Related
I rooted my hero and tried out a few roms but non seem to polished yet so was wanting to finda stock rom while keeping root of course, Id mainly like the stock one with the ability to run apps from sd card.
have you tried fresh 1.0 its pretty close to stock. If you want you can just return to your nandroid that you did after you rooted but before u installed any ROMs and thats basically a rooted Stock ROM
yeah im gonna try that because now I cant do anything, I hope I didnt mess up my phone, no matter the update I apply(and I try wiping to) it just sits at the htc screen.
How do you apply the nandroid backup?
I just basically have the folder with everything in it on desktop
boot into recovery mode and go down to the listing that says Nandroid Restore.
also when you install a new ROM it isnt rare for it to take up to 10 minutes to boot.
yeah i mean id wait 30-even 45 mins, it just sits at the htc screen, and sometimes the lock screen will even appear, i jsut kept getting errors for force close
and id get to a permission screen, itd say like overclock at the top and ask for permission?
any idea what that is and what todo?
Nandroid Restore. I assume you did make a nandroid right after you successfully rooted correct?
yeah its doing the nand. restore now. hopefully all is well. just waiting for it to finish restore.
ive never had a problem rooting, my g1 always worked fine.
ah phew, thankfully I had a backup. and i was thinking, is their honestly any reason to go to a rom atm? I mean for my g1 I used one because it was faster, quicker, more features, and had apps2sd.
but atm for hero atm doesnt look like a top notch one yet?
also can the stock rom with root do apps2sd?
and easiest way?
firstboot scripts can keep your phone at the htc boot animation for 5-10 minutes. I don't know if you waited that long or not but generally I have seen that first boot with a custom rom take a little while to get things setup right.
samrozzi said:
yeah i mean id wait 30-even 45 mins, it just sits at the htc screen, and sometimes the lock screen will even appear, i jsut kept getting errors for force close
and id get to a permission screen, itd say like overclock at the top and ask for permission?
any idea what that is and what todo?
Click to expand...
Click to collapse
obelisk79 said:
firstboot scripts can keep your phone at the htc boot animation for 5-10 minutes. I don't know if you waited that long or not but generally I have seen that first boot with a custom rom take a little while to get things setup right.
Click to expand...
Click to collapse
He already stated he waited way more than 10 mins....
Fresh 1.0 makes your phone quicker, I wasn't going to ROM until a really customized and polished one came along but after trying Fresh, I'd highly recommend it.
Not sure what they did on this thing. I thought 2.1 was supposed to IMPROVE performance...and add some BT functionality.
I got no BT improvement. Instead, I got:
1. Random reboots
2. Slow/crashing Navigation
3. Useless voice recognition on Navigation
4. Random phone calls placed when fiddling with BT
5. Slow opening notifications
6. WIFI won't turn on
I could go on and on...
Sprint says I can't go back to 1.5, but I'm sure there's a way to do it.
HELP PLEASE! I'm rooted, if that helps.
Greg
theres noway. your H-Boot has been updated. thats the end of it. 1.5 just wont work anymore.
Sent from my Hero CDMA using the XDA mobile application powered by Tapatalk
troublestylist said:
HELP PLEASE! I'm rooted, if that helps.
Click to expand...
Click to collapse
Yes it does. Just find a 1.5 ROM for CDMA hero. However, before most of our devs moved on to the EVO almost all of them stop developing 1.5 and moved to 2.1
I would suggest trying out some 2.1 ROMs and see what you like.
If you are rooted you should have put a recovery on your phone that you can get to by pressing home and turning on your phone. The first thing you will want to do is make a nandroid backup in case you don't like things. Then stick a ROM on your sdcard. Select all the wipe options except for battery and rotate and then flash a new ROM.
Id try wiping and reloading a 2.1 rom. I never had any of those problems when I went to 2.1.
I'm running the latest DamageControl and can honestly say I am not having any of those issues. I say you should try using a different ROM.
centran said:
Yes it does. Just find a 1.5 ROM for CDMA hero. However, before most of our devs moved on to the EVO almost all of them stop developing 1.5 and moved to 2.1
I would suggest trying out some 2.1 ROMs and see what you like.
