Hi all,
Trying to get Hitchhiker, and WiFiFoFum onto my O2 XDA Exec. The pre-requisite for these applications is Microsoft's .NET Compact Framework 2.0. However, when attempting to the install this, I receive the following error message on the device, "Installation error. Stop all applications and processes, maximze[sic] available storage space and run installation again. Support Info: 4."
Has anyone encountered this before?
Microsft.NET CF 2.0.LOG shows:
Code:
31/01/2006 19:04:58: Entered Install_Init().
First Call: Yes
Previously Installed: No
Installation folder is: '\Program Files\.NET CF 2.0'.
31/01/2006 19:04:58: Build 2.0.5238.00
31/01/2006 19:04:58: Device CPU: 'ARMV4I', 05020000 (84017152)
31/01/2006 19:04:58: PocketPC 5.01
31/01/2006 19:04:58: Our trust level is: 2
31/01/2006 19:04:58: User LCID: 2057
31/01/2006 19:04:58: System LCID: 2057
31/01/2006 19:04:58: Invoker's command line: '0xd26ba0ae-0'
31/01/2006 19:04:58: Memory status, K --------------------------
31/01/2006 19:04:58: Load : 61
31/01/2006 19:04:59: Physical : 51128
31/01/2006 19:04:59: Physical free : 20052
31/01/2006 19:04:59: Virtual : 32768
31/01/2006 19:04:59: Virtual free : 30848
31/01/2006 19:04:59: Storage status, K -------------------------
31/01/2006 19:04:59: Available to us: 22373
31/01/2006 19:04:59: Total storage : 44546
31/01/2006 19:04:59: Available total: 22373
31/01/2006 19:04:59: -------------------------------------------
31/01/2006 19:04:59: About to process registry.
31/01/2006 19:04:59: Opened CF registry key OK.
31/01/2006 19:04:59: Looking for upgradeable installations for version '2.0.5238.00'
31/01/2006 19:04:59: Got version value '2.0.5238.00'
31/01/2006 19:04:59: Upgradeable installation detected.
31/01/2006 19:04:59: Older upgradeable installation detected, record deleted.
31/01/2006 19:04:59: Got version value '1.0.4292.0'
31/01/2006 19:04:59: Added new CF version value '2.0.5238.00'.
31/01/2006 19:04:59: CF registry key closed.
31/01/2006 19:05:06: Entered Install_Exit().
Failed Dirs: 0
Failed Files: 0
Failed RegKeys: 0
Failed RegVals: 0
Failed Shortcuts: 0
31/01/2006 19:05:06: Memory status, K --------------------------
31/01/2006 19:05:06: Load : 61
31/01/2006 19:05:06: Physical : 51128
31/01/2006 19:05:06: Physical free : 20012
31/01/2006 19:05:06: Virtual : 32768
31/01/2006 19:05:06: Virtual free : 30848
31/01/2006 19:05:06: Storage status, K -------------------------
31/01/2006 19:05:06: Available to us: 22372
31/01/2006 19:05:07: Total storage : 44546
31/01/2006 19:05:07: Available total: 22372
31/01/2006 19:05:07: -------------------------------------------
31/01/2006 19:05:07: About to verify reference count.
31/01/2006 19:05:07: PocketPC 5.01
31/01/2006 19:05:07: About to process alternative files.
31/01/2006 19:05:07: PocketPC 5.01
31/01/2006 19:05:07: Processing alternative file: '\Program Files\.NET CF 2.0\cgacutil.exe.-500~-500~ARMV4I'.
31/01/2006 19:05:07: Special file extension: '.-500~-500~ARMV4I'.
31/01/2006 19:05:07: File is intended for OS: -500 to -500, CPU: ARMV4I
31/01/2006 19:05:07: Device CPU: 'ARMV4I', 05020000 (84017152)
31/01/2006 19:05:07: CPU matches.
31/01/2006 19:05:07: Version MIN ignored.
31/01/2006 19:05:07: Version MAX ignored.
31/01/2006 19:05:07: Querying version of file '\Program Files\.NET CF 2.0\cgacutil.exe.-500~-500~ARMV4I'.
31/01/2006 19:05:07: Get version failed.
31/01/2006 19:05:07: Opened source file '\Program Files\.NET CF 2.0\cgacutil.exe.-500~-500~ARMV4I' (E:00000003)
31/01/2006 19:05:07: Time stamp verification suggests no overwrite.
31/01/2006 19:05:07: Suggestion: do not overwrite.
31/01/2006 19:05:07: Delete file '\Program Files\.NET CF 2.0\cgacutil.exe.-500~-500~ARMV4I': failed.
31/01/2006 19:05:07: Processing alternative file: '\Program Files\.NET CF 2.0\mscoree.dll.-500~-500~ARMV4I'.
31/01/2006 19:05:07: Special file extension: '.-500~-500~ARMV4I'.
31/01/2006 19:05:07: File is intended for OS: -500 to -500, CPU: ARMV4I
31/01/2006 19:05:07: Device CPU: 'ARMV4I', 05020000 (84017152)
31/01/2006 19:05:07: CPU matches.
31/01/2006 19:05:07: Version MIN ignored.
31/01/2006 19:05:07: Version MAX ignored.
31/01/2006 19:05:07: Querying version of file '\Program Files\.NET CF 2.0\mscoree.dll.-500~-500~ARMV4I'.
31/01/2006 19:05:07: Get version failed.
31/01/2006 19:05:07: Opened source file '\Program Files\.NET CF 2.0\mscoree.dll.-500~-500~ARMV4I' (E:00000003)
31/01/2006 19:05:07: Time stamp verification suggests no overwrite.
31/01/2006 19:05:07: Suggestion: do not overwrite.
31/01/2006 19:05:07: Delete file '\Program Files\.NET CF 2.0\mscoree.dll.-500~-500~ARMV4I': failed.
31/01/2006 19:05:07: Attempting to remove old files from GAC.
31/01/2006 19:05:07: Delete GAC list file: success
31/01/2006 19:05:08: Run: '\Windows\cgacutil.exe /silent /refresh ', error code: 0 (00000000), exit code: -1 (FFFFFFFF)
31/01/2006 19:05:08: Refreshed GAC.
31/01/2006 19:05:08: About to add files to the GAC.
31/01/2006 19:05:09: GAC list file opened.
31/01/2006 19:05:09: Writing UTF8 signature: done.
31/01/2006 19:05:09: Adding file 'mscorlib.dll': added.
31/01/2006 19:05:09: Adding file 'system.dll': added.
31/01/2006 19:05:09: Adding file 'system.drawing.dll': added.
31/01/2006 19:05:09: Adding file 'system.messaging.dll': added.
31/01/2006 19:05:09: Adding file 'system.web.services.dll': added.
31/01/2006 19:05:09: Adding file 'system.windows.forms.dll': added.
31/01/2006 19:05:09: Adding file 'system.windows.forms.datagrid.dll': added.
31/01/2006 19:05:10: Adding file 'system.xml.dll': added.
31/01/2006 19:05:10: Adding file 'system.net.irda.dll': added.
