Hello,
I am new here so hi everyone. I am in need of some help. I took my htc hero and cloned my metro phone i have disconnected my metro account and have went back to sprint(Couldn't go without data) and now i input all my information and it wont read it i did the QXDM program and used the RequestNVitemWrite meid 0xA1000000(meid) but it shows up as 1000000MEID and sprint wont authorize it how do i get it back to A1000000MEID?
Thank you
Related
I have an HTC touch 6900 (sprint) that is not active and with a clean (good) esn and i recently open a metropcs account and have the metro phone active and working . what i wanna do is change my touch and get it to work with metro, with the account that i have open, I already unlock the phone (i think) using vogueeunlockermfg2,31, i got my code with getspc and made some changes in the epst, at this point i was able to dial 611 and get metro, but nothing else, so i decided to change my esn for the metros phone that i have (instead of esn is meid (h) but everything went to hell at that point, lost epst, lost service and nothing would work, so i ended up putting the original rom from htc and the original esn, so im back on sprint, any ideas on how to do this right this time?, any suggestion will be appreciated
thanks
metropcs xv6900 flash firmware
did any ever post anything to resolve this problem?
Hi everyone, I hope I've posted this in the right place, if not, please redirect me (with my apologies).
I was trying to upgrade my phone to the CyanogenMod, following these directions. I had gotten to step 6 when I remembered I didn't need to flash my phone, because I had done so in months past, and then I ran into another problem. Everything started up, and then my phone decided not to connect to my cell phone data plan (so I couldn't get passed the "please enter your google account information" screen). I have the Google Developers Conference phone which is unlocked, and I currently live in Germany, I have a data plan with the company O2. Before I started messing around, my phone worked completely fine. I have a customer service e-mail with the APN information, typed it in, and it still cannot connect to the network.
My question is, either how do I wipe everything to start from the beginning, or where do I go to get the CyanogenMod onto my phone? I just need some guidance on where to go from here.
Thank you for your time.
I just bought an Sprint Htc mogul off of ebay. It was a good $30 bucks cheaper than a Verizon Mogul. WORST regret of my life. I thought I could just buy it, unlock it (which I did), and write the ESN (I have been spending hours on end trying to do this). I REALLY need help changing the esn to another phone, because Im going on vacation in about a week, and I dont have time to purchase another phone off of Ebay. My goal is to get this phone working on the Verizon Network. I have tried using CDMA workshop to change the esn, no luck, even after entering the correct SPC. I have tried to use CDMA workshop on another computer to and it still doesnt work. Other things ive tried to do: use QXDM to try to change the esn in the NV browser but it wont let me because its read only, I have tried to use EFS explorer to also get into the NVM folder and change the ESN, AND i've probabley tried to do something else I cant remember. PLEASE help if you can ,I need this working by next week. I know esn changing is usually illegal, but not in this case as I own the smartphone I want to clone, and I do not plan to do anything bad with this. Thank You
-Dany
NVM, got it working. Previously cdma workshop gave me an annoying Failed To change Esn error. But I supercid'ed it using mtty and WINDOWS XP - NOT vista, and after that using cdmaworkshop I succesfully changed the esn.
Move to general as not rom development
bought cdma workshop nov. 2011, free upgrade until nov. 2012. interested in transfering the license to you please leave a private message
My HTC Touch Pro was stolen on campus. Long story short I got my phone back but the thief flashed it to another carrier. I know very little about cell phone modification but would like to flash it back to Page Plus ( Verizon ) so I can use it again. Page Plus tech support won't help me but their Tech did have me pull up my ESN. Turns out the thief changed my ESN as well. Presumably to avoid being traced using my phone. The Page Plus Tech said a hard reset won't restore my phone to factory settings. Is that correct? I can't afford a new phone. I would be very grateful if some one could tell me exactly how to flash my phone back to Page Plus / Verizon and change my ESN back to the original one. I had Windows Mobile 6.1. It would be great if I could upgrade to 6.5 in this process. If not, that's ok 6.1 is fine.
Thanks
Jim
Hi, everyone. I'm new to thie forum.
A couple of years ago I bought a Galaxy S4 from eBay. It was a Sprint phone, flashed to be used at PagePlus, without UICC SIM card, 3G only. It has been working fine on PagePlus (except MMS).
Due to the lack of 4G and hearing the offers by RingPlus, I decided to move to RingPlus. I verified that the MEID and IMEI of the phone on R+ website, they both showed to be fine. So I terminated my PagePlus account, unrooted the phone back to original Samsung ROM for Sprint, and signed up for the Phoenix plan. Everything went well until this point.
I then followed the instruction on R+ website to complete the device activation for Android device (manually provisioning PRL), there's no response when I dialed "##MSL#" (the MSL is correct, as shown on my R+ account). I then tried to perform a PRL update by dialing ##72786#, the phone couldn't be activated. There's a message saying "Because of the type of account you have, we'll need to help you with the task. Please dial *2 from your Sprint phone or call Custom Care at 1-888-211-4727 from another phone so we can assist you."
I checked my MEID and IMEI again, and realized that even though the IMEI does show that it's a Galaxy S4, the MEID is actually associated with a Sanyo 3G phone. The eBay seller must have switched the MEID when flashing it to PagePlus. I didn't realize it until now. When I tried to dial a number using this phone now (after it's terminated from PagePlus), it was directed to Verizon Wireless.
From R+ forum I was told that my current MEID is a "donor MEID". I don't know what the original MEID was. The seller peeled off the sticker inside the phone. I only realized that today too.
So could anyone suggest what should I do? I was told that I need to flashed back to Sprint, but it will be difficult since I don't know the correct MEID. I was recommended to come to XDA to get some advance help. So here I'm.
Thank you very much for your help!
I went through the same process and it was a headache. You need to unflash your phone from Page Plus and reset it back to Sprint. This is going to take more than just unrooting and flashing a stock ROM.
I don't remember the exact instructions but you should Google "flash page plus back to sprint" and then look for Viper32's posts about flashing phones. There are instructions about entering ##RTN# in your dialer to reset the phone. Not sure if that was all it took because my experience was that I tried a lot of different things until one of them stuck. But that was where I started.
The easier way is possibly to take it to a Sprint store and have them reset it but I never tried it myself.