Related
Finally, i got my HD today. Everything is working fine, except for one thing.
I'm not able connect with my bluetooth carkit. I've tried severall things: Carkit searching my device, which was visible and device searching for carkit. Both without success
Anybody an idea what i'm doing wrong here?
This may sound like I'm being condescending, but I'm not. Have you tried turning it off and then back on? The HD has a couple of problems that are solved by a power cycle. If it still doesn't work, then is the carkit compatible with HTC's? It's not a Sony Ericsson one is it? Their Bluetooth tech isn't very pally with other devices.
Acelister said:
This may sound like I'm being condescending, but I'm not. Have you tried turning it off and then back on? The HD has a couple of problems that are solved by a power cycle. If it still doesn't work, then is the carkit compatible with HTC's? It's not a Sony Ericsson one is it? Their Bluetooth tech isn't very pally with other devices.
Click to expand...
Click to collapse
What do you mean with a power cycle?
I turned the device several times off. Performed several resets. No luck. The carkit is working fine with my old HTC 3600
The Bluetooth [for phone/A2DP etc] in WM is pretty retarded when you compare it with phone manufacturers like motorola and nokia who have had it down perfect for years now - it's one of may major gripes with WM (and why I can't wait for Android, then some clever person can hopefully develop a BT interface that WORKS properly...anyway) - I've not tried to hook mine up to the car yet [will try tonight] but if it's any consolation my Diamond took a few go's to get hooked up as well (in both cars - seemed to prefer the Parrot unit though)
Just one thing - you DO have the bluetooth set so that it is visible to other devices right? (I know that may sound a bit patronising, but I have to confess to one time getting really bent out of shape trying to hook up my headphones and eventualy realising that I hadn't set the phone to visible....ahem...)
***EDIT:
Later that day....
Ok - DITTO that - just tried many many times over and my HD will NOT connect to the Parrot 3200 in my car - NOT good [haven't tried the wifes car yet as I'm just too pi55ed off right now]. This unfortunately Is a deal breaker for me and I'll have to sell it on if it wont hook up (how retarded is that, even my humble ancient motorola works perfectly in the cars!)
***Second Edit:
Just FYI/update: Soft reset - and hooked up straight away. (So if you have issues, try a soft reset)
Got my HD yesterday, was able to pair Motorola S9 BT, both in headset and A2DP and listened to podcasts via RSS HUB. Today, nothing works!!!!
Tried soft-rebooting HD and restarting headset to no avail. HELP!
blackb1ade said:
The Bluetooth [for phone/A2DP etc] in WM is pretty retarded when you compare it with phone manufacturers like motorola and nokia who have had it down perfect for years now - it's one of may major gripes with WM (and why I can't wait for Android, then some clever person can hopefully develop a BT interface that WORKS properly...anyway) - I've not tried to hook mine up to the car yet [will try tonight] but if it's any consolation my Diamond took a few go's to get hooked up as well (in both cars - seemed to prefer the Parrot unit though)
Just one thing - you DO have the bluetooth set so that it is visible to other devices right? (I know that may sound a bit patronising, but I have to confess to one time getting really bent out of shape trying to hook up my headphones and eventualy realising that I hadn't set the phone to visible....ahem...)
***EDIT:
Later that day....
Ok - DITTO that - just tried many many times over and my HD will NOT connect to the Parrot 3200 in my car - NOT good [haven't tried the wifes car yet as I'm just too pi55ed off right now]. This unfortunately Is a deal breaker for me and I'll have to sell it on if it wont hook up (how retarded is that, even my humble ancient motorola works perfectly in the cars!)
***Second Edit:
Just FYI/update: Soft reset - and hooked up straight away. (So if you have issues, try a soft reset)
Click to expand...
Click to collapse
Same problem here. I was able to pair my HTC Touch HD with a JVC KW-NX7000 radio/Nav. On the display of the JVC I can see the batterypower of the HTC and the signal of my provider (Vodafone). My adresbook is transferred to the JVC, I can place a call from my JVC and then I get an error. When I turn on the screen of the HD Touch HD and then place a call on my JVC everything works fine. The problem seems to be, that the screen of the phone doesn't turn on when I place a call. When I dial a number on my phone, everything works fine.
I hope that someone has an answer to these problems.
I thought the problems had to do with the JVC but now I have my doubts.