If you are rooted you should have put a recovery on your phone that you can get to by pressing home and turning on your phone. The first thing you will want to do is make a nandroid backup in case you don't like things. Then stick a ROM on your sdcard. Select all the wipe options except for battery and rotate and then flash a new ROM.
Click to expand...
Click to collapse
I didn't root until I got 2.1, so I surmise the 1.5 is gone, right?
derekwilkinson said:
I'm running the latest DamageControl and can honestly say I am not having any of those issues. I say you should try using a different ROM.
Click to expand...
Click to collapse
RegawMOD was also recommended. Any reason why to pick one or the other?
Thanks for all the help. Sad that unpaid and unsupported independent developers can do this job better than HTC.
In a best case world, I'd be able to get ad hoc networking to work. I followed the directions but didn't have any success. My ultimate goal was to enable my Hero to display photos wirelessly from my computer. Many programs do it the other way around.
Originally I thought BT would be the easiest wireless protocol, but it seems pretty weak for that sort of data transfer. So 802.11 seemed a better solution...but for some reason Android folks decided to cripple the OS from recognizing ad hoc networks. Odd.
troublestylist said:
I didn't root until I got 2.1, so I surmise the 1.5 is gone, right?
Click to expand...
Click to collapse
You can still flash 1.5 ROMs. You just can't flash the 1.5 RUU.
Great...
Tried Damagecontrol 2.09, did a clean wiped install, and everything seemed fine. Didn't seem much faster, but whatever.
Too bad I waited until I was at work to reboot. Now it's in a bootloop, and I'm stuck at work with no phone.
Sprint sent me a new phone. Once I confirm it's got 1.5, they can have this 2.1-infected POS back.
troublestylist said:
Tried Damagecontrol 2.09, did a clean wiped install, and everything seemed fine. Didn't seem much faster, but whatever.
Too bad I waited until I was at work to reboot. Now it's in a bootloop, and I'm stuck at work with no phone.
Sprint sent me a new phone. Once I confirm it's got 1.5, they can have this 2.1-infected POS back.
Click to expand...
Click to collapse
Look... there's a good chance your new Hero WILL have 2.1 on it. If it does, just root it and install a custom 1.5 rom.
troublestylist said:
Tried Damagecontrol 2.09, did a clean wiped install, and everything seemed fine. Didn't seem much faster, but whatever.
Too bad I waited until I was at work to reboot. Now it's in a bootloop, and I'm stuck at work with no phone.
Click to expand...
Click to collapse
This might mean you simply didn't wipe everything before you flashed the new ROM. Always perform a full wipe before flashing new ROMs.
Take the battery out of your phone. Put it back in and reboot to Recovery (hold Home and press Power). Then select the Wipe option, and go down that list and wipe every single category (I do them each twice just to make sure).
Then go back to the main menu and flash the ROM again. That should probably solve any bootloop problems.
(I don't know if it works exactly this same way with the rooted 2.1 RUU [I'm still on rooted 1.5], so if any of the above is wrong, anybody please correct it...)
HeroMeng said:
Look... there's a good chance your new Hero WILL have 2.1 on it. If it does, just root it and install a custom 1.5 rom.
Click to expand...
Click to collapse
Yeah, I was thinking about that. If so, I might as well keep MY phone and install a 1.5 ROM on it. Less work, and they can have their "new" phone back.
chromiumleaf said:
This might mean you simply didn't wipe everything before you flashed the new ROM. Always perform a full wipe before flashing new ROMs.
Take the battery out of your phone. Put it back in and reboot to Recovery (hold Home and press Power). Then select the Wipe option, and go down that list and wipe every single category (I do them each twice just to make sure).
Then go back to the main menu and flash the ROM again. That should probably solve any bootloop problems.
(I don't know if it works exactly this same way with the rooted 2.1 RUU [I'm still on rooted 1.5], so if any of the above is wrong, anybody please correct it...)
Click to expand...
Click to collapse
Wow, so working with this ROM is like dealing with my kids. I have to tell it everything twice No thanks. Not worth the hassles.
2.1 doesn't do anything better that I can see. I'll deal with wired tethering considering how rarely I use it. The Navigation on 1.5 works better, or at least the voice recognition does.
Why exactly are you still using 1.5??? What custom 1.5 ROM would you guys recommend? Any that have ad hoc networking built in so I don't have to hack it myself?