31/01/2006 19:05:10: Adding file 'system.data.dll': added.
31/01/2006 19:05:10: Adding file 'microsoft.visualbasic.dll': added.
31/01/2006 19:05:10: Adding file 'microsoft.windowsce.forms.dll': added.
31/01/2006 19:05:10: Adding file 'Microsoft.WindowsMobile.DirectX.dll': added.
31/01/2006 19:05:10: Adding file 'CustomMarshalers.dll': added.
31/01/2006 19:05:10: Closed list file.
31/01/2006 19:05:12: Run: '\Windows\cgacutil.exe /silent /id \Windows\Microsoft .NET CF 2.0.GAC', error code: 0 (00000000), exit code: 0 (00000000)
31/01/2006 19:05:12: GACing: completed.
31/01/2006 19:05:12: About to verify installation...
31/01/2006 19:05:12: Querying version of file '\Windows\cgacutil.exe'.
31/01/2006 19:05:12: Version determined to be: 1.0.4292.0.
31/01/2006 19:05:12: Get version completed.
31/01/2006 19:05:12: Shared files version verification: failed.
31/01/2006 19:05:12: Verification failed. Installation aborted.
31/01/2006 19:05:12: Memory status, K --------------------------
31/01/2006 19:05:12: Load : 62
31/01/2006 19:05:12: Physical : 51128
31/01/2006 19:05:12: Physical free : 19872
31/01/2006 19:05:12: Virtual : 32768
31/01/2006 19:05:13: Virtual free : 30848
31/01/2006 19:05:13: Storage status, K -------------------------
31/01/2006 19:05:13: Available to us: 22367
31/01/2006 19:05:13: Total storage : 44546
31/01/2006 19:05:13: Available total: 22367
31/01/2006 19:05:13: -------------------------------------------
i remember summat going bit wrong when i installed it last month on my MdaPro... think it was down to low memory... soft reset the device then try again..
I got that trying to install wififofum this morning, soft reset & tried again & it jumped straight to life.
(Of course, I had to update .Net for my pc so that i could get the compact one to consider installing)
That worked for me too. Odd one, but cool now
Cheers.
Hi all,
I'm having a real strange issue with my Liquid (A100). Everytime someone call me, it start to ring, but the phone seems frozen (I dont know who call me, the phone freeze before the contact show up).
I've tried to reflashed it with official Eclair rom, then Froyo, still the same issue.
I've just changed my sim card, can it be the cause ?
Thanks for your help !
It seems to be worse, now it can't boot. Sometimes it boot forever, sometimes when the PIN code is asked it freezes.
What the hell ?
edit :
I've just tried to remove battery, replace it, plug USB, and vol down + camera + power : Now I have a partition checksum (never seen that ?) that tells me everything is okay.
This is the logcat when someonecall :
Code:
(...)
D/phone settings( 208): Sim State = READY
D/CallFeaturesSetting( 208): handleQuerySCMessage: query SC request complete
I/ActivityManager( 115): Displayed activity com.android.phone/.CallFeaturesSetting: 806 ms (total 3322 ms)
D/CallFeaturesSetting( 208): onPreferenceTreeClick()
I/ActivityManager( 115): Starting activity: Intent { act=android.intent.action.MAIN cmp=com.android.phone/.GsmUmtsCallOptions }
I/ActivityManager( 115): Displayed activity com.android.phone/.GsmUmtsCallOptions: 304 ms (total 304 ms)
D/phone settings( 208): Sim State = READY
D/CallFeaturesSetting( 208): handleQuerySCMessage: query SC request complete
D/GsmUmtsCallOptions( 208): onDestroy()
D/CallFeaturesSetting( 208): onPreferenceTreeClick()
I/ActivityManager( 115): Displayed activity com.android.settings/.Settings: 20899 ms (total 20899 ms)
D/phone settings( 208): onDestroy
D/Settings( 228): onDestroy()
I/ActivityManager( 115): Starting activity: Intent { act=android.settings.SETTINGS flg=0x10200000 cmp=com.android.settings/.Settings }
I/ActivityManager( 115): Displayed activity com.android.settings/.Settings: 410 ms (total 410 ms)
I/ActivityManager( 115): Starting activity: Intent { act=android.intent.action.MAIN cmp=com.android.settings/.ApplicationSettings }
W/DefaultSetting( 228): On updateState() , acerPreference:1
I/ActivityManager( 115): Displayed activity com.android.settings/.ApplicationSettings: 332 ms (total 332 ms)
I/ActivityManager( 115): Starting activity: Intent { act=android.intent.action.MAIN cmp=com.android.settings/.DevelopmentSettings }
I/ActivityManager( 115): Displayed activity com.android.settings/.DevelopmentSettings: 302 ms (total 302 ms)
W/InputManagerService( 115): Window already focused, ignoring focus gain of: [email protected]
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_NAME' not found
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_STATE' not found
W/Vold ( 58): Switch /devices/virtual/switch/usb_mass_storage event missing name/state info
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_NAME' not found
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_STATE' not found
W/Vold ( 58): Switch /devices/virtual/switch/usb_mass_storage event missing name/state info
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_NAME' not found
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_STATE' not found
W/Vold ( 58): Switch /devices/virtual/switch/usb_mass_storage event missing name/state info
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_NAME' not found
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_STATE' not found
W/Vold ( 58): Switch /devices/virtual/switch/usb_mass_storage event missing name/state info
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
W/InputManagerService( 115): Window already focused, ignoring focus gain of: [email protected]
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
I/dun_service( 73): Error while opening the file /sys/devices/platform/msm_hsusb/gadget/usb_state : No such file or directory
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_NAME' not found
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_STATE' not found
W/Vold ( 58): Switch /devices/virtual/switch/usb_mass_storage event missing name/state info
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_NAME' not found
E/NetlinkEvent( 58): NetlinkEvent::FindParam(): Parameter 'SWITCH_STATE' not found
W/Vold ( 58): Switch /devices/virtual/switch/usb_mass_storage event missing name/state info
W/DefaultSetting( 228): On updateState() , acerPreference:1
D/Settings( 228): onDestroy()
I/StorageNotification( 115): UMS connection changed to true (media state mounted)
W/Vold ( 58): Ignoring unknown switch 'MSM72K_UDC'
D/USBTTY ( 441): openConnection returns 1
D/Tethering( 115): sendTetherStateChangedBroadcast 1, 0, 0
D/Tethering( 115): interfaceAdded :usb0
E/lights ( 115): [set_led_light_battery]: Can not open device!
