Database Users

Newbe needs assistance with UK Orange M600

Hi all,
I have the Orange M600 which has numerous issues - Orange insist there is no new firmware out even though the one that comes with it is ancient
I would like to upgrade my Rom - I know *absolutely nothing* about doing so though, but I have spent a few hours reading through these forums trying to learn what to do.
I have learnt about the G3 and G4 models (I have a G4).
Question 1) Is this a good rom to put on? -> http://forum.xda-developers.com/showthread.php?t=283965&highlight=m600
Question 2) Will I need to do anything else to my device to flash it? My device is probably CID locked.
Question 3) Can I backup my original ROM and flash it back if it goes wrong?

So...what is it about the current ROM that you are not happy with?
You can end up with a very expensive paperweight by trying to fix something that ain't broke.
Be very careful. I've done a few hacks and tweaks but the one thing I have not done is flash the ROM - too risky if you ask me.

TheBrit said:
So...what is it about the current ROM that you are not happy with?
You can end up with a very expensive paperweight by trying to fix something that ain't broke.
Be very careful. I've done a few hacks and tweaks but the one thing I have not done is flash the ROM - too risky if you ask me.
Click to expand...
Click to collapse
We have many devices with the same issue. Constant freezing on the today screen when you wake the device from standby, sometimes the phone takes a while to connect (i.e when it's ringing you press the green button but it takes several seconds before you can hear people on the other end of the phone), sometimes the phone takes ages to dial...
Basically we'd like to try updating the firmware on one of our devices to see if it makes any difference.

In that case - click the XDA-Wiki link at the top of the page and read the instuctions there. Some have reported that the later ROMS are more responsive but as I said - it's a risky process.
I run mine overclocked and it's stable and responsive. No real problems.

Application Unlock for Orange SPV m600
Hi,
Not sure if this is the right place for this post.
I need to application unlock my Orange SPV M600. Any one know where or how i do this???
Lobes

lobes said:
Hi,
Not sure if this is the right place for this post.
I need to application unlock my Orange SPV M600. Any one know where or how i do this???
Lobes
Click to expand...
Click to collapse
Hey...check out:
http://wiki.xda-developers.com/index.php?pagename=Prophet_Unlock_Sim

Thanks,
But isnt that just a SIM unlock and not an application unlock??

fungus25200
I need a sim unlock so I can use another network my rom version is 2.10.1.22WWE and operator version is 13.10.1.107

Help needed updating/repairing mda vario pleease

Hello all,
I am really sorry for being a noob, and i am also sorry if this is answered elsewhere but i have looked and havent got a clue what im doing. I have a T-Mobile MDA Vario and am having all sorts of problems with it. I was told that if I upgrade my rom it should sort it out plus i also like the though of having WM6.
I have looked round the forums and it looks like i have a G4 device(IPL 2.21.0001). My current rom version is 2.21.2.6 wwe, radio version 02.19.11.
It has never been altered by myself and i have had it since new so it is not unlockedin any way.
Also i am running Vista on my PC.
Hope thats all the info you need.. Hope to hear back from some kind person shortly.
many thanks...Tim

what is you SPL, thats the important info. go to bootloader by completely turning off you phone (taking out battery, and putting it back in after about 10 seconds), and holding the camera button while you turn it on. It will say your SPL.
you have to first CID unlock you phone, BEFORE you install any custom ROM. im not sure if things have changed now, but as far as I know, the only way to CID unlock a G4 device is to pay for it, I don't think anybody has found another way yet. I think its about 40 US dollars. I think its at http://www.imei-check.co.uk after that, you can install special G4 ROMS. It has to be G4 safe, if you use a G3 ROM, you will ruin your phone.
IM NOT SURE ABOUT ANY OF THIS, it's just what I think.