Any that have ad hoc networking built in so I don't have to hack it myself?[/QUOTE]
Pretty sure all of them do.
Sure wish we could get WPA working for us....stupid kernel.
troublestylist said:
Wow, so working with this ROM is like dealing with my kids. I have to tell it everything twice No thanks. Not worth the hassles.
Click to expand...
Click to collapse
You don't have to do them all twice, I was just saying that I do to make sure -- personal preference. Considering how those wipe options only take like 1 second each, there is no "hassle" of which you speak. Adds maybe an extra 4 to 5 seconds to your day at most.
troublestylist said:
Why exactly are you still using 1.5??? What custom 1.5 ROM would you guys recommend? Any that have ad hoc networking built in so I don't have to hack it myself?
Click to expand...
Click to collapse
I'm not still on a 1.5 ROM, I just haven't yet updated my phone to stock 2.1 using the can't-ever-go-back-again 2.1 RUU. What I meant is that I still have the 1.5 root, but I have been using 2.1 ROMs over top of that for at least a couple months now. I think all these 2.1 ROMs are much faster than 1.5 ever was. Slow speed and lag were my biggest annoyances in stock 1.5.
We probably won't be able to answer all your questions or remove all your doubts. You won't know completely until you try some of them yourself.
If you look in the Wiki there are several 1.5 Roms out there that you can use. However, there are some apps that will only work with 2.1. Once your rooted you can flash any ROM from 1.5 or 2.1. You might also consider an AOSP rom which doesn't have Sense UI. But as I stated in another thread yesterday, most people end up adding apps to try and emulate certain characteristics of Sense UI. I don't like vanilla android, but it is supposed to be faster.
Here are all of the ROMs available. If you want a 1.5 Rom I would suggest Gumbo 1.5c, Modaco 2.2, or Fresh 1.1.
Thanks all. I honestly can't imagine how anyone could find 2.1 faster than 1.5, but I guess maybe once I'll reload 1.5, it may remind me. The "other half" of the people are (like me) saying the CPU can't handle the extra 2.1 features.
I never found 1.5 slow for anything other than phone calls. Now, those are WORSE, and the lag time to do anything else now exists, where it didn't before.
I ran DC all day, and it was just as annoying as the stock ROM. Maybe a little better in places, worse in others.
I guess I'm running "basic" stuff compared to all you guys running heavy apps or something.
Pancake 1.5 running now...refreshingly smoothly Yea, a bit of the glitz is gone, but wow, no lag.
And I have a Navigation program back that has a functional voice recognition. I hesitate to update because I'm not sure how far the revs go under 1.5. I don't want the new version back and I don't know if it's 2.1-only.
I know the winmo phones can dual boot winmo and android. They boor android from the sdcard.
Im wondering if we can get are phones to dual boot so we can have are working rom ect.... And we can dual boot into the secondary android from the sd card to test are mods
Sent from my Emotionless Beast of an Epic using the XDA App
The short answer is: no.
mysteryemotionz said:
I know the winmo phones can dual boot winmo and android. They boor android from the sdcard.
Im wondering if we can get are phones to dual boot so we can have are working rom ect.... And we can dual boot into the secondary android from the sd card to test are mods
Sent from my Emotionless Beast of an Epic using the XDA App
Click to expand...
Click to collapse
They can dual boot because Android is an open OS and is free. It would be illegal to put Winmo on our devices without paying for the proper license.
Also, for what possible reason would you even want to do this? To use as a reminder of how primitive Winmo looks and was compared to Android?
muyoso said:
They can dual boot because Android is an open OS and is free. It would be illegal to put Winmo on our devices without paying for the proper license.
Also, for what possible reason would you even want to do this? To use as a reminder of how primitive Winmo looks and was compared to Android?
Click to expand...
Click to collapse
I wanna dual boot with 2 separate sets of android for testing purposes
Sent from my Emotionless Beast of an Epic using the XDA App
I think yes, it would be possible. I wouldn't know how, but its been done on android before, and there is an alpha version being worked on already for the Sammy Moment at SDX and Samdroid.
And if this could be achieved it would be a great to help to developers.
I think I would like it just for the purpose of trying out new roms without having to give up my current rom, in case I don't like the new one.