W/ActivityManager( 115): Timeout of broadcast BroadcastRecord{3051a4d0 android.intent.action.TIME_TICK} - receiver=android.[email protected]3030da10
W/ActivityManager( 115): Receiver during timeout: BroadcastFilter{3030dbd8 ReceiverList{3030db60 115 system/1000 local:3030da10}}
E/Watchdog_N( 115): Unable to open stack of tid 115 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 116 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 117 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 118 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 119 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 120 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 121 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 122 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 123 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 126 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 127 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 132 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 134 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 135 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 136 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 137 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 139 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 140 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 141 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 142 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 150 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 151 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 152 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 153 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 155 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 158 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 163 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 164 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 166 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 167 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 168 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 169 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 171 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 173 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 174 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 177 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 196 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 200 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 201 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 202 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 204 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 205 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 216 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 218 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 230 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 231 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 247 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 249 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 252 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 260 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 277 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 284 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 287 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 295 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 296 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 303 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 308 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 310 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 311 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 313 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 316 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 319 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 329 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 404 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 409 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 410 : 13 (Permission denied)
E/Watchdog_N( 115): Unable to open stack of tid 411 : 13 (Permission denied)
W/Watchdog( 115): *** WATCHDOG KILLING SYSTEM PROCESS: null
E/installd( 66): eof
E/installd( 66): failed to read size
W/ISensorClient( 71): transact([00000010]) failed
W/SensorService( 71): gWeakClients->notify failed
D/DxSecureClock( 74): Time has been modified.
I/ActivityThread( 441): Removing dead content provider: settings
I/ActivityThread( 278): Removing dead content provider: settings
I/ActivityThread( 222): Removing dead content provider: settings
I/ActivityThread( 208): Removing dead content provider: settings
I/ActivityThread( 228): Removing dead content provider: settings
I/ActivityThread( 203): Removing dead content provider: settings
I/ActivityThread( 470): Removing dead content provider: settings
I/ActivityThread( 568): Removing dead content provider: settings
D/DxSecureClock( 74): Updated deltas successfully.
I/ActivityThread( 480): Removing dead content provider: settings
V/AudioHardwareQSD( 693): AudioStreamOutMSM72xx::set(1, c, 44100)
V/AudioHardwareQSD( 693): AudioStreamOutMSM72xx::setParameters() routing=2
V/AudioHardwareQSD( 693): set output routing 2
V/AudioHardwareQSD( 693): Routing audio Device from 0x0 to 0x1
V/AudioHardwareQSD( 693): checkStandby() 1
V/AudioHardwareQSD( 693): getACDB, return ID 0x7
V/AudioHardwareQSD( 693): doAudioRouteOrMute: rx acdb 7, tx acdb 0
V/AudioHardwareQSD( 693): Switching audio out device: 0x1081513, rx_acdb: 0x7
V/AudioHardwareQSD( 693): Switching audio mic device: 0x1081512, tx_acdb: 0x0
V/AudioHardwareQSD( 693): AudioHardware pcm playback is going to standby.
E/AudioHardwareQSD( 693): setVoiceVolume called in wrong mode. Rejecting the call
I/SamplingProfilerIntegration( 694): Profiler is disabled.
I/Zygote ( 694): Preloading classes...
Any help ? I'm desperate
Same
Hi
I'm having the same problem but its only at some times, when someone calls and I take up nothing goes wrong the call also works good but if the other person ends the call my screen stays black!
And sometimes it starts rigning with call when noone is calling.
I have the acer liquid mini (e310)
I had installed the CM 11 m8 on my phone D805, wore philz recovery, but had to switch to TWRP to install the CM, and I had a backup that could only restore it by philz, so I flash the philz when I try to connect my phone, gave error, those little letters that appear on top it, and try to turn it usually appeared lg logo and the low, Security error. Using tried FlashTool but this log appears:
Excuse me, google translate,
In my language:
Eu havia instalado a CM 11 m8 no meu celular D805, usava a philz recovery, mas, tive que mudar pra TWRP para instalar a CM, e eu tinha um backup que só conseguia restaura-lo pela philz, então fui flashar a philz, quando fui tentar ligar meu celular, deu erro, aquelas letrinhas que aparecem la encima, e ao tentar liga-lo normalmente, apareceu o logo da lg e a baixo, Security Error. Tentei Usar o FlashTool mas aparece esse log:
Code:
00:00:58 : Restart.....
00:00:58 : Start Date : 2014-07-24 00:00:58
00:00:58 : ---------- QM Testmode ---------
00:00:58 : ***** Check Tool Version *****
00:00:58 : Tool version : 1.6.9.0
00:00:58 : UpgradeDLL version : 2.1.5.0
00:00:58 : Current Dir : C:\ProgramData\LGMOBILEAX\B2C_Client
00:00:58 : LGE USB Driver Version :
00:00:58 : Android PDLV Version :
00:00:58 : Android NDLV Version :
00:00:58 : ******************************************
00:00:58 : [C:\ProgramData\LGMOBILEAX\Phone] Try to delete folder
00:00:58 : SetEmerModeAT()
00:00:58 : _IsConnectedPhone Call
00:01:06 : _IsConnectedPhone(2)
00:01:06 : 0 - NotConnected.
00:01:06 : 1 - Normal connect success
00:01:06 : 2 - Emergency connect success
00:01:06 : *****CheckOS Start********
00:01:06 : Microsoft_Windows7_Professional_
00:01:06 : *****CheckPCSyncPrograms Start*****
00:01:06 : PCSyncPrograms Not Found - OK and ready to upgrade
00:01:06 : Verifying phone connection...
00:01:06 : dwWaitResetTime(40000 ms)
00:01:07 : Phone Mode(2)
00:01:07 : *****GetPhoneType Start*****
00:01:07 : Phone Type : CDMA_2CHIP
00:01:08 : *****GetPhoneBinaryVersion Start*****
00:01:08 : Phone Bin Version : LAM HOANG STOCK 7.2_00
00:01:08 : *****Get ESN / IMEI / MEID Start*****
00:01:08 : ESN/IMEI/MEID : 3583000508725559
00:01:12 : Check Backup and Restore model
00:01:12 : Skip Backup and Restore - Emergency mode
00:01:12 : Phone type Compare start
00:01:12 : *****CheckPCSyncPrograms Start*****
00:01:12 : PCSyncPrograms Not Found - OK and ready to upgrade
00:01:13 : ****************CheckAndDownload********************
00:01:13 : Version :
00:01:13 : ******Extract Start C:\Users\Artur Gustavo\Desktop\G2\D80520A_00.kdz*****
00:01:13 : Model Dll Dir(C:\ProgramData\LGMOBILEAX\Phone\)
00:01:13 : Check 2G-4G big size kdz file..
00:01:13 : Extract 2G-4G big size kdz file..
00:01:13 : NNNNN WDB FullPath(C:\Users\Artur Gustavo\Desktop\G2\D80520A_00.kdz)
00:01:13 : NNNNN Model dll FullPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
00:01:13 : Extract End C:\Users\Artur Gustavo\Desktop\G2\D80520A_00.kdz
00:01:13 : 01 Skip delete kdz 1.1 file...
00:01:13 : ------------------Model.dll Information-------------------
00:01:13 : Filename : LGUP_8974.dll
00:01:13 : Version : 0.3.13.1
00:01:13 : File size : 1526272
00:01:13 : File date : 2014/07/24-00:01:13
00:01:13 : PC Created date: 2014/07/24-00:01:13
00:01:13 : ----------------------------------------------------------
00:01:13 : *****Check LGCM Programs Start*****
00:01:13 : LGCM Programs Not Found - OK and ready to upgrade
00:01:13 : m_pLGCyonUpdate status change.