CINGULAR 8525 (aka herm100) unlocking FRUSTRATION IS MAKING ME ###[email protected]#$#

Hi folks...
so i sold my blackberry pearl and added 100.00 for a nice cingular 8525. i needed to unlock this phone so i came across "pof" tutorial and methods of unlocking myself.. i went through the process thinking i did have 1.04 radio because when i go to bootloader (tri color screen) it shows IPL 1.04 and spl-shipped.. so i thought 1.04 was the version... the tutorial mentions spl-xxx is the version but mine says shipped.. (whats with that? ) so basically i followed the steps and later got sucess word and punched in the code given by "pof" but it didn't work and now says "you have tried 6 times and wait until time"
so i don't want to screw this up anymore so come to you guys for help..
so i went to the device system menu
and radio version says 1.48
rom version is 3.0
win 6 mobile
phone is cingular and my sim card is tmobile
so i guess i have 1.48 and not 1.04 that is needed to unlock myself... so i heard if i don't have 1.04 i need to get the imei number and get the unlock code so i went to http://www.wirelessunlocks.com/ and hopefully the code they give me will work.. i paid 7.99 for this service..
so my questions.
1. since i followed "pof" instructions and got sucess at the end.. despite having a 1.48 radio version... did i permanently damage my phone? or i think the word is "bricking".
2. Wirelessunlocks.com i used... to get the code number (which hasn't come yet) does these services have a high sucess rate?
3. if the wirelessunlocks.com service doesn't seem to work.. what are my other options? perhaps i can downgrade to 1.04 from 1.48 ? or any method so i can start using this phone will be great.. has been very frustrating...process but i'm learning

I hope this helps!
When I first unlocked AT&T 8525 my phone, I read up all the articles on how it could be bricked, and by the time I finished reading them, I figured, well.....if my phone bricks....then, it was meant to be, lol. I used the pof unlocker v3a the day I got my phone, and it worked. I have no idea what version of spl, or ipl I had before, but the way that they talk about it on the site, it seems that its safe to use with any HERM100 phone. Oh, and I found this video on the pof site. http://youtube.com/watch?v=4lA9S9ELSAU Let me know how things go! Oh, and when your phone is a brick, it means that it is useless, whether it be that when you turn it on, it freezes at the startup screen and never loads windows, or whether it doesnt turn on anymore, or any state that seems hopeless. I think that if your phone enters a state where it keeps going to the bootloader mode, that it still can be saved, but I'm not 100% sure. If anyone else reads this and disagrees, please correct me! Oh, and when you get your phone unlocked, feel free to contact me about any cool things you wanna do to it. I got about 6 months of experience now, lol. Doesn't come close to some of the senior members who create their own roms now, lol, but I can still be of help!

Ok, monkeyisland90, radio rom has got NOTHING to do with unlocking the hermes. Its the IPL & the SPL. To see these go into bootloader screen. How to do so are in Pofs instructions.... Follow the instructions STEP by STEP and you cant go wrong. A large number of people have done this successfully (including myself) so you should have no trouble. Most people "skip ahead" and thats how you will get into hot water. Try again and I think, if you go step by step, you will have no trouble. Dont forget to install hard SPl on before upgrading roms though. It'll help if things go wrong( and they will at least once) to recover your Phone. If the radio rom seems to work ok and there is no real battery drain LEAVE IT ALONE... This is probably the riskiest part to flash as a failure generally means a brick. Most, if not all, cooked roms dont include a radio so can be considered safer to flash. Personally I prefer to use the sd card method of flashing as there has been less problems for me with this method but it comes down to personel preference. Happy Flashing......

but when going to the bootloader (tricolor screen) it says
ipl-1.04
spl-shipped..
and pof says that after spl-xxx it should be your rom version.. but mine says shipped.. what the heck does that mean?
is this where i need to do the hard spl?

hey monkeyisland90, did you ever get your unlock code from wirelessunlocks.com?
I stumbled across them while googling unlock sites...7.99 is a tough deal to beat, but the site was only registered in February and looking through HoFo, here and googling wirelessunlocks.com, yours is the only first-person account I've seen of ordering through them.
So...are they any good?

Wireless Unlocks are a scam
They are a scam.
After you pay them you will get this email
Dear Customer
We are sorry to tell you that on this occasion we have no solution
available to unlock your phone. We apologise for this and are working
very hard to keep up to date and produce methods to unlock as many
phones as we can.
And this will be at the end
You will be issued a full refund from ourselves, please allow up to
seven days for this to reach your bank account (although it is
usually faster than this). The refunds generally go straight into
your card account or bank account.
And that will be the last you will hear from them.
They will not respond to emails at all after that.
BUYER BEWARE
Spead the word

Haxta said:
They are a scam.
After you pay them you will get this email
Dear Customer
We are sorry to tell you that on this occasion we have no solution
available to unlock your phone. We apologise for this and are working
very hard to keep up to date and produce methods to unlock as many
phones as we can.
And this will be at the end
You will be issued a full refund from ourselves, please allow up to
seven days for this to reach your bank account (although it is
usually faster than this). The refunds generally go straight into
your card account or bank account.
And that will be the last you will hear from them.
They will not respond to emails at all after that.
BUYER BEWARE
Spead the word
Click to expand...
Click to collapse
Interesting...I ended up trying them, and got that email, but they did issue me a refund!