RKight said:
I think I would like it just for the purpose of trying out new roms without having to give up my current rom, in case I don't like the new one.
Click to expand...
Click to collapse
if you do a full backup, flash a new ROM, restore data (only) and you don't like the new ROM, you can go back into recovery, restore full backup and voila.. you're back to the ROM you just backed up.
takes 3 minutes to do all this.
no need for dual boot IMO
daddymikey1975 said:
if you do a full backup, flash a new ROM, restore data (only) and you don't like the new ROM, you can go back into recovery, restore full backup and voila.. you're back to the ROM you just backed up.
takes 3 minutes to do all this.
no need for dual boot IMO
Click to expand...
Click to collapse
Certain themes with the battery percentage mode will cause boot problems from recovery
Sent from my Emotionless Beast of an Epic using the XDA App
daddymikey1975 said:
if you do a full backup, flash a new ROM, restore data (only) and you don't like the new ROM, you can go back into recovery, restore full backup and voila.. you're back to the ROM you just backed up.
takes 3 minutes to do all this.
no need for dual boot IMO
Click to expand...
Click to collapse
I'm aware of that process but if I'm just wanting to tinker with a new rom, I really don't want to go through all that trouble. If I want to try a new Linux distro on my PC, I'm not going to ghost it, install the new distro, then restore the old image later. I'm going to throw the new distro on a second hard drive and dual boot while I decide if I like it. That way, I have a known stable OS, configured the way I want, just a reboot away.
mysteryemotionz said:
Certain themes with the battery percentage mode will cause boot problems from recovery
Sent from my Emotionless Beast of an Epic using the XDA App
Click to expand...
Click to collapse
I have noticed this as well, and a flash with odin plus reinstalling clockworkmod is the only thing that prevents it from corrupting your backups for future use.
daddymikey1975 said:
if you do a full backup, flash a new ROM, restore data (only) and you don't like the new ROM, you can go back into recovery, restore full backup and voila.. you're back to the ROM you just backed up.
takes 3 minutes to do all this.
no need for dual boot IMO
Click to expand...
Click to collapse
I don't know. That's fine if you just want to try out a ROM one time, and quickly, or if you can do without your main ROM for a long time. I had a windows phone before I switched to Android. Having the "dual boot" was key to my switching to Android. I was able to install Android, set it up the way I wanted to (which took lots of time) and "play" with it whenever I had time, but at other times I needed to be able to switch back to my main phone. I'd switch a couple times a day sometimes (just a single click to go either way). After a couple of weeks of being able to work with Android I knew I'd be happy switching.
You could do something like this with backups and restores, but I honestly think it would get overly cumbersome. You'd have to backup your main ROM and then the second ROM. Every time you changed a setting or moved something around in either ROM you'd have to remember to make a new backup, or the next time you switched into that ROM all of your changes would be reverted back.
In any case, I don't know how possible it is to have dual boot, but I can certainly see a lot of advantages for some people.
HARET is what makes the WinMo android boot possible and is based on work done with soft/hard SPL. No Android equiv to HARET exists yet. However, a lot of work is happening with HBOOT due to the Vision G2 eMMC situation. I wouldn't be too far off if I were to speculate that an android HARET may be in our future.
Go check out this thread from the Eris forums. - Dual boot recovery hack
As I'm not intimately familiar with the inner workings of Clockwork, I don't know how plausible it is on the DX. It could either be really easy to port since we're already bootstrapped, or nearly impossible. That's a problem for a dev much smarter than me to conquer.
I will say that I tried it out on my Eris. The stock class 2 card was unbearably slow, a class 4 was tolerable, and a class 6 (which cost a small fortune) ran as if it was installed internally. Kinda neat, but not terribly practical for daily use.
hey!
Anyone have any good suggestions for a rom for HTC - Mytouch 4g? I am pretty much a n00b even though I manage to pull a complete ultimate true root and s=off lol.
i have the original tmobile stock rom though, is there a just Android 2.2 or Android 2.3 Vanilla rom for HTC mytouch 4g?!
I've seen EvilZ and Ice galicier , but I am not sure which one to go about .
Any (good) suggestions would really help!
thanks a bunch.
LimitsX said:
hey!