Today I removed my bluetooth-connection and tried to make a new connection between my HTC Touch HD and the JVC KW-NX7000 radio/navigation in my car. On top of the screen of the HTC I saw two icons appear. (Left from the 3G icon)
I was surprised to see everything work, even though it was just for a short period. I could place a call from my JVC, the screen on my HTC turned on, the number was dialed and I got connected. At some point 1 of the 2 icons disappeared and again I wasn't able to make any calls from my JVC. The problem has something to do with those 2 icons which (should) appear when you make a bluetooth connection. I hope that somebody can help me with my problem.
Personally I think the bluetooth is bugged. This is what I have figured out when connecting my headset.
First time I paired everything worked fine. The paring profile was correct. There are two differnt profiles matched -1st the wireless stero and 2nd Headset
So this gives me two functions after pairing - 1 = listening music on my wirless headphones and 2 = making and recieving calls through the heahphones.
This gave me two icons - 1 being headphones with music symbol (wireless stero profile) 2 being headphones with another round symbol i cant make out (for the headset profile)
After you disconnect both the phone and headset the problems start. I turn on the blueooth on phone and headset, but I only get one symbol appear and thats the second one. This means i can use to make recieve call but not listen to music.
After along time messing about i found out that if you go back into the bluetooth device profiles and remove the tick for wirless stero and save config - then go back in and re-tick and then save evething starts working again until you disconnect again
I now have to do the remove tick and add tick everytime I want to use my bluetooth headset which is annoying. Thats why im conviced there are problems, so becareful when you setup as it might be working first time but you wont know unless u check it straight away on the initial pairing
james00000007 said:
Personally I think the bluetooth is bugged. This is what I have figured out when connecting my headset.
First time I paired everything worked fine. The paring profile was correct. There are two differnt profiles matched -1st the wireless stero and 2nd Headset
So this gives me two functions after pairing - 1 = listening music on my wirless headphones and 2 = making and recieving calls through the heahphones.
This gave me two icons - 1 being headphones with music symbol (wireless stero profile) 2 being headphones with another round symbol i cant make out (for the headset profile)
After you disconnect both the phone and headset the problems start. I turn on the blueooth on phone and headset, but I only get one symbol appear and thats the second one. This means i can use to make recieve call but not listen to music.
After along time messing about i found out that if you go back into the bluetooth device profiles and remove the tick for wirless stero and save config - then go back in and re-tick and then save evething starts working again until you disconnect again
I now have to do the remove tick and add tick everytime I want to use my bluetooth headset which is annoying. Thats why im conviced there are problems, so becareful when you setup as it might be working first time but you wont know unless u check it straight away on the initial pairing
Click to expand...
Click to collapse
Got excactly the same problem. Tried A2DPToggle but that thoes not work on my T-HD. Hope someby knows a tool or an answer for this.
absolutely agree , bluetooth is buggy !!!
sometimes I am loosing the connection to my car , sometimes it worked fine for hours , sometimes only for minutes
if I am listening to music (ds980) and receive a call, the connection to hear music is lost after closing the call
if I have some longer calls, sometimes the connection drops
so at the moment bluetooth @ HD is absolutely not stable !
buggy BT still happening?
Had issues with Nokia E71 randomly dropping/reconecting BT ... sometimes dropping during a call ... sold it on eBay
Brought Omnia i900 - Voice over BT headset does not work ... (but now a fix has been found over at modaco.com so happy)
was seriously looking at touch HD but will not if this thread is correct as sick of paying out good $$$ and finding a must have feature is not working
Q. has a fix been found or is BT still buggy
thanks
Bluetooth Problem
I think the problem may have something to do with multi-function devices (make and receive calls + stream music) I'm having problems with my Jabra
SP700 ,pairs no problem , 2 icons in top bar , can make calls and play music. Switch off phone or Jabra and then reconnect I can only make calls, no music, even though the 2 icons are displayed in top bar. I also have a Sony Erricson external speaker and a pair of Sony headphones both of which work fine no problem. Is this something that can be fixed with updated bluetooth drivers for HD?
I want to use my TD2 with my bluetooth handsfree set, but it starts the mediaplayer, everytime a connection was established. Is there a way to prevent windows mobile to start the mediaplayer in this szenario?
Tube
I have the same issue, but its when pairing with my car stereo (Bluetooth handfree), but it also start streaming music through the line1 connection to my car stereo !!!
Funny I always wanted to do this, but could not, so went the integrated Ipod route, now I can I don't bloody want it.
