktime clips embedded in page are supported).
* FTP browsing and access is not supported (e.g. URL’s with ftp:// )
* Anchors (In-page links) not supported
YOU MUST BE A BETA TESTER TO BE ABLE TO USE THIS SOFTWARE

currently there has been issues with loggin in with this new version...it has been mentioned and will be fixed soon

*yawn*
I'm not an impatient soul by nature but this experience has been one long frustration. It's been months since I registered, haven't heard one peep out of these people since the SMS message I received. Tried accessing their website today and many pages are just missing, and the titlebar says "Welcome to Skyfire!, Error"
Tried logging in to "my account" and was helpfully told that my email address had not been verified yet (!) - basically a polite way of saying "screw you."
I was really looking forward to trying this browser, and although I totally understand the idea of limited public beta testing, being in the software test field myself, the almost complete unresponsiveness of this group to "unverified" users is awfully irritating.
Meanwhile, Opera 9.5 is already a fantastic browser, and I just can't imagine what features Skyfire is going to have that is going to make me overlook my feelings of being ignored and forgotten by a company I wanted badly to support.
It's been a long time since a company has put me off quite this badly. Even MS communicates with the users once in awhile. I don't yet really hope this effort fails, but at this point it could hardly be said it deserves to succeed.
AJ

Finally INTERNATIONAL users can use this app???

Don't Like The Idea Of The Sms .. Login.... What Is Gold?
I Prefer Opera

I installed the new version and when i open Skyfire it ONLY shows the top Unibar, Back, and Menu. Nothing else, just a gray screen. I did manage to get the home page to come up once, but that was it. It's wierd. it thinks a page is loaded cause it will let me double tap and then if i get lucky and click on a link(i assume it's a link that i can't see) it will attempt to load the page...
Have already rebooted. Will try a reinstall...

joshrys said:
I installed the new version and when i open Skyfire it ONLY shows the top Unibar, Back, and Menu. Nothing else, just a gray screen. I did manage to get the home page to come up once, but that was it. It's wierd. it thinks a page is loaded cause it will let me double tap and then if i get lucky and click on a link(i assume it's a link that i can't see) it will attempt to load the page...
Have already rebooted. Will try a reinstall...
Click to expand...
Click to collapse
I believe that they are having some issues with the authentication process, so be patient. You got further than I did though

opera is still more of a desktp browser. the text input for skyfire and loading speeds are still faster, but navigating the pages inskyfire is no where near as smooth as opera. good improvements.. but the major features skyfire were lacking are still missing:
still get the checkerboard when scrolling through a page
smartfit is not very smart.. columns are used in thumbnail view which doesn't really make sense
when you press up and down on dpad while typing text entry, it closes out of the box.. so how do you see wat you were typing before?
overall this versin is better.. but opera is still winning... especially since now it is supporting flash
good stuff though hope to see navigation improved!
htctoucher

Disregard post.

htctoucher said:
opera is still more of a desktp browser. the text input for skyfire and loading speeds are still faster, but navigating the pages inskyfire is no where near as smooth as opera. good improvements.. but the major features skyfire were lacking are still missing:
still get the checkerboard when scrolling through a page
smartfit is not very smart.. columns are used in thumbnail view which doesn't really make sense
when you press up and down on dpad while typing text entry, it closes out of the box.. so how do you see wat you were typing before?
overall this versin is better.. but opera is still winning... especially since now it is supporting flash
good stuff though hope to see navigation improved!
htctoucher
Click to expand...
Click to collapse
Damn so you downloaded the .80 version?

I downloaded and installed .80 with no problem. I could log into the web site and download.
However, when my Skyfire tries to connect on the handheld it tells me that the username/password are not correct.
I don't get it.

balane said:
I downloaded and installed .80 with no problem. I could log into the web site and download.
However, when my Skyfire tries to connect on the handheld it tells me that the username/password are not correct.
I don't get it.
Click to expand...
Click to collapse
its a server side error, they are working on it as we speak
new users that sign up should have no issues

mike21pr said:
its a server side error, they are working on it as we speak
new users that sign up should have no issues
Click to expand...
Click to collapse
I see. Thank you.

