Related
There is a bug on my Qtec 2020(FW:166)-
when someone calls me no signal goes to my QTEC(But the beep signal goes from calling phone)-sometimes signal goes only at the end of the call,and i see a call as missed.
what is it :?:
It is difficult to say exactly what could be causing this kind of problem.
Might I suggest some troubleshooting tips?
1. Backup your device
2. Hard-Reset
3. Try some incoming calls to see if they work correctly.
4a. If 3 did not fix, try flashing your ROM with the newest version.
5a. If that solves your problem, re-install all of your programs and you are finished.
6a. If it does not solve your problem, you may have a hardware problem, contact the vendor.
4b. If 3 did fix your problem, re-install your programs one-at-a-time, giving time for testing between loading programs. Only after you have proven that call reception still works do you install the next program. In this way you determine if a program you have loaded is causing your problem.
HTH!
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
chriswo said:
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
Click to expand...
Click to collapse
YES.YOU ARE RIGHT.
From your list i installed only POCKET ZEN PHONE(but i also had this problem before i'v installed PocketZenPhone).
WINDOWS/STARTUP:
AFlashMan
CFlashMan
CheckAutorun
ChgDflnk
IA_Caller_ID(MAYBE THIS IS BUG :?: -but i have not it ins.on my QTEC)
MMReg
NFlashMan
poutlook
stk
TFlashMan
GUYS,Please,help...
So,what causes the bug :?: :roll:
I am running PocketZenPhone also, and do not experience this problem.
Unfortunately, I still believe that a HR is the only way you can prove that the problem is caused by software you have installed and not the hardware. It sounds drastic, but you must start from a clean PPC and prove that it works, then figure out which software is causing the problem.
ok,i'll soon try it.
BUT i wanna hear from chriswo what to do,cos he got the same bug. :arrow:
I've got a similar sort of bug, not sure what causes it though and its a pain,
I cant get the volume slider for the phone to stay above zero, i raise it and it beeps as i do it, and i close the volume control, open it againg and it back at the bottom, If i recieve an incomming call, all that happens is the screen flashes with the incomming call alert but no ringing tone at all?
how are the phone settings set ?
as in ring type ?
and how are the sounds and notifications settings
just checked them and they all appeared to be ok, but i wend back in and changed my ring tone and then tried to change it back and it said
'this ring tone is not working properly, You may want to choose a different one to use.'
Very strange, so i am now using oldphone as my ring tone and it is working perfectly!, looks like one of my ring tones has got corrupted somehow
I had the same problem also
Fix by HARD RESET.
At that time I try to test many Phone edition program. (on XDA 1 2002).
After that everytime when I try to install some new program, I'll backup my data first.
so,i still waiting for chriswo,cos he knows this sort of bug...
Hi everybody,
I have this one problem. After 2 days of usage, my Hermes suddenly went mute. No vibration or screen click can be heard even If I changed it to the loudest. I missed a lot of calls and sms due to this problem. The only way to solve this problem that I employ is by soft-reset my device.
I really hope somebody can help me tracking to root-cause of this problem and in the same time providing or proposing a solution to it.
Kindly help. Regards
morisa
Device: DoPoD 838Pro
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Phone goes mute
I think I'm having that problem too. Just out of the blue it happened. Didn't install anything extra the whole week. But when someone calls it rings, and if it's missed, it doens't play the miss call tone... or any other sound in that case.
darky said:
did you unmute it from the speaker icon ?
if you have a backup restore it if not do a hard reset just make sure you backup your contacts/ stuff first
Click to expand...
Click to collapse
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
mmorisa said:
Hi,
I noticed that the problem started to happen when I long-press the "Green" Button to activate the speakerphone during a call instead of pressing the "Speaker On" menu on the screen.
I've no idea why but maybe that could be the problem. Presently, I have to press that "Speaker On" on-screen menu to activate the speakerphone to avoid this problem.
Maybe other users can confirm this problem.