00:01:13 : *****WorkModelDLL Start*****
00:01:13 : strPhoneBinaryPath(C:\Users\Artur Gustavo\Desktop\G2\D80520A_00.kdz)
00:01:13 : strModuleDir(C:\ProgramData\LGMOBILEAX\Phone\)
00:01:13 : strModelDLLPath(C:\ProgramData\LGMOBILEAX\Phone\LGUP_8974.dll)
00:01:13 : _DetachDLL Call
00:01:18 : _DetachDLL Call End
00:01:18 : Call fn_StartUpgrade
00:01:18 : ********* 2Chip Model.dll input Parameter*************
00:01:18 : MODEL_EVENT : 32769
00:01:18 : PhoneBinaryPath : C:\Users\Artur Gustavo\Desktop\G2\D80520A_00.kdz
00:01:18 : ModuleDir : C:\ProgramData\LGMOBILEAX\Phone\
00:01:18 : BootWaitTime : 49500
00:01:18 : UsbHighSpeed : FALSE
00:01:18 : PhoneMode : 2
00:01:18 : NewPhoneBinVersion : D80520A_00
00:01:18 : ClearSI : FALSE
00:01:18 : AuthMark : 0
00:01:18 : ********* 2Chip Model.dll input Parameter End*************
00:01:21 : wParam : 20, lParam = 540
00:01:21 : MODEL DLL Event : (20, 540)
00:01:21 : Model File Count = 540
00:01:21 : wParam : 100, lParam = 51
00:01:21 : MODEL DLL Event : (100, 51)
00:01:21 : Step : TYPE_WPARAM_UPGRADE_ERROR
00:01:21 : CleanModelDll() : Free Model.dll
00:01:21 : _DetachDLL Call
00:01:26 : _DetachDLL Call End
00:01:26 : Page_Error ºÎºÐÀÔ´Ï´Ù
00:01:26 : ¿©±â´Â Retry ºÎºÐÀÔ´Ï´Ù
Guys, managed to solve, was attempting a rom without link with the operator in Brazil, was waging in 49%, but then downloaded a rom with bond Vivo carrier and uninstalled and reinstalled the drivers, after that it worked. Using lg flash tool offline.
Galera, consegui resolver, estava tentando uma rom sem vinculo com operadora no Brasil, estava travando nos 49%, mas ai baixei uma rom com vinculo a operadora Vivo e desinstalei e reinstalei os drivers, depois disso deu certo. Usando o lg flash tool offline.
arturgpj said:
Resolved
Click to expand...
Click to collapse
Hello, It's the wrong way of closing a thread, could you please write:
"solved by...." and your description how you've solved it in case some of other members need it.
I start porting SailfishOS to Tiny210v2 S5PV210 ARM Cortex-A8 Board
And i have error when SurfaceFlinger is start:
Code:
I/SurfaceFlinger( 212): SurfaceFlinger is starting
I/SurfaceFlinger( 212): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 212): loaded /vendor/lib/egl/libEGL_POWERVR_SGX540_120.so
D/libEGL ( 212): loaded /vendor/lib/egl/libGLESv1_CM_POWERVR_SGX540_120.so
D/libEGL ( 212): loaded /vendor/lib/egl/libGLESv2_POWERVR_SGX540_120.so
W/libEGL ( 212): eglInitialize(0x1) failed (EGL_BAD_ALLOC)
I/hwcomposer( 212): int hwc_device_open(const hw_module_t*, const char*, hw_device_t**)::win-0 add[0] 3c330000
I/hwcomposer( 212): int hwc_device_open(const hw_module_t*, const char*, hw_device_t**)::win-0 add[1] 3c4a7000
I/hwcomposer( 212): int hwc_device_open(const hw_module_t*, const char*, hw_device_t**)::win-0 add[2] 3c61e000
E/hwcomposer( 212): int createFimc(s5p_fimc_t*)::Post processor open error (13)
E/hwcomposer( 212): int hwc_device_open(const hw_module_t*, const char*, hw_device_t**)::creatFimc() fail
E/SurfaceFlinger( 212): composer device failed to initialize (Invalid argument)
E/SurfaceFlinger( 212): ERROR: failed to open framebuffer (Not a typewriter), aborting
F/libc ( 212): Fatal signal 6 (SIGABRT) at 0x000000d4 (code=-6), thread 212 (surfaceflinger)
who can ask me - what is wrong ?
new error
Code:
I/SurfaceFlinger( 73): SurfaceFlinger is starting
I/SurfaceFlinger( 73): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 73): loaded /vendor/lib/egl/libEGL_POWERVR_SGX540_120.so
D/libEGL ( 73): loaded /vendor/lib/egl/libGLESv1_CM_POWERVR_SGX540_120.so
D/libEGL ( 73): loaded /vendor/lib/egl/libGLESv2_POWERVR_SGX540_120.so
I/auditd ( 165): Starting up
E/auditd ( 165): Failed on audit_set_pid with error: Protocol not supported
I/auditd ( 165): Exiting
E/keystore( 166): chdir: /data/misc/keystore: No such file or directory
I/hwcomposer( 73): int hwc_device_open(const hw_module_t*, const char*, hw_device_t**)::win-0 add[0] 3c330000
I/hwcomposer( 73): int hwc_device_open(const hw_module_t*, const char*, hw_device_t**)::win-0 add[1] 3c4a7000
I/hwcomposer( 73): int hwc_device_open(const hw_module_t*, const char*, hw_device_t**)::win-0 add[2] 3c61e000
E/hwcomposer( 73): int createFimc(s5p_fimc_t*)::Post processor open error (13)
E/hwcomposer( 73): int hwc_device_open(const hw_module_t*, const char*, hw_device_t**)::creatFimc() fail
E/SurfaceFlinger( 73): composer device failed to initialize (Invalid argument)
I/SurfaceFlinger( 73): Using composer version 1.0
W/SurfaceFlinger( 73): getting VSYNC period from fb HAL: 14705882
W/SurfaceFlinger( 73): no suitable EGLConfig found, trying a simpler query
I/SurfaceFlinger( 73): EGL informations:
I/SurfaceFlinger( 73): vendor : Android
I/SurfaceFlinger( 73): version : 1.4 Android META-EGL
I/SurfaceFlinger( 73): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_ANDROID_image_native_buffer EGL_ANDROID_recordable
I/SurfaceFlinger( 73): Client API: OpenGL_ES
I/SurfaceFlinger( 73): EGLSurface: 8-8-8-8, config=0x2
I/SurfaceFlinger( 73): OpenGL ES informations:
I/SurfaceFlinger( 73): vendor : Imagination Technologies
I/SurfaceFlinger( 73): renderer : PowerVR SGX 540
I/SurfaceFlinger( 73): version : OpenGL ES-CM 1.1
I/SurfaceFlinger( 73): extensions: GL_EXT_debug_marker GL_OES_byte_coordinates GL_OES_fixed_point GL_OES_single_precision GL_OES_matrix_get GL_OES_read_format GL_OES_compressed_paletted_texture GL_OES_point_sprite GL_OES_point_size_array GL_OES_matrix_palette GL_OES_draw_texture GL_OES_query_matrix GL_OES_texture_env_crossbar GL_OES_texture_mirrored_repeat GL_OES_texture_cube_map GL_OES_blend_subtract GL_OES_blend_func_separate GL_OES_blend_equation_separate GL_OES_stencil_wrap GL_OES_extended_matrix_palette GL_OES_framebuffer_object GL_OES_rgb8_rgba8 GL_OES_depth24 GL_OES_stencil8 GL_OES_compressed_ETC1_RGB8_texture GL_OES_mapbuffer GL_OES_EGL_image GL_OES_EGL_image_external GL_EXT_multi_draw_arrays GL_OES_required_internalformat GL_IMG_read_format GL_IMG_texture_compression_pvrtc GL_IMG_texture_format_BGRA8888 GL_EXT_texture_format_BGRA8888 GL_OES_egl_sync GL_IMG_vertex_array_object
I/SurfaceFlinger( 73): GL_MAX_TEXTURE_SIZE = 2048
I/SurfaceFlinger( 73): GL_MAX_VIEWPORT_DIMS = 2048
E/cutils-trace( 73): Error opening trace file: No such file or directory (2)