Anyway, so far no solution
Same story to me. Also issue's bluetooth. when i want to controll my phone with bluetooth, it starts mediaplayer automaticly.
Hello, does anyone have a solution for this problem? my girlfriend has the same problem.
Have you tried disabling the "wireless stereo" (A2DP) service? Go to Comms manager-Bluetooth-Advanced, then tap and hold on the offending item till the menu comes up, choose "edit", then uncheck "Wireless stereo", leaving just the handsfree profile checked.
I'm assuming you're not interested in the stereo music function, of course!
Already tried that, if you do that you lose BT to the car.
Odd as there are three connections:
- Hands free;
- Wireless stereo;
- Serial port.
Trying any combination aside from handsfree & wireless stereo on, results in losing BT via the car stereo
obsydian said:
Already tried that, if you do that you lose BT to the car.
Odd as there are three connections:
- Hands free;
- Wireless stereo;
- Serial port.
Trying any combination aside from handsfree & wireless stereo on, results in losing BT via the car stereo
Click to expand...
Click to collapse
Have you tried pairing it again from scratch rather than modifying the existing profile? If you delete the car stereo from the list, and then re-pair them using the windows pairing dialogue (rather than the TF3D one) I think you get the chance to specify right from the start which profiles you want to use before you connect,if I remember right.
You might even need to delete the TD2's registration info in your car stereo, if possible, either through the menu of the stereo, or by registering another basic phone before trying the TD2 again. This would work if your car stereo can only store the details of one bluetooth device at a time.
As a last resort you could try disabling A2DP on the TD2 through the registry.
Bluetooth has come a long way, I remember when it was complete crap, now it usually goes smoothly, but every now and then the crap side shows up again and causes massive frustration. I've got a Parrot Party speaker, which when there's a break of more than 15 seconds or so in the music from the TD2, the connection lapses. It still looks like it's connected, on both units, but it's not. You have to turn the speaker off, close the music player app, then re-link both for it to work again. I'm sorry it's off-topic, just venting about the "crap side" of Bluetooth.
Pete_S said:
Have you tried pairing it again from scratch rather than modifying the existing profile? If you delete the car stereo from the list, and then re-pair them using the windows pairing dialogue (rather than the TF3D one) I think you get the chance to specify right from the start which profiles you want to use before you connect,if I remember right.
You might even need to delete the TD2's registration info in your car stereo, if possible, either through the menu of the stereo, or by registering another basic phone before trying the TD2 again. This would work if your car stereo can only store the details of one bluetooth device at a time.
As a last resort you could try disabling A2DP on the TD2 through the registry.
Bluetooth has come a long way, I remember when it was complete crap, now it usually goes smoothly, but every now and then the crap side shows up again and causes massive frustration. I've got a Parrot Party speaker, which when there's a break of more than 15 seconds or so in the music from the TD2, the connection lapses. It still looks like it's connected, on both units, but it's not. You have to turn the speaker off, close the music player app, then re-link both for it to work again. I'm sorry it's off-topic, just venting about the "crap side" of Bluetooth.
Click to expand...
Click to collapse
Thanks, i've tried every which way so far, but the problem remains, I found the only workaround is to remove any today or touchflo music tabs, at least that stops my TD2 steaming and drawing battery. Instead it opens windows media player, but i've purposely left that empty so at least nothing is being played (i.e. drawing power)
Bluetooth has come a long way, thats so funny you say that, I always wanted to be able to do this, but now my ipod is integrated into my car i don't.
Has anyone figured this out yet? Windows Media Player starts when connecting to the bluetooth factory fitted car kit when I don't want it to !
Is there a reg hack to stop Windows Media Player starting when the pairing takes place on the car's ignition?
Thanks!
T-back's 6.5 BT driver.cab
I had the same problem and I solved it installing T-back's 6.5 BT driver.cab
http://forum.xda-developers.com/showthread.php?t=545737&highlight=t-back+bt+driver
I am not sure whether T-back's 6.5 BT driver.cab has some drawbacks as claimed in the above thread, I am using pocketmusic on my Topaz wm6.5.1 italian paired with a parrot mk6000, still have some minor issues I can live with
Hi
I have the T-Mobile G2 Touch and a Motorola S9 headphones. Using the Origianl Stock T-Mobile ROM i have had no issues with bluetooth.