Regards,
morisa
Click to expand...
Click to collapse
Got the same issue here and I don't use speakerphone
my pda´s auto mute so
No sound although speaker icon no in mute
I have the same problem. Out of the blue no sound is heard at all. I tried changing volume but it did not do any thing. Had to shut down (not soft reset) and restart device and it works fine. This happen several times and I can figure out why it does this.
If anyone can help...
Tal
Same here, I'm using a X01HT Softbank variant TYTN flashed with the latest HTC WWE rom and after about like 12 hours of use the device goes mute for some reason, making calls it works perfectly but playing sounds or ringers the speaker does not work. Anyone have any ideas? I'm thinking of maybe re flashing the device since most of my information is on my storage card. I'll see if that fixes the problem :-\.
same problem here....
Same here. Only a reboot fixes it.
I have the same problem but it only happens when using the speaker phone. After the call ends, then there are no more system sounds etc. I then have to soft reset, which pisses me off as I use the speaker phone plenty in the car.
If i dont use the speakerphone, then there is no problem. Kind of strange....
Has anyone got any ideas on how to solve this?
I have same problem. I thought it was software related, but seems that it is caused by the speaker phone. I had the exact same problem with my old IPAQ 6515. It must be a software issue with WM although the 6515 had WM2003SE and the TYTN has WM5 so I do not know. Really annoying though as I use this phone for an alarm and it never goes off because the sound turns off sometime while I am sleeping - Uhggggg!
I also have the problem. Only a Softreset brings the speaker back to live.
my new problem...misery loves company
same here; curiously 2 pages into this thread and there are no real solutions.
I have solved the problem on my TyTN.
The Midlet Manager is the root cause for the Phone Mute issue on my device.
lol I just started getting this issue out of the blue after a couple of months and I didn't install anything :|
yeah nothing but a soft reset brings the sound back
Happens to me too. Strange coincidence - I've just checked my m3100 and it's giving me the silent treatment now. Time for another soft reset
I never use Midlets, so that rules the above theory out for me. However my battery was almost dead. I was using WiFi at the time, which turned itself off when the warning notifications popped up. Maybe when the battery drops below an acceptable level it turns the sound off to save power, but doesn't restore it after charging?
nope it happens to me even if my battery is fully charged
this used to happen on my i-mate PDA2k, and my JasJar (Universal) running both WM5, AKU3.2, 3.3, 3.5 and unfortunately even WM6 :S
Hi All,
After checking and testing the phone. I found out that the only way for me to solve the muting problem is by silencing the notification sound when a new email arrives. Since I have an unlimited EDGE/GPRS, my push mail is working around the clock. Thus, by not having the new email sound notify, the muting problem gone. This is caused by the notification event locking up the sound and not releasing it even after I read the mail. Previously the only way to resolve is by soft-reset but now, no more.
I have no idea whether this work or not for others but you might try and post your solution here.
Regards,
morisa
In between testing Karmba and Schaps ROMs on my Trinity I realized that it was not ringing any more. Income calls get through, I can see the pop un in the screen but no audible ring. Music and every other audible notification is working fine.Last night I flashed back to Karmba a7.2 elias, and it started ringing, but this morning problem was there again. Any idea? Will be that soft or hard problem?
No ring
I have the same problem. I cannot get my phone to ring. I what WM6.1 and when you try and change the ring, it will revert back to "Ring-WindowsMob" and you can not exit the screen by hitting the "OK" button or the "OK" on the screen. Any help would be great.
Scott
I just have the same problem after a couple of moths using Faman 4.0 with no mayor issues, it stopped ringing, all other sounds or music are ok.
I had the same problem, because tha wma file format was associated to another player and not to the standard player...
http://www.freewarepocketpc.net/ppc-download-pmclean-v1-06.html
The Notification bug in Windows Mobile 2003 / WM 5.0 that causes slowdowns and alarm problems, i have resolved my problem with pmclean .