E/libEGL ( 73): eglQuerySurface:599 error 300d (EGL_BAD_SURFACE)
E/libEGL ( 73): eglQuerySurface:599 error 300d (EGL_BAD_SURFACE)
E/libEGL ( 73): call to OpenGL ES API with no current context (logged once per thread)
D/SurfaceFlinger( 73): Screen acquired, type=0 flinger=0x41e85450
E/SurfaceFlinger( 73): eventControl(0, 1) failed Bad file number
D/libEGL ( 189): loaded /vendor/lib/egl/libEGL_POWERVR_SGX540_120.so
D/libEGL ( 189): loaded /vendor/lib/egl/libGLESv1_CM_POWERVR_SGX540_120.so
D/libEGL ( 189): loaded /vendor/lib/egl/libGLESv2_POWERVR_SGX540_120.so
E/cutils-trace( 189): Error opening trace file: No such file or directory (2)
E/libEGL ( 189): eglQuerySurface:599 error 300d (EGL_BAD_SURFACE)
E/libEGL ( 189): eglQuerySurface:599 error 300d (EGL_BAD_SURFACE)
E/libEGL ( 189): eglMakeCurrent:784 error 3009 (EGL_BAD_MATCH)
DELETED
but there is some aosp build usable ( incall micro working on fine ) for galaxy s 6?
thanks for the guide Master
supera3 said:
but there is some aosp build usable ( incall micro working on fine ) for galaxy s 6?
thanks for the guide Master
Click to expand...
Click to collapse
Depend on what source zero-common, zerofltexx and kernel are based.
Very cool guide, I'll have to give this a shot later just for fun! Sorry for doubting you before.
If there are new commits, before ". build/envsetup.sh" tipe "repo sync" for upgrade.
Hi @Astrubale,
I tried to build cm-13.0 with your tutorial, but build fails non-stop on:
Code:
target SharedLib: libexpat (/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so)
/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/lib/xmlparse.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
build/core/shared_library_internal.mk:80: recipe for target '/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so' failed
make: *** [/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so] Error 1
make: *** Waiting for unfinished jobs....
make[3]: Nothing to be done for 'dtbs'.
or
Code:
/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/android_compat_hacks.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
build/core/shared_library_internal.mk:80: recipe for target '/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/LINKED/libcrypto.so' failed
make: *** [/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/LINKED/libcrypto.so] Error 1
make: *** Waiting for unfinished jobs....
make: Leaving directory '/home/sebek/android/system'
The solution is to remove xmlparse.o or android_compat_hacks.o and I guess it continues the build. Almost at the end of compilation (I presume) it throws out that very error and after a while I get:
Code:
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '/lib/firmware/abov/abov_valley.fw' given more than once in the same rule
make[1]: Leaving directory '/home/sebek/android/system/kernel/samsung/exynos7420'
make[1]: Entering directory '/home/sebek/android/system/kernel/samsung/exynos7420'
INSTALL net/ipv4/tcp_htcp.ko
INSTALL net/ipv4/tcp_westwood.ko
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '../../system/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '../../system/lib/firmware/abov/abov_valley.fw' given more than once in the same rule
DEPMOD 3.10.61
make[1]: Leaving directory '/home/sebek/android/system/kernel/samsung/exynos7420'
make: Leaving directory '/home/sebek/android/system'
#### make failed to build some targets (26:29 (mm:ss)) ####
Maybe you'd be willing to give me some advice on how I could finish this build ? I am building on Ubuntu 16.04, dl'd the newest kernel from Brandon's git repo.
My best
djseban2 said:
Hi @Astrubale,
I tried to build cm-13.0 with your tutorial, but build fails non-stop on:
Code:
target SharedLib: libexpat (/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so)
/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/lib/xmlparse.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
build/core/shared_library_internal.mk:80: recipe for target '/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so' failed
make: *** [/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libexpat_intermediates/LINKED/libexpat.so] Error 1
make: *** Waiting for unfinished jobs....
make[3]: Nothing to be done for 'dtbs'.
or
Code:
/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/android_compat_hacks.o: file not recognized: File format not recognized
collect2: error: ld returned 1 exit status
build/core/shared_library_internal.mk:80: recipe for target '/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/LINKED/libcrypto.so' failed
make: *** [/home/sebek/android/system/out/target/product/zerofltexx/obj/SHARED_LIBRARIES/libcrypto_intermediates/LINKED/libcrypto.so] Error 1
make: *** Waiting for unfinished jobs....
make: Leaving directory '/home/sebek/android/system'
The solution is to remove xmlparse.o or android_compat_hacks.o and I guess it continues the build. Almost at the end of compilation (I presume) it throws out that very error and after a while I get:
Code:
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '/lib/firmware/abov/abov_valley.fw' given more than once in the same rule
make[1]: Leaving directory '/home/sebek/android/system/kernel/samsung/exynos7420'
make[1]: Entering directory '/home/sebek/android/system/kernel/samsung/exynos7420'
INSTALL net/ipv4/tcp_htcp.ko
INSTALL net/ipv4/tcp_westwood.ko
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '../../system/lib/firmware/tsp_stm/stm_z1.fw' given more than once in the same rule
/home/sebek/android/system/kernel/samsung/exynos7420/scripts/Makefile.fwinst:45: target '../../system/lib/firmware/abov/abov_valley.fw' given more than once in the same rule
DEPMOD 3.10.61
make[1]: Leaving directory '/home/sebek/android/system/kernel/samsung/exynos7420'
make: Leaving directory '/home/sebek/android/system'
#### make failed to build some targets (26:29 (mm:ss)) ####
Maybe you'd be willing to give me some advice on how I could finish this build ? I am building on Ubuntu 16.04, dl'd the newest kernel from Brandon's git repo.
My best
Click to expand...
Click to collapse
Can you send me a screen of /android/system/kernel/samsung/exynos7420/ ?
Astrubale said:
Can you send me a screen of /android/system/kernel/samsung/exynos7420/ ?
Click to expand...