BUT
using the generic 2.73 ROM i have issues with connecting to the headset
It will connect, then instantly disconnect, then try to connect again, at which point it fails to connect properly
To Reproduce:
Using a HTC Hero & 2.73 ROM
Pair your S9's with the Hero
then Turn off the S9's and Bluetooth
Then turn on Bluetooth, and the S9's with the Bluetooth Settings up
you will see it say "Connected with Media", "Paired but not Connected", then "Connecting......." at which point it will fail
I have tried all the different radio versions to make sure it isnt a issue with the radio, but the same problem prevails.
Does anyone have any ideas on how to fix this issue? or what is causing it?
I also had issues with an unlocked Hero and a Sennheiser MM200 headset. Worked perfectly on original rom, but very fiddly to setup with the 2.73 rom.
The only way I can get them to work properly with the phone is to:
1) Make sure headset is turned off, as well as bluetooth on phone
2) Turn on headset
3) Then turn on bluetooth on phone
Headset connects as normal - any other sequence doesn't work.
I have tried this, and it doesnt seem to work. I have been trying it for the last hour.
While in Bluetooth Settings it says its connected with media, then is disconnects, then it trys to connect again, and then it just says "Connecting.........." for ages
The Headset light flashes as if it was connected.
I also had problems connecting MM200. I could connect it, but then it kinda stuck when i was pressing play button.
But then i decided to check my old sony ericsson bluetooth headset - it was working normally. And after that the MM200 also was working. One wonders.
Still i've noticed some stuttering problems when song starts. And it seems to start with faster tempo and then slow down after 10 seconds to normal speed (could be related to that stuttering? Trying to compensate for the lost time or something). No issues when i'm listening to wired headphones - so it must either something with hero bluetooth or MM200.
I have to check how it works with my old headset, but i'm kinda afraid of having MM200 connection problems again.
Ok
i will keep playing around. i have some CX-300II coming next week so i have a backup plan if i cant get the bluetooth stuff working properly
Thanks for your help
raywiper said:
I also had problems connecting MM200. I could connect it, but then it kinda stuck when i was pressing play button.
But then i decided to check my old sony ericsson bluetooth headset - it was working normally. And after that the MM200 also was working. One wonders.
Still i've noticed some stuttering problems when song starts. And it seems to start with faster tempo and then slow down after 10 seconds to normal speed (could be related to that stuttering? Trying to compensate for the lost time or something). No issues when i'm listening to wired headphones - so it must either something with hero bluetooth or MM200.
I have to check how it works with my old headset, but i'm kinda afraid of having MM200 connection problems again.
Click to expand...
Click to collapse
I think the speeding up / slowing down and stuttering is more to do with the Hero - I have tried the headset connected to a laptop and there is no problem whatsoever. Hopefully the next Android update will improve the bluetooth problems.
not compatible with new mazda 3
Well the hero is probably the best phone ive had and ive had many many phones over the years including the jesus phone which was pants.
Well ive just bought a new mazda 3 and unfortunately the hero does not like connecting to the car via bluetooth. tried all sorts. sometimes it works but usually only for a couple of times and then manages to lock the car radio up.
So its bye bye hero for me as i need a compatable phone for my car. looks like its back to nokia...shame as i really love the phone
Hi all,
Does anybody has tested the HD mini with a Bluetooth headset? More precisely, does the screen keep locked during and after a call answered through a Bluetooth device?
(This is not the case with my current HD2 and locking the hard keys prevents to answer calls from a bluetooth headset... this is not good at all. As the HD mini has different keys for End Call and for Power On/Off, its behavior may be different.)
Another one : aren't the bottom hard keys (which seems to be capacitive, as the screen digitizer, but are they?) too sensitive? Do they tend to end a call when speaking, the phone being held against the cheek?
Have a nice day!
I dunno about the bluetooth stuff as I dont have a headset.
With regards to the buttons, the device has a proximity sensor which turns off the screen and buttons when it's close to your face.
debully said:
With regards to the buttons, the device has a proximity sensor which turns off the screen and buttons when it's close to your face.
Click to expand...
Click to collapse
Thank you very much, that's a good point.
I have had my mini for 4 days now, first ever HTC and got to say very impressed. I was on a long run in the car yesterday and used the Bluetooth a few times, I have a Bluetooth headset in the car for streaming music and obviously hands free phone calls.
Il start with the music side; using the standard HTC music player I found that when being played the music would cut out (maybe once or twice) after first setting it up but then be seamless from that point. I have noticed though that when going back to use the Mini (car stationary of course) the music would begin to cut out again. I don’t know if this is the music player or the connection but this has just left me to resort to setting up a playlist then using the car headset to change tracks.