Anyone have any good suggestions for a rom for HTC - Mytouch 4g? I am pretty much a n00b even though I manage to pull a complete ultimate true root and s=off lol.
i have the original tmobile stock rom though, is there a just Android 2.2 or Android 2.3 Vanilla rom for HTC mytouch 4g?!
I've seen EvilZ and Ice galicier , but I am not sure which one to go about .
Any (good) suggestions would really help!
thanks a bunch.
Click to expand...
Click to collapse
Search the dev section for nightly CM7, Its very vanilla-ish gingerbread and very stable btw, some pros?...improved battery life, open to customization, overall a better looking ui, runs silky smooth, and the kernel supports oc up to 1.5
Sent from my rooted glacier running CM7 and grankin's oc kernel
Thanks man!
but are those CM-7 nightly ones stable though?! I won't likely experience any SD-memory card errors, wifi not working , and etc *the usual problems* lol.
I would like to remain at 1 Ghz for now LOL. Just need a vanilla android version with tons of customizations though!
Also, since my phone is currently "ultimate perm true rooted + s=off " , I installd Rom Manager and did a Flash clockworkMod Recovery, only once though. Should I do it again? (twice)?
So, can you please tell me what is the true purpose of CWM? I know you can use it to recover, but recover what exactly and how is that possible?
Let's say I decide to get the CM-7 nightly version, what do I do need to do? (any specific guide) ive read general guides and I believe I did the right things lol.
Now with regarding flashing, it flashes the NAND chip right? :S So the apps i have installed and other tmobile junk will be lost? like it would be a complete full format process (similar to PC?)?
Thanks again! I appreciate it and I am looking through the thread and googling to learn .
LimitsX said:
Thanks man!
but are those CM-7 nightly ones stable though?! I won't likely experience any SD-memory card errors, wifi not working , and etc *the usual problems* lol.
I would like to remain at 1 Ghz for now LOL. Just need a vanilla android version with tons of customizations though!
Also, since my phone is currently "ultimate perm true rooted + s=off " , I installd Rom Manager and did a Flash clockworkMod Recovery, only once though. Should I do it again? (twice)?
So, can you please tell me what is the true purpose of CWM? I know you can use it to recover, but recover what exactly and how is that possible?
Let's say I decide to get the CM-7 nightly version, what do I do need to do? (any specific guide) ive read general guides and I believe I did the right things lol.
Now with regarding flashing, it flashes the NAND chip right? :S So the apps i have installed and other tmobile junk will be lost? like it would be a complete full format process (similar to PC?)?
Thanks again! I appreciate it and I am looking through the thread and googling to learn .
Click to expand...
Click to collapse
1. Regarding how stable it is..its super stablr considering its still an alpha and i trust it enough to use it as my daily driver (i need 100% reliability and the phone has never let me down). Only known bugs are qik not working (and its a 2.3 compatibility issue rather than a rom issue) and you can use tango instead, ffc has a reverted x-axis effect xD..., mms might be blurry (which is fixed by changin the ua undr mms settings) and some may have other bugs i have not yet noticed
2. Your current 2.5 cwm will not work with gb, you will need to flash any 3.xxx version to install cm7. Cwm is designed to do backups of ur current working system and can be restored in the events of ur phone acting up (i.e bootloops or major issues...) although its also used to easily install .zip files (cm7 is a rom contained in .zip file and will need to be installes via recovery), its used also to wipe the system cache, dalvik cache and/or full wipes in the events of issues.
3. Here:
http://forum.xda-developers.com/showthread.php?t=916930#
Thats the nightly thread, you will have a "nightly" update you can flash thru recovery
4. If u go to cm7 you will have to (must) do a full wipe. Download titanium backup and back up ur existing apps and data (dont wanna lose ur angry birds progress), once cm7 is up just download tit bcup again and you'll have ur data back.
Hope this helped
Sent from my rooted glacier running CM7 and grankin's oc kernel
LimitsX said:
Thanks man!
but are those CM-7 nightly ones stable though?! I won't likely experience any SD-memory card errors, wifi not working , and etc *the usual problems* lol.
I would like to remain at 1 Ghz for now LOL. Just need a vanilla android version with tons of customizations though!
Also, since my phone is currently "ultimate perm true rooted + s=off " , I installd Rom Manager and did a Flash clockworkMod Recovery, only once though. Should I do it again? (twice)?