Please upload the cab.

IRREAL said:
Please upload the cab.
Click to expand...
Click to collapse
It won't work outside of the US.

i cant login!

M2D users?
A newbie question...
Can anyone tell me how to make M2D internet widget run SkyFire rather than Opera?
The new 0.8 release is da*n quick, presents all websites great, and I like it more than Opera, however I don't want to lose the widget and put SkyFire in the launch area only...
Thanks
BigE

Can't login

Hi all,
What I want is to have the same Gmail interface than the iphone, and not the poor m.gmail.com interface ....
Opera does not do that, and Iris Browser not anymore (it worked but now it does not work anymore).
I live in France so Skyfire is not for me fr the moment....
How should I do then ?
Thanks for replies.
Regards

zlebandit said:
Hi all,
What I want is to have the same Gmail interface than the iphone, and not the poor m.gmail.com interface ....
Opera does not do that, and Iris Browser not anymore (it worked but now it does not work anymore).
I live in France so Skyfire is not for me fr the moment....
How should I do then ?
Thanks for replies.
Regards
Click to expand...
Click to collapse
look for GC's Java pack, it has a gmail java applet that i would bet is what you are looking for.

OpenCellClient - a Windows Mobile opencellid client

Hello all!
I started a new project named OpenCellClient. This application is a scanner for the open service http://www.opencellid.org. This project wants to create a complete database of CellID worldwide, with their locations.
This is very useful for a lot of things, working like a "second GPS", for devices without build in GPS receiver.
More than this, RemoteTracker (version 0.3.0-0 and above) can use this database when the GPS receiver could not find the signal, or if the device does not have this radio inside.
Thinking about the great help this project gives to us, I decide to contribute creating a client for Windows Mobile.
How it works? Start the application and go walk, drive or whatever you want do to outside. You GPS will be turned on and the software will scan for cell towers. Each tower found is stored with their coordinate. You don't need to stay connected to internet spending money transfering data to the opencellid website. You can send the collected data later, in your home, work or any wifi spot. After that, you can make searchs using opencellid web site. And we can't forget: this location will be used by RemoteTracker too.
If you want to give a try, please go to http://opencellclient.sourceforge.net and download the cab file.
Requirements:
- .NET CF 3.5;
- SQLServerCE 3.5.
Keep OpenCellClient up to date!
There is an integration with AppToDate. This application verify if configured softwares are up to date or not. If not, you are alerted, and invited to download the new version! Very cool and useful.
You can download AppToDate here.
After install AppToDate, please download and run OpenCellClient to configure AppToDate.
Try this and don't forget a new version never more!
--> It is a work in progress. In future versions I will make a lot more.
Support this project
You can support this project making a donation clicking here or clicking the banners in the project website.
Regards,
Joubert

looks great thanks for the contribution! i'm getting ready to download it now.

I drive a lot and i'll be more than happy to contribute for France ID's

Very good
Please don't forget this is my first version and may have bugs. If you find one (or more, of course), let me know!
Cheers,
Joubert

Alas, I am not on GSM, but it is fantastic to see you continue to put out fantastic open-source code and tools. Keep up the great work... RT will be built into my ROM always!