As for the phone, if you have it plugged into the cigarette lighter (very useful for charging without the phone being away from your side) it wont go into standby mode, although the first call i received I used the Mini’s answer button to answer which appeared to cut off the Bluetooth and answer the call as normal, not the best situation to be in when you are driving. The 2nd phone call i got i used the car headset answer button which kept the Bluetooth running.
The only other big issue is that every time I get into the car I have to manually setup the connection from my phone to the car headset, I don’t know if this is meant to be like this or I have missed a setting any advice in this area would be useful
Cheers
Thank you, Q22ube, for you input.
My usage of a bluetooth headset is quite different since, most of the time, I use the phone with a motorcycle helmet headset (Cardo Scala Rider G4) so the phone is in a pocket or in a bag, running on its own battery, and I have no physical access to the device while riding . For now, I am using a HTC HD2 (which is a very nice device but a little too big to use it one hand) and music streaming through Bluetooth A2DP is quite good. I also had to setup a playlist since, by default, the HTC Sence music player will use nearly all music tracks available on the device, including some system sound .
Q22ube said:
I have had my mini for 4 days now, first ever The only other big issue is that every time I get into the car I have to manually setup the connection from my phone to the car headset, I don’t know if this is meant to be like this or I have missed a setting any advice in this area would be useful
Cheers
Click to expand...
Click to collapse
I don't known how works your headset (or car embedded Bluetooth system) but, most of the times you have to pair the audio device with the phone:
set the audio device in pairing mode (according to its user's manual);
go to the Bluetooth control panel of the phone;
from here, search for a new headset (e.g. click "add new headset");
when found, select the audio device and then follow the pairing procedure displayed on the phone screen;
usually, you have to enter a pairing code which should be found in the headset (or car) users's manual (most of the times it is 0000) or only click "OK".
Usually, this pairing procedure must be done only once. After that, provided Bluetooth is already turned on on the phone, you only have to switch on your headset (your car embedded audio system) and it will automatically connect to the phone. If the audio system is already on when you enter your car with your phone, you may have to switch it off and on again to start the bluetooth connection.
It is possible that your audio car system is always searching for known phones and then, the previous paragraph may not apply but I have no experience with such systems (only with some plain headsets).
One last point: please, do not leave Bluetooth in discoverable mode on your phone all the time and double check your Bluetooth security settings... Nobody should discover your phone if you don't want that and no unknown (malicious) device should be able to connect to it.
Cheers
Hi Q22ube and darthrider,
I've had my mini for one day only and found that the bluetooth device partnering is not "for life"
In my nokia formerly, I only needed to pair my gps with the phone once and that would be it! They never needed to be paired each and every time I wanted to use the two together like the mini does now.
I don't think that is normal ... Can you share with me your experiences? I use the GPS a great deal and is the main reason why I bought this phone (because it's the last wm phone and garmin's software only runs on wm and symbian) so it's irritating to have to go through so many steps every time I come back to the car.
Found the solution
Hello again,
After another good many hours of fiddling with the phone I discovered that the Bluetooth button that you find in the "Wireless Controls" tab under "Settings" brings you to "Comm Manager" which is actually a BTWizard.exe
What it should have been is "BTManager.exe" which you can find in Windows directory. This is the exe. file that allows you to launch and find paired devices automatically without needing to constantly repair.
I created a .lnk file in the Windows/Programs/ directory to BTManager.exe, put it into one of my quicklaunch panels and now I can switch on my BT, open the port and go straight into my Garmin programme without needing to repair my BT receiver.
Paired for life!
yes working fine
Dear Friend
i have a BT Headset using it with my HD Mini and i am seraching browsing phone normally while talking in headset during a phone call
just press home key and do what ever you want , even i have video recording during call
Hi ikelew,
ikelew said:
After another good many hours of fiddling with the phone I discovered that the Bluetooth button that you find in the "Wireless Controls" tab under "Settings" brings you to "Comm Manager" which is actually a BTWizard.exe
What it should have been is "BTManager.exe" which you can find in Windows directory. This is the exe. file that allows you to launch and find paired devices automatically without needing to constantly repair.
I created a .lnk file in the Windows/Programs/ directory to BTManager.exe, put it into one of my quicklaunch panels and now I can switch on my BT, open the port and go straight into my Garmin programme without needing to repair my BT receiver.