So, can you please tell me what is the true purpose of CWM? I know you can use it to recover, but recover what exactly and how is that possible?
Let's say I decide to get the CM-7 nightly version, what do I do need to do? (any specific guide) ive read general guides and I believe I did the right things lol.
Now with regarding flashing, it flashes the NAND chip right? :S So the apps i have installed and other tmobile junk will be lost? like it would be a complete full format process (similar to PC?)?
Thanks again! I appreciate it and I am looking through the thread and googling to learn .
Click to expand...
Click to collapse
one question at a time, bro.
1)the CM7 Nightlies are "Fairly" stable, though they do have bugs, as they are not fully complete (then again, no rom really is devoid of bugs and things to improve).
2)as for flashing CWM a second time, sometimes the recovery doesnt stick and when you boot into recovery, you will still go to the stock recovery. The second flash of CWM should fix this, and you should go to the CWM screen.
3) The purpose of CWM is to flash the various ROMs you'll find in the Development Section of this area. It also allows you to create nandroid backups, which will allow you to restore your phone to a specific state in time if something goes wrong or something (also helps to flash back to a rom without having to reinstall everything, which takes forever)
4)to flash a gingerbread (either CM7 or otherwise) you'll need to flash the CWM 3 to your phone manually, using the methods laid out in several threads in the Dev section. then you'll need to flash the rom, plus the Gapps for that rom (google apps like gmail, market, etc)
5)and yes, flashing a new rom will wipe all the data f(apps, accounts, call and text logs, etc) from the previous rom the previous (or youll need to do so before flashing). Now you see why you make nandroid backups also, using a backup application like titanium or MyBackup can make that process much simpler.
Arighty. I've been reading that CM-7 nightly thread for now!
I am excited now to flash it! Plus your suggestion and said it is the most vanillaish rom avaliable .
Okay, so I have Rom Manager Preimum that is 3.0.0.7 and since I flashed it currently, so CWM is 2.5.1.2 .
and I need CWM 3.x?
Regarding CWM 3.x? theres ClockworkMod 3.0.0.5 and clockwork-3-20110116-MT4G.img .
Which one of the above CWM 3.x, is better to use? Also, they are in .img format, so how would I go about flashing it?
this thread: http://forum.xda-developers.com/showpost.php?p=10670110&postcount=531
its using CWM 3.0.0.5 , is that a good method ?
And what happens to my current CWM 2.5.1.2? I already flashed it with that, do i need to "unflash" it ?
After that CWM, I use Titanium backup (i have pro version) to backup my apps + phone contacts right? I don't want to backup tmobile bloatware . I only the apps i paid for through android market.
And then, I download CM-7 and transfer it to my phone via usb cable to the sd card. Then use ROM Manager to flash it?!
thanks again!
jmwils3 said:
one question at a time, bro.
1)the CM7 Nightlies are "Fairly" stable, though they do have bugs, as they are not fully complete (then again, no rom really is devoid of bugs and things to improve).
2)as for flashing CWM a second time, sometimes the recovery doesnt stick and when you boot into recovery, you will still go to the stock recovery. The second flash of CWM should fix this, and you should go to the CWM screen.
3) The purpose of CWM is to flash the various ROMs you'll find in the Development Section of this area. It also allows you to create nandroid backups, which will allow you to restore your phone to a specific state in time if something goes wrong or something (also helps to flash back to a rom without having to reinstall everything, which takes forever)
4)to flash a gingerbread (either CM7 or otherwise) you'll need to flash the CWM 3 to your phone manually, using the methods laid out in several threads in the Dev section. then you'll need to flash the rom, plus the Gapps for that rom (google apps like gmail, market, etc)
5)and yes, flashing a new rom will wipe all the data f(apps, accounts, call and text logs, etc) from the previous rom the previous (or youll need to do so before flashing). Now you see why you make nandroid backups also, using a backup application like titanium or MyBackup can make that process much simpler.
Click to expand...
Click to collapse
Thank you bro!
I appreciate all that information and effort you put into it.
And yes, you are right. All roms have flaws, they all need to be worked out . But, this tmobile rom is just a bit annoying .