Very nice! Will try it on my way to work.
Question: Will it continue to scan when I 'close' the applciation, i.e. put it in the background and use the phone for other tasks, like - äh - doing a phone call or, surfing the web, etc?
Another application using GPS in longer intervals to conserve the battery found out that the initial fixes after the GPS was powered up again (after 3 secs of no GPS usage, the GPS powers down) can be off a bit. I need to check what they did.
Klaus

Ok, I found a small problem: Although WiFi is enabled and a cell is found, the 'Sent to OpenCellID' menu entry is grayed out.
Klaus

Question: Does the API actually give you the Cells 'in view' or only the cells the device is connected to? Because the first would only give you the cells of your provider and not those of competitors.
Although, I understand this would be out of your control, as it happens behind the scenes.
Klaus

How can I send the collected date to the website? This part is always grayed out and not selectable? Still a bug?

xd1936 said:
Alas, I am not on GSM, but it is fantastic to see you continue to put out fantastic open-source code and tools. Keep up the great work... RT will be built into my ROM always!
Click to expand...
Click to collapse
Thank you very much
Cheers,
Joubert

When I exit the app, WiFi gets disabled.
I do have the impression the app stops logging when send to the background, or when the device goes to sleep.
Furthermore my device reacts very sluggish when the app is running in the background.
I hope this feedback helps.
Klaus

krheinwald said:
Ok, I found a small problem: Although WiFi is enabled and a cell is found, the 'Sent to OpenCellID' menu entry is grayed out.
Klaus
Click to expand...
Click to collapse
Hi!
This option would be grayed ONLY if your device is not a GSM device. I will release a new version without this rule. I think the test I did is not the same for all devices.
Cheers,
Joubert

krheinwald said:
Question: Does the API actually give you the Cells 'in view' or only the cells the device is connected to? Because the first would only give you the cells of your provider and not those of competitors.
Although, I understand this would be out of your control, as it happens behind the scenes.
Klaus
Click to expand...
Click to collapse
The API I used only show me the tower I'm connected. I didn't search for triangulation, but it would be a good idea.
Cheers,
Joubert

Lycox said:
How can I send the collected date to the website? This part is always grayed out and not selectable? Still a bug?
Click to expand...
Click to collapse
Hi!
This option would be grayed ONLY if your device is not a GSM device. I will release a new version without this rule. I think the test I did is not the same for all devices.
Cheers,
Joubert

krheinwald said:
When I exit the app, WiFi gets disabled.
I do have the impression the app stops logging when send to the background, or when the device goes to sleep.
Furthermore my device reacts very sluggish when the app is running in the background.
I hope this feedback helps.
Klaus
Click to expand...
Click to collapse
Hi Klaus!
There is a debug option you can turn on. With this option the program create a txt file with debug information you could send to me.
Thank you for your tests
Cheers,
Joubert

I have tested OpenCellClient and have found the following issues:
1. When I am closing the program with the x-Button (top right corner), OpenCellClient is still visible in the process list and use 1,74M of RAM (visible with TaskManager). When closing with the Exit-Button (down right corner) everything is fine. The process/application is not visible in the Taskmanager.
2. When closing the application the WiFi will be disabled also (already found by other users). The debug-Log does not say anything about WiFi.
3. When enabling WiFi (registry key: wifi) the application crashs after starting the scan process. I know that wifi is not yet enabled, but I have tried it .
I have also 2 wishes:
1. I can change the width of the columns, but after restarting the application I have to change the width again. It is possible to save the width of the columns ?
2. All new CellIds should be visible at the beginning of the list, not at the end.
Regards
kuzco

I have a little remark on the way it works.
Currently, when i click start, it opens the table with cell IDs, starts finding etc. Then i click Send and it brings me back to the welcome screen with the progress bar, ok. But after that i'm unable to go back to the table without stopping and restarting
I'd rather have some kind of tabs so i could swap between screens at will, if possible
Otherwise it worked fine, i sent around 50 different IDs today, no problems so far.