Here is how to put on the latest spl
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
for anything else you ever want to do to your phone, check here
http://www.mrvanx.org/thg/

Cingular 8525
well after i did the flashing to my pda and installed wm 6.5 it was working until this morning i turned on and it freezes at the startup screen and never loads windows... is it possible to fix, waht i have to do?
Thanks

just apply Hardreset or simple softresets, wich rom do you have? maybe your abatt is dead... maybe you install something weird
it could have many diferent issues about
maybe you dont flash the shipped stripped rom att wm6 before the 6.5?

SD Card slot.

Problem just started on my Uni.
SD card will no longer stay in. I can hear the little click (though it doesn't sound as positive as it did) as it goes in, but it doesn't stay there - just springs out.
Anyone ever experienced this before?
Better still, anyone have a fix?
The Uni is useless to me without it.
Thanks.

kryogenik said:
Problem just started on my Uni.
SD card will no longer stay in. I can hear the little click (though it doesn't sound as positive as it did) as it goes in, but it doesn't stay there - just springs out.
Anyone ever experienced this before?
Better still, anyone have a fix?
The Uni is useless to me without it.
Thanks.
Click to expand...
Click to collapse
Maybe you already done this: Have you tried with another sd card?
Still same?
If yes try to see inside to confirm that nothing is broken at simple view
I´m sure someone will come with a wiser sollution
Good luck,

orb3000 said:
Maybe you already done this: Have you tried with another sd card?
Still same?
If yes try to see inside to confirm that nothing is broken at simple view
I´m sure someone will come with a wiser sollution
Good luck,
Click to expand...
Click to collapse
Hi - thanks for the reply. I've found replies are few and far between sometimes..
Yes, I've tried other cards. This latest one (the one I *think* may have broken it) is a legitimate 8GB card bought from a reputable high street store. A waste of damn time anyway because the Uni will only see 4GB of it, depsite doing something to make it see more not long ago (I forget what it was). I Googled the expansion slot problem and found a quick-fix. Add a layer or two of Scotch tape. The card becomes thicker and 'stays' in the slot. It works very well, but it's not my ideal long-term fix.
All that said, my brand new Universal arrived this morning (£60 GBP would you believe..) so I guess now I'll be reading up on how to flash the ROM.
I haven't flashed firmware on a Windows handset since my HTC Canary 7 years ago..

kryogenik said:
Hi - thanks for the reply. I've found replies are few and far between sometimes..
Yes, I've tried other cards. This latest one (the one I *think* may have broken it) is a legitimate 8GB card bought from a reputable high street store. A waste of damn time anyway because the Uni will only see 4GB of it, depsite doing something to make it see more not long ago (I forget what it was). I Googled the expansion slot problem and found a quick-fix. Add a layer or two of Scotch tape. The card becomes thicker and 'stays' in the slot. It works very well, but it's not my ideal long-term fix.
All that said, my brand new Universal arrived this morning (£60 GBP would you believe..) so I guess now I'll be reading up on how to flash the ROM.
I haven't flashed firmware on a Windows handset since my HTC Canary 7 years ago..
Click to expand...
Click to collapse
Well hope you can solve the issue!
Good to hear that you have a new Uni!!
May I know where you´ve got that great deal? and if possible I would like to buy one!
For flashing instructions read here: http://wiki.xda-developers.com/index.php?pagename=Uni_ROM_Upgrade
And personally I recommend you Tomal v.8.5 the fastes and stable 6.1!
Good luck!