Paired for life!
Click to expand...
Click to collapse
I did not notice the paring problem you described since I opened the Bluetooth Manager from "Sense Settings Tab > Menu > More > Bluetooth". This opens the true Bluetooth Manager and not the Bluetooth Wizard. Happily, you have found another solution.
I think that the Comm Manager should launch the Bluetooth Manager instead of the Bluetooth Wizard.
Regards
I'm having much fun with my new Legend, and I love android 2.1!
Everythings goes smooth except the connection with my car.
I have a pretty new Audi TT from 2008, and with my old phone (t-mobile G1), I used it without a problem for over a year.
One month ago I bought the Legend, and bluetooth connection to the car seems to hang!, Even when I disable bluetooth, the phone becomes slow, and the bluetooth icoon keeps displaying in my notification erea.
One thing works, when I reset the phone, I can use the carkit for about 10 minutes, then it starts to disconnect. The adress book never syncs.
Can people please reply if they got their legend work properly with their bluetooth car kit.
Also when other people have problems, please reply here!
Thnx
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Same problem here. Kenwood DDX7029 with BT. 5 out of 10 times the phone won't connect when starting the car. Dis- and enabling BT does the trick.
David67 said:
I have a mini cooper S with BT car kit.
The connection is good and all the contats are correctly transferred but sometimes the connection has been lost.
It seems it happens during the net switch (between UMTS/GSM).
Click to expand...
Click to collapse
This implies that if you disable data-roaming, it would work all the time?, I'm gonna try that out! Thanks for your reply!
Hi there. My first post in XDA
So cool that I found this thread because I have the exact same problem. I have an Audi A3 and the bluetooth connection is 9 out of 10 times lost during conversations and then the bluetooth icon just hangs until I boot the phone.
I'm gonna try to disable the data-roaming and see whether it works.
Still problem carkit/bluetooth Legend!!
Hi all,
I still/also experience problems with my Audi A4 carkit.
Also my colleague with a Opel Insignia experiencing the same problems.
I have to reset the bluetooth or reboot the phone te fix it
It is very annoying when you loose the bluetooth connection within a call.
I have already sent a message to HTC...and still waiting!
Switching off the data roaming or fix the UMTS/GSM settings doesn't help
Somebody a sollution?
Br Dide
Audi UHV 6654 problems
I have a BIG problem with this car kit connection...BIG means the device is useless till now.
I've paired the Legend with my A4 factory car kit and there are several problems:
1. No sounds come from the speakers (car speakers), still the michrophone is working fine. I had to put the phone on loudspeaker to hear something but of course this is not the normal way of using a car kit
2. There is no sound till the call is actually ongoing (the other party respond)...that means no ringing, busy tone, or whatsoever sound... I don't even know if the call is made if I'm not looking to the phone (and if it's entering power saving mode, I stare at a blank screen).
I don't have any problems of this kind using a Nokia phone and also they (especially point 2) are happening with all smartphones I've tried (WinMo or Android ones).
Is there any software (even a paid one) to outcome this?
Please don't tell me to "try" this and that, I don't want to spend money "trying" things...I would appreciate if someone had a similar problem and managed to solve it somehow.
P.S The phone is brand new (got it for 2 days by now) and it is not rooted.
P.S.2 The car kit is a "basic" one, don't have navigation, contacts downloading and all that stuff...It's a plain BT car kit, I would just like to be able to make and receive phone calls with it.
Seems like many have bad experience in making the legend and car kit work together.
As of yet I could only pair my legend with my blaupunkt audio system, but they have not yet connected each other successfully to make use of the bluetooth feature. I've had no problem at all using my audio set with my samsung galaxy spica's bluetooth. So it probably is not an android issue.
Is there anyone who didn't experience any such trouble with their legend and car audio system's bluetooth ?
To add some more details...
I search for BT devices, phone finds the Audi UHV car kit. Then I'm asked for the pairing password and I enter it, than I get that "connection sound" from the car speakers but the phone is still "connecting..." endlessly. The BT icon on the phone appears but is the standard one, no headset or car kit icon appears (does it have such an icon after all?)
From here...nothing special happens. When I make or receive a call only the phone is ringing, no sounds came from the car speakers. Only when the call is connected, then I have the bord computer showing "Call..." and the radio/CD is muted...and that's all. The conversation can be heard only into the phone not from car speakers as it was the case with the ringing tone before. When call ends, music resumes.