See also in main menu "Tools > Automatic Start"
sorry for my bad english,i'm italian people
Happened on my Xperia
I lost the incoming rings and the ability to change ringtone when I associated wma files with mortplayer.
I unchecked it in mortplayers settings and now everything is fine again.
Thanks speederi.
guys, it might be a 3rd party software that causes the issue. Did you guys install any other softwares that relates to audio before the problem occurs?
Like myself, i installed SRS WOW (and might did something wrong to it) - sounds were ok but after i turn off the device and wake it up, sounds are gone - actually it still plays, but very2 soft and you can hardly hear (even if i set the vol on max).
Doing an uninstall doesn't help at all. Luckily i had backup (using SPB) before installation, so i just restore back those data and got everything working back as normal.
Maybe more info would help for the rest to troubleshoots?
Wonder anyone got this problem, make outgoing call or incoming call, no voice from internal speaker. But if I press "Speaker On" during call I can hear the voice of the other party.
Playing music song playback sound ok, only during call conversations , both outgoing & incoming, I can't hear any sound unless I turn the speaker-phone on.
seems there is a problem in the phone speaker, though the main speaker is working properly.
Tried hard reset and also changed the SIM, but to no avail.
Any advice? Thanks.
Balendra
My problem has been solved. I had created a backup of my system with SPB backup and it restored my phone back.
I think the problem arose after installing oldSAP speaker phone, which routed the incoming and outgoing call audio via speakerphone.
However, I cant understand that if it was a software problem, why could'nt it be solved by Hard reset.
Any suggestions ?
Same Problem
hello guys !
I have the same problem. I Tried hard reset and also backup my system and nothing...What's this?
Any advice? Thanks.
Sony Ericsson Xperia
I also have this phone and i cant hear anybody during a call, i have tried resetting the phone, but still the same problem, if anybody knows a way to resolve this please let me knows i really like this phone
balendra68 said:
My problem has been solved. I had created a backup of my system with SPB backup and it restored my phone back.
I think the problem arose after installing oldSAP speaker phone, which routed the incoming and outgoing call audio via speakerphone.
However, I cant understand that if it was a software problem, why could'nt it be solved by Hard reset.
Any suggestions ?
Click to expand...
Click to collapse
My problem with the phone speakers resurfaced, sometimes they behaved and sometimes did'nt, thereby forcing me to turn the speakerphone on for listening to calls.
I finally took my phone to a nearby Mobile Repair Shop. The mechanic told me that it was a common problem in most phones and the only way out was to change the phone speakers. The speakers available were Chinese ones for Rs 150 and what he called original ones for Rs 300. I opted for the latter and he replaced the speakers within 5 minutes, whether he changed the speakers or just refittted the Originals after cleaning? I do'nt know. However, problem solved since then.
I have same problem for about 5months which was described in the first post, and can't solve this problem...any help?
I am also facing the exact problem!!! It was working fine until I accidently did the factory reset... now I have installlllled OS many times with diff vrs. & from stock to diff customized roms but the problem still persists!!!! wondering wat happened!!
Hi,
I'm using Omega ROM v20 for S4 GT-I9500, and I problem with the CALL Recording, everytime I try to record the call by pressing the Record button, the popup errors message always shows like "Media Scanning" or something like that, I've never been able to RECORD any calls.
Also I've tried with 3rd party apps, and try variation settings but the problem is the call can be recorded however, taking very long time since the calls have been made for about more than 30 secs to 2 minutes before Call Recording apps start to record my calls (Have tried LOTs of Call Recording apps via Google Play), but the problem still persists.
I don't know how to fix it, even I did a FULL WIPE and went back to ORIGINAL ROM (STOCK ROM), the problem still persists for BOTH problems above.
Please if anyone has experienced this problem and know how to fix it, or anyone has any good solutions, please share with me, I will be very appreciated that.
Thank you so much
Update to OMEGA v.22 -> HERE