Hi again.
It was a UK eBay "Buy It Now" offer.
I was browsing Uni/Exec/SPV etc and refreshing waiting for a particular auction to end when this one just popped up with charger, new battery, leather case and 3 x stylus. It looks/smells brand new. Incredibly lucky I know.
Thanks for the advice on the ROM. I'm just reading through where/how/why and whatnot now. I have a G3 device so I think I can just go ahead and flash.
But as I say, I'm reaqding through the Wiki and the threads. I have seen others mention Tomal's ROM. I'm looking for as Vanilla as possible. This unit for me will ideally run TCMP as best as it can and Vijay's FullScreen along with terminal services. Everything else is a very distinct second priority. I have a Wizard I use for TomTom and a Nokia N95 for an everyday phone. This just needs to be a media player and a remote access unit for my desktop machine. Apart from a file explorer, I could pretty much do without everything else.
Thanks again.

Orb, that Wiki entry needs updating somewhat. There's loads of issues not covered there. The Tomal is a single installer and presumably doesn't need the programs mentioned (though it briefly mentions that at the end). There should be a distinction made there. Some ROM's need these programs, some are single installers, if so ... ... ... ... etc. Not some half-assed brief mention with no other instructions. I presume I just double click the installer in Bootloader and leave it to it???
It says I need to CID/EROM unlock but fails to explain what these are?! More searching shows that it's extended ROM and SIM lock that need removing. What point is there using acronyms for a supposed 'newbie' tutorial..
My unit won't run the EROM program complaining of needing a new NET framework.
This isn't mentioned. Not that you may get this error, what it is, or what you need to do if you do.
The SIM unlock won't run either. Once my unit is in bootloader mode and showing 'serial' I plug in the USB lead and it shows 'USB'. I run the SIM unlocker and it eventually says 'this is not for your device'. More searching and I find I need to be using XP to do this, not Windows 7 or Vista.
Searching about I see loads of people with similar problems. If the Wiki was updated, then when people pointed users to it, then it would do it's job (which is presumably to help people and prevent the forum being full of questions, which it obviously is..).
Looks like I need to get onto an XP machine and do some serious searching through the sometimes 50 page long threads before I risk bricking my Uni.
I'm more than happy to do research if that's what I need to do, but what's the point in promoting a Wiki if you have to ignore half of what it says and find out for yourself anyway?
Not a rant at you by the way. Just a post made from observations.
Cheers.

Hi kryogenik!
I completely agree with you. My Uni came to me from uk with WM6.0, so I supposed it was unlocked and I made various flashes with no fear.
With a friend of mine Uni things were different: it had a stock WM5 and I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
@orb3000: when a newbie comes here asking for instruction on how to flash you always make a ctrl+c ctrl+v with wiki link... Why don't you try reading it with "newbie's eyes"? As kryogenik said, I won't attack you, it's just my thought...
Cheers...

kryogenik said:
Orb, that Wiki entry needs updating somewhat. There's loads of issues not covered there. The Tomal is a single installer and presumably doesn't need the programs mentioned (though it briefly mentions that at the end). There should be a distinction made there. Some ROM's need these programs, some are single installers, if so ... ... ... ... etc. Not some half-assed brief mention with no other instructions. I presume I just double click the installer in Bootloader and leave it to it???
It says I need to CID/EROM unlock but fails to explain what these are?! More searching shows that it's extended ROM and SIM lock that need removing. What point is there using acronyms for a supposed 'newbie' tutorial..
My unit won't run the EROM program complaining of needing a new NET framework.
This isn't mentioned. Not that you may get this error, what it is, or what you need to do if you do.
The SIM unlock won't run either. Once my unit is in bootloader mode and showing 'serial' I plug in the USB lead and it shows 'USB'. I run the SIM unlocker and it eventually says 'this is not for your device'. More searching and I find I need to be using XP to do this, not Windows 7 or Vista.
Searching about I see loads of people with similar problems. If the Wiki was updated, then when people pointed users to it, then it would do it's job (which is presumably to help people and prevent the forum being full of questions, which it obviously is..).
Looks like I need to get onto an XP machine and do some serious searching through the sometimes 50 page long threads before I risk bricking my Uni.
I'm more than happy to do research if that's what I need to do, but what's the point in promoting a Wiki if you have to ignore half of what it says and find out for yourself anyway?
Not a rant at you by the way. Just a post made from observations.
Cheers.
Click to expand...
Click to collapse
Yeah, as dear Admin said "Wiki is a strange place"
Why not try to post this request on the proper place on general section
"request to mods by users"
I think that will be the place to have an answer
Cheers,