I posted a reply already, so I believe i know how to go about doing this CM-7 stuff...but just need to make sure I go the steps and necessary backup done.
thanks!
p.s. can you transfer phone contacts to simcard in this CM-7 rom? tombile has this option shut off for android 2.2 for G2 and MYT4G~! i know HTC Desire Z Bell's rom has the option to save contacts on the simcard, :S. Unless theres some other issue that i am not aware of it.
LimitsX said:
Thank you bro!
I appreciate all that information and effort you put into it.
And yes, you are right. All roms have flaws, they all need to be worked out . But, this tmobile rom is just a bit annoying .
I posted a reply already, so I believe i know how to go about doing this CM-7 stuff...but just need to make sure I go the steps and necessary backup done.
thanks!
p.s. can you transfer phone contacts to simcard in this CM-7 rom? tombile has this option shut off for android 2.2 for G2 and MYT4G~! i know HTC Desire Z Bell's rom has the option to save contacts on the simcard, :S. Unless theres some other issue that i am not aware of it.
Click to expand...
Click to collapse
well, Im running a Desire HD port (gorillaSense), so my rom has that feature, but I havent used CM7 in a little while. However, if you sync your contacts to google instead of t-mobile, youll have all of them no matter what rom you use, no matter if it has t-mobile contacts or sim card contacts or anything.
and yeah, the t-mobile rom is annoying, thats why I got off it as soon as I could and never looked back. Personally I prefer the Sense ROMs, but I can see the merits of the CM and AOSP ROMs too, its personal preference.
LimitsX said:
Thank you bro!
I appreciate all that information and effort you put into it.
And yes, you are right. All roms have flaws, they all need to be worked out . But, this tmobile rom is just a bit annoying .
I posted a reply already, so I believe i know how to go about doing this CM-7 stuff...but just need to make sure I go the steps and necessary backup done.
thanks!
p.s. can you transfer phone contacts to simcard in this CM-7 rom? tombile has this option shut off for android 2.2 for G2 and MYT4G~! i know HTC Desire Z Bell's rom has the option to save contacts on the simcard, :S. Unless theres some other issue that i am not aware of it.
Click to expand...
Click to collapse
K, so i checked the settings on the contact application and you can only export your stored contacts to the SD card, you are able to import from SIM but not to export to SIM. Like the post above stated though, as long as you are on an android phone you will have your contacts synced
Does anyone know of a dual booting recovery or a way that i can have two ROMS at once on my phone. That way i can freely switch on start up from cyanogen mod to MIUI.
giggz2010 said:
Does anyone know of a dual booting recovery or a way that i can have two ROMS at once on my phone. That way i can freely switch on start up from cyanogen mod to MIUI.
Click to expand...
Click to collapse
I don't know about having two ROM's at once but you could just make a backup of both CM7 and MIUI. It saves all your setting and only takes about 5 minutes to flash from one to the other.
I assume your referring to a nan-droid backup and if that's so i would love to do that but the issue with that is i have the default android software saved there. I would over write it but the fear of losing it and not being able to flash back in case i need to take my phone back to the store and get a new one. I have actually done this before and they accepted it because i flashed the factory software from a update on te HTC page, unfortunately there is no update from the original software on the HTC site for the shift.
You can make multiple backups through ROM manager. I have both a Cm7 and a MIUI backup saved to my SD card.
giggz2010 said:
I assume your referring to a nan-droid backup and if that's so i would love to do that but the issue with that is i have the default android software saved there. I would over write it but the fear of losing it and not being able to flash back in case i need to take my phone back to the store and get a new one. I have actually done this before and they accepted it because i flashed the factory software from a update on te HTC page, unfortunately there is no update from the original software on the HTC site for the shift.
Click to expand...
Click to collapse
No he is speaking of a dual boot recovery, where when I powered my phone up I could choose cm7 or I could choose miui to load, and I would have this choice everytime I booted.
Sent from my PG06100 using XDA Premium App
I've been looking for something like this for cm7 and sense dual booting.
Sent from my PG06100 using XDA Premium App
There was someone working on this on the heroc forum, but I'm unsure if it ever actually worked or not.
I would much rather choose upon booting then going through the rom manager. Although i have never tried what you were speaking of so I'll give that a shot. Hopefully i can get MIUI to stop randomly restarting itself so i can use the ROM.