Click to collapse
Sure, it looks like this:
hxxp://imgur.com/M5sAjIo
@edit: I deleted exynos7420 dir and unzipped it (dl'd zip from github) once again, this time through Terminal. Turned out it was something wrong with that, therefore I succeded with building the ROM, but my S6 hangs on "Kernel is not seandroid enforcing", after flashing the ROM (tough luck, I guess). What's more I tried flahyboy's ROM, to see if it's maybe something wrong with my S6 - well, you can say flahyboy's ROM starts instantly, but in-call mic is not working. I'd be grateful for any hints on what might be wrong. One and only thing I noticed is flahyboy's ROM is slightly greater in size (~40MB) that mine.. maybe the build solution did not add something to my zip.. Anyway - great tutorial, thanks for that. Installing AOSP just made me even more anxious to wait for making this system stable :good:
djseban2 said:
Sure, it looks like this:
hxxp://imgur.com/M5sAjIo
@edit: I deleted exynos7420 dir and unzipped it (dl'd zip from github) once again, this time through Terminal. Turned out it was something wrong with that, therefore I succeded with building the ROM, but my S6 hangs on "Kernel is not seandroid enforcing", after flashing the ROM (tough luck, I guess). What's more I tried flahyboy's ROM, to see if it's maybe something wrong with my S6 - well, you can say flahyboy's ROM starts instantly, but in-call mic is not working. I'd be grateful for any hints on what might be wrong. One and only thing I noticed is flahyboy's ROM is slightly greater in size (~40MB) that mine.. maybe the build solution did not add something to my zip.. Anyway - great tutorial, thanks for that. Installing AOSP just made me even more anxious to wait for making this system stable :good:
Click to expand...
Click to collapse
Thank, but can you compile now?
Astrubale said:
Thank, but can you compile now?
Click to expand...
Click to collapse
Yeah, I compiled it at last, but if i flash the zip from out folder, then the phone hangs on first bootsplash ("Galaxy S6") with "Kernel is not seandroid enforcing"
djseban2 said:
Yeah, I compiled it at last, but if i flash the zip from out folder, then the phone hangs on first bootsplash ("Galaxy S6") with "Kernel is not seandroid enforcing"
Click to expand...
Click to collapse
Search for errors inside /proc/last_kmsg
Wow cool clean and easy Guide. Thanks for this.
Weil try myself on that.
Astrubale said:
Search for errors inside /proc/last_kmsg
Click to expand...
Click to collapse
Code:
Samsung S-Boot 4.0 for SM-G920F (Apr 22 2016 - 16:59:51)
EXYNOS7420 EVT 1.3 (Base on ARM CortexA53)
3048MB / 0MB / Rev 11 / G920FXXU3DPDP / (PKG_ID 0x0) / LOT_ID N3N1P / RST_STAT (0x10000)
__if_pmic_rev_init - MUIC API is not ready!
MON: 0x8(1)
MON[0] = (1)[0x1c, 0x7a]
MON[1] = (2)[0x1a, 0x56]
MON[2] = (3)[0x1a, 0x3d]
MON[3] = (4)[0x1c, 0x4e]
MON[4] = (5)[0x1a, 0x39]
MON[5] = (6)[0x1a, 0x30]
MON[6] = (7)[0x15, 0x44]
MON[7] = (0)[0x0c, 0x07]
pmic_asv_init
(ASV_TBL_BASE+0x00)[11:0] bigcpu_asv_group = 2184
(ASV_TBL_BASE+0x00)[15:12] bigcpu_ssa0 = 0
(ASV_TBL_BASE+0x00)[27:16] littlecpu_asv_group = 2457
(ASV_TBL_BASE+0x00)[31:28] littlecpu_ssa0 = 0
(ASV_TBL_BASE+0x04)[11:0] g3d_asv_group = 2184
(ASV_TBL_BASE+0x04)[15:12] g3d_ssa0 = 0
(ASV_TBL_BASE+0x04)[27:16] mif_asv_group = 2184
(ASV_TBL_BASE+0x04)[31:28] mif_ssa0 = 0
(ASV_TBL_BASE+0x08)[11:0] int_asv_group = 3276
(ASV_TBL_BASE+0x08)[15:12] int_ssa0 = 6
(ASV_TBL_BASE+0x08)[27:16] cam_disp_asv_group = 2184
(ASV_TBL_BASE+0x08)[31:28] cam_disp_ssa0 = 0
(ASV_TBL_BASE+0x0C)[3:0] dvfs_asv_table_version = 15
(ASV_TBL_BASE+0x0C)[4] asv_group_type = 0
(ASV_TBL_BASE+0x0C)[7:5] reserved01 = 0
(ASV_TBL_BASE+0x0C)[8] shift_type = 0
(ASV_TBL_BASE+0x0C)[9] ssa1_enable = 0
(ASV_TBL_BASE+0x0C)[10] ssa0_enable = 1
(ASV_TBL_BASE+0x0C)[15:11] reserved02 = 0
(ASV_TBL_BASE+0x0C)[16] asv_method = 1
(ASV_TBL_BASE+0x0C)[31:17] reserved03 = 0
(ASV_TBL_BASE+0x10)[3:0] main_asv_group = 0
(ASV_TBL_BASE+0x10)[7:4] main_asv_ssa = 0
(ASV_TBL_BASE+0x10)[11:8] bigcpu_ssa1 = 0
(ASV_TBL_BASE+0x10)[15:12] littlecpu_ssa1 = 0
(ASV_TBL_BASE+0x10)[19:16] g3d_ssa1 = 0
(ASV_TBL_BASE+0x10)[23:20] mif_ssa1 = 0
(ASV_TBL_BASE+0x10)[27:24] int_ssa1 = 0
(ASV_TBL_BASE+0x10)[31:28] cam_disp_ssa1 = 0
(ASV_TBL_BASE+0x14)[8:0] bigcpu_ssa_ema = 0
(ASV_TBL_BASE+0x14)[17:9] littlecpu_ssa_ema = 0
(ASV_TBL_BASE+0x14)[26:18] g3d_ssa_ema = 0
(ASV_TBL_BASE+0x14)[31:27] reserved04 = 0
chip_status = f, bin2_efuse = 0
muic_register_max77843_apis
muic_is_max77843 chip_id:0x43 muic_id:0xb5 -> matched.
MUIC rev = MAX77843(181)
init_multi_microusb_ic Active MUIC 0xb5
max77843_init_microusb_ic: MUIC: CDETCTRL:0x2d
max77843_init_microusb_ic: MUIC: CONTROL1:0x00
max77843_init_microusb_ic: MUIC: CONTROL2:0x3b
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
load Secure Payload done.
Chip ID : 060f4d16dd28 / 0x00007700
EL3 monitor information => Built : 16:48:28, Jan 18 2016
bConfigDescrLock: 1
sw_lock success
sw_lock success
sw_lock success
SCSI CMD : 55 11 00 00 00 00 00 00 14 00
SCSI Response(01) : Target Failure
SCSI Status(02) : max77843_set_muic_uart_early: MUIC: CONTROL1: 0x00
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
[Debug Info.]