kuzco1 said:
I have tested OpenCellClient and have found the following issues:
1. When I am closing the program with the x-Button (top right corner), OpenCellClient is still visible in the process list and use 1,74M of RAM (visible with TaskManager). When closing with the Exit-Button (down right corner) everything is fine. The process/application is not visible in the Taskmanager.
2. When closing the application the WiFi will be disabled also (already found by other users). The debug-Log does not say anything about WiFi.
3. When enabling WiFi (registry key: wifi) the application crashs after starting the scan process. I know that wifi is not yet enabled, but I have tried it .
I have also 2 wishes:
1. I can change the width of the columns, but after restarting the application I have to change the width again. It is possible to save the width of the columns ?
2. All new CellIds should be visible at the beginning of the list, not at the end.
Regards
kuzco
Click to expand...
Click to collapse
Thank you kuzco! Everything will be verifyed
Are you using version 1.0 or 1.1?
Cheers,
Joubert

TrYde said:
I have a little remark on the way it works.
Currently, when i click start, it opens the table with cell IDs, starts finding etc. Then i click Send and it brings me back to the welcome screen with the progress bar, ok. But after that i'm unable to go back to the table without stopping and restarting
I'd rather have some kind of tabs so i could swap between screens at will, if possible
Otherwise it worked fine, i sent around 50 different IDs today, no problems so far.
Click to expand...
Click to collapse
Hi!
Yeah, I know the interface is not good enough But you can see the table using the option Actions/View data.
Thank you for testing!!!
Cheers,
Joubert

joubertvasc said:
Thank you kuzco! Everything will be verifyed
Are you using version 1.0 or 1.1?
Cheers,
Joubert
Click to expand...
Click to collapse
I was running V1.0, but I have tested now V1.1. The problems still exists.
Regards
kuzco

[Q] Sending links to the blackstone

This has been something that has bugged me ever since I started using WinMo, hopefully there is a simple solution that I have just over looked.
1) If im browsing the web on my laptop, I have to go out for whatever reason, is there a quick/simple method of sending the web address to my blackstone? ie without having to type it in one the phone. So that I can continue browsing on the move?
Ideally it would be as simple as right clicking on the webpage > Send to > Blackstone, then having the same webpage open on the blackstone... Is there any way to do this? Is it even possible?

Doesn't ActiveSync (check Favorites) work for you?

You can also use http://www.mymobiler.com/
It works over ActiveSync and WIFI (well at least within your own subnetwork .

Alternatively you could create a QR-barcode from the URL (for example on this page http://qrcode.kaywa.com/) and then use a codereader on your cell phone (QuickMark http://www.quickmark.cn/ works great on the Blackstone).

fwt said:
Doesn't ActiveSync (check Favorites) work for you?
Click to expand...
Click to collapse
From IE7 > Tools > Create mobile favorite > I had tried that on my Atom Life device, but it never worked properly. The mobile favorites would sync, but then the next time I connected the device, to my PC they would vanish.
Also, wouldnt this only create a favorite for IE mobile? Plus the hasstle of having to delete the favorite if it was just one article I was reading.
It would just be nice to have the option to "throw" my current page over to my Blackstone. From IE7 and have it open in opera.

spasovxda said:
You can also use http://www.mymobiler.com/
It works over ActiveSync and WIFI (well at least within your own subnetwork .
Click to expand...
Click to collapse
cool, thats an option. I'll check it out. Cheers.
K_Hismoom said:
Alternatively you could create a QR-barcode from the URL (for example on this page http://qrcode.kaywa.com/) and then use a codereader on your cell phone (QuickMark http://www.quickmark.cn/ works great on the Blackstone).
Click to expand...
Click to collapse
This is actually the method I have been using for the past couple of weeks. It works well. But I can't help but feel like there are still more steps to take than should required.
My initial post was inspired by being half way though reading an article on a website I wouldnt usually visit. At which point a friend who I was meeting pulled up outside an beeped his car horn (meaning "im not coming in, hurry up"). As a result I had to leave my laptop on until I returned.
With all of microsofts talk about widgets etc, it just seems odd that there is no quick and easy way to send a simple link from a Vista computer to a WinMo device without having to load up other programs. E-mailing the link to myself is another solution, but again... it just seems like a long road for a shortcut.