Auzman said:
I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Click to expand...
Click to collapse
Exactly. There are some very odd ideas about what a tutorial is.
I'm hardly a newbie myself, but when there's something so valuable at risk it obviously makes sense for things to be right? Why bother otherwise.
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
Click to expand...
Click to collapse
Well, I've got the extended ROM showing. I can understand that needing to be done - perhaps the new ROM needs it writable. I can't for the life of me imagine why the unit needs to be SIM unlocked though?? I have seen posts from people who have SIM unlocked AFTER a ROM flash so I'm thinking perhaps this isn't the case?
Did you do either of these? Or maybe your unit was already in this state?
orb3000 said:
Yeah, as dear Admin said "Wiki is a strange place"
Why not try to post this request on the proper place on general section
"request to mods by users"
I think that will be the place to have an answer
Click to expand...
Click to collapse
Thanks Orb. But it's not a request. I have a feeling it wouldn't be acted upon anyway. I can't be the first to point out inconsistencies.
I run a website and Vbulletin forum too. The day I have to rely on someone else to tell me it's not right is the day I give it up.
It sounds like I'm bashing XDAD. I'm really not. It's been a lifeline for me numerous times (the forum I must stress, not the WIKI).
I'm just surprised that such a fantastic resource is being let down by the one thing it should be proud of.

Auzman said:
Hi kryogenik!
I completely agree with you. My Uni came to me from uk with WM6.0, so I supposed it was unlocked and I made various flashes with no fear.
With a friend of mine Uni things were different: it had a stock WM5 and I tried reading wiki to get some answers, but the only thing I obtained was confusion.
I'm really not a newbie on computer systems, and I assure that the wiki has to be freshed out!
Turning back to the wm5 uni, I simply ran the executable from Tomal (8.2) and everything worked fine. So... what is really needed to?
@orb3000: when a newbie comes here asking for instruction on how to flash you always make a ctrl+c ctrl+v with wiki link... Why don't you try reading it with "newbie's eyes"? As kryogenik said, I won't attack you, it's just my thought...
Cheers...
Click to expand...
Click to collapse
I also was a newbie sometime, and I found that if everybody gives me easyly all my questions and problems I will not learn never! and I will get used to demand that people has to give me the answer right away!
So no my friend, I understand is not an attack and I´m also friendly:
But said that I´ll push newbies to do it by themselves, even if it´s a little bit more difficult
At the end they as me wil apreciate it, because we learn to SEARCH and READ

lol.
Cute idea but there's a big difference between encouraging someone to help themselves and pointing them to articles that do the exact opposite to what they're supposed to do (i.e. confuse rather than assist).
Everyone needs to start somewhere, but you NEED to have at least some correct and up to date information to send you on your way.
You wouldn't give someone a manual for a 1972 Ford and tell them to read it so they can fix their 2009 model.
Anyway, that's my opinion on it. I hope one day someone has time to add missing bits to the Wiki. I appreciate it could be a major task. As I said, essentially this will save on hundreds of people posting the same problems over and over again and people getting sick of replying to the same posts over and over again.
It's simple common sense.
OUT

Agree mate
I´ll try to find out how we can update the Wiki
Have a good day

New to this...any help appreciated

Alright...so here goes. I have been out of the smartphone market for some time now and am getting this awesome phone tomorrow. I am friggin excited! Feels like Christmas in the summer! Verizon tells me that it will already come with the 6.1 update installed. Anyone gotten one recently to verify this, and how do I tell when I get it...also how can I tell the radio that it has? I also already wanna mod this machine, and although I am selfproclaimed computer savvy, I am a little nervous about bricking the phone. I think I def want either an iCRAP setup to piss off everyone at work, or nfsfans 6.5....although I would like to have someone walk me through it. I have to say, everyone on this forum has done an excellent job with their machines and I am impressed. Also, I don't know that this will even be an issue, but it will still need to function as a phone and pda...as I have read in a few different places that some cant use their phone function anymore, etc. And I definitely wanna get the GPS running ASAP, due to travel on the job. Any help will be greatly appreciated, and I will def help out anyone on here if I can. I also am not sure about when and when not to let customizations run...any help with that would be awesome too

i am also getting this phone from vzw thursday, they told me it comes standard with wm6.0 idk or care. as soon as i get it im gonna flash a custom rom.

Hey there, I'm a fellow Verizon user. It was kind of nerve-wracking flashing the ROM for the first time, but its really NBD once you get into it (be sure and try android too!).
Do your reading first, there are tutorials all over the place. Something to remember about customizations - Don't let them run on any official Verizon updates you see floating around the internet, as they will cripple your GPS. Don't let them run on any ROM designed for another carrier. If you're flashing a generic or Verizon-specific CUSTOM ROM, let them run.
And you can check in settings to see your radio and OS version and all that (under "about" I think, correct me if I'm wrong)
Have fun!

so if i run mr1 from verizon to get to wm6.1, then I SHOULD NOT not run customizations. What buttons do I press to do a hard reset before that comes up? But, if I were to do NFSFAN's 6.5 rom, then I SHOULD let customizations run. Also, could someone point me to a set of CLEAR directions on doing the flashes? I have read a bunch of them, and it seems they are all missing little parts.....probably something so familiar to the editor, they just forget to include in the steps.

Yes, the lack of CLEAR instructions as a stickey is a real problem on a lot of boards. I've read threads over 300 posts in order to get solid info. I don't mind searching for info, but jeesh, guys it is unbearable. Granted some of this stuff is not for the faint of heart, but there can be so much info, and sometimes it is often confusing and contradictory. The SR. members and the Admins need to get their heads together and take a month to provide the community some solid resources, and weed out some of the erroneous info here. We want to make having this phone FUN and Practical. A Case in point is trying to get GPS working. Have you guys looked at all the info on here about this. Granted there is variety of carriers, but it shouldn't be brain surgery.
Also chevyspd,you want to do a SOFT reset before the customizations. Use your stylus to depress the small hole in the bottom of the phone before they run. Should be golden. A HARD reset will restart the flashing process from scratch.

10-4....so only do a soft reset by only pressing the button in the hole on the bottom before customizations runs. That is very contradictory from about 50 other posts I've read so far. A whole bunch of them say to do a HARD reset, but I will remember not to. But, when I do a custom rom like NFSFANS, I don't have to do a reset at all....correct?

You wouldn't believe how many times I got flamed for that same kinda comment on other forums.....interestingly though....Also...if I flash to NFSFANs 6.5, are the cubes still active, or is that something from HTC that gets written over with a new rom?

So, my new phone already has 6.1 right outta the box. Interestingly enough, it went to the customizations screen as soon as I powered the phone up, so I immediately hit the soft reset. How can I tell if what I did worked, and if it didn't, how can I fix it so I can use 3rd party gps programs?

Wow; a lot of questions. I'm not sure about NFSFAN's rom. To see if the gps works, make sure you have the Settings>phone>services>location is set to on. Then make sure the external gps setting is set to Comm4, then hardware NONE, baud 4800, and allow Windows to manage gps. Do a Google search for HTC QuickGPS if it's not already on your phone (varies from carrier to carrier) and Install it; Run it, outside and allow it 10 minutes to get a lock. If gps is working, then you should be golden. You will probably need to turn the radio on after every re-boot; and be aware that leaving the radio going WILL drain you battery faster than usual. All this assumes you are using the stock rom, and not one of the custom ones; each to those varies, some work out of the box so to speak, some of them require tweaking.

Funny i just got the phone yesterday to, but i actually already had it for about a year lol, just replaced the one i broke on saturday. But honestly the first thing i did with the phone is put in my SD card and boot up Android....
I really want my GPS back again but i dont really want to go through the hassle of unlocking, flashing, unlocking, and flashing, but if you deem it neccessary. and maybe i will to one day soon. lol heres the link
http://wiki.ppchaven.com/index.php?title=Pocket_PC_WIki:FIX_VERIZON_GPS
chevyspd said:
You wouldn't believe how many times I got flamed for that same kinda comment on other forums.....interestingly though....Also...if I flash to NFSFANs 6.5, are the cubes still active, or is that something from HTC that gets written over with a new rom?
Click to expand...
Click to collapse
The cube is way back when man, sorry but those things are old school already. lol so when you flash to the 6.5 NFSFAN rom it will not have the cube, but it will have titanium and manilla 2d, which in my opinion are awesome replacements
chevyspd said:
But, if I were to do NFSFAN's 6.5 rom, then I SHOULD let customizations run?
Click to expand...
Click to collapse
Yes, and remember to install the Verizon cab in his post :thumbsup:

Well, the phone didn't come with the cube anyways...lol...so anywho...I think the GPS is working anyways...just gotta find a free GPS like vznavi or something.