S-BOOT : VERSION_-+F0
SecureOS : 20 (MB)
- read_bl1
blk_bread_bootsector: LUN 1, from 0x0, size 0x10, buffer 0x45708000
Verify_Binary_Signature 0x45720120 [email protected], [email protected]
pit_check_signature (PIT) valid.
PARAM ENV VERSION: v1.0..
blk_bread_bootsector: LUN 1, from 0xffe, size 0x1, buffer 0x441204c0
initialize_ddi_data: usable! (3:0xf), warranty reason : (0x0303)
MAGIC_RAM_BASE: 4000000, MAGIC_RAM_BASE2: 100001, ompin: 2000a
[ldfw] Pass LDFW partition!
[ldfw] read whole CM partition from the storage
ldfw: 0th ldfw's version 0x20151027 name : CryptoManagerV20
ldfw: 1th ldfw's version 0x20151203 name : fmp_fw
ldfw: init ldfw(s). whole ldfws size 0x204110
[ldfw] try to init 2 ldfw(s). except 0 ldfw 2 ldfw(s) have been inited done.
[mobi_drv] add: 0x43e71940, size: 11401
MobiCore IDLE flag = 0
MobiCore Driver loaded and RTM IDLE!
[OTP] 27 bit read: 0x5
[OTP] 22 bit read: 0x0
[OTP] 21 bit read: 0x0
[OTP] 23 bit read: 0x1
[OTP] 26 bit read: 0x1
[OTP] NANTIRBK0 bit reading: start
[OTP] NANTIRBK0: 3 bit
[OTP] 28 bit read: 0x1
[OTP] 29 bit read: 0x0
[OTP] 30 bit read: 0x1
[OTP] 25 bit read: 0x1
[OTP] ETC value: 0
[EFUSE] SMC Read the 0x0 ...
[EFUSE] SMC Read Count value: 3
[EFUSE] SMC Read the 0x1 ...
[EFUSE] SMC Read Count value: 1
[EFUSE] SMC Read the 0x2 ...
[EFUSE] SMC Read Count value: 0
[EFUSE] SMC Read the 0x3 ...
[EFUSE] SMC Read Count value: 1
(1,5) vs (1,5)
[EFUSE] This is commercial device.
set_tzpc_secureport: successfully protected 0
eSE Protection!!
Authenticated data read request (Swapped)
Authenticated data read response (Swapped)
RPMB: get hmac value: success
HMAC compare success !!
update_rpmb_version skip.
initialize_secdata_rpmb: usable! (0x52504d42)
DDR SIZE: 3G (0xc0000000)
LPDDR4 manufacturer : Micron
bin2_efuse = 0
[TMU] 52, 53, 51, 51
UFS vendor: SAMSUNG
FW rev : 0200
product : KLUBG4G1BD-E0B1
UFS size (GB) : 32
UFS ID : XXXXXXXXXXXXXXXX
lun:196 Query Response : 0xfc
lun:196 Query Response : 0xfc
lun:196 Query Response : 0xfc
lun:196 Query Response : 0xfc
dNumAllocUnits error at LU7 0 0
PROVISION : FAIL
PROVISION : FAIL
max77843_muic_api_print_init_regs: INTMASK[1:0x00, 2:0x00, 3:0x00]
max77843_muic_api_print_init_regs: MUIC: CDETCTRL:0x2d
max77843_muic_api_print_init_regs: MUIC: CONTROL1:0x00
max77843_muic_api_print_init_regs: MUIC: CONTROL2:0x3b
max77843_muic_api_print_init_regs: MUIC: CONTROL3:0x00
max77843_muic_api_print_init_regs: MUIC: CONTROL4[0x16]:0xb2
init_ific : MAX77843(0)
init_ific : MAX77843(0)
set_float_voltage: max77843 battery cv voltage 0x9c
set_charger_state: buck(1), chg(1), reg(0x05)
max77843_get_charger_status: Invalid charger
set_auto_current: get_charger_status(0)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
set_auto_current: unknown_state, curr(475)
max77843_get_charger_status: Invalid charger
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
set_charger_current: chg curr(137), in curr(0)
max77843_get_charger_status: Invalid charger
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
fuelguage : wpc_status(0)
set_charger_state: buck(1), chg(0), reg(0x04)
init_fuel_gauge: Start!!
init_fuel_gauge : MAX77843(0)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
adc_read_temp temp_adc = 1852
init_fuel_gauge temp = 25
init_fuel_gauge : MAX77843(0)
init_fuel_gauge: Battery type : SDI, capacity: 5177, status: 128
init_fuel_gauge: Already initialized (0x1439, SDI type)
check_validation_with_tablesoc: Start!!
fuel_gauge_read_soc: SOC(32), data(0x209a)
fuel_gauge_read_ocv: VFOCV(3774), data(0xbcba)
calculate_table_soc : low(0) high(6) mid(7) table_soc(0)
calculate_table_soc : low(4) high(6) mid(3) table_soc(0)
calculate_table_soc : low(6) high(6) mid(5) table_soc(0)
calculate_table_soc : low(7) high(6) mid(6) table_soc(0)
calculate_table_soc: vcell [3774] table_soc [31]
differ(1), table_soc(31), RepSOC(32)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_muic_get_chg_typ: STATUS2:0x00
max77843_muic_get_chg_typ: CHGTYP:0x00
fuel_gauge_read_vcell: VCELL(3716), data(0xb9d8)
vcell(3716),soc_diff_limit(50), low_temp_reset(0)
fuel_gauge_read_ocv: VFOCV(3774), data(0xbcba)
fuel_gauge_read_vcell: VCELL(3716), data(0xb9d8)
fuel_gauge_read_soc: SOC(32), data(0x209a)
fuel_gauge_read_vfsoc: VFSOC(30), data(0x1ef3)
init_fuel_gauge : OCV(3774), VCELL(3716), SOC(32), VFSOC(30)
AP_PMIC_SDA = 1
PMIC_ID = 0x12
OTP:0x78 PWR_SEQ:1 G3D_OCP:1 PSoff:1 INT_Volt:1
PMIC_STATUS1 = 0x2f PWRON JIGONB ACOKB MR2B PWRON1S
PMIC_STATUS2 = 0x11 RTC60SE RTC1SE
PMIC_PWRONSRC = 0x08 MRST
PMIC_OFFSRC = 0x00
PMIC_INT1 = 0xc3 PWRONF PWRONR PWRON1S MRB
PMIC_INT2 = 0x11 RTC60S RTC1S
PMIC_INT3 = 0x80 RSVD
PMIC_RTC_CTRL = 0x02
PMIC_RTC_SMPL = 0x83
RTC TIME: 2016-08-13 07:27:29(0x40)AM
s5p_check_keypad: 0x10110000
s5p_check_keypad: recovery mode
set_oneshot_recovery: recovery mode set! sys_bootm=0x80000
s5p_check_reboot_mode: INFORM3 = 0 ... skip
ATLAS_PLL = 1200MHz APOLLO_PLL = 1200MHz MIF_PLL = 3104MHz
MFC_PLL = 468MHz CCI_PLL = 532MHz
BUS0_PLL = 1600MHz BUS1_PLL = 668MHz
board_uart_rustproof ifc_sense: 0
-user build & not FAC
-rustproof mode Enabled
s5p_check_upload: MAGIC(0x4000000), RST_STAT(0x10000)
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
s5p_check_upload: debug level is LO! (mask: 0x220)
max77843_ific_set_mrstb: TOPSYS: MAINCTRL1[0x02]: [0x07]+[0x07]->[0x07]
s5p_check_upload: disable dump_gpr
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
s5p_check_download: 0
max77843_muic_get_adc_value: STATUS1:0x1f
max77843_muic_get_adc_value: ADC:0x1f
max77843_get_charger_status: Invalid charger
get_wireless_charger_detect: wireless check 0
get_wireless_charger_detect : CHG_DTLS(0x00)
check_pm_status: charger is not detected
fuel_gauge_read_vcell: VCELL(3718), data(0xb9ea)
check_pm_status: voltage(3718) is ok
check_pm_status: 7 sec reset, continue.
scr_draw_image: draw 'logo.jpg'...
read 'logo.jpg'(112504) completed.
board_set_dev_pm: s2mpb02 enable for display
42, 0, 13, 0x420013
DETECTED LCD TYPE : S6E3HA2
mipi-dsi driver(CMD mode) has been probed.
decon-int: ver0, max win7, command mode, hw trigger
single dsi mode
decon0 registered successfully
afw flag is Unknown [afw flag : 00 00 00 00]
secure info base: 45720000 and SMC Num = 0x83000013
secure smc success!!! [ret = 0]
Set debug level to low(4f4c)
DMV: Successfully informed TZ of boot mode: Recovery
load_kernel: loading boot image from 139264..
kernel size = 0x114f000, ramdisk size = 0x5fc000
dt_size:1454080, dt_actual:1454080
Verify_Binary_Signature 0x45720120 [email protected], [email protected]
Kernel Image
Verify_Binary_Signature: failed.(-18022398)
pit_check_signature (RECOVERY) invalid.
[TIMA trusted boot]: SEANDROID ENFORCING
Set invalid sign flag
No need to update kernel type.
[EFUSE] warranty bit is already set.
ace_hash_sha_digest: passed.(0)
tboot ctx base: 45720248
SMC Num = 0x83000001
mobismc success!!! [ret = 0]
SMC Num = 0x83000007
mobismc for tima info success!!! [ret = 0]
Pass. DTBH size is smaller than a page.
<dtbh_header Info>
magic:0x48425444, version:0x00000002, num_entries:0x00000008
<device info>
chip_id: 0x00001cfc
platform_id: 0x000050a6
subtype_id: 0x217584da
hw_rev: 0x0000000b
dt_entry[06]
chip_id: 0x00001cfc
platform_id: 0x000050a6
subtype_id: 0x217584da
hw_rev: 0x0000000a
hw_rev_end: 0x0000000b
offset: 0x0010a000
dtb size: 0x0002c800
Selected entry hw_ver : 11
dt_entry of hw_rev 10 is loaded at 0x4a000000.(182272 Bytes)
[EFUSE] RB count: device(0x3), binary(0x3)
[OTP] SW LOCK Success
DDI value :0x0000000f
sw_lock success
sw_lock success
Forced Enable KAP
Warranty Bit Set - Blowing KAP_VIOLATION_FUSE
KAP status = 5afe0003
ATAG_CORE: 5 54410001 0 0 0
ATAG_MEM: 4 54410002 20000000 40000000
ATAG_MEM: 4 54410002 20000000 60000000
ATAG_MEM: 4 54410002 20000000 80000000
ATAG_MEM: 4 54410002 20000000 A0000000
ATAG_MEM: 4 54410002 20000000 C0000000
ATAG_MEM: 4 54410002 1E800000 E0000000
ATAG_SERIAL: 4 54410006 XXXXXXXX XXXXXXXX
ATAG_INITRD2: 4 54420005 43000000 5fbd8f
ATAG_REVISION: 3 54410007 b
check_rustproof [0,0] On
ucs flag is Unknown
ucs flag : 00 00 00 00
ATAG_CMDLINE: f0 54410009 'console=ram loglevel=4 bootmode=2 sec_debug.level=0 sec_watchdog.sec_pet=5 androidboot.hardware=samsungexynos7420 androidboot.debug_level=0x4f4c ess_setup=0x46000000 [email protected] [email protected] charging_mode=0x3000 s3cfb.bootloaderfb=0xe2a00000 sysscope=0x6b090719 lcdtype=4325395 consoleblank=0 lpj=239616 sec_debug.reset_reason=5 ehci_hcd.park=3 oops=panic pmic_info=35 cordon=c34c0eba5576148dc662cf43a6352c3b connie=SM-G920F_OPEN_EUR_c3811d70601ea690b7b0b2afca80be2c fg_reset=0 androidboot.emmc_checksum=3 androidboot.boot_salescode= androidboot.odin_download=1 androidboot.bootloader=G920FXXU3DPDP androidboot.selinux=enforcing androidboot.security_mode=1526595585 androidboot.ucs_mode=0 androidboot.hw_rev=11 androidboot.warranty_bit=1 androidboot.hmac_mismatch=0 androidboot.sec_atd.tty=/dev/ttySAC1 androidboot.serialno=XXXXXXXXXXXXXXXX snd_soc_core.pmdown_time=1000 zero_sdchg_ic=0 androidboot.fmp_config=0'
ATAG_NONE: 0 0
pack_atags: ramdisk size start 0x43000000, size 0x5fbd8f
Updating device tree @0x4a000000: done
Starting kernel at 0x40205000...
SWITCH_SEL(3)
BOOTING TIME : 2895
Here it is, mate. I can't seem to find anything suspicious besides
Code:
dNumAllocUnits error at LU7 0 0
PROVISION : FAIL
PROVISION : FAIL
but I can only guess
Hi I am having problems compiling due to the kernel. Which kernel source should I use? How should I configure it? Help pleaase
Added "extract files" guide.
Whenever I try to download the CyanogenMod repo, I get this error:
error: Exited sync due to fetch errors
I've tried using: repo sync -f and: repo sync --force-sync
I'm trying to download the CM13 repo.
I've also followed the steps exactly as they were written.
I'm trying to build cm-14.0. Fails at
HTML:
Starting build with ninja
ninja: Entering directory `.'
ninja: error: '/home/julian/android/system/out/target/product/zerofltexx/obj_arm/SHARED_LIBRARIES/libsecril-client_intermediates/export_includes', needed by '/home/julian/android/system/out/target/product/zerofltexx/obj_arm/SHARED_LIBRARIES/audio.primary.universal7420_intermediates/import_includes', missing and no known rule to make it
build/core/ninja.mk:151: recipe for target 'ninja_wrapper' failed
make: *** [ninja_wrapper] Error 1
make: Leaving directory '/home/julian/android/system'
.
Any ideas what could be wrong?
/android/system/kernel/samsung/exynos7420 contains github.com/CyanogenMod/android_kernel_samsung_exynos7420 cm-14.0.
Thanks for the great